Pagina 1 di 3

[RISOLTO] Come attivare 3d su radeon 9550

Inviato: martedì 29 maggio 2007, 1:55
da Morpheo83
Ciao a tutta la comunity,
sono un nuovo utente Ubuntu feisty.
Come altri utenti, ho un problema con la mia ATI RADEON 9550.
Mi sapete dire come attivare l'accellerazione 3d?
Ho già installato beryl ma, ovviamente senza i driver giusti, non serve ad un bip...

Aiutatemi pls!  >:(

Re: [Ati] Come attivare 3d su radeon 9550

Inviato: martedì 29 maggio 2007, 7:36
da Solaris
per utilizzare Beryl o Compiz ti servono i driver Open a meno che tu nn abbia gnome con Xgl....se vuoi installare i driver proprietari per la tua scheda li devi cercare sul sito ati.amd.com e installarli dando i permessi al file con
chmod +x /[percorso]/nome_file.bin
e dopo
./nome_file.bin
per installarli
quelli open invece per essere installati devono essere scaricati con apt-get i pacchetti
xserver-xorg-video-ati
xlibmesa-dri
xlibmesa-gl
mesa-utils

Re: [Ati] Come attivare 3d su radeon 9550

Inviato: martedì 29 maggio 2007, 11:50
da Morpheo83
ok sto scaricando i driver da ati.amd.com...vediamo come va'!

Grazie per l'aiuto! 

Re: [Ati] Come attivare 3d su radeon 9550

Inviato: martedì 29 maggio 2007, 11:53
da Morpheo83
mmm...houston abbiamo un problema...che significa questa maschera???

Re: [Ati] Come attivare 3d su radeon 9550

Inviato: martedì 29 maggio 2007, 11:55
da Divilinux
::) quello script non si apre con un editor di testo..c'e' tutta una procedura da seguire

Re: [Ati] Come attivare 3d su radeon 9550

Inviato: martedì 29 maggio 2007, 12:03
da Morpheo83
chiedo scusa per la mia ignoranza in materia...sto imparando da ieri!

Quale sarebbe la procedura: make, make install ?

Re: [Ati] Come attivare 3d su radeon 9550

Inviato: martedì 29 maggio 2007, 12:05
da Divilinux
si..magari
leggi qui perche' il wiki non lo trovo

http://divilinux.wordpress.com/2007/04/ ... buntu-704/

Re: [Ati] Come attivare 3d su radeon 9550

Inviato: martedì 29 maggio 2007, 12:07
da Morpheo83
ok ora provo, grazie!  :)

Re: [Ati] Come attivare 3d su radeon 9550

Inviato: martedì 29 maggio 2007, 13:13
da Morpheo83
Divilinux ha scritto: si..magari
leggi qui perche' il wiki non lo trovo

http://divilinux.wordpress.com/2007/04/ ... buntu-704/

Ho provato questo link...ho seguito tutte le istruzioni...ma il risultato è sempre lo stesso:
glxinfo | grep rendering
direct rendering: No
fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: Tungsten Graphics, Inc.
OpenGL renderer string: Mesa DRI R300 20060815 AGP 1x x86/MMX+/3DNow!+/SSE TCL
OpenGL version string: 1.3 Mesa 6.5.2

>:(

Re: [Ati] Come attivare 3d su radeon 9550

Inviato: martedì 29 maggio 2007, 14:05
da morfeo68
stesso problema con ati radeon pro 9600 256 mb
non supporta gli effetti speciali e il 3d
se qualcuno e' riuscito ad abilitarli lo faccia sapere
possibile che il problema sia dovto al fatto che la scheda supporti il 3d solo in modo sperimentale
dato che ho i driver open source
credo con i driver proprietari il 3d non sia supportato per la 9600 pro (forse anche 9550)
confermate?

Re: [Ati] Come attivare 3d su radeon 9550

Inviato: martedì 29 maggio 2007, 15:39
da Divilinux
@morfeo68
il modulo "radeon" opensources,che fornisce l'acc3d per le schede ati..,supporta normalmente anche gli effetti desktop piu' svariati
li uso con una radeon 9200
quello che posso dire e'..controllare e ricontrollare bene tutto...molto spesso sulle cose si passa via cosi'

Re: [Ati] Come attivare 3d su radeon 9550

Inviato: martedì 29 maggio 2007, 15:50
da morfeo68
io ho seguito il wiki su i driver open source e dice che il supporto al 3d e' sperimentale
ma il modulo "radeon" opensources dove lo trovo?
sul wiki non c'e' traccia
tnx

Re: [Ati] Come attivare 3d su radeon 9550

Inviato: martedì 29 maggio 2007, 16:02
da Divilinux
il modulo radeon e' incuso nel kernel,fa parte dei mesa3D..a te servono  i sub-driver

xserver-xorg-video-ati

Re: [Ati] Come attivare 3d su radeon 9550

Inviato: martedì 29 maggio 2007, 16:17
da morfeo68
xserver-xorg-video-ati
e' gia' installato
come detto ho seguito la guida
non ho tirato i driver o meglio gli ho tirati ma rallentavano tutto
ora sono disinstallati
altri suggerimenti
tnx

Re: [Ati] Come attivare 3d su radeon 9550

Inviato: martedì 29 maggio 2007, 16:31
da Divilinux
rallentava tutto.. :o
ma..quello che voglio sapere..i driver erano..sono installati?..spesso bisogna mettere mano allo xorg.conf
puoi postare l'output di

lsmod | grep radeon
glxinfo | grep rendering

e anche il contenuto del file xorg.conf?

Re: [Ati] Come attivare 3d su radeon 9550

Inviato: martedì 29 maggio 2007, 17:21
da morfeo68
marco@marco-desktop:~$ lsmod | grep radeon
radeon                124576  0
drm                    81044  1 radeon
marco@marco-desktop:~$ glxinfo | grep rendering
direct rendering: No

Codice: Seleziona tutto

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/X11/fonts/misc"
	FontPath	"/usr/share/X11/fonts/cyrillic"
	FontPath	"/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/Type1"
	FontPath	"/usr/share/X11/fonts/100dpi"
	FontPath	"/usr/share/X11/fonts/75dpi"
	FontPath	"/usr/share/fonts/X11/misc"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"it"
	Option		"XkbOptions"	"lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ExplorerPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"ATI Technologies, Inc. RV350 AP [Radeon 9600]"
	Driver		"ati"
	BusID		"PCI:1:0:0"
EndSection

Section "Monitor"
	Identifier	"SDM-S74"
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies, Inc. RV350 AP [Radeon 9600]"
	Monitor		"SDM-S74"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Option          "AIGLX"         "true"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus" "SendCoreEvents"
	InputDevice     "cursor" "SendCoreEvents"
	InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
	Mode	0666
EndSection

Re: [Ati] Come attivare 3d su radeon 9550

Inviato: martedì 29 maggio 2007, 19:37
da Solaris
la domanda forse è superflua...hai riavviato lo xorg?

Re: [Ati] Come attivare 3d su radeon 9550

Inviato: martedì 29 maggio 2007, 20:07
da winbusters
hey ma io ho la stessa scheda video ma non ho dovuto fare nulla per mettere gli effetti !!!sicuro di non aver modificato o seguito qualche guida prima ancora di sapere di avere già l'accelerazione 3d??

Re: [Ati] Come attivare 3d su radeon 9550

Inviato: martedì 29 maggio 2007, 20:16
da winbusters
stavo pensando....visto che abbiamo la stessa scheda video e ma funziona tutto compreso beryl e compiz potrei postare il mio xorg.conf  a lui potrebbe bastare copiare e incollarlo? ho sentito dire che si può fare ma non so ditemi un po voi

Re: [Ati] Come attivare 3d su radeon 9550

Inviato: martedì 29 maggio 2007, 20:32
da Morpheo83
ma quale scheda video scusa? la mia o la sua?