Forum Ubuntu-it

Il forum della comunità italiana di Ubuntu.
https://forum.ubuntu-it.org/

[RISOLTO][Compiz] Pixel d'errore

https://forum.ubuntu-it.org/viewtopic.php?f=65&t=337285

Pagina 1 di 1

[RISOLTO][Compiz] Pixel d'errore

Inviato: domenica 15 novembre 2009, 0:12
da tistosuleoo
Salve, vi scrivo per sottoporvi questo mio problema che si verifica da dopo l'aggiornamento alla 9.10.
Sul mio schermo ci sono dei pixel, qua e la, che non dovrebbero esserci: per l'appunto quelli che io ho chiamato pixel d'errore.
Faccio qualche esempio: nel pannello ho l'iconcina della frequenza del microprocessore; i numeri che indicano la frequenza sono "sporcati" da alcuni pixel che invece di essere scuri (come lo sfondo) sono chiari e viceversa per altri pixel. Sempre a titolo di esempio, c'è una striscetta di pixel grigi attaccati alla parte inferiore del mio pannello. Pensando che fosse una finestra nascosta c'ho cliccato sopra (con estrema precisione essendo, come detto, una semplice e singola striscia di pixel), ma non succede nulla se non che tale stricia si modifica in lunghezza, si sdoppia o si raggruppa, a seconda dell'ordine e della posizione del click....bhò!?!
altri pixel compaiono sui contorni dei caratteri nel mezzo del desktop.
Se disabilito gli effetti (da "normal" passo a "none") allora questi pixel d'errore scompaiono......è per questo che mi è venuto in mente che possa dipendere da compiz.
Grazie per l'aiuto.
Saluti,g.

Re: [Compiz] Pixel d'errore

Inviato: martedì 17 novembre 2009, 12:22
da tistosuleoo
....ok, ho un po' approfondito la situazione e credo che il problema sia il refresh rate......ce l'ho fisso a 60HZ con una risoluzione di 1280*800.
Ho un laptop HP con una ATI della famiglia HD 3*** (34 e qualcosa.....non ho il portatile con me e non ricordo), ho provato ad installare i driver proprietari sia da "Hardware Drivers", sia scaricandoli dal sito AMD, ma niente.
Fino alla 9.04 questo problema non si era mai verificato.
Sbaglio ad impuitare tale malfunzionamento al refresh rate?
aiuto.
ciao e grazie.

Re: [Compiz] Pixel d'errore

Inviato: mercoledì 18 novembre 2009, 22:18
da tistosuleoo
davvero nessuno che gli venga un'idea......compiz o refresh rate? o cos'altro?
Il fatto è che il problema è pure difficile da cercare a parole semplici......sotto pixel d'errore non ho trovato nulla.
che cerco? pixel sporchi? oppure pixel rincogl......!?!? :-\
aiutooooooo

Re: [Compiz] Pixel d'errore

Inviato: venerdì 20 novembre 2009, 0:31
da Ipnorospo
perche secondo te il problema e legato refresh rate?
a vederlo cosi mi sembra un problema legato a compiz dato che se lo disattivi i pixel scompaiono...non e che riesci a fare uno screenshot?

Re: [Compiz] Pixel d'errore

Inviato: venerdì 20 novembre 2009, 8:05
da tistosuleoo
Ciao e grazie,
il dobbio sul refresh rate mi era venuto perchèce l'ho fisso a 60 hz e in giro sul forum internazionale ho visto che questo sembra essere un problema delle ATI.
Comunque si, è vero, se disabilito compiz niente più pixel zozzi.
stasera tornato a casa, provo a postare un po' di screenshot.
Ciao e grazie di nuovo.

Re: [Compiz] Pixel d'errore

Inviato: venerdì 20 novembre 2009, 23:14
da tistosuleoo
ecco a te un dettaglio ingrandito di uno screenshoot:

Immagine

le frecce rosse indicano le zone in cui i pixel "sfarfallano".
Ti assicuro che, qua e la, il mio monitor ne è pieno.
Ripeto, con compiz disabilitato (esclusione effetti grafici da System>Preferences>Apparence) risulta andare tutto bene.
ciao e grazie.

Re: [Compiz] Pixel d'errore

Inviato: sabato 21 novembre 2009, 7:25
da Ipnorospo
credo di "vedere" il problema...
cmq non ho mai sentito nulla di simile prima...come detto non credo che sia un problema legato di refresh perche il valore di 60 a quella risoluzione mi sembra normale per un portatile(anche io ho un portatile ed ho il refresh fisso a 60).Riesci a ripescare le discussioni sul forum internazionale di cui hai accennato?
Pensando che fosse una finestra nascosta c'ho cliccato sopra (con estrema precisione essendo, come detto, una semplice e singola striscia di pixel), ma non succede nulla se non che tale stricia si modifica in lunghezza, si sdoppia o si raggruppa, a seconda dell'ordine e della posizione del click....bhò!?!
Cioe se tu clicchi su questi pixel si spostano/muovono?

Re: [Compiz] Pixel d'errore

Inviato: sabato 21 novembre 2009, 10:25
da tistosuleoo
no, quei pixel che ti ho fatto vedere no.
La striscia di pixel che si muove, si spezza e si ricompone (lo so, sembra il desktop di un indemoniato!) è quella sotto il panel superiore.......e mi compare sempre in alto a destra (come nell'immagine di seguito), ed in basso a sinistra.

Immagine

come puoi vedere è una striscia di pixel dello stesso colore del panel che, ad essere precisi, "rompe" l'ombregiatura del panel sul desktop caratteritica degli effetti grafici anche di quelli normali (il mio caso). Anche in questo caso, il problema scompare disabilitando tali effetti.

Per il discorso del refresh rate è probabile che sia stata una mia pippa mentale, mi pareva solo strano che fosse fisso a 60 mhz, mi pareva che prima ce l'avessi + alto.
Comunque grazie x l'aiuto, ti ripeto, è anche difficile stabilire, per questo problema, una stringa di ricerca adeguata da inserire nei forum.
ciao

Re: [Compiz] Pixel d'errore

Inviato: sabato 21 novembre 2009, 10:37
da tistosuleoo
...con incredibile audacia che poco s'addice al sottoscritto malato di niubbagine cronica mi sono slanciato in un:

Codice: Seleziona tutto

dmesg | grep ERROR
ed ho trovato:

Codice: Seleziona tutto

[   32.655121] [fglrx:fireglAsyncioIntEnableMsgHandler] *ERROR* interrupt source ff000066 is not supported on this hardware (return code = 1)
[   33.606144] [fglrx:fireglAsyncioIntEnableMsgHandler] *ERROR* interrupt source ff000066 is not supported on this hardware (return code = 1)
[  687.938068] [fglrx:fireglAsyncioIntEnableMsgHandler] *ERROR* interrupt source ff000066 is not supported on this hardware (return code = 1)
può esserti/vi d'aiuto?

Re: [Compiz] Pixel d'errore

Inviato: domenica 22 novembre 2009, 0:29
da Ipnorospo
con google ho trovato questo:https://bugs.launchpad.net/fglrx/+bug/288620
a questo punto posta anche il contenuto del file Xorg.0.log(lo trovi dentro la cartella /var/log),magari si trova qualcosa di utile

Re: [Compiz] Pixel d'errore

Inviato: domenica 22 novembre 2009, 23:25
da tistosuleoo
questo è il contenuto del mio Xorg.o.log file:

Codice: Seleziona tutto

X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-25-xen i686 Ubuntu
Current Operating System: Linux gianluca-laptop 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 i686
Kernel command line: root=UUID=447ee337-8677-44f2-bb80-a77caa42738e ro 
Build Date: 27 October 2009  01:23:58AM
xorg-server 2:1.6.4-2ubuntu5~ppa1 (buildd@) 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 22 23:02:50 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "aticonfig Layout"
(**) |-->Screen "aticonfig-Screen[0]-0" (0)
(**) |   |-->Monitor "aticonfig-Monitor[0]-0"
(**) |   |-->Device "aticonfig-Device[0]-0"
(**) Option "Xinerama" "off"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0:1:0:0) 1002:95c2:103c:30e9 ATI Technologies Inc rev 0, Mem @ 0x80000000/268435456, 0x98400000/65536, I/O @ 0x00007000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
	compiled for 7.4.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 7.4.0, module version = 1.0.0
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
	compiled for 1.4.99.906, module version = 8.66.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
	compiled for 1.4.99.906, module version = 8.66.2
	Module class: X.Org Video Driver
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) ATI Proprietary Linux Driver Version Identifier:8.66.2
(II) ATI Proprietary Linux Driver Release Identifier: 8.661                                
(II) ATI Proprietary Linux Driver Build Date: Sep 23 2009 17:30:14
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Chipset Supported AMD Graphics Processor (0x95C2) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) fglrx(0): pEnt->device->identifier=0x9f2b420
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 0.1.0
	ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(II) fglrx(0): 10BitPixelFormat disabled by default
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x06419064
(**) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Loading extension XFree86-DRI
drmDynamicMajor: found major device number 251
drmDynamicMajor: found major device number 251
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/ati/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(--) fglrx(0): Chipset: "ATI Mobility Radeon HD 3430" (Chipset = 0x95c2)
(--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x30e9)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0x80000000
(--) fglrx(0): MMIO registers at 0x98400000
(--) fglrx(0): I/O port at 0x00007000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): Battery is used
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.1.0
	ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 10.88
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
(II) fglrx(0): VESA VBE OEM Product: M82
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 262144 kByte, Type: DDR2
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Using adapter: 1:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
(II) fglrx(0): Interrupt handler installed at IRQ 33.
(II) fglrx(0): IRQ 33 Enabled.
(**) fglrx(0): Center Mode is disabled 
(II) fglrx(0): Finished Initialize PPLIB!
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000002, disabled=0x00000000
(II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: LPL  Model: 3101  Serial#: 0
(II) fglrx(0): Year: 2008  Week: 0
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 33  vert.: 21
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.594 redY: 0.349   greenX: 0.325 greenY: 0.543
(II) fglrx(0): blueX: 0.157 blueY: 0.139   whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 69.3 MHz   Image Size:  331 x 207 mm
(II) fglrx(0): h_active: 1280  h_sync: 1328  h_sync_end 1352 h_blank_end 1416 h_border: 0
(II) fglrx(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 816 v_border: 0
(II) fglrx(0):  LGPhilipsLCD
(II) fglrx(0): Monitor name: LP154WX4-TLCB
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 	00ffffffffffff00320c013100000000
(II) fglrx(0): 	00120103802115780a14659859538b28
(II) fglrx(0): 	23505400000001010101010101010101
(II) fglrx(0): 	010101010101121b0088502010303018
(II) fglrx(0): 	36004bcf100000190000000000000000
(II) fglrx(0): 	00000000000000000000000000fe004c
(II) fglrx(0): 	475068696c6970734c43440a000000fc
(II) fglrx(0): 	004c503135345758342d544c4342002d
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Primary Controller - LCD on internal LVDS
(II) fglrx(0): Internal Desktop Setting: 0x00000008
(==) fglrx(0): QBS disabled
(==) fglrx(0):  PseudoColor visuals disabled
(**) fglrx(0): Center Mode is disabled 
(==) fglrx(0): TMDS coherent mode is enabled 
(II) fglrx(0): Total of 11 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x800 (pitch 0)
(**) fglrx(0): *Mode "1280x800": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x800"x60.0   69.30  1280 1328 1352 1416  800 803 809 816 +hsync +vsync (48.9 kHz)
(**) fglrx(0): *Mode "1280x768": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0   69.30  1280 1328 1352 1416  768 803 809 816 +hsync +vsync (48.9 kHz)
(**) fglrx(0): *Mode "1280x720": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0   69.30  1280 1328 1352 1416  720 803 809 816 +hsync +vsync (48.9 kHz)
(**) fglrx(0): *Mode "1024x768": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0   69.30  1024 1328 1352 1416  768 803 809 816 +hsync +vsync (48.9 kHz)
(**) fglrx(0): *Mode "800x600": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0   69.30  800 1328 1352 1416  600 803 809 816 +hsync +vsync (48.9 kHz)
(**) fglrx(0): *Mode "640x480": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0   69.30  640 1328 1352 1416  480 803 809 816 +hsync +vsync (48.9 kHz)
(**) fglrx(0):  Default mode "640x400": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0   69.30  640 1328 1352 1416  400 803 809 816 +hsync +vsync (48.9 kHz)
(**) fglrx(0):  Default mode "512x384": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0   69.30  512 1328 1352 1416  384 803 809 816 +hsync +vsync (48.9 kHz)
(**) fglrx(0):  Default mode "400x300": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "400x300"x60.0   69.30  400 1328 1352 1416  300 803 809 816 +hsync +vsync (48.9 kHz)
(**) fglrx(0):  Default mode "320x240": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x240"x60.0   69.30  320 1328 1352 1416  240 803 809 816 +hsync +vsync (48.9 kHz)
(**) fglrx(0):  Default mode "320x200": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x200"x60.0   69.30  320 1328 1352 1416  200 803 809 816 +hsync +vsync (48.9 kHz)
(--) fglrx(0): Display dimensions: (330, 210) mm
(--) fglrx(0): DPI set to (98, 96)
(--) fglrx(0): Virtual size is 1280x800 (pitch 1280)
(**) fglrx(0): *Mode "1280x800": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x800"x60.0   69.30  1280 1328 1352 1416  800 803 809 816 +hsync +vsync (48.9 kHz)
(**) fglrx(0): *Mode "1280x768": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0   69.30  1280 1328 1352 1416  768 803 809 816 +hsync +vsync (48.9 kHz)
(**) fglrx(0): *Mode "1280x720": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0   69.30  1280 1328 1352 1416  720 803 809 816 +hsync +vsync (48.9 kHz)
(**) fglrx(0): *Mode "1024x768": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0   69.30  1024 1328 1352 1416  768 803 809 816 +hsync +vsync (48.9 kHz)
(**) fglrx(0): *Mode "800x600": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0   69.30  800 1328 1352 1416  600 803 809 816 +hsync +vsync (48.9 kHz)
(**) fglrx(0): *Mode "640x480": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0   69.30  640 1328 1352 1416  480 803 809 816 +hsync +vsync (48.9 kHz)
(**) fglrx(0):  Default mode "640x400": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0   69.30  640 1328 1352 1416  400 803 809 816 +hsync +vsync (48.9 kHz)
(**) fglrx(0):  Default mode "512x384": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0   69.30  512 1328 1352 1416  384 803 809 816 +hsync +vsync (48.9 kHz)
(**) fglrx(0):  Default mode "400x300": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "400x300"x60.0   69.30  400 1328 1352 1416  300 803 809 816 +hsync +vsync (48.9 kHz)
(**) fglrx(0):  Default mode "320x240": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x240"x60.0   69.30  320 1328 1352 1416  240 803 809 816 +hsync +vsync (48.9 kHz)
(**) fglrx(0):  Default mode "320x200": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x200"x60.0   69.30  320 1328 1352 1416  200 803 809 816 +hsync +vsync (48.9 kHz)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.2.1
	ABI class: X.Org Video Driver, version 5.0
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906
(WW) fglrx(0): could not detect X server version (query_status=-1)
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): DRIScreenInit for fglrx driver
drmDynamicMajor: found major device number 251
drmDynamicMajor: found major device number 251
drmDynamicMajor: found major device number 251
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/ati/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [drm] mapped SAREA 0x2000 to 0xb76eb000
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.66.2
(II) fglrx(0):     Date: Sep 23 2009
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.31-14-generic
(II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
(II) fglrx(0):     Build-Kernel __SMP__:            yes
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0x00004000
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01004000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,3280)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,800) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 2480
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
	compiled for 1.4.99.906, module version = 1.0.0
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 90
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	Solid Horizontal and Vertical Lines
	Driver provided ScreenToScreenBitBlt replacement
	Driver provided FillSolidRects replacement
(II) fglrx(0): GLESX is enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules//amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
	compiled for 1.4.99.906, module version = 1.0.0
(II) Loading extension AMDXVOPL
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): Enable composite support successfully
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
drmDynamicMajor: found major device number 251
drmDynamicMajor: found major device number 251
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/ati/card0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: drmOpenMinor returns 13
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(WW) AIGLX: 3D driver claims to not support visual 0x3f
(WW) AIGLX: 3D driver claims to not support visual 0x40
(WW) AIGLX: 3D driver claims to not support visual 0x41
(WW) AIGLX: 3D driver claims to not support visual 0x42
(WW) AIGLX: 3D driver claims to not support visual 0x47
(WW) AIGLX: 3D driver claims to not support visual 0x48
(WW) AIGLX: 3D driver claims to not support visual 0x49
(WW) AIGLX: 3D driver claims to not support visual 0x4a
(WW) AIGLX: 3D driver claims to not support visual 0x67
(WW) AIGLX: 3D driver claims to not support visual 0x68
(WW) AIGLX: 3D driver claims to not support visual 0x69
(WW) AIGLX: 3D driver claims to not support visual 0x6a
(WW) AIGLX: 3D driver claims to not support visual 0x6f
(WW) AIGLX: 3D driver claims to not support visual 0x70
(WW) AIGLX: 3D driver claims to not support visual 0x71
(WW) AIGLX: 3D driver claims to not support visual 0x72
(II) AIGLX: Loaded and initialized /usr/X11R6/lib/modules/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) fglrx(0): Enable the clock gating!
(II) fglrx(0): Restoring recent mode: 1280x800@60Hz
(II) config/hal: Adding input device Video Bus
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 2.2.5
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event1"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(II) config/hal: Adding input device CKF7063
(**) CKF7063: always reports core events
(**) CKF7063: Device: "/dev/input/event7"
(II) CKF7063: Found keys
(II) CKF7063: Configuring as keyboard
(II) XINPUT: Adding extended input device "CKF7063" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event3"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.1.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.2
(**) Option "Device" "/dev/input/event8"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
nel frattempo sto cercando di capire un po' la situazione di questo bug su launchpad,,,anche se non ci sto capendo molto!

Ciao e grazie!

Re: [Compiz] Pixel d'errore

Inviato: martedì 24 novembre 2009, 9:18
da tistosuleoo
Ho dato un'occhiata al bug, ma......... :o
non ciò capito una mazza.......o meglio: non capisco quale sia lo status (triaged o fix released) e tantomeno se ci siano delle azioni da intraprendere!
aiuto.
Anche solo in merito alla chiave di lettura su launchpad.
grazie!

Re: [Compiz] Pixel d'errore

Inviato: giovedì 26 novembre 2009, 23:18
da tistosuleoo
Dunque,
ho risolto!
Come?
Ho reinstallato tuttttttoooooooooooo!
Ed vi giuro, ho provato quasi la stessa sensazione che ho provato nel passare da Windows a Ubuntu!
In breve:

- il problema dei pixel "zozzi", motivo del mio post, è scomparso. Ora viene visualizzato tutto correttamente,

- tutti quei bugs fix ai quali ero dovuto ricorrere un anno fa (credo con la hardy) per far funzionare il mio portatile (tipo le casse, la regolazione della luminosità ecc.....) sono stati effettivamente "fixati"....Ora funziona tutto appena terminata l'installazione. Direte ovvio....per me non lo era!

- il tempo di accensione (e lo misuro da quando premo il dito sul tasto di accensione fino a quando posso muovere la freccetta del mouse) è passato da 1 minuto e 45 secondi dell'upgrade a Karmic a 44 secondi della reinstallazione completa di Karmic. (e questo sarebbe stato, ben presto, motivo di un altro post......anche se in giro per il forum mi pare di aver incontrato qualcun altro che abbia combattuto con il boot lento dopo l'aggiornamento a karmic)

- tutte le operazioni sono davvero più veloci.

Insomma: reinstallate, reinstallate, reinstallate!

Una nota negativa: una volta (mentrre scrivo queste righe ad esempio l'ho cercato di nuovo, ma niente) mi è ricomparso l'errore relativo a fglrx, ma , a questo punto, non riesco a capire quale sia l'effetto!....
Quindi, credo di poter mettere risolto.
Tutti gli orari sono UTC+02:00 Europa/Roma
Pagina 1 di 1

Basato su phpBB® Forum Software © phpBB Limited • PostgreSQL© • Megmoticons©