Pagina 1 di 1

[Ati] Compiz + ati x1950 + drivers 8.42 [RISOLTO]

Inviato: mercoledì 31 ottobre 2007, 14:22
da Gilean
Salve a tutti, ho installato i nuovi drivers ma con la mia s.v. ati radeon x 1950 xtx non riesco a far andare compiz. Vi posto il mio

Xorg.conf

Codice: Seleziona tutto

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"	"/dev/input/mice"
	Option		"Protocol"	"ImPS/2"
	Option		"ZAxisMapping"	"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"stylus"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"eraser"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"cursor"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"Scheda video generica"
	Driver		"fglrx"
	Busid		"PCI:7:0:0"
EndSection

Section "Monitor"
	Identifier	"Philips 170S"
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Scheda video generica"
	Monitor		"Philips 170S"
	Defaultdepth	24
	SubSection "Display"
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
  screen "Default Screen"
	Inputdevice	"Generic Keyboard"
	Inputdevice	"Configured Mouse"
	
	# Uncomment if you have a wacom tablet
	#	InputDevice     "stylus"	"SendCoreEvents"
	#	InputDevice     "cursor"	"SendCoreEvents"
	#	InputDevice     "eraser"	"SendCoreEvents"
EndSection
Section "Module"
	Load		"i2c"
	Load		"bitmap"
	Load		"ddc"
	Load		"dri"
	Load		"extmod"
	Load		"freetype"
	Load		"int10"
	Load		"vbe"
	Load		"glx"
EndSection

Section "Extensions"
	Option		"Composite"	"1"
EndSection
il risultato di fglrxinfo

Codice: Seleziona tutto

display: :0.0  screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: Radeon X1950 Series
OpenGL version string: 2.0.6473 (8.37.6)

e del comando compiz

Codice: Seleziona tutto

/usr/bin/compiz: 55: intel: not found
Checking for Xgl: not present. 
No whitelisted driver found
SKIP_CHECKS is yes, so continuing despite problems.
Checking for texture_from_pixmap: not present. 
Trying again with indirect rendering:
Checking for texture_from_pixmap: not present. 
SKIP_CHECKS is yes, so continuing despite problems.
Checking for nVidia: not present. 
Checking for FBConfig: present. 
Checking for Xgl: not present. 
Starting emerald
/usr/bin/compiz.real (core) - Fatal: GLX_EXT_texture_from_pixmap is missing
/usr/bin/compiz.real (core) - Error: Failed to manage screen: 0
/usr/bin/compiz.real (core) - Fatal: No manageable screens found on display :0.0
quando provo ad abilitare compiz mi dice could not enable desktop effects....per favore aiutatemi.

Re: [Ati] [Ati] Compiz + ati x1950 + drivers 8.42

Inviato: mercoledì 31 ottobre 2007, 14:52
da karas
allora:

1- sudo gedit /usr/bin/compiz ed inserisci i driver fglrx nella whitelist di compiz:

# Driver whitelist
WHITELIST=”nvidia intel ati radeon i810 fglrx

ciaoz

Re: [Ati] [Ati] Compiz + ati x1950 + drivers 8.42

Inviato: mercoledì 31 ottobre 2007, 15:13
da Gilean
fatto, ora mi da the composite extension is not avaiable. inoltre ho notato che nell'fglrxinfo mi da la riga

OpenGL version string: 2.0.6473 (8.37.6) mentre honotato che molti hanno la 2.069...e' possibile che questo influisca?

Re: [Ati] [Ati] Compiz + ati x1950 + drivers 8.42

Inviato: mercoledì 31 ottobre 2007, 20:28
da arcibaldo
Gilean ha scritto: fatto, ora mi da the composite extension is not avaiable. inoltre ho notato che nell'fglrxinfo mi da la riga

OpenGL version string: 2.0.6473 (8.37.6) mentre honotato che molti hanno la 2.069...e' possibile che questo influisca?
Eh si penso proprio di si .... non hai seguito le indicazioni delle guide !!!

Praticamente ti sono rimasti dei moduli fglrx dei driver ATI 8.37.6 nel sistema e l'installazione dei nuovi 8.42.3 ha trovato dei riferimenti non corretti.

Devi ripetere l'installazione dei driver 8.42.3, ma prima devi verificare che non ci sia più nessun riferimento ai vecchi.

Quindi ti consiglio di tornare ai Vesa, quindi elimini i driver proprietari (aiutati con Adept e/o Synaptic per scovare altre dipendenze agli fglrx) e poi ti consiglio di verificare che nelle path di sistema /lib/modules e /usr/src non ci sia null'altro che i riferimenti al Kernel.

Se è tutto a posto, ora puoi installare di nuovo i driver ATI 8.42.3.

Saluti ...  ;)

Re: [Ati] [Ati] Compiz + ati x1950 + drivers 8.42

Inviato: mercoledì 31 ottobre 2007, 22:11
da Gilean
mio dio non saprei da dove iniziare...tutto quel che mihai detto e' arabo per me, puoi darmi un aiutino??

Re: [Ati] [Ati] Compiz + ati x1950 + drivers 8.42

Inviato: mercoledì 31 ottobre 2007, 22:21
da arcibaldo
Non ti allarmare ... queste cose sono molto semplici ... portano via solo del tempo e molta pazienza !!!

Oltre alla guida e/o wiki che hai seguito per installare i driver ATI 8.42.3, leggiti questa guida di Divilinux ... Disinstallare driver Ati e modulo Fglrx

e ... se vuoi questo mio post sul Forum Internazionale ... http://ubuntuforums.org/showthread.php?t=593610



Saluti ...  ;)

Re: [Ati] [Ati] Compiz + ati x1950 + drivers 8.42

Inviato: mercoledì 31 ottobre 2007, 23:08
da Gilean
ho preferito reinstallare linux da capo, ma seguendo la guida di divilinux sull'installazione, bene non mi estrae i pacchetti .deb mi dice un qualcosa sull'architecture not supported.

Re: [Ati] [Ati] Compiz + ati x1950 + drivers 8.42

Inviato: giovedì 1 novembre 2007, 4:49
da arcibaldo
Prima di installare i driver ATI ti sei accertato di avere i seguenti ?:

Codice: Seleziona tutto

sudo apt-get update
sudo apt-get install module-assistant build-essential fakeroot dh-make debhelper \
debconf libstdc++5 linux-headers-generic

Purtroppo molte guide danno per scontato molti passaggi, ma se vedi su questa Wiki "Metodo 2" Ubuntu Gutsy Installation Guide ne trai le dovute considerazioni.

Saluti ...  ;)

Re: [Ati] [Ati] Compiz + ati x1950 + drivers 8.42

Inviato: giovedì 1 novembre 2007, 12:05
da Gilean
il problema e' che mi chiede il cd ubuntu amd 64 ma io non ce l'ho...ed unaltra domanda...devo attivare i restricted manager drivers?

Re: [Ati] [Ati] Compiz + ati x1950 + drivers 8.42

Inviato: giovedì 1 novembre 2007, 17:11
da Gilean
up.

Re: [Ati] [Ati] Compiz + ati x1950 + drivers 8.42

Inviato: giovedì 1 novembre 2007, 18:20
da Gilean
un'altra domanda, non posso partire da una INSTALLAZIONE pulita di linux ed avviare il .run son il comando sudo sh /nomefile.run?

Re: [Ati] [Ati] Compiz + ati x1950 + drivers 8.42

Inviato: giovedì 1 novembre 2007, 20:54
da Gilean
signori non potete sapere la mia gioia ma CISONO RIUSCITO EVVAIIIIIII :D :D :D

per chi come me fosse un niubbone ed avesse problemi riferitevi a questa guida, spero possa servire

http://algatux.wordpress.com/2007/10/25 ... 423-aiglx/

e buon compiz a tutti  (good)

Re: [Ati] Compiz + ati x1950 + drivers 8.42 [RISOLTO]

Inviato: mercoledì 21 novembre 2007, 21:04
da sparazza
Grazie da parte di due disperati possessori di at x 1950!!
ti faremo sapere se funziona!!
Saluti
Daniele

Re: [Ati] Compiz + ati x1950 + drivers 8.42 [RISOLTO]

Inviato: mercoledì 21 novembre 2007, 22:01
da Marneus88
non funzionaaa.... potresti postarmi per intero il tuo xorg.conf? così che setto le caratteristiche della scheda video alla stessa maniera!

Saluti
Sparazza