problema su Herd3

[effemme8]

come sapete...e se non lo sapete potete leggerlo su http://forum.ubuntu-it.org/viewtopic.ph ... 34#p349234

posso finalmente anche darvi una mano...o scocciare (dipende dai punti di vista)
a trovare problemi/soluzioni su questa versione

io debbo avere necessariamente almeno 2 utenze....e quando swappo per passare all'altra,
la 2° si blocca ( si blocca pure il mouse) subito dopo la comparsa del desktop ( dopo aver inserito la pwd)

se poi premo ctrl+alt+f7 posso tornare ( e lavorare ) con la normale utenza...ma non posso utilizzare "mai" la 2°




....naturalmente la cosa accade anche se entro immediatamente dopo l'avvio...nella 2° utenza : in questo caso, è la 1° utenza a non lavorare mai

insomma, se deve lavorare mia moglie.....bisogna riavviare : comodo no ?

[effemme8]

è un problema conosciuto ..... che anche altri hanno .... oppure nonjenepo'frega'dimeno ?

[DktrKranz]

Non ho mai provato a effettuare il cambio utente, in questi giorni provo a fare qualche test.

[effemme8]

Non ho mai provato a effettuare il cambio utente, in questi giorni provo a fare qualche test.

ALTRO PROBLEMA ( lo inserisco qua perchè così mi hanno consigliato )

il boot dura veremente tanto ( rispetto alla 5.04 )
dove posso trovare il file dove risultano le segnalazioni....cosicchè possa avere indicazioni ?

[DktrKranz]

dove posso trovare il file dove risultano le segnalazioni....cosicchè possa avere indicazioni ?

A quale file ti riferisci?

[effemme8]

dove posso trovare il file dove risultano le segnalazioni....cosicchè possa avere indicazioni ?

A quale file ti riferisci?

Il mio boot ( su portatile ) ha la durata di qualche minuto ( almeno 80 sec. ) : mi sembra veramente tanto.

Probabilmente ci sono delle segnalazioni che potrebbero essere utili per capire se inserire delle options durante il boot ( queste segnalazioni le leggo "al volo" se premo ALT+F1....mi pare )

Dopo che è partito X , quindi Ubuntu .... queste segnalazioni rimangono scritte in qualche file ?

[DktrKranz]

Se non erro ti riferisci ai vari messaggi di avvio. Puoi visualizzarli per mezzo del comando dmesg.

[effemme8]

Se non erro ti riferisci ai vari messaggi di avvio. Puoi visualizzarli per mezzo del comando dmesg.

Ho appena effettuato tutti gli aggiornamenti ( quindi ho acquisito il nuovo kernet 20.8 )
ma la ripartenza è sempre lenta...lenta...lenta....

spero in un vs. aiuto, quindi riporto il risultato del comando DMESG :

franco@franco-laptop:~$ dmesg
[    0.000000] Linux version 2.6.20-8-generic (root@vernadsky) (gcc version 4.1.2 20070129 (prerelease) (Ubuntu 4.1.1-31ubuntu2)) #2 SMP Tue Feb 13 05:18:42 UTC 2007 (Ubuntu 2.6.20-8.14-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000d8000 size: 0000000000028000 end: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fd90000 end: 000000001fe90000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000001fe90000 size: 000000000000d000 end: 000000001fe9d000 type: 3
[    0.000000] copy_e820_map() start: 000000001fe9d000 size: 0000000000063000 end: 000000001ff00000 type: 4
[    0.000000] copy_e820_map() start: 000000001ff00000 size: 0000000000100000 end: 0000000020000000 type: 2
[    0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010006000 end: 00000000f0006000 type: 2
[    0.000000] copy_e820_map() start: 00000000f0008000 size: 0000000000004000 end: 00000000f000c000 type: 2
[    0.000000] copy_e820_map() start: 00000000fed20000 size: 0000000000070000 end: 00000000fed90000 type: 2
[    0.000000] copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001fe90000 (usable)
[    0.000000]  BIOS-e820: 000000001fe90000 - 000000001fe9d000 (ACPI data)
[    0.000000]  BIOS-e820: 000000001fe9d000 - 000000001ff00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 510MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 130704) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]  DMA            0 ->    4096
[    0.000000]  Normal      4096 ->  130704
[    0.000000]  HighMem    130704 ->  130704
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]    0:        0 ->  130704
[    0.000000] On node 0 totalpages: 130704
[    0.000000]  DMA zone: 32 pages used for memmap
[    0.000000]  DMA zone: 0 pages reserved
[    0.000000]  DMA zone: 4064 pages, LIFO batch:0
[    0.000000]  Normal zone: 989 pages used for memmap
[    0.000000]  Normal zone: 125619 pages, LIFO batch:31
[    0.000000]  HighMem zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP (v000 PTLTD                                ) @ 0x000f6780
[    0.000000] ACPI: RSDT (v001  Sony      V0 0x20051108 PTL  0x00000000) @ 0x1fe97449
[    0.000000] ACPI: FADT (v002  Sony      V0 0x20051108 PTL  0x00000050) @ 0x1fe9ce78
[    0.000000] ACPI: MADT (v001  Sony      V0 0x20051108 PTL  0x00000050) @ 0x1fe9cefc
[    0.000000] ACPI: BOOT (v001  Sony      V0 0x20051108 PTL  0x00000001) @ 0x1fe9cfd8
[    0.000000] ACPI: MCFG (v001  Sony      V0 0x20051108 PTL  0x0000005f) @ 0x1fe9cf9c
[    0.000000] ACPI: SSDT (v001  Sony      V0 0x20051108 PTL  0x20030224) @ 0x1fe983aa
[    0.000000] ACPI: SSDT (v001  Sony      V0 0x20051108 PTL  0x20030224) @ 0x1fe97d0e
[    0.000000] ACPI: SSDT (v001  Sony      V0 0x20051108 PTL  0x20030224) @ 0x1fe978c9
[    0.000000] ACPI: SSDT (v001  Sony      V0 0x20051108 PTL  0x20030224) @ 0x1fe976aa
[    0.000000] ACPI: SSDT (v001  Sony      V0 0x20051108 PTL  0x20030224) @ 0x1fe97491
[    0.000000] ACPI: DSDT (v001  Sony      V0 0x20051108 PTL  0x0100000e) @ 0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:13 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[    0.000000] Detected 1729.023 MHz processor.
[    9.050590] Built 1 zonelists.  Total pages: 129683
[    9.050594] Kernel command line: root=UUID=b9085971-0b2c-45ec-ba24-9c54e522467c ro quiet splash locale=it_IT
[    9.050760] mapped APIC to ffffd000 (fee00000)
[    9.050763] mapped IOAPIC to ffffc000 (fec00000)
[    9.050766] Enabling fast FPU save and restore... done.
[    9.050768] Enabling unmasked SIMD FPU exception support... done.
[    9.050777] Initializing CPU#0
[    9.050855] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    9.053251] Console: colour VGA+ 80x25
[    9.053418] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    9.053610] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    9.065737] Memory: 507612k/522816k available (1979k kernel code, 14608k reserved, 882k data, 324k init, 0k highmem)
[    9.065747] virtual kernel memory layout:
[    9.065748]    fixmap  : 0xfff4e000 - 0xfffff000  ( 708 kB)
[    9.065749]    pkmap  : 0xff800000 - 0xffc00000  (4096 kB)
[    9.065750]    vmalloc : 0xe0800000 - 0xff7fe000  ( 495 MB)
[    9.065751]    lowmem  : 0xc0000000 - 0xdfe90000  ( 510 MB)
[    9.065753]      .init : 0xc03d1000 - 0xc0422000  ( 324 kB)
[    9.065754]      .data : 0xc02eecb4 - 0xc03cb6d4  ( 882 kB)
[    9.065755]      .text : 0xc0100000 - 0xc02eecb4  (1979 kB)
[    9.065759] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[    9.142829] Calibrating delay using timer specific routine.. 3461.76 BogoMIPS (lpj=6923534)
[    9.142867] Security Framework v1.0.0 initialized
[    9.142874] SELinux:  Disabled at boot.
[    9.142889] Mount-cache hash table entries: 512
[    9.143014] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
[    9.143025] CPU: L1 I cache: 32K, L1 D cache: 32K
[    9.143027] CPU: L2 cache: 2048K
[    9.143030] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000
[    9.143047] Checking 'hlt' instruction... OK.
[    9.158908] SMP alternatives: switching to UP code
[    9.159069] Freeing SMP alternatives: 11k freed
[    9.159142] ACPI: Core revision 20060707
[    9.164126] CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
[    9.164153] Total of 1 processors activated (3461.76 BogoMIPS).
[    9.164349] ENABLING IO-APIC IRQs
[    9.164550] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[    9.310810] Brought up 1 CPUs
[    9.311031] Booting paravirtualized kernel on bare hardware
[    9.311119] Time: 19:22:16  Date: 01/21/107
[    9.311144] NET: Registered protocol family 16
[    9.311222] EISA bus registered
[    9.311225] ACPI: bus type pci registered
[    9.311234] PCI: Using MMCONFIG
[    9.311935] Setting up standard PCI resources
[    9.318612] ACPI: Interpreter enabled
[    9.318614] ACPI: Using IOAPIC for interrupt routing
[    9.319004] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    9.319010] PCI: Probing PCI hardware (bus 00)
[    9.319937] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[    9.319941] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[    9.320137] Boot video device is 0000:01:00.0
[    9.320407] PCI: Firmware left 0000:06:08.0 e100 interrupts enabled, disabling
[    9.320549] PCI: Transparent bridge - 0000:00:1e.0
[    9.320608] PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#07) (try 'pci=assign-busses')
[    9.320611] Please report the result to linux-kernel to fix this permanently
[    9.320634] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    9.327405] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    9.328621] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    9.329498] ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
[    9.329711] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[    9.329918] ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *5
[    9.330126] ACPI: PCI Interrupt Link [LNKD] (IRQs *10)
[    9.330335] ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
[    9.330544] ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *3
[    9.330752] ACPI: PCI Interrupt Link [LNKG] (IRQs *10)
[    9.330978] ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
[    9.332994] Linux Plug and Play Support v0.97 (c) Adam Belay
[    9.333001] pnp: PnP ACPI init
[    9.334783] pnp: PnP ACPI: found 10 devices
[    9.334786] PnPBIOS: Disabled by ACPI PNP
[    9.334822] PCI: Using ACPI for IRQ routing
[    9.334824] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    9.335177] PCI: Bridge: 0000:00:01.0
[    9.335179]  IO window: disabled.
[    9.335182]  MEM window: 90000000-afffffff
[    9.335185]  PREFETCH window: c0000000-cfffffff
[    9.335194] PCI: Bus 7, cardbus bridge: 0000:06:05.0
[    9.335197]  IO window: 00002400-000024ff
[    9.335202]  IO window: 00002800-000028ff
[    9.335207]  PREFETCH window: 30000000-33ffffff
[    9.335212]  MEM window: 34000000-37ffffff
[    9.335217] PCI: Bridge: 0000:00:1e.0
[    9.335220]  IO window: 2000-2fff
[    9.335225]  MEM window: b0000000-b00fffff
[    9.335229]  PREFETCH window: 30000000-33ffffff
[    9.335241] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[    9.335245] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    9.335255] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    9.335273] ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 21 (level, low) -> IRQ 17
[    9.335297] NET: Registered protocol family 2
[    9.370796] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    9.370856] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    9.370947] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    9.370994] TCP: Hash tables configured (established 16384 bind 8192)
[    9.370997] TCP reno registered
[    9.382852] checking if image is initramfs... it is
[    9.984031] Freeing initrd memory: 6447k freed
[    9.984265] Simple Boot Flag at 0x36 set to 0x1
[    9.984476] audit: initializing netlink socket (disabled)
[    9.984492] audit(1172085737.012:1): initialized
[    9.984609] VFS: Disk quotas dquot_6.5.1
[    9.984628] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    9.984677] io scheduler noop registered
[    9.984681] io scheduler anticipatory registered
[    9.984683] io scheduler deadline registered
[    9.984692] io scheduler cfq registered (default)
[    9.984947] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    9.984966] assign_interrupt_mode Found MSI capability
[    9.984996] Allocate Port Service[0000:00:01.0:pcie00]
[    9.985028] Allocate Port Service[0000:00:01.0:pcie03]
[    9.985132] isapnp: Scanning for PnP cards...
[  10.340095] isapnp: No Plug & Play device found
[  10.362884] Real Time Clock Driver v1.12ac
[  10.362945] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[  10.363614] mice: PS/2 mouse device common for all mice
[  10.364124] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[  10.364265] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[  10.364270] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[  10.364548] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[  10.367733] serio: i8042 KBD port at 0x60,0x64 irq 1
[  10.367737] serio: i8042 AUX port at 0x60,0x64 irq 12
[  10.367852] EISA: Probing bus 0 at eisa.0
[  10.367862] Cannot allocate resource for EISA slot 1
[  10.367864] Cannot allocate resource for EISA slot 2
[  10.367891] EISA: Detected 0 cards.
[  10.397977] TCP cubic registered
[  10.397985] NET: Registered protocol family 1
[  10.397990] NET: Registered protocol family 8
[  10.397992] NET: Registered protocol family 20
[  10.398024] Using IPI No-Shortcut mode
[  10.398087] ACPI: (supports S0 S3 S4 S5)
[  10.398133]  Magic number: 11:391:395
[  10.398370] Time: tsc clocksource has been installed.
[  10.398421] Freeing unused kernel memory: 324k freed
[  10.411573] input: AT Translated Set 2 keyboard as /class/input/input0
[  11.587801] Capability LSM initialized
[  11.615330] ACPI: CPU0 (power states: C1[C1] C2[C2])
[  11.615335] ACPI: Processor [CPU0] (supports 8 throttling states)
[  11.615343] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[    2.460000] ACPI: Thermal Zone [ATF0] (57 C)
[    2.468000] Time: acpi_pm clocksource has been installed.
[    2.732000] usbcore: registered new interface driver usbfs
[    2.732000] usbcore: registered new interface driver hub
[    2.732000] usbcore: registered new device driver usb
[    2.732000] USB Universal Host Controller Interface driver v3.0
[    2.732000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 17 (level, low) -> IRQ 18
[    2.732000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    2.732000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.732000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    2.732000] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00001800
[    2.732000] usb usb1: configuration #1 chosen from 1 choice
[    2.732000] hub 1-0:1.0: USB hub found
[    2.732000] hub 1-0:1.0: 2 ports detected
[    2.784000] SCSI subsystem initialized
[    2.792000] libata version 2.00 loaded.
[    2.836000] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 19
[    2.836000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    2.836000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.836000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    2.836000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[    2.836000] usb usb2: configuration #1 chosen from 1 choice
[    2.836000] hub 2-0:1.0: USB hub found
[    2.836000] hub 2-0:1.0: 2 ports detected
[    2.912000] ieee1394: Initialized config rom entry `ip1394'
[    2.928000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
[    2.928000] e100: Copyright(c) 1999-2006 Intel Corporation
[    2.940000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 17
[    2.940000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    2.940000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.940000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    2.940000] uhci_hcd 0000:00:1d.2: irq 17, io base 0x00001840
[    2.940000] usb usb3: configuration #1 chosen from 1 choice
[    2.940000] hub 3-0:1.0: USB hub found
[    2.940000] hub 3-0:1.0: 2 ports detected
[    3.068000] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 17 (level, low) -> IRQ 18
[    3.068000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[    3.068000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    3.068000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    3.068000] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00001860
[    3.068000] usb usb4: configuration #1 chosen from 1 choice
[    3.068000] hub 4-0:1.0: USB hub found
[    3.068000] hub 4-0:1.0: 2 ports detected
[    3.340000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 20
[    3.340000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    3.340000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.340000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    3.340000] ehci_hcd 0000:00:1d.7: debug port 1
[    3.340000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    3.340000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0x80004000
[    3.344000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.344000] usb usb5: configuration #1 chosen from 1 choice
[    3.344000] hub 5-0:1.0: USB hub found
[    3.344000] hub 5-0:1.0: 8 ports detected
[    3.580000] ata_piix 0000:00:1f.1: version 2.00ac7
[    3.580000] ACPI: PCI Interrupt 0000:00:1f.1 -> GSI 18 (level, low) -> IRQ 21
[    3.580000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[    3.580000] ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0x1880 irq 14
[    3.580000] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
[    3.580000] scsi0 : ata_piix
[    4.116000] ata1.00: ATAPI, max UDMA/33
[    5.788000] ata1.00: configured for UDMA/33
[    5.788000] scsi1 : ata_piix
[    5.788000] ata2: port disabled. ignoring.
[    5.788000] scsi 0:0:0:0: CD-ROM            MATSHITA UJ-832D          1.03 PQ: 0 ANSI: 5
[    5.788000] ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ]
[    5.788000] ata_piix 0000:00:1f.2: invalid MAP value 0
[    6.436000] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 18 (level, low) -> IRQ 21
[    6.436000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    6.436000] ata3: SATA max UDMA/133 cmd 0x18C0 ctl 0x18BA bmdma 0x18A0 irq 21
[    6.436000] ata4: SATA max UDMA/133 cmd 0x18B0 ctl 0x1896 bmdma 0x18A8 irq 21
[    6.436000] scsi2 : ata_piix
[    8.196000] ata3.00: ATA-7, max UDMA/100, 156301488 sectors: LBA48 NCQ (depth 0/32)
[    8.196000] ata3.00: ata3: dev 0 multi count 16
[    8.652000] ata3.00: configured for UDMA/100
[    8.652000] scsi3 : ata_piix
[    9.124000] ATA: abnormal status 0x7F on port 0x18B7
[    9.128000] scsi 2:0:0:0: Direct-Access    ATA      HTS541080G9SA00  MB4O PQ: 0 ANSI: 5
[    9.136000] ACPI: PCI Interrupt 0000:06:05.2[C] -> GSI 20 (level, low) -> IRQ 22
[    9.188000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[b0004000-b00047ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    9.188000] ACPI: PCI Interrupt 0000:06:08.0[A] -> GSI 20 (level, low) -> IRQ 22
[    9.216000] e100: eth0: e100_probe: addr 0xb0006000, irq 22, MAC addr 00:01:4A:9F:91:F7
[    9.236000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    9.236000] Uniform CD-ROM driver Revision: 3.20
[    9.236000] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    9.240000] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    9.240000] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[    9.244000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[    9.244000] sda: Write Protect is off
[    9.244000] sda: Mode Sense: 00 3a 00 00
[    9.244000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    9.244000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[    9.244000] sda: Write Protect is off
[    9.244000] sda: Mode Sense: 00 3a 00 00
[    9.244000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    9.244000]  sda: sda1 sda2 sda3 sda4
[    9.356000]  sda4:
[    9.356000] sd 2:0:0:0: Attached scsi disk sda
[  10.404000] Attempting manual resume
[  10.404000] swsusp: Resume From Partition 8:6
[  10.404000] PM: Checking swsusp image.
[  10.404000] PM: Resume from disk failed.
[  10.436000] kjournald starting.  Commit interval 5 seconds
[  10.436000] EXT3-fs: mounted filesystem with ordered data mode.
[  10.812000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0800460300efdb3f]
[  29.224000] e100: eth0: e100_watchdog: link up, 100Mbps, half-duplex
[  30.032000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[  30.036000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  30.044000] Linux agpgart interface v0.101 (c) Dave Jones
[  30.048000] agpgart: Detected an Intel 915GM Chipset.
[  30.068000] agpgart: AGP aperture is 256M @ 0x0
[  30.296000] intel_rng: FWH not detected
[  30.776000] Yenta: CardBus bridge found at 0000:06:05.0 [104d:818f]
[  30.776000] Yenta: Using CSCINT to route CSC interrupts to PCI
[  30.776000] Yenta: Routing CardBus interrupts to PCI
[  30.776000] Yenta TI: socket 0000:06:05.0, mfunc 0x01001b22, devctl 0x64
[  31.008000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 17
[  31.008000] Socket status: 30000006
[  31.008000] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[  31.008000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[  31.008000] cs: IO port probe 0x2000-0x2fff: clean.
[  31.008000] pcmcia: parent PCI bridge Memory window: 0xb0000000 - 0xb00fffff
[  31.008000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
[  31.200000] iTCO_vendor_support: vendor-support=0
[  31.212000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[  31.212000] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[  31.212000] iTCO_wdt: No card detected
[  31.228000] ACPI: PCI Interrupt 0000:06:05.3 -> GSI 23 (level, low) -> IRQ 20
[  31.260000] tifm_7xx1: sd card detected in socket 0
[  31.376000] NET: Registered protocol family 17
[  31.384000] ieee80211_crypt: registered algorithm 'NULL'
[  31.388000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[  31.388000] ieee80211: Copyright (C) 2004-2005 Intel Corporation
[  31.404000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq
[  31.404000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[  31.404000] ACPI: PCI Interrupt 0000:06:0b.0[A] -> GSI 22 (level, low) -> IRQ 23
[  31.404000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[  31.612000] ipw2200: Radio Frequency Kill Switch is On:
[  31.612000] Kill switch must be turned off for wireless networking to work.
[  31.612000] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)
[  31.628000] input: PS/2 Mouse as /class/input/input1
[  31.644000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input2
[  31.676000] cs: IO port probe 0x100-0x3af: clean.
[  31.676000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[  31.676000] cs: IO port probe 0x820-0x8ff: clean.
[  31.676000] cs: IO port probe 0xc00-0xcf7: clean.
[  31.680000] cs: IO port probe 0xa00-0xaff: clean.
[  32.032000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 19
[  32.032000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[  34.420000] hda_intel: azx_get_response timeout, switching to polling mode...
[  35.580000] hda_intel: azx_get_response timeout, switching to single_cmd mode...
[  38.016000] fuse init (API version 7.
[  38.056000] lp: driver loaded but no devices found
[  38.096000] Adding 2048248k swap on /dev/disk/by-uuid/4b68942c-de45-4072-a7ee-d69c73a692de.  Priority:-1 extents:1 across:2048248k
[  39.400000] EXT3 FS on sda8, internal journal
[  41.268000] NET: Registered protocol family 10
[  41.268000] lo: Disabled Privacy Extensions
[  41.268000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[  43.696000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[  44.160000] NTFS volume version 3.1.
[  44.212000] NTFS volume version 3.1.
[  45.052000] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[  45.052000] SGI XFS Quota Management subsystem
[  46.176000] kjournald starting.  Commit interval 5 seconds
[  46.176000] EXT3 FS on sda7, internal journal
[  46.176000] EXT3-fs: mounted filesystem with ordered data mode.
[  54.164000] eth0: no IPv6 routers present
[  63.656000] No dock devices found.
[  63.668000] ACPI: AC Adapter [ACAD] (on-line)
[  63.712000] ibm_acpi: ec object not found
[  67.292000] input: Lid Switch as /class/input/input3
[  67.292000] ACPI: Lid Switch [LID0]
[  67.292000] input: Power Button (CM) as /class/input/input4
[  67.292000] ACPI: Power Button (CM) [PWRB]
[  67.376000] Using specific hotkey driver
[  67.508000] ACPI: Battery Slot [BAT1] (battery present)
[  67.588000] ACPI: Video Device [NGFX] (multi-head: yes  rom: no  post: no)
[  67.588000] ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
[  79.260000] ppdev: user-space parallel port driver
[  83.508000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[  83.508000] apm: overridden by ACPI.
[  93.844000] sonypi: Sony Programmable I/O Controller Driver v1.26.
[  93.860000] sonypi: detected type3 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on
[  93.860000] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084
[  93.860000] sonypi: device allocated minor is 63
[  93.908000] input: Sony Vaio Jogdial as /class/input/input5
[  93.928000] input: Sony Vaio Keys as /class/input/input6
[  94.252000] Bluetooth: Core ver 2.11
[  94.252000] NET: Registered protocol family 31
[  94.252000] Bluetooth: HCI device and connection manager initialized
[  94.252000] Bluetooth: HCI socket layer initialized
[  94.280000] Bluetooth: L2CAP ver 2.8
[  94.280000] Bluetooth: L2CAP socket layer initialized
[  94.932000] Bluetooth: RFCOMM socket layer initialized
[  94.932000] Bluetooth: RFCOMM TTY layer initialized
[  94.932000] Bluetooth: RFCOMM ver 1.8
[  110.648000] eth0: no IPv6 routers present

[DktrKranz]

Per velocizzare il tutto potresti prendere in considerazione di disattivare qualche daemon per mezzo del tool Boot-Up Manager.

[effemme8]

Per velocizzare il tutto potresti prendere in considerazione di disattivare qualche daemon per mezzo del tool Boot-Up Manager.

ottima idea
....e puoi farmi anche un esempio ?

[DktrKranz]

PUoi farti un'idea dando un'occhiata a questa pagina: http://wiki.ubuntu-it.org/VelocizzareBoot.