sudo smartctl -a /dev/sdc
Inviato: domenica 20 gennaio 2013, 11:56
Come da titolo ho eseguito il comando sudo smartctl -a /dev/sdc ed ho ottenuto questo:
qui la traduzione:
Ho agito così perchè ho intenzione di recuperare un HD... Qualcuno mi spiega come agiro in conseguenza a tale risultato?
Codice: Seleziona tutto
=== START OF INFORMATION SECTION ===
Device Model: FUJITSU MHY2200BH
Serial Number: K43JT7926BVG
Firmware Version: 0000000B
User Capacity: 200,049,647,616 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 3f
Local Time is: Sun Jan 20 11:26:42 2013 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 811) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 115) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 047 046 Pre-fail Always - 196700912272428
2 Throughput_Performance 0x0005 100 100 030 Pre-fail Offline - 46465024
3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Always - 1
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 2363
5 Reallocated_Sector_Ct 0x0033 094 094 024 Pre-fail Always - 7941404426572
7 Seek_Error_Rate 0x000f 100 100 047 Pre-fail Always - 20
8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 086 086 000 Old_age Always - 7038
10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2270
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 241
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 3666
194 Temperature_Celsius 0x0022 100 001 000 Old_age Always - 33 (Lifetime Min/Max 14/80)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 21633
196 Reallocated_Event_Count 0x0032 094 094 000 Old_age Always - 4725473612
197 Current_Pending_Sector 0x0012 091 091 000 Old_age Always - 10
198 Offline_Uncorrectable 0x0010 093 093 000 Old_age Offline - 14
199 UDMA_CRC_Error_Count 0x003e 200 253 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000f 100 100 060 Pre-fail Always - 1144520
203 Run_Out_Cancel 0x0002 100 100 000 Old_age Always - 3732193671607
240 Head_Flying_Hours 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 28248 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 28248 occurred at disk power-on lifetime: 7022 hours (292 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 00 00 00 e0 Error: UNC 1 sectors at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 20 01 00 00 00 e0 00 00:05:03.955 READ DMA EXT
c6 20 10 01 00 00 ef 00 00:05:03.955 SET MULTIPLE MODE
91 20 3f 01 00 00 ef 00 00:05:03.955 INITIALIZE DEVICE PARAMETERS [OBS-6]
10 20 01 01 00 00 e8 00 00:05:03.938 RECALIBRATE [OBS-4]
00 20 01 01 00 00 00 04 00:05:03.938 NOP [Reserved subcommand]
Error 28247 occurred at disk power-on lifetime: 7022 hours (292 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 00 00 00 e0 Error: UNC 1 sectors at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 20 01 00 00 00 e0 00 00:04:57.163 READ DMA EXT
c6 20 10 01 00 00 ef 00 00:04:57.163 SET MULTIPLE MODE
91 20 3f 01 00 00 ef 00 00:04:57.163 INITIALIZE DEVICE PARAMETERS [OBS-6]
10 20 01 01 00 00 e8 00 00:04:57.126 RECALIBRATE [OBS-4]
00 20 01 01 00 00 00 04 00:04:57.126 NOP [Reserved subcommand]
Error 28246 occurred at disk power-on lifetime: 7022 hours (292 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 00 00 00 e0 Error: UNC 1 sectors at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 20 01 00 00 00 e0 00 00:04:50.370 READ DMA EXT
25 20 01 00 00 00 e0 00 00:04:45.462 READ DMA EXT
c6 20 10 01 00 00 ef 00 00:04:45.461 SET MULTIPLE MODE
91 20 3f 01 00 00 ef 00 00:04:45.461 INITIALIZE DEVICE PARAMETERS [OBS-6]
10 20 01 01 00 00 e8 00 00:04:45.425 RECALIBRATE [OBS-4]
Error 28245 occurred at disk power-on lifetime: 7022 hours (292 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 00 00 00 e0 Error: UNC 1 sectors at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 20 01 00 00 00 e0 00 00:04:45.462 READ DMA EXT
c6 20 10 01 00 00 ef 00 00:04:45.461 SET MULTIPLE MODE
91 20 3f 01 00 00 ef 00 00:04:45.461 INITIALIZE DEVICE PARAMETERS [OBS-6]
10 20 01 01 00 00 e8 00 00:04:45.425 RECALIBRATE [OBS-4]
00 20 01 01 00 00 00 04 00:04:45.424 NOP [Reserved subcommand]
Error 28244 occurred at disk power-on lifetime: 7022 hours (292 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 00 00 00 e0 Error: UNC 1 sectors at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 20 01 00 00 00 e0 00 00:04:38.650 READ DMA EXT
c6 20 10 01 00 00 ef 00 00:04:38.649 SET MULTIPLE MODE
91 20 3f 01 00 00 ef 00 00:04:38.649 INITIALIZE DEVICE PARAMETERS [OBS-6]
10 20 01 01 00 00 e8 00 00:04:38.613 RECALIBRATE [OBS-4]
00 20 01 01 00 00 00 04 00:04:38.612 NOP [Reserved subcommand]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 7030 -
# 2 Extended offline Aborted by host 90% 7029 -
# 3 Extended offline Completed: read failure 90% 7005 49489071
# 4 Short offline Completed: read failure 90% 6992 49489071
# 5 Short offline Completed: read failure 90% 6992 49489071
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Codice: Seleziona tutto
=== INIZIO DI INFORMAZIONI SEZIONE ===
Dispositivo Modello: FUJITSU MHY2200BH
Numero di serie: K43JT7926BVG
Versione firmware: 0000000B
Capacità utente: 200.049.647.616 byte
Il dispositivo è: non nel database smartctl [dettagli per l'uso:-P showall]
ATA versione è: 8
ATA standard è: ATA-8-ACS revisione 3f
Ora locale è: Dom Gen 20 2013 11:26:42 CET
Supporto SMART è: disponibile - dispositivo è dotato di funzionalità di SMART.
Supporto SMART è: Abilitato
=== INIZIO DI LEGGERE SEZIONE Smart Data ===
SMART-salute generale di auto-valutazione dei risultati di test: SUPERATO
Generali Valori SMART:
Offline informazioni Stato di raccolta: (0x00) Offline raccolta dei dati di attività
non è mai stato avviato.
Auto Collection Offline dati: Disabilitato.
Autotest stato di esecuzione: (121) La precedente auto-test completato con
l'elemento di lettura del test fallito.
Il tempo totale per completare la linea
raccolta dei dati: (811) secondi.
Non in linea di raccolta dei dati
capacità: (0x7b) SMART esecuzione immediata non in linea.
Auto la raccolta dati offline on / off supporto.
Sospendere la riscossione sulla nuova linea
comando.
Scansione della superficie non in linea supportati.
Self-test sostenuto.
Trasporto auto-test sostenuto.
Selective Self-test sostenuto.
Funzionalità SMART: (0x0003) Salva i dati SMART prima di entrare
modalità di risparmio energetico.
Supporta SMART timer di salvataggio automatico.
Errore funzionalità di registrazione: (0x01) Errore registrazione da usare.
Registrazione General Purpose supportato.
Breve di auto-test di routine
tempo di polling consigliato: (2) minuti.
Di auto-test di routine
polling tempo consigliato: (115) minuti.
Trasporto di auto-test di routine
tempo di polling consigliato: (2) minuti.
Capacità SCT: (0x003d) Stato SCT supportato.
Funzione di controllo SCT supportato.
SCT tabella di dati supportati.
SMART attributi dei dati il numero di revisione Struttura: 16
Fornitore Attributi specifici SMART con Soglie:
ID # ATTRIBUTE_NAME FLAG peggior tipo VALORE SOGLIA AGGIORNATO WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000F 100 047 046 Pre-fail Always - 196700912272428
2 Throughput_Performance 0x0005 100 100 030 Pre-fail Non in linea - 46465024
3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Sempre - 1
4 Start_Stop_Count 0x0032 099 099 000 Old_age sempre - 2363
5 Reallocated_Sector_Ct 0x0033 094 094 024 Pre-fail Always - 7941404426572
7 Seek_Error_Rate 0x000F 100 100 047 Pre-fail Sempre - 20
8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail Non in linea - 0
9 Power_On_Hours 0x0032 086 086 000 Old_age sempre - 7038
10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age sempre - 2270
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age sempre - 241
193 Load_Cycle_Count 0x0032 100 100 000 Old_age sempre - 3666
194 Temperature_Celsius 0x0022 100 001 000 Old_age Sempre - 33 (Lifetime Min / Max 14/80)
195 Hardware_ECC_Recovered 0x001A 100 100 000 Old_age Sempre - 21633
196 Reallocated_Event_Count 0x0032 094 094 000 Old_age Sempre - 4725473612
197 Current_Pending_Sector 0x0012 091 091 000 Old_age Sempre - 10
198 Offline_Uncorrectable 0x0010 093 093 000 Offline Old_age - 14
199 UDMA_CRC_Error_Count 0x003e 200 253 000 Old_age Sempre - 0
200 Multi_Zone_Error_Rate 0x000F 100 100 060 Pre-fail Always - 1144520
203 Run_Out_Cancel 0x0002 100 100 000 Old_age Sempre - 3732193671607
240 Head_Flying_Hours 0x003e 200 200 000 Old_age Sempre - 0
SMART Log Versione di errore: 1
ATA Error Count: 28248 (log dispositivo contiene solo i più recenti cinque errori)
CR = registro di comando [HEX]
FR = Caratteristiche Registrati [HEX]
SC = Settore registro conteggio [HEX]
SN = Settore Numero del registro [HEX]
CL = Registra Cilindro a basso [HEX]
CH = Registro del cilindro ad alta [HEX]
DH = Dispositivo / Testa Registro [HEX]
DC = Registra dispositivo di comando [HEX]
ER = Errore del registro [HEX]
ST = Stato del registro [HEX]
Powered_Up_Time è misurata dall'accensione, e stampati come
Ddd + hh: mm: SS.sss dove DD = giorno, hh = ore, mm = minuti,
SS = sec, e sss = millisecondi. E '"avvolge" dopo 49,710 giorni.
Errore 28248 verificato all'accensione su disco tutta la vita: 7022 ore (292 giorni + 14 ore)
Quando il comando che ha causato l'errore, il dispositivo è attivo o inattivo.
Dopo il completamento del comando si è verificato, i registri sono stati:
ER ST SC SN CL CH DH
--------------
40 51 01 00 00 00 E0 Errore: UNC 1 settori a LBA = 0x00000000 = 0
Comandi conducono al comando che ha causato l'errore sono:
CR FR SC SN CL CH DH DC Powered_Up_Time Comando / FEATURE_NAME
-------------------------------------------------- -
25 20 01 00 00 00 E0 00 00:05:03.955 LEGGI DMA EXT
c6 20 10 01 00 00 EF 00 00:05:03.955 MODE SET MULTIPLO
91 20 3f 01 00 00 EF 00 00:05:03.955 inizializzare i parametri del dispositivo [OBS-6]
10 20 01 01 00 00 e8 00 00:05:03.938 RICALIBRARE [OBS-4]
00 20 01 01 00 00 00 04 00:05:03.938 NOP [Riservato sottocomando]
Errore 28247 verificato all'accensione su disco tutta la vita: 7022 ore (292 giorni + 14 ore)
Quando il comando che ha causato l'errore, il dispositivo è attivo o inattivo.
Dopo il completamento del comando si è verificato, i registri sono stati:
ER ST SC SN CL CH DH
--------------
40 51 01 00 00 00 E0 Errore: UNC 1 settori a LBA = 0x00000000 = 0
Comandi conducono al comando che ha causato l'errore sono:
CR FR SC SN CL CH DH DC Powered_Up_Time Comando / FEATURE_NAME
-------------------------------------------------- -
25 20 01 00 00 00 E0 00 00:04:57.163 LEGGI DMA EXT
c6 20 10 01 00 00 EF 00 00:04:57.163 MODE SET MULTIPLO
91 20 3f 01 00 00 EF 00 00:04:57.163 inizializzare i parametri del dispositivo [OBS-6]
10 20 01 01 00 00 e8 00 00:04:57.126 RICALIBRARE [OBS-4]
00 20 01 01 00 00 00 04 00:04:57.126 NOP [Riservato sottocomando]
Errore 28246 verificato all'accensione su disco tutta la vita: 7022 ore (292 giorni + 14 ore)
Quando il comando che ha causato l'errore, il dispositivo è attivo o inattivo.
Dopo il completamento del comando si è verificato, i registri sono stati:
ER ST SC SN CL CH DH
--------------
40 51 01 00 00 00 E0 Errore: UNC 1 settori a LBA = 0x00000000 = 0
Comandi conducono al comando che ha causato l'errore sono:
CR FR SC SN CL CH DH DC Powered_Up_Time Comando / FEATURE_NAME
-------------------------------------------------- -
25 20 01 00 00 00 E0 00 00:04:50.370 LEGGI DMA EXT
25 20 01 00 00 00 E0 00 00:04:45.462 LEGGI DMA EXT
c6 20 10 01 00 00 EF 00 00:04:45.461 MODE SET MULTIPLO
91 20 3f 01 00 00 EF 00 00:04:45.461 inizializzare i parametri del dispositivo [OBS-6]
10 20 01 01 00 00 e8 00 00:04:45.425 RICALIBRARE [OBS-4]
Errore 28245 verificato all'accensione su disco tutta la vita: 7022 ore (292 giorni + 14 ore)
Quando il comando che ha causato l'errore, il dispositivo è attivo o inattivo.
Dopo il completamento del comando si è verificato, i registri sono stati:
ER ST SC SN CL CH DH
--------------
40 51 01 00 00 00 E0 Errore: UNC 1 settori a LBA = 0x00000000 = 0
Comandi conducono al comando che ha causato l'errore sono:
CR FR SC SN CL CH DH DC Powered_Up_Time Comando / FEATURE_NAME
-------------------------------------------------- -
25 20 01 00 00 00 E0 00 00:04:45.462 LEGGI DMA EXT
c6 20 10 01 00 00 EF 00 00:04:45.461 MODE SET MULTIPLO
91 20 3f 01 00 00 EF 00 00:04:45.461 inizializzare i parametri del dispositivo [OBS-6]
10 20 01 01 00 00 e8 00 00:04:45.425 RICALIBRARE [OBS-4]
00 20 01 01 00 00 00 04 00:04:45.424 NOP [Riservato sottocomando]
Errore 28244 verificato all'accensione su disco tutta la vita: 7022 ore (292 giorni + 14 ore)
Quando il comando che ha causato l'errore, il dispositivo è attivo o inattivo.
Dopo il completamento del comando si è verificato, i registri sono stati:
ER ST SC SN CL CH DH
--------------
40 51 01 00 00 00 E0 Errore: UNC 1 settori a LBA = 0x00000000 = 0
Comandi conducono al comando che ha causato l'errore sono:
CR FR SC SN CL CH DH DC Powered_Up_Time Comando / FEATURE_NAME
-------------------------------------------------- -
25 20 01 00 00 00 E0 00 00:04:38.650 LEGGI DMA EXT
c6 20 10 01 00 00 EF 00 00:04:38.649 MODE SET MULTIPLO
91 20 3f 01 00 00 EF 00 00:04:38.649 inizializzare i parametri del dispositivo [OBS-6]
10 20 01 01 00 00 e8 00 00:04:38.613 RICALIBRARE [OBS-4]
00 20 01 01 00 00 00 04 00:04:38.612 NOP [Riservato sottocomando]
SMART Self-test log numero di revisione struttura 1
Num Stato LifeTime Test_Description rimanente (ore) LBA_of_first_error
# 1 Estesa offline Completed: errore di lettura 90% 7030 -
# 2 Estesa linea interrotta dall'host 90% 7029 -
# 3 Ampi offline Completed: errore di lettura 90% 7005 49489071
# 4 Breve offline Completed: errore di lettura 90% 6992 49489071
# 5 breve offline Completed: errore di lettura 90% 6992 49489071
SMART selettiva di auto-test log dei dati il numero di revisione struttura 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selettivi di auto-test bandiere (0x0):
Dopo la scansione campate selezionati, non leggono la scansione resto del disco.
Se selettiva auto-test è in attesa all'accensione, riprendere dopo 0 minuti di ritardo.