Pagina 1 di 1

desktop cubo 3d

Inviato: mercoledì 6 giugno 2007, 20:09
da lorenzo91
come da titolo..ho visto che si può fare...ma sono un n00b di ubuntu..qualcuno sa dirmi come fare ad averlo con una guida semplicissima..
ho una scheda video ati

Re: desktop cubo 3d

Inviato: mercoledì 6 giugno 2007, 20:11
da digy79
Se non installi i driver fglrx (ossia quelli che puoi installare semplicemente con la funzione "restricted drivers") dovrebbe bastarti abilitare gli effetti desktop mettendo la spunta anche sull'effetto cubo.

Re: desktop cubo 3d

Inviato: mercoledì 6 giugno 2007, 20:13
da hikcitung
c'è la documentazione guidata è fra gli effetti di beryl e compiz

Re: desktop cubo 3d

Inviato: mercoledì 6 giugno 2007, 20:23
da lorenzo91
non mi fa accedere ad effetti desktop..mi dice che l'estensione composite non è disponibile

Re: desktop cubo 3d

Inviato: mercoledì 6 giugno 2007, 20:24
da hikcitung
digita composite da terminale

Re: desktop cubo 3d

Inviato: mercoledì 6 giugno 2007, 20:26
da Kaspiterina
che driver hai installato?
posta il tuo xorg.conf

cat /etc/X11/xorg.conf

copia e incolla e lo vediamo insieme

Re: desktop cubo 3d

Inviato: mercoledì 6 giugno 2007, 20:30
da lorenzo91
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#  sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
        Fontpath        "/usr/share/fonts/X11/misc"
        Fontpath        "/usr/share/fonts/X11/cyrillic"
        Fontpath        "/usr/share/fonts/X11/100dpi/:unscaled"
        Fontpath        "/usr/share/fonts/X11/75dpi/:unscaled"
        Fontpath        "/usr/share/fonts/X11/Type1"
        Fontpath        "/usr/share/fonts/X11/100dpi"
        Fontpath        "/usr/share/fonts/X11/75dpi"
        # path to defoma fonts
        Fontpath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
        Load            "i2c"
        Load            "bitmap"
        Load            "ddc"
        Load            "dri"
        Load            "extmod"
        Load            "freetype"
        Load            "glx"
        Load            "int10"
        Load            "vbe"
EndSection

Section "InputDevice"
        Identifier      "Generic Keyboard"
        Driver          "kbd"
        Option          "CoreKeyboard"
        Option          "XkbRules"      "xorg"
        Option          "XkbModel"      "pc105"
        Option          "XkbLayout"    "it"
EndSection

Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"        "/dev/input/mice"
        Option          "Protocol"      "ImPS/2"
        Option          "ZAxisMapping"  "4 5"
        Option          "Emulate3Buttons"      "true"
EndSection

Section "InputDevice"
        Identifier      "Synaptics Touchpad"
        Driver          "synaptics"
        Option          "SendCoreEvents"        "true"
        Option          "Device"        "/dev/psaux"
        Option          "Protocol"      "auto-dev"
        Option          "HorizScrollDelta"      "0"
EndSection

Section "InputDevice"
        Driver          "wacom"
        Identifier      "stylus"
        Option          "Device"        "/dev/input/wacom"
        Option          "Type"  "stylus"
        Option          "ForceDevice"  "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
        Driver          "wacom"
        Identifier      "eraser"
        Option          "Device"        "/dev/input/wacom"
        Option          "Type"  "eraser"
        Option          "ForceDevice"  "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
        Driver          "wacom"
        Identifier      "cursor"
        Option          "Device"        "/dev/input/wacom"
        Option          "Type"  "cursor"
        Option          "ForceDevice"  "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
        Identifier      "ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]"
        Driver          "ati"
        Busid          "PCI:1:0:0"
EndSection

Section "Monitor"
        Identifier      "Monitor Generico"
        Option          "DPMS"
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Device          "ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]"
        Monitor        "Monitor Generico"
        Defaultdepth    24
        SubSection "Display"
                Depth  1
                Modes          "1280x800"
        EndSubSection
        SubSection "Display"
                Depth  4
                Modes          "1280x800"
        EndSubSection
        SubSection "Display"
                Depth  8
                Modes          "1280x800"
        EndSubSection
        SubSection "Display"
                Depth  15
                Modes          "1280x800"
        EndSubSection
        SubSection "Display"
                Depth  16
                Modes          "1280x800"
        EndSubSection
        SubSection "Display"
                Depth  24
                Modes          "1280x800"
        EndSubSection
EndSection

Section "ServerLayout"
        Identifier      "Default Layout"
  screen "Default Screen"
        Inputdevice    "Generic Keyboard"
        Inputdevice    "Configured Mouse"
        Inputdevice    "stylus"        "SendCoreEvents"
        Inputdevice    "cursor"        "SendCoreEvents"
        Inputdevice    "eraser"        "SendCoreEvents"
        Inputdevice    "Synaptics Touchpad"
EndSection

Section "DRI"
        Mode    0666
EndSection
Section "Extensions"
        Option          "Composite"    "0"
EndSection
lorenzo@lorenzo-laptop:~$
i driver prima li avevo messi quelli con la restrizione..ora ho cambiato scrivendo ati

Re: desktop cubo 3d

Inviato: mercoledì 6 giugno 2007, 21:28
da lorenzo91
raga su rispondete  :)

Re: desktop cubo 3d

Inviato: mercoledì 6 giugno 2007, 21:37
da maxfact

Codice: Seleziona tutto

Section "Extensions"
        Option          "Composite"     "0"
EndSection
al posto di 0 zero scrivi Enable con E maiuscola

Re: desktop cubo 3d

Inviato: mercoledì 6 giugno 2007, 23:05
da lorenzo91
mi sa ho fatto casino perchè mi da la stessa cosa..potete dirmi passo per passo cosa digitare in terminale per far aprire il xorg.conf da modificare??

Re: desktop cubo 3d

Inviato: giovedì 7 giugno 2007, 1:17
da flemmatico_dilemma
basta il comando

sudo nano /etc/X11/xorg.conf

prima però ti consiglio di fartene una copia di backup (sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf_bk)

Re: desktop cubo 3d

Inviato: giovedì 7 giugno 2007, 8:05
da ema92

Codice: Seleziona tutto

 sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf.back && gksu gedit /etc/X11/xorg.conf 

Re: desktop cubo 3d

Inviato: giovedì 7 giugno 2007, 10:30
da Alfredo
lorenzo91 ha scritto: come da titolo..ho visto che si può fare...ma sono un n00b di ubuntu..qualcuno sa dirmi come fare ad averlo con una guida semplicissima..
ho una scheda video ati
Hai provato con questa guida?

Re: desktop cubo 3d

Inviato: giovedì 7 giugno 2007, 14:00
da lorenzo91
la mia n00bietà su ubuntu è  ai massimi livelli..fino a 7 giorni fa non sapevo neanche del terminale..cmq ho modificato il file xorg.conf e ho messo Enable..ho attivato gli effetti desktop e è successo un casino totale.....ho riavviato e sembra andare bene...ho disabilitato i driver con restrizioni e sembra non sfarfallare....
adesso come posso ottenere questo cubo 3d??

Re: desktop cubo 3d

Inviato: giovedì 7 giugno 2007, 14:32
da flemmatico_dilemma
che scheda ati hai?

Re: desktop cubo 3d

Inviato: sabato 9 giugno 2007, 7:52
da lorenzo91
ati mobility radeon 9700

Re: desktop cubo 3d

Inviato: sabato 9 giugno 2007, 12:44
da maxfact
partiamo un po da capo
dai da terminale questo comando
glxinfo | grep rendering
se come risposta da yes hai l accellerazione 3d  (good)
se dice no devi attivarla poi vedremo come fare  (yes)