Spero che sia l'inizio di una serie di MINI-HOWTO per le varie tipologie di macchine SUN SOLARIS.
La versione che ho installato di UBUNTU e':
fosinet@ik2ws203:~$ ubunturelease
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 6.06.1 LTS
Release: 6.06
Codename: dapper
Il file ISO che io ho scaricato e' del 16 Giugno 2006 versione 6.06 (ubuntu-6.06-server-sparc.iso) che poi tramite un aggiornamento online e' diventata la 6.06.1
'sudo apt-get dist-upgrade'
Adesso si puo' scaricare direttamente la versione 6.06.1
http://ubuntu-releases.cs.umn.edu/6.06. ... -sparc.iso
NOTA: da Giugno ad oggi ho cercato di installare 3 volte la versione EDGY (Ubuntu 6.10 (Edgy Eft) Beta) ma non mi ha mai funzionato.
Spero che la versione stabile che e' prevista per fine ottobre funzioni.
Quindi si installa la versione SERVER ricordanto il problema di versione del OBP (Open Boot PROM) delle macchine SUN:
http://www.ubuntuforums.org/showthread. ... hlight=OBP
Questo e' un link molto utile per eseguire comandi di amministratore di una macchina SUN SOLARIS:
http://www.sunshack.org/data/sh/1.1/wcd ... .htm#REFER
Una volta installato il SERVER passiamo all'installazione dell'ambiente X.
Vi sono tre possibilita' di installazione:
GNOME: "sudo apt-get install ubuntu-desktop"
KDE: "sudo apt-get install kbuntu-desktop"
XCFE: "sudo apt-get install xbuntu-desktop"
Il piu' performate in assoluto e' XCFE! ... io ho provato GNOME e XCFE ... mi manca KDE.
La mia macchina ha 2 GByte di RAM quindi anche GNOME va alla grande.
Quindi ho eseguito il comando:
sudo apt-get install ubuntu-desktop
Questo comando installa tutto l'ambiente X e l'unica cosa importante da selezionare e' il device della scheda video: sunffb
Leggete i due forum che hanno aiutato anche me:
http://www.ubuntuforums.org/showthread. ... ght=sunffb
http://www.ubuntuforums.org/showthread. ... post955542
Comunque se qualcosa non funziona si puo' riconfigurare il pacchetto installato con questo comando:
sudo dpkg-reconfigure xserver-xorg
La frequenza e risoluzione del proprio monitor e' un dato comunque da conoscere perche' richiesto durante la riconfigurazione del Server X
La scheda grafica di una ULTRA 60 e' questa (i sistemisti SUN mi hanno passato questo link!):
http://www.spec.org/gpc/June99/plb/Sun/ ... tor3D.html
Una volta installato comunque io consiglio di eseguire il login testuale e poi eseguire tramite startx il server grafico.
Questo si puo' fare modificando i due file:
/etc/inittab (mettere runlevel a 3)
/etc/init.d/gdm (cambiare il nome a qusto file)
Per verificare quale "display manager" si sta usando basta eseguire il comando:
cat /etc/X11/default-display-manager
Poi tutto mi ha funzionato senza problemi.
Metto in allegato il file di configurazione:
/etc/X11/xorg.conf
Io lavoro su un monitor con risoluzione:
1280 X 1024 con depth 24
Spero che questo possa aiutare chi vuole installare UBUNTU su una SUN Solaris Ultra60.
NOTA: ricordatevi che pero' NON e' ancora a disposizone la versione di JAVA SUN Solaris che NON sara' neppure in prossima uscita per la versione 6.10.
https://help.ubuntu.com/community/Java
Questo e' l'unica grossa mancanza di UBUNTU su SUN SOLARIS perche' per il resto funziona molto bene!
Ciao e buon lavoro!
###########################################################
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "Generic Video Card"
Driver "sunffb"
Option "UseFBDev" "true"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-70
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1400x1050" "1280x1024" "1280x768" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1400x1050" "1280x1024" "1280x768" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1400x1050" "1280x1024" "1280x768" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1400x1050" "1280x1024" "1280x768" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1400x1050" "1280x1024" "1280x768" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1400x1050" "1280x1024" "1280x768" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
MINI-HOWTO per installare SERVER X su una SUN ULTRA 60
-
- Prode Principiante
- Messaggi: 3
- Iscrizione: giovedì 5 ottobre 2006, 21:09
Re: MINI-HOWTO per installare SERVER X su una SUN ULTRA 60
grande grazie grazie sei stato veramente gentile appena riesco provo e ti faccio sapere ciao e grazie ancora
- Stealth
- Tenace Tecnocrate
- Messaggi: 17343
- Iscrizione: martedì 31 gennaio 2006, 22:55
- Desktop: Gnome
- Distribuzione: Ubuntu 22.04 LTS
Re: MINI-HOWTO per installare SERVER X su una SUN ULTRA 60
Complimenti per l' How To e anche per la tenacia (yes)
Al momento, aspettando qualche riscontro, lo mettiamo in evidenza nella board
ciao
Al momento, aspettando qualche riscontro, lo mettiamo in evidenza nella board
ciao
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 7 ospiti