[Wireless] Dell Inspiron 1501 Wifi BCM4328 802.11a/b/g/n 1500 Draft 802.11nWLAN Mini-card
Inviato: lunedì 10 marzo 2008, 17:48
Ciao a tutti, sono nuovo in linux e non riesco a far riconoscere ad ubuntu la mia scheda wireless.
Ho un Dell Inspiron 1501 con scheda Wifi Broadcom BCM4328 802.11a/b/g/n Wireless 1500 Draft 802.11nWLAN Mini-card.
Quello che ho fatto è stato: installare ndiswrapper, scaricare i driver (quelli con cui ho provato sono: R129083.EXE, R140747.EXE, R151517.EXE),
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
lspci
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2)
00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3)
00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/ Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS485 [Radeon Xpress 1100 IGP]
05:00.0 Network controller: Broadcom Corporation BCM4328 802.11a/b/g/n (rev 03)
08:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
08:01.0 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
08:01.1 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 01)
i file sys e inf sono in una cartella driver/DRIVER già estratti dall'EXE
sudo ndiswrapper -i driver/DRIVER/bcmwl5.inf
installing bcmwl5 ...
forcing parameter IBSSGMode from 0 to 2
e ripete questa riga un po' di volte
ndiswrapper -l
bcmwl5 : driver installed
device (14E4:4328) present
bcmwl5a : driver installed
sudo depmod -a
sudo modprobe ndiswrapper
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
Qundi non è cambiato niente. Dove sbaglio?
Qual'è il driver corretto tra R129083.EXE, R140747.EXE, R151517.EXE o altri?
Dopo queste operazioni, che devo fare?
Ah, nei driver con restrizioni non sono presenti quelli della scheda wifi.
Ho un Dell Inspiron 1501 con scheda Wifi Broadcom BCM4328 802.11a/b/g/n Wireless 1500 Draft 802.11nWLAN Mini-card.
Quello che ho fatto è stato: installare ndiswrapper, scaricare i driver (quelli con cui ho provato sono: R129083.EXE, R140747.EXE, R151517.EXE),
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
lspci
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2)
00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3)
00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/ Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS485 [Radeon Xpress 1100 IGP]
05:00.0 Network controller: Broadcom Corporation BCM4328 802.11a/b/g/n (rev 03)
08:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
08:01.0 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
08:01.1 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 01)
i file sys e inf sono in una cartella driver/DRIVER già estratti dall'EXE
sudo ndiswrapper -i driver/DRIVER/bcmwl5.inf
installing bcmwl5 ...
forcing parameter IBSSGMode from 0 to 2
e ripete questa riga un po' di volte
ndiswrapper -l
bcmwl5 : driver installed
device (14E4:4328) present
bcmwl5a : driver installed
sudo depmod -a
sudo modprobe ndiswrapper
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
Qundi non è cambiato niente. Dove sbaglio?
Qual'è il driver corretto tra R129083.EXE, R140747.EXE, R151517.EXE o altri?
Dopo queste operazioni, che devo fare?
Ah, nei driver con restrizioni non sono presenti quelli della scheda wifi.