Posta il tuo .conkyrc & png ""Leggete in 1°Pagina conkyForecast""

[Lo Zio]

(good)
(good)
(good)
(good)
(good)
e'gia'un'inizio!!!!
credo devo allungare lo spazio del conky e devo ancora eliminare la vecchia immagine della temp...xo'cavolo!!! sono SUPER-LOL ragazzi!!!!!!!!!

[Smilzo.Domenico]

allora ho capito come funzia. Ho scaricato uno script lua che mi sembrava carino ma lo vedo fuori asse. posto così mi spiego meglio =)

[MI|RO]

allora ho capito come funzia. Ho scaricato uno script lua che mi sembrava carino ma lo vedo fuori asse. posto così mi spiego meglio =)

Devi diminuire i font e modificare i valori di voffset nel conkyrc, facile.

[Lo Zio]

LOLLISSIMO!!! Forse ci siamo! 



Ancora non ci credo...ma questo e' il primo conky che creo!!!  (b2b) (good)
Manca ancora qualche ritocco alla posizione e dimensione,e poi devo SOLO piu'creare le barre con i rispettivi comandi!  (good)

[Iacoporosso]

hahaha bellina come idea... però in basso si vede che hai corretto l'immagine :P :P un lavoro di gimp più meticoloso la prossima volta!!  (b2b)

[Lo Zio]

hahaha bellina come idea... però in basso si vede che hai corretto l'immagine  un lavoro di gimp più meticoloso la prossima volta!!  (b2b)

(rotfl) si lo avevo gia'notato...ma sto lavorando per creare le barre (la modifica dell'immagine e'il meno)
problema...  (rotfl) ho appena fatto casini e'ho incasinato il tutto!!!  (good) si riparte da zero!

[Smilzo.Domenico]

Ragazzi con quale sito posso sostituire questo?

Codice: Seleziona tutto

weather http://weather.noaa.gov/pub/data/observations/metar/stations/ LIBP temperature temperature 30

Perche qui non c'è la mia cittadella  ::)

[TUX5+0]

Ragazzi con quale sito posso sostituire questo?

Codice: Seleziona tutto

weather http://weather.noaa.gov/pub/data/observations/metar/stations/ LIBP temperature temperature 30

Perche qui non c'è la mia cittadella  ::)

Codice: Seleziona tutto

sudo wget -q http://www.kaivalagi.com/ubuntu/ppa/m-buck-conky-jaunty.list -O /etc/apt/sources.list.d/m-buck-conky-jaunty.list 

devi registrarti prima.

[deegan]

Ciao ragazzi.... 
Su un sito giapponese ho trovato in tipo che ha inserito queste stringhe nel conky, per monitorare la sua GPU  che poi è come la mia......  (yes)
Ma come mai a mè non funziona? 

Codice: Seleziona tutto

##ATI GPU
${color #F70101}GPU:
${color #F70101}Adapter: ${exec aticonfig --od-getclocks | grep 'Default Adapter' | sed -e 's/^.* \-//' -e '/^$/d'}
${color #F70101}Load:${execi 4 aticonfig --od-getclocks | grep 'GPU load' | sed -e 's/^.* \([0-9]\+\)\%/\1/'} % ${alignr}${color #F70101}Temperature: +${execi 8 aticonfig --od-gettemperature | grep Temperature | cut -c42-44 | sed -e 's/ //g'} C
#${color #F70101}Load graph
#${color #FFA6D2}${execigraph 4 aticonfig --od-getclocks | grep 'GPU load' | sed -e 's/^.* \([0-9]\+\)\%/\1/'}
${color #F70101}Core Clocks : ${execi 8 aticonfig --od-getclocks | grep 'Current Clocks' | cut -c31-35 | sed -e 's/ //g'}MHz (Peak:${execi 8 aticonfig --od-getclocks | grep 'Current Peak' | cut -c31-35 | sed -e 's/ //g'}MHz)
${color #F70101}Memory Clocks : ${execi 8 aticonfig --od-getclocks | grep 'Current Clocks' | cut -c45-49 | sed -e 's/ //g'}MHz (Peak:${execi 8 aticonfig --od-getclocks | grep 'Current Peak' | cut -c45-49 | sed -e 's/ //g'}MHz)
${color #F70101}GPU Fan Speed : ${execi 8 aticonfig --pplib-cmd "get fanspeed 0" | grep 'Result:' | cut -c19-21} % 

***Grazie***

[zeruel85]

Ciao ragazzi.... 
Su un sito giapponese ho trovato in tipo che ha inserito queste stringhe nel conky, per monitorare la sua GPU  che poi è come la mia......  (yes)
Ma come mai a mè non funziona? 

Codice: Seleziona tutto

##ATI GPU
${color #F70101}GPU:
${color #F70101}Adapter: ${exec aticonfig --od-getclocks | grep 'Default Adapter' | sed -e 's/^.* \-//' -e '/^$/d'}
${color #F70101}Load:${execi 4 aticonfig --od-getclocks | grep 'GPU load' | sed -e 's/^.* \([0-9]\+\)\%/\1/'} % ${alignr}${color #F70101}Temperature: +${execi 8 aticonfig --od-gettemperature | grep Temperature | cut -c42-44 | sed -e 's/ //g'} C
#${color #F70101}Load graph
#${color #FFA6D2}${execigraph 4 aticonfig --od-getclocks | grep 'GPU load' | sed -e 's/^.* \([0-9]\+\)\%/\1/'}
${color #F70101}Core Clocks : ${execi 8 aticonfig --od-getclocks | grep 'Current Clocks' | cut -c31-35 | sed -e 's/ //g'}MHz (Peak:${execi 8 aticonfig --od-getclocks | grep 'Current Peak' | cut -c31-35 | sed -e 's/ //g'}MHz)
${color #F70101}Memory Clocks : ${execi 8 aticonfig --od-getclocks | grep 'Current Clocks' | cut -c45-49 | sed -e 's/ //g'}MHz (Peak:${execi 8 aticonfig --od-getclocks | grep 'Current Peak' | cut -c45-49 | sed -e 's/ //g'}MHz)
${color #F70101}GPU Fan Speed : ${execi 8 aticonfig --pplib-cmd "get fanspeed 0" | grep 'Result:' | cut -c19-21} % 

***Grazie***

ma tu usi i driver ati proprietari o quelli open forniti dalla distro che utilizzi? posta anche gli eventuali errori di conky lanciato da terminale.

[deegan]

ma tu usi i driver ati proprietari o quelli open forniti dalla distro che utilizzi? posta anche gli eventuali errori di conky lanciato da terminale.

quelli open forniti dalla distro

[MI|RO]

Quelli forniti dalla distro non sono open, sono proprietari, i driver open li hai già installati durante il processo di installazione della distro. Quelli in figura sono i proprietari Ati che trovi anche nel sito ufficiale.

[zeruel85]

ok, in ogni caso il comando "aticonfig" dovrebbe funzionare quindi. bisognerebbe capire se ad terminale conky ti restituisce qualche errore.

[deegan]

Ok, sono arrivato ora dal lavoro,..... ecco l'errore che mi dà il terminale::  ;)

Codice: Seleziona tutto

 mercoledì 13 luglio. 2011 - 21.49 
Lucid Lynx 10.04 ¥~  conky -c .conkyrcATI
Conky: missing command argument to execgraph object
Conky: desktop window (16000b6) is subwindow of root window (a5)
Conky: window type - override
Conky: drawing to created window (0x4400001)
Conky: drawing to double buffer
No layout section was found in the file: '/etc/X11/xorg.conf'.
Please run 'aticonfig --initial' first or modify your configurationfile manually and run aticonfig again.
aticonfig: parsing the command-line failed.
No layout section was found in the file: '/etc/X11/xorg.conf'.
Please run 'aticonfig --initial' first or modify your configurationfile manually and run aticonfig again.
aticonfig: parsing the command-line failed.
No layout section was found in the file: '/etc/X11/xorg.conf'.
Please run 'aticonfig --initial' first or modify your configurationfile manually and run aticonfig again.
aticonfig: parsing the command-line failed.
No layout section was found in the file: '/etc/X11/xorg.conf'.
Please run 'aticonfig --initial' first or modify your configurationfile manually and run aticonfig again.
aticonfig: parsing the command-line failed.
No layout section was found in the file: '/etc/X11/xorg.conf'.
Please run 'aticonfig --initial' first or modify your configurationfile manually and run aticonfig again.
aticonfig: parsing the command-line failed.
No layout section was found in the file: '/etc/X11/xorg.conf'.
Please run 'aticonfig --initial' first or modify your configurationfile manually and run aticonfig again.
aticonfig: parsing the command-line failed.
No layout section was found in the file: '/etc/X11/xorg.conf'.
Please run 'aticonfig --initial' first or modify your configurationfile manually and run aticonfig again.
aticonfig: parsing the command-line failed.
No layout section was found in the file: '/etc/X11/xorg.conf'.
Please run 'aticonfig --initial' first or modify your configurationfile manually and run aticonfig again.
aticonfig: parsing the command-line failed.
No layout section was found in the file: '/etc/X11/xorg.conf'.
Please run 'aticonfig --initial' first or modify your configurationfile manually and run aticonfig again.
aticonfig: parsing the command-line failed.
No layout section was found in the file: '/etc/X11/xorg.conf'.
Please run 'aticonfig --initial' first or modify your configurationfile manually and run aticonfig again.
aticonfig: parsing the command-line failed.
No layout section was found in the file: '/etc/X11/xorg.conf'.
Please run 'aticonfig --initial' first or modify your configurationfile manually and run aticonfig again.
aticonfig: parsing the command-line failed.
No layout section was found in the file: '/etc/X11/xorg.conf'.
Please run 'aticonfig --initial' first or modify your configurationfile manually and run aticonfig again.
aticonfig: parsing the command-line failed.
No layout section was found in the file: '/etc/X11/xorg.conf'.
Please run 'aticonfig --initial' first or modify your configurationfile manually and run aticonfig again.
aticonfig: parsing the command-line failed.
No layout section was found in the file: '/etc/X11/xorg.conf'.
Please run 'aticonfig --initial' first or modify your configurationfile manually and run aticonfig again.
aticonfig: parsing the command-line failed.
No layout section was found in the file: '/etc/X11/xorg.conf'.
Please run 'aticonfig --initial' first or modify your configurationfile manually and run aticonfig again.
aticonfig: parsing the command-line failed.
^CConky: received SIGINT or SIGTERM to terminate. bye!
Lucid Lynx 10.04 ¥~ 

E questo è lo xorg.conf::

Codice: Seleziona tutto

Section "Screen"
	Identifier	"Default Screen"
	DefaultDepth	24
EndSection

Section "Module"
	Load	"glx"
EndSection

Section "Device"
	Identifier	"Default Device"
	Driver	"fglrx"
EndSection

E questo::

Codice: Seleziona tutto

 mercoledì 13 luglio. 2011 - 21.54 
Lucid Lynx 10.04 ¥~ aticonfig --initial
Found fglrx primary device section
 Unable to find any supported Screen sections

[alecive]

Please run 'aticonfig --initial' first or modify your configurationfile manually and run aticonfig again.

Hai provato a digitare in un terminale:

Codice: Seleziona tutto

aticonfig --initial

[deegan]

Please run 'aticonfig --initial' first or modify your configurationfile manually and run aticonfig again.

Hai provato a digitare in un terminale:

Codice: Seleziona tutto

aticonfig --initial

Certo,  (yes) guarda sù... 

[alecive]

Ops scusa.. mi sembrava troppo facile!

[deegan]

Ops scusa.. mi sembrava troppo facile!

....

[Smilzo.Domenico]

mi sembra un po troppo che non posto e allora:



File .Lua

Codice: Seleziona tutto

 --[[
Clock Rings by Linux Mint (2011) reEdited by despot77

This script draws percentage meters as rings, and also draws clock hands if you want! It is fully customisable; all options are described in the script. This script is based off a combination of my clock.lua script and my rings.lua script.

IMPORTANT: if you are using the 'cpu' function, it will cause a segmentation fault if it tries to draw a ring straight away. The if statement on line 145 uses a delay to make sure that this doesn't happen. It calculates the length of the delay by the number of updates since Conky started. Generally, a value of 5s is long enough, so if you update Conky every 1s, use update_num>5 in that if statement (the default). If you only update Conky every 2s, you should change it to update_num>3; conversely if you update Conky every 0.5s, you should use update_num>10. ALSO, if you change your Conky, is it best to use "killall conky; conky" to update it, otherwise the update_num will not be reset and you will get an error.

To call this script in Conky, use the following (assuming that you save this script to ~/scripts/rings.lua):
    lua_load ~/scripts/clock_rings.lua
    lua_draw_hook_pre clock_rings
    
Changelog:
+ v1.0 -- Original release (30.09.2009)
   v1.1p -- Jpope edit londonali1010 (05.10.2009)
*v Mint-lua -- reEdit despot77 (18.02.2011)
]]

settings_table = {
    
    {
        name='cpu',
        arg='cpu0',
        max=100,
        bg_colour=0xffffff,
        bg_alpha=0.2,
        fg_colour=0xFF3300,
        fg_alpha=0.8,
        x=163, y=280,
        radius=25,
        thickness=25,
        start_angle=-90,
        end_angle=180
    },
    {
        name='memperc',
        arg='',
        max=100,
        bg_colour=0xffffff,
        bg_alpha=0.2,
        fg_colour=0xFF3300,
        fg_alpha=0.8,
        x=163, y=360,
        radius=25,
        thickness=25,
        start_angle=-90,
        end_angle=180
    },
    {
        name='swapperc',
        arg='',
        max=100,
        bg_colour=0xffffff,
        bg_alpha=0.2,
        fg_colour=0xFF3300,
        fg_alpha=0.8,
        x=163, y=440,
        radius=25,
        thickness=25,
        start_angle=-90,
        end_angle=180
    },
    {
        name='fs_used_perc',
        arg='/',
        max=100,
        bg_colour=0xffffff,
        bg_alpha=0.2,
        fg_colour=0xFF3300,
        fg_alpha=0.8,
        x=163, y=520,
        radius=25,
        thickness=25,
        start_angle=-90,
        end_angle=180
    },
        {
        name='downspeedf',
        arg='eth0',
        max=210,
        bg_colour=0xffffff,
        bg_alpha=0.2,
        fg_colour=0xFF3300,
        fg_alpha=0.8,
        x=165, y=600,
        radius=30,
        thickness=12,
        start_angle=-90,
        end_angle=180
    },
        {
        name='upspeedf',
        arg='eth0',
        max=100,
        bg_colour=0xffffff,
        bg_alpha=0.2,
        fg_colour=0xff3300,
        fg_alpha=0.8,
        x=165, y=600,
        radius=16,
        thickness=12,
        start_angle=-90,
        end_angle=180
    },
}

-- Use these settings to define the origin and extent of your clock.

clock_r=65

-- "clock_x" and "clock_y" are the coordinates of the centre of the clock, in pixels, from the top left of the Conky window.

clock_x=100
clock_y=150

show_seconds=true

require 'cairo'

function rgb_to_r_g_b(colour,alpha)
    return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
end

function draw_ring(cr,t,pt)
    local w,h=conky_window.width,conky_window.height
    
    local xc,yc,ring_r,ring_w,sa,ea=pt['x'],pt['y'],pt['radius'],pt['thickness'],pt['start_angle'],pt['end_angle']
    local bgc, bga, fgc, fga=pt['bg_colour'], pt['bg_alpha'], pt['fg_colour'], pt['fg_alpha']

    local angle_0=sa*(2*math.pi/360)-math.pi/2
    local angle_f=ea*(2*math.pi/360)-math.pi/2
    local t_arc=t*(angle_f-angle_0)

    -- Draw background ring

    cairo_arc(cr,xc,yc,ring_r,angle_0,angle_f)
    cairo_set_source_rgba(cr,rgb_to_r_g_b(bgc,bga))
    cairo_set_line_width(cr,ring_w)
    cairo_stroke(cr)
    
    -- Draw indicator ring

    cairo_arc(cr,xc,yc,ring_r,angle_0,angle_0+t_arc)
    cairo_set_source_rgba(cr,rgb_to_r_g_b(fgc,fga))
    cairo_stroke(cr)        
end

function draw_clock_hands(cr,xc,yc)
    local secs,mins,hours,secs_arc,mins_arc,hours_arc
    local xh,yh,xm,ym,xs,ys
    
    secs=os.date("%S")    
    mins=os.date("%M")
    hours=os.date("%I")
        
    secs_arc=(2*math.pi/60)*secs
    mins_arc=(2*math.pi/60)*mins+secs_arc/60
    hours_arc=(2*math.pi/12)*hours+mins_arc/12
         
end

function conky_clock_rings()
    local function setup_rings(cr,pt)
        local str=''
        local value=0
        
        str=string.format('${%s %s}',pt['name'],pt['arg'])
        str=conky_parse(str)
        
        value=tonumber(str)
        pct=value/pt['max']
        
        draw_ring(cr,pct,pt)
    end
    
    -- Check that Conky has been running for at least 5s

    if conky_window==nil then return end
    local cs=cairo_xlib_surface_create(conky_window.display,conky_window.drawable,conky_window.visual, conky_window.width,conky_window.height)
    
    local cr=cairo_create(cs)    
    
    local updates=conky_parse('${updates}')
    update_num=tonumber(updates)
    
    if update_num>5 then
        for i in pairs(settings_table) do
            setup_rings(cr,settings_table[i])
        end
    end
    
    draw_clock_hands(cr,clock_x,clock_y)
end

.conkyrc

Codice: Seleziona tutto

nky settings #
background no
update_interval 1

cpu_avg_samples 2
net_avg_samples 2

override_utf8_locale yes

double_buffer yes
no_buffers yes

text_buffer_size 2048
#imlib_cache_size 0

temperature_unit fahrenheit

# Window specifications #

own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below

border_inner_margin 0
border_outer_margin 0

minimum_size 200 250
maximum_width 200

alignment br
gap_x 35
gap_y 55

# Graphics settings #
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no

# Text settings #
use_xft yes
override_utf8_locale yes
xftfont Neuropolitical:size=8
xftalpha 0.8
uppercase no

temperature_unit celsius

default_color FFFFFF

# Lua Load  #
lua_load ~/.lua/scripts/clock_rings.lua
lua_draw_hook_pre clock_rings

TEXT
${font Neuropolitical:size=42}${time %e}
${goto 100}${font Neuropolitical:size=18}${color FF3300}${voffset -75}${time %b}
${font Neuropolitical:size=10}${color FF3300}${voffset 15}${time %A}${color FF3300}${hr}
${goto 100}${font Neuropolitical:size=15}${color FFFFFF}${voffset -35}${time %Y}
${font Neuropolitical:size=30}${voffset 40}${alignc}${time %H}:${time %M}
${goto 175}${voffset -35}${font Neuropolitical:size=10}${time %S}
${voffset 10}${font Neuropolitical:size=11}${color FF3300}${alignr}Avezzano${font}
${font Neuropolitical:size=13}${color FFFFFF}${alignr}Temp: ${weather http://weather.noaa.gov/pub/data/observations/metar/stations/ LIBP temperature temperature 30} °C${font}
${hr}
${image ~/.logoconky.png -p 165,10 -s 35x35}
${color FFFFFF}${font Neuropolitical:size=8}Public Ip: ${execi 1 ~/.scripts/ip.sh}
${color FFFFFF}${font Neuropolitical:size=8}Uptime: ${uptime_short}
${color FFFFFF}${font Neuropolitical:size=8}Processes: ${processes}
${color FFFFFF}${font Neuropolitical:size=8}Running: ${running_processes}

${color FF3300}${goto 125}${voffset 27}CPU
${color FFFFFF}${goto 125}${cpu cpu0}%
${color FF3300}${goto 125}${voffset 55}RAM
${color FFFFFF}${goto 125}${memperc}%
${color FF3300}${goto 125}${voffset 56}Swap
${color FFFFFF}${goto 125}${swapperc}%
${color FF3300}${goto 125}${voffset 57}Disk
${color FFFFFF}${goto 125}${fs_used_perc /}%
${color FF3300}${goto 130}${voffset 55}Net
${color FFFFFF}${goto 120}${downspeed eth0}
${color FFFFFF}${goto 120}${upspeed eth0}


${color FF3300}${font Neuropolitical:size=8} GPU Temp: ${alignr}${execi 30 nvidia-settings -q gpucoretemp | grep '):' | awk '{print $4}' | sed 's/\.//'}°C
${color FF3300}${font Neuropolitical:size=8} HDD Temp: ${alignr}${hddtemp /dev/sda}°C
${hr}

Che ve ne pare?  (good)

[Lo Zio]

mi sembra un po troppo che non posto e allora:



Che ve ne pare?  (good)

(rotfl) e'quello che mi ha incasinato la vita! comunque mi piace un sacco anche se lo preferisco in questa versione

ha gli anelli piu'piccoli e mi piace parecchio l'orologio con gli anelli che si colorano in base alla posizione delle lancette