Pagina 3 di 3
Re: [Ati] Come attivare 3d su radeon 9550
Inviato: mercoledì 30 maggio 2007, 19:48
da winbusters
no sicuramente non la stai usando..lascia stare
cmq non ho ancora capito perchè non hai più usato il mio xorg...uffa non vi piacciono le cose semplici (bad)
Re: [Ati] Come attivare 3d su radeon 9550
Inviato: mercoledì 30 maggio 2007, 19:51
da Morpheo83
perchè ancora non ho capito che devo copiare nel mio...cmq ora ti posto il mio nuovo xorg.
Codice: Seleziona tutto
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
Fontpath "/usr/share/fonts/X11/misc"
Fontpath "/usr/share/fonts/X11/cyrillic"
Fontpath "/usr/share/fonts/X11/100dpi/:unscaled"
Fontpath "/usr/share/fonts/X11/75dpi/:unscaled"
Fontpath "/usr/share/fonts/X11/Type1"
Fontpath "/usr/share/fonts/X11/100dpi"
Fontpath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
Fontpath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
EndSection
Section "InputDevice"
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Device"
Identifier "Radeon 9550"
Driver "ati"
Busid "PCI:1:0:0"
Videoram 256000
Option "XAANoOffscreenPixmaps"
EndSection
Section "Monitor"
Identifier "Philips 190C"
Option "DPMS"
Horizsync 28-64
Vertrefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Radeon 9550"
Monitor "Philips 190C"
Defaultdepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Option "AIGLX" "true"
Identifier "Default Layout"
screen "Default Screen"
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
Inputdevice "stylus" "SendCoreEvents"
Inputdevice "cursor" "SendCoreEvents"
Inputdevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Re: [Ati] Come attivare 3d su radeon 9550
Inviato: mercoledì 30 maggio 2007, 19:59
da winbusters
secondo me questa righe qui non servono
Codice: Seleziona tutto
Section "Extensions"
Option "Composite" "Enable"
EndSection
fai una cosa fatti una copia del tuo xorg, togli quelle righe e vedi cosa succede
p.s. da quando la 9550 è da 256mb come leggo qui?
Section "Device"
Identifier "Radeon 9550"
Driver "ati"
Busid "PCI:1:0:0"
Videoram 256000
Option "XAANoOffscreenPixmaps"
EndSection
Re: [Ati] Come attivare 3d su radeon 9550
Inviato: mercoledì 30 maggio 2007, 20:02
da Morpheo83
E che ne so...a me è da 256MB!!
Codice: Seleziona tutto
therock@therock-desktop:~$ glxinfo|grep "direct rendering"
direct rendering: Yes
therock@therock-desktop:~$ glxinfo |grep vendor
server glx vendor string: SGI
client glx vendor string: SGI
OpenGL vendor string: Tungsten Graphics, Inc.
Quindi come puoi notare è tutto a posto. Quella linea di comando l'ho tolta ma mi da cmq gli stessi problemi...non riesco proprio a capire che diavolo sia successo! :'(
Re: [Ati] Come attivare 3d su radeon 9550
Inviato: mercoledì 30 maggio 2007, 20:04
da winbusters
quali?che non funzionano gli effetti?guarda che quando si modifica lo xorg bisogna riavviare!
Re: [Ati] Come attivare 3d su radeon 9550
Inviato: mercoledì 30 maggio 2007, 20:05
da Morpheo83
L'ho fatto ma non succede niente :-\
Re: [Ati] Come attivare 3d su radeon 9550
Inviato: mercoledì 30 maggio 2007, 20:13
da winbusters
cioè ma neanche se cerchi di avviarli manualmente vanno?
se hai un account msn aggiungimi pure stiamo postando troppo

Re: [Ati] Come attivare 3d su radeon 9550
Inviato: mercoledì 30 maggio 2007, 20:15
da Morpheo83
come si avviano manualmente ? :-[ Scusami ma non sono praticissimo...
Re: [Ati] Come attivare 3d su radeon 9550
Inviato: mercoledì 30 maggio 2007, 20:24
da winbusters
attiva effetti desktop da sistema->preferenze
[RISOLTO] Come attivare 3d su radeon 9550
Inviato: venerdì 1 giugno 2007, 21:35
da Morpheo83
Grande Ubuntu6!!!
Ho semplicemente copiato il tuo xorg...ed ora funziona tutto di nuovo!! grazie!! (good) (b2b)
Re: [RISOLTO] Come attivare 3d su radeon 9550
Inviato: venerdì 1 giugno 2007, 21:49
da winbusters
prego (b2b)