Compiz su AiGLX per GNOME/KDE/XfCE (aggiorntato al 22/08/2007)
- origin of
- Entusiasta Emergente
- Messaggi: 1028
- Iscrizione: venerdì 30 giugno 2006, 17:04
- Località: Lucca
Re: [Guida] AiGLX con Compiz per GNOME/KDE/XfCE su Edgy Eft
ho una 8x...
proverò, grazie...
proverò, grazie...
Utente archlinux, ex utente ubuntu.
Contatto jabber: originof@jaim.at
MIO SITO: http://www.happycode.it
Contatto jabber: originof@jaim.at
MIO SITO: http://www.happycode.it
Re: [Guida] AiGLX con Compiz per GNOME/KDE/XfCE su Edgy Eft
Ho provato l'installazione su una scheda grafica i915 integrata. Non ho cambiato una sola riga di xorg.conf. E funziona benissimo, molto meglio di del vecchio sistema xgl e compiz.
Il tutto non consuma praticamente nulla. Processore e programmi, nei tempi morti del pc, sono a zero.
Complimenti, Janvitus.
Il tutto non consuma praticamente nulla. Processore e programmi, nei tempi morti del pc, sono a zero.
Complimenti, Janvitus.
- origin of
- Entusiasta Emergente
- Messaggi: 1028
- Iscrizione: venerdì 30 giugno 2006, 17:04
- Località: Lucca
Re: [Guida] AiGLX con Compiz per GNOME/KDE/XfCE su Edgy Eft
ati merda, fatemelo dire, ATI MERDA.....
Utente archlinux, ex utente ubuntu.
Contatto jabber: originof@jaim.at
MIO SITO: http://www.happycode.it
Contatto jabber: originof@jaim.at
MIO SITO: http://www.happycode.it
Re: [Guida] AiGLX con Compiz per GNOME/KDE/XfCE su Edgy Eft
Se hai dovuto solo installare i pacchetti senza modificare nulla più che complimenti janvitus bisognerebbe fare i complimenti a edgy!fandango ha scritto: Ho provato l'installazione su una scheda grafica i915 integrata. Non ho cambiato una sola riga di xorg.conf. E funziona benissimo, molto meglio di del vecchio sistema xgl e compiz.
Il tutto non consuma praticamente nulla. Processore e programmi, nei tempi morti del pc, sono a zero.
Complimenti, Janvitus.
Ti funziona l'accelerazione con i driver open?origin of ha scritto: ati m****, fatemelo dire, ATI m****.....
- origin of
- Entusiasta Emergente
- Messaggi: 1028
- Iscrizione: venerdì 30 giugno 2006, 17:04
- Località: Lucca
Re: [Guida] AiGLX con Compiz per GNOME/KDE/XfCE su Edgy Eft
luzzo ha scritto:Se hai dovuto solo installare i pacchetti senza modificare nulla più che complimenti janvitus bisognerebbe fare i complimenti a edgy!fandango ha scritto: Ho provato l'installazione su una scheda grafica i915 integrata. Non ho cambiato una sola riga di xorg.conf. E funziona benissimo, molto meglio di del vecchio sistema xgl e compiz.
Il tutto non consuma praticamente nulla. Processore e programmi, nei tempi morti del pc, sono a zero.
Complimenti, Janvitus.
Ti funziona l'accelerazione con i driver open?origin of ha scritto: ati m****, fatemelo dire, ATI m****.....
si si...
questo è il mio xorg
Codice: Seleziona tutto
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
Option "XkbVariant" "it"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "NEC V520"
HorizSync 31.0 - 70.0
VertRefresh 55.0 - 120.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. RV350 AR [Radeon 9600 XT]"
Driver "ati"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV350 AR [Radeon 9600 XT]"
Monitor "NEC V520"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "0"
EndSection
io ho provato in tutte le maniere....
Utente archlinux, ex utente ubuntu.
Contatto jabber: originof@jaim.at
MIO SITO: http://www.happycode.it
Contatto jabber: originof@jaim.at
MIO SITO: http://www.happycode.it
- Janvitus
- Amministratore
- Messaggi: 18778
- Iscrizione: lunedì 25 aprile 2005, 15:52
- Desktop: GNOME Shell / Xfce
- Sesso: Maschile
- Località: Potenza
- Contatti:
Re: [Guida] AiGLX con Compiz per GNOME/KDE/XfCE su Edgy Eft
Appunto, io ho solo preso qui e la le opzioni da mettere in xorg, e magari ho tolto quelle inutililuzzo ha scritto:Se hai dovuto solo installare i pacchetti senza modificare nulla più che complimenti janvitus bisognerebbe fare i complimenti a edgy!fandango ha scritto: Complimenti, Janvitus.
Praticamente mancano tutte le opzioni che ho indicato nel primo post :/ muovi le ditine e scriviceleorigin of ha scritto: ditemi come modificarlo che vado fori di testa....
io ho provato in tutte le maniere....
Ultima cosa, lasciate perdere gset-compiz, non serve ad una emerita mazza.
- origin of
- Entusiasta Emergente
- Messaggi: 1028
- Iscrizione: venerdì 30 giugno 2006, 17:04
- Località: Lucca
Re: [Guida] AiGLX con Compiz per GNOME/KDE/XfCE su Edgy Eft
no, nn hai capito...ho gia provato in tutte le maniere......e nn va...forse sbaglio qualcosa...Janvitus ha scritto:Appunto, io ho solo preso qui e la le opzioni da mettere in xorg, e magari ho tolto quelle inutililuzzo ha scritto:Se hai dovuto solo installare i pacchetti senza modificare nulla più che complimenti janvitus bisognerebbe fare i complimenti a edgy!fandango ha scritto: Complimenti, Janvitus.
Praticamente mancano tutte le opzioni che ho indicato nel primo post :/ muovi le ditine e scriviceleorigin of ha scritto: ditemi come modificarlo che vado fori di testa....
io ho provato in tutte le maniere....
Ultima cosa, lasciate perdere gset-compiz, non serve ad una emerita mazza.
se mi dite come modificarlo....magari ci riesco...
Utente archlinux, ex utente ubuntu.
Contatto jabber: originof@jaim.at
MIO SITO: http://www.happycode.it
Contatto jabber: originof@jaim.at
MIO SITO: http://www.happycode.it
Re: [Guida] AiGLX con Compiz per GNOME/KDE/XfCE su Edgy Eft
Solo che faceva ridere il dire "non ho dovuto modificare niente e complimenti a janvitus"! Se non hai modificato niente allora complimenti a edgy!Janvitus ha scritto: Appunto, io ho solo preso qui e la le opzioni da mettere in xorg, e magari ho tolto quelle inutili
A janvitus i complimenti per le modifiche da fare a chi servono e per 1000 altri motivi!!
Se va l'accelerazione, hai i driver open, hai seguito la guida di janvitus con tutte le modifiche da aggiungere, e nella device hai messo le opzioni per ati e non va io non saprei proprio. Mi spiaceorigin of ha scritto: no, nn hai capito...ho gia provato in tutte le maniere......e nn va...forse sbaglio qualcosa...
se mi dite come modificarlo....magari ci riesco...
Ti posto il mio xorg... magari ti può servire:
Codice: Seleziona tutto
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
Option "XkbVariant" "nodeadkeys"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. Radeon R250 Lf [Radeon Mobility 9000 M9]"
Driver "radeon"
BusID "PCI:1:0:0"
Option "DRI" "true"
Option "ColorTiling" "on"
Option "EnablePageFlip" "true"
Option "AccelMethod" "EXA"
Option "XAANoOffscreenPixmaps"
Option "RenderAccel" "true"
# Option "AGPMode" "2"
Option "AGPFastWrite" "on"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. Radeon R250 Lf [Radeon Mobility 9000 M9]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1400x1050"
EndSubSection
SubSection "Display"
Depth 4
Modes "1400x1050"
EndSubSection
SubSection "Display"
Depth 8
Modes "1400x1050"
EndSubSection
SubSection "Display"
Depth 15
Modes "1400x1050"
EndSubSection
SubSection "Display"
Depth 16
Modes "1400x1050"
EndSubSection
SubSection "Display"
Depth 24
Modes "1400x1050"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Option "AIGLX" "true"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Ultima modifica di luzzo il domenica 15 ottobre 2006, 13:38, modificato 1 volta in totale.
Re: [Guida] AiGLX con Compiz per GNOME/KDE/XfCE su Edgy Eft
Guardato un po' meglio. Tu hai due sezioni device: Una ati e l'altra fglrx. Prova a fare così (ovviamente fai un backup del tuo xorg.conf):
cancella la seconda sezione device completamente e alla prima metti le opzioni che ho postato io + quella per agp se ce l'hai (comunque prova senza prima)
poi fai le altre aggiunte elencate da jan. Così secondo me dovrebbe andare...
cancella la seconda sezione device completamente e alla prima metti le opzioni che ho postato io + quella per agp se ce l'hai (comunque prova senza prima)
poi fai le altre aggiunte elencate da jan. Così secondo me dovrebbe andare...
- origin of
- Entusiasta Emergente
- Messaggi: 1028
- Iscrizione: venerdì 30 giugno 2006, 17:04
- Località: Lucca
Re: [Guida] AiGLX con Compiz per GNOME/KDE/XfCE su Edgy Eft
gia provato...nn funge....n parte proprio la sessione.....luzzo ha scritto: Guardato un po' meglio. Tu hai due sezioni device: Una ati e l'altra fglrx. Prova a fare così (ovviamente fai un backup del tuo xorg.conf):
cancella la seconda sezione device completamente e alla prima metti le opzioni che ho postato io + quella per agp se ce l'hai (comunque prova senza prima)
poi fai le altre aggiunte elencate da jan. Così secondo me dovrebbe andare...
Utente archlinux, ex utente ubuntu.
Contatto jabber: originof@jaim.at
MIO SITO: http://www.happycode.it
Contatto jabber: originof@jaim.at
MIO SITO: http://www.happycode.it
- origin of
- Entusiasta Emergente
- Messaggi: 1028
- Iscrizione: venerdì 30 giugno 2006, 17:04
- Località: Lucca
Re: [Guida] AiGLX con Compiz per GNOME/KDE/XfCE su Edgy Eft
ok, adesso va tutto, compiz vanilla e aiglx, grazie per l'aiuto, andava configurato per bene l'xorg.conf... (b2b)
Utente archlinux, ex utente ubuntu.
Contatto jabber: originof@jaim.at
MIO SITO: http://www.happycode.it
Contatto jabber: originof@jaim.at
MIO SITO: http://www.happycode.it
Re: [Guida] AiGLX con Compiz per GNOME/KDE/XfCE su Edgy Eft
Che ne diresti di postarlo, l'xorg.conf? Grazie.
- origin of
- Entusiasta Emergente
- Messaggi: 1028
- Iscrizione: venerdì 30 giugno 2006, 17:04
- Località: Lucca
Re: [Guida] AiGLX con Compiz per GNOME/KDE/XfCE su Edgy Eft
Codice: Seleziona tutto
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
Option "XkbVariant" "it"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. RV350 AR [Radeon 9600 XT]"
Driver "radeon"
BusID "PCI:1:0:0"
Option "DRI" "true"
Option "ColorTiling" "on"
Option "EnablePageFlip" "true"
Option "AccelMethod" "EXA"
Option "XAANoOffscreenPixmaps"
Option "RenderAccel" "true"
EndSection
Section "Monitor"
Identifier "NEC V520"
Option "DPMS"
HorizSync 31-70
VertRefresh 55-120
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV350 AR [Radeon 9600 XT]"
Monitor "NEC V520"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Option "AIGLX" "true"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Utente archlinux, ex utente ubuntu.
Contatto jabber: originof@jaim.at
MIO SITO: http://www.happycode.it
Contatto jabber: originof@jaim.at
MIO SITO: http://www.happycode.it
- micettonero
- Scoppiettante Seguace
- Messaggi: 772
- Iscrizione: domenica 5 febbraio 2006, 11:49
- Contatti:
Re: [Guida] AiGLX con Compiz per GNOME/KDE/XfCE su Edgy Eft
Anche a me sulla mia ATI Radeon 9550 AIGLX va alla grande!
Linux Registered User #409415
"Nessuno può fabbricare una macchina tanto intelligente che possa essere
usata da uno sciocco" - Confucio
"Nessuno può fabbricare una macchina tanto intelligente che possa essere
usata da uno sciocco" - Confucio
- nicolo_conte
- Prode Principiante
- Messaggi: 169
- Iscrizione: martedì 16 maggio 2006, 18:47
- Località: Mariano Comense (Como)
- Contatti:
Re: [Guida] AiGLX con Compiz per GNOME/KDE/XfCE su Edgy Eft
dopo l'ultimo aggiornamento aiglx non funziona più...ho controllato il file di configurazione "xorg.conf" ma sembrerebbe tutto ok...comunque ve lo posto qui:
qualche suggerimento??
Codice: Seleziona tutto
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "v4l"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA GeForce 7500LE"
Driver "nvidia"
Option "RenderAccel" "true"
Option "NoRenderExtension" "false"
Option "AllowGLXWithComposite" "true"
Option "AddARGBGLXVisuals" "true"
BusID "PCI:1:0:0"
VideoRam 512000
EndSection
Section "Monitor"
Identifier "Sony SDM-E76D"
Option "DPMS"
HorizSync 28-64
VertRefresh 43-60
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA GeForce 7500LE"
Monitor "Sony SDM-E76D"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Option "AIGLX" "true"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
Re: [Guida] AiGLX con Compiz per GNOME/KDE/XfCE su Edgy Eft
nicolo_conte ha scritto: dopo l'ultimo aggiornamento aiglx non funziona più...ho controllato il file di configurazione "xorg.conf" ma sembrerebbe tutto ok...comunque ve lo posto qui:
qualche suggerimento??
Io ho dovuto reinstallare i driver nvidia poi tutto ok
http://forum.ubuntu-it.org/viewtopic.php?t=39974
Re: [Guida] AiGLX con Compiz per GNOME/KDE/XfCE su Edgy Eft
Codice: Seleziona tutto
[quote="nicolo_conte"]
dopo l'ultimo aggiornamento aiglx non funziona più...ho controllato il file di configurazione "xorg.conf" ma sembrerebbe tutto ok...comunque ve lo posto qui:
[code]Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "v4l"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA GeForce 7500LE"
Driver "nvidia"
Option "RenderAccel" "true"
Option "NoRenderExtension" "false"
Option "AllowGLXWithComposite" "true"
Option "AddARGBGLXVisuals" "true"
BusID "PCI:1:0:0"
VideoRam 512000
EndSection
Section "Monitor"
Identifier "Sony SDM-E76D"
Option "DPMS"
HorizSync 28-64
VertRefresh 43-60
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA GeForce 7500LE"
Monitor "Sony SDM-E76D"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Option "AIGLX" "true"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
[/quote]
Devi disabilitare dri
E cancellare:
Section "DRI"
Mode 0666
EndSection[/code]
- Janvitus
- Amministratore
- Messaggi: 18778
- Iscrizione: lunedì 25 aprile 2005, 15:52
- Desktop: GNOME Shell / Xfce
- Sesso: Maschile
- Località: Potenza
- Contatti:
Re: [Guida] AiGLX con Compiz per GNOME/KDE/XfCE su Edgy Eft
Ad ogni aggiornamento di xorg si devono reistallare i driver video, penso che accada solo con i driver nvidia.nicolo_conte ha scritto: dopo l'ultimo aggiornamento aiglx non funziona più...ho controllato il file di configurazione "xorg.conf" ma sembrerebbe tutto ok...comunque ve lo posto qui:
Re: [Guida] AiGLX con Compiz per GNOME/KDE/XfCE su Edgy Eft
A me non è successo.Janvitus ha scritto:Ad ogni aggiornamento di xorg si devono reistallare i driver video, penso che accada solo con i driver nvidia.nicolo_conte ha scritto: dopo l'ultimo aggiornamento aiglx non funziona più...ho controllato il file di configurazione "xorg.conf" ma sembrerebbe tutto ok...comunque ve lo posto qui:
I driver si devono reinstallare solo quando c'è un aggiornamento del kernel.
- Janvitus
- Amministratore
- Messaggi: 18778
- Iscrizione: lunedì 25 aprile 2005, 15:52
- Desktop: GNOME Shell / Xfce
- Sesso: Maschile
- Località: Potenza
- Contatti:
Re: [Guida] AiGLX con Compiz per GNOME/KDE/XfCE su Edgy Eft
Sarà, ma accade anche a me, e non uso un kernel di ubuntu, ma uno compilato da me, e i driver sono quelli "originali" nvidiamattia77 ha scritto:
A me non è successo.
I driver si devono reinstallare solo quando c'è un aggiornamento del kernel.
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 6 ospiti