anche se lancio kino da terminale con sudo niente.
se lancio il comando
lsmod | grep 1394
ottengo questi valori
dv1394 20696 0
video1394 19672 0
raw1394 30328 0
ohci1394 36528 2 dv1394,video1394
ieee1394 299448 5 dv1394,video1394,raw1394,sbp2,ohci1394
I permessi sono stati dati:
KERNEL=="raw1394", MODE="0666", GROUP="video" (e disk)
KERNEL=="dv1394*", MODE="0666", GROUP="video"
KERNEL=="video1394*", MODE="0666", GROUP="video"
e se lancio il comando dmesg ottengo
dmesg:
0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 2.6.20-16.29-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fef0000 end: 000000003fff0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003fff0000 size: 0000000000003000 end: 000000003fff3000 type: 4
[ 0.000000] copy_e820_map() start: 000000003fff3000 size: 000000000000d000 end: 0000000040000000 type: 3
[ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f3a00
[ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262128
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262128
[ 0.000000] On node 0 totalpages: 262128
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32497 pages, LIFO batch:7
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP (v000 Nvidia ) @ 0x000f7b80
[ 0.000000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3080
[ 0.000000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3180
[ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x3fff9200
[ 0.000000] ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff93c0
[ 0.000000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff90c0
[ 0.000000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:15 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] Detected 1809.267 MHz processor.
[ 15.216246] Built 1 zonelists. Total pages: 260081
[ 15.216249] Kernel command line: root=UUID=379a4747-f697-454a-af7a-8063a7fc1389 ro quiet splash locale=it_IT
[ 15.216393] mapped APIC to ffffd000 (fee00000)
[ 15.216395] mapped IOAPIC to ffffc000 (fec00000)
[ 15.216398] Enabling fast FPU save and restore... done.
[ 15.216401] Enabling unmasked SIMD FPU exception support... done.
[ 15.216408] Initializing CPU#0
[ 15.216446] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 15.217310] Console: colour VGA+ 80x25
[ 15.217707] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 15.218394] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 15.240283] Memory: 1028308k/1048512k available (1992k kernel code, 19464k reserved, 900k data, 328k init, 131008k highmem)
[ 15.240294] virtual kernel memory layout:
[ 15.240295] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 15.240297] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 15.240298] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 15.240299] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 15.240301] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
[ 15.240302] .data : 0xc02f2374 - 0xc03d36d4 ( 900 kB)
[ 15.240303] .text : 0xc0100000 - 0xc02f2374 (1992 kB)
[ 15.240306] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 15.316284] Calibrating delay using timer specific routine.. 3620.91 BogoMIPS (lpj=7241835)
[ 15.316324] Security Framework v1.0.0 initialized
[ 15.316330] SELinux: Disabled at boot.
[ 15.316345] Mount-cache hash table entries: 512
[ 15.316470] CPU: After generic identify, caps: 078bfbff ebd3fbff 00000000 00000000 00002001 00000000 00000019
[ 15.316479] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 15.316482] CPU: L2 Cache: 256K (64 bytes/line)
[ 15.316485] CPU: After all inits, caps: 078bfbff ebd3fbff 00000000 00000410 00002001 00000000 00000019
[ 15.316495] Compat vDSO mapped to ffffe000.
[ 15.316499] Remapping vsyscall page to ffffe000
[ 15.316509] Checking 'hlt' instruction... OK.
[ 15.332379] SMP alternatives: switching to UP code
[ 15.332557] Freeing SMP alternatives: 11k freed
[ 15.332755] Early unpacking initramfs... done
[ 15.636876] ACPI: Core revision 20060707
[ 15.639235] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 15.643056] CPU0: AMD Sempron(tm) Processor 3400+ stepping 02
[ 15.643072] Total of 1 processors activated (3620.91 BogoMIPS).
[ 15.643205] ENABLING IO-APIC IRQs
[ 15.643386] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 15.787530] Brought up 1 CPUs
[ 15.787732] Booting paravirtualized kernel on bare hardware
[ 15.787783] Time: 0:41:52 Date: 06/09/107
[ 15.787806] NET: Registered protocol family 16
[ 15.787879] EISA bus registered
[ 15.787882] ACPI: bus type pci registered
[ 15.792470] PCI: PCI BIOS revision 3.00 entry at 0xfa7c0, last bus=5
[ 15.792472] PCI: Using configuration type 1
[ 15.792474] Setting up standard PCI resources
[ 15.800841] ACPI: Interpreter enabled
[ 15.800845] ACPI: Using IOAPIC for interrupt routing
[ 15.801540] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 15.801544] PCI: Probing PCI hardware (bus 00)
[ 15.804205] PCI: Transparent bridge - 0000:00:09.0
[ 15.804409] Boot video device is 0000:05:00.0
[ 15.804496] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 15.883070] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 15.885086] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 15.885498] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 15.885908] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 11 *12 14 15)
[ 15.886317] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 15.886727] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 15.887136] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 *12 14 15)
[ 15.887560] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 15.887970] ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 15.888382] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 15.888790] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 15.889199] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 15.889611] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 15.890019] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 15.890440] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 15.890862] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 15.891284] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 15.891758] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 15.892205] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 15.892650] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 15.893096] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 15.893445] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 15.893906] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 15.894367] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 15.894831] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[ 15.895292] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[ 15.895759] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 15.896219] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 15.896678] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 15.897142] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 15.897612] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[ 15.898082] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[ 15.898552] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 15.901397] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 15.901411] pnp: PnP ACPI init
[ 15.908942] pnp: PnP ACPI: found 13 devices
[ 15.908947] PnPBIOS: Disabled by ACPI PNP
[ 15.908993] PCI: Using ACPI for IRQ routing
[ 15.908998] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 15.974236] NET: Registered protocol family 8
[ 15.974237] NET: Registered protocol family 20
[ 15.974711] pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
[ 15.974714] pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
[ 15.974717] pnp: 00:01: ioport range 0x4400-0x447f has been reserved
[ 15.974720] pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved
[ 15.974722] pnp: 00:01: ioport range 0x4800-0x487f has been reserved
[ 15.974725] pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
[ 15.974957] PCI: Bridge: 0000:00:09.0
[ 15.974959] IO window: d000-dfff
[ 15.974963] MEM window: fe900000-fe9fffff
[ 15.974965] PREFETCH window: fea00000-feafffff
[ 15.974968] PCI: Bridge: 0000:00:0b.0
[ 15.974970] IO window: c000-cfff
[ 15.974973] MEM window: fe800000-fe8fffff
[ 15.974976] PREFETCH window: fe700000-fe7fffff
[ 15.974978] PCI: Bridge: 0000:00:0c.0
[ 15.974980] IO window: b000-bfff
[ 15.974983] MEM window: fe600000-fe6fffff
[ 15.974986] PREFETCH window: fe500000-fe5fffff
[ 15.974988] PCI: Bridge: 0000:00:0d.0
[ 15.974990] IO window: a000-afff
[ 15.974993] MEM window: fe400000-fe4fffff
[ 15.974996] PREFETCH window: fe300000-fe3fffff
[ 15.975001] PCI: Bridge: 0000:00:0e.0
[ 15.975003] IO window: 9000-9fff
[ 15.975006] MEM window: fe200000-fe2fffff
[ 15.975008] PREFETCH window: d8000000-dfffffff
[ 15.975016] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 15.975024] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 15.975030] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 15.975036] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 15.975042] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 15.975065] NET: Registered protocol family 2
[ 16.011194] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 16.011335] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 16.012279] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 16.012769] TCP: Hash tables configured (established 131072 bind 65536)
[ 16.012773] TCP reno registered
[ 16.023230] checking if image is initramfs... it is
[ 16.624393] Freeing initrd memory: 6775k freed
[ 16.624750] audit: initializing netlink socket (disabled)
[ 16.624761] audit(1183941712.496:1): initialized
[ 16.624814] highmem bounce pool size: 64 pages
[ 16.624871] VFS: Disk quotas dquot_6.5.1
[ 16.624888] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 16.624933] io scheduler noop registered
[ 16.624936] io scheduler anticipatory registered
[ 16.624938] io scheduler deadline registered
[ 16.624947] io scheduler cfq registered (default)
[ 16.624975] PCI: Found disabled HT MSI Mapping on 0000:00:0b.0
[ 16.624982] PCI: Found enabled HT MSI Mapping on 0000:00:00.0
[ 16.624988] PCI: Found disabled HT MSI Mapping on 0000:00:0c.0
[ 16.624995] PCI: Found enabled HT MSI Mapping on 0000:00:00.0
[ 16.625001] PCI: Found disabled HT MSI Mapping on 0000:00:0d.0
[ 16.625008] PCI: Found enabled HT MSI Mapping on 0000:00:00.0
[ 16.625013] PCI: Found disabled HT MSI Mapping on 0000:00:0e.0
[ 16.625020] PCI: Found enabled HT MSI Mapping on 0000:00:00.0
[ 16.625169] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 16.625187] assign_interrupt_mode Found MSI capability
[ 16.625190] Allocate Port Service[0000:00:0b.0:pcie00]
[ 16.625249] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 16.625268] assign_interrupt_mode Found MSI capability
[ 16.625270] Allocate Port Service[0000:00:0c.0:pcie00]
[ 16.625326] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 16.625344] assign_interrupt_mode Found MSI capability
[ 16.625347] Allocate Port Service[0000:00:0d.0:pcie00]
[ 16.625399] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 16.625418] assign_interrupt_mode Found MSI capability
[ 16.625420] Allocate Port Service[0000:00:0e.0:pcie00]
[ 16.625515] isapnp: Scanning for PnP cards...
[ 16.977557] isapnp: No Plug & Play device found
[ 17.004381] Real Time Clock Driver v1.12ac
[ 17.004425] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 17.004521] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 17.005241] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 17.005502] mice: PS/2 mouse device common for all mice
[ 17.005903] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 17.006087] input: Macintosh mouse button emulation as /class/input/input0
[ 17.006113] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 17.006117] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 17.006256] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 17.006259] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 17.257455] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 17.257578] EISA: Probing bus 0 at eisa.0
[ 17.257591] Cannot allocate resource for EISA slot 4
[ 17.257602] EISA: Detected 0 cards.
[ 17.287632] TCP cubic registered
[ 17.287639] NET: Registered protocol family 1
[ 17.287658] Using IPI No-Shortcut mode
[ 17.287712] ACPI: (supports S0 S1 S4 S5)
[ 17.287758] Magic number: 15:808:657
[ 17.288079] Freeing unused kernel memory: 328k freed
[ 17.289001] Time: tsc clocksource has been installed.
[ 17.302004] input: AT Translated Set 2 keyboard as /class/input/input1
[ 18.525823] Capability LSM initialized
[ 18.563744] ACPI: Fan [FAN] (on)
[ 18.567089] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 18.568416] ACPI: Thermal Zone [THRM] (40 C)
[ 19.109620] usbcore: registered new interface driver usbfs
[ 19.109645] usbcore: registered new interface driver hub
[ 19.109664] usbcore: registered new device driver usb
[ 19.110904] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
[ 19.110914] ACPI: PCI Interrupt 0000:00:02.1 -> Link [APCL] -> GSI 23 (level, low) -> IRQ 16
[ 19.110925] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 19.110928] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 19.111043] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 19.111071] ehci_hcd 0000:00:02.1: debug port 1
[ 19.111075] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 19.111086] ehci_hcd 0000:00:02.1: irq 16, io mem 0xfeb00000
[ 19.111092] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 19.111176] usb usb1: configuration #1 chosen from 1 choice
[ 19.111197] hub 1-0:1.0: USB hub found
[ 19.111204] hub 1-0:1.0: 10 ports detected
[ 19.130484] SCSI subsystem initialized
[ 19.134900] libata version 2.20 loaded.
[ 19.208704] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 19.225652] ieee1394: Initialized config rom entry `ip1394'
[ 19.227081] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 19.227092] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 17
[ 19.279820] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[fe9ff000-fe9ff7ff] Max Packet=[2] IR/IT contexts=[4/8]
[ 19.286778] ohci1394: fw-host0: Serial EEPROM has suspicious values, attempting to setting max_packet_size to 512 bytes
[ 19.289957] sata_nv 0000:00:07.0: version 3.3
[ 19.290454] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22
[ 19.290463] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ 18
[ 19.290473] sata_nv 0000:00:07.0: Using ADMA mode
[ 19.290484] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 19.301442] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
[ 19.315133] ata1: SATA max UDMA/133 cmd 0xf8826480 ctl 0xf88264a0 bmdma 0x0001f600 irq 18
[ 19.315192] ata2: SATA max UDMA/133 cmd 0xf8826580 ctl 0xf88265a0 bmdma 0x0001f608 irq 18
[ 19.315203] scsi0 : sata_nv
[ 19.408949] Floppy drive(s): fd0 is 1.44M
[ 19.453745] FDC 0 is a post-1991 82077
[ 19.485415] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 19.618418] usb 1-3: configuration #1 chosen from 1 choice
[ 19.618627] hub 1-3:1.0: USB hub found
[ 19.618981] hub 1-3:1.0: 4 ports detected
[ 19.625175] ata1: SATA link down (SStatus 0 SControl 300)
[ 19.625190] scsi1 : sata_nv
[ 19.936647] ata2: SATA link down (SStatus 0 SControl 300)
[ 19.937487] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21
[ 19.937496] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 21 (level, low) -> IRQ 19
[ 19.937506] sata_nv 0000:00:08.0: Using ADMA mode
[ 19.937520] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 19.937580] ata3: SATA max UDMA/133 cmd 0xf8910480 ctl 0xf89104a0 bmdma 0x0001f100 irq 19
[ 19.937621] ata4: SATA max UDMA/133 cmd 0xf8910580 ctl 0xf89105a0 bmdma 0x0001f108 irq 19
[ 19.937634] scsi2 : sata_nv
[ 20.248134] ata3: SATA link down (SStatus 0 SControl 300)
[ 20.248151] scsi3 : sata_nv
[ 20.555752] ieee1394: Host added: ID:BUS[0-00:1023] GUID[4d5a900003000000]
[ 20.715387] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 20.724426] ata4.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
[ 20.724431] ata4.00: ATA-7: Maxtor 6V160E0, VA111630, max UDMA/133
[ 20.724434] ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 20.732394] ata4.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
[ 20.732398] ata4.00: configured for UDMA/133
[ 20.732694] scsi 3:0:0:0: Direct-Access ATA Maxtor 6V160E0 VA11 PQ: 0 ANSI: 5
[ 20.732701] ata4: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 20.737549] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
[ 20.737569] NFORCE-CK804: chipset revision 242
[ 20.737571] NFORCE-CK804: not 100% native mode: will probe irqs later
[ 20.737577] NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
[ 20.737584] ide0: BM-DMA at 0xfb00-0xfb07, BIOS settings: hda:DMA, hdb:DMA
[ 20.737594] ide1: BM-DMA at 0xfb08-0xfb0f, BIOS settings: hdc:DMA, hdd:DMA
[ 20.737601] Probing IDE interface ide0...
[ 21.470186] hda: HL-DT-ST DVDRAM GSA-H10A, ATAPI CD/DVD-ROM drive
[ 21.806768] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 21.809923] Probing IDE interface ide1...
[ 22.377949] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[ 22.377960] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 20 (level, low) -> IRQ 20
[ 22.377971] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 22.377975] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 22.378163] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 22.378179] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfebff000
[ 22.435548] usb usb2: configuration #1 chosen from 1 choice
[ 22.435704] hub 2-0:1.0: USB hub found
[ 22.435715] hub 2-0:1.0: 10 ports detected
[ 22.537973] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 22.537979] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 16
[ 22.537985] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 22.537992] forcedeth: using HIGHDMA
[ 22.839850] usb 2-4: new low speed USB device using ohci_hcd and address 2
[ 23.051537] usb 2-4: configuration #1 chosen from 1 choice
[ 23.066517] usbcore: registered new interface driver hiddev
[ 23.067893] eth0: forcedeth.c: subsystem: 01565:2501 bound to 0000:00:0a.0
[ 23.083555] input: USB_PS2 Optical Mouse as /class/input/input2
[ 23.083575] input: USB HID v1.10 Mouse [USB_PS2 Optical Mouse] on usb-0000:00:02.0-4
[ 23.083588] usbcore: registered new interface driver usbhid
[ 23.083591] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 23.089540] hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 23.089548] Uniform CD-ROM driver Revision: 3.20
[ 23.113930] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[ 23.113956] sda: Write Protect is off
[ 23.113959] sda: Mode Sense: 00 3a 00 00
[ 23.113971] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.114026] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[ 23.114033] sda: Write Protect is off
[ 23.114035] sda: Mode Sense: 00 3a 00 00
[ 23.114045] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.114048] sda: sda1 sda3
[ 23.149840] sd 3:0:0:0: Attached scsi disk sda
[ 23.154456] sd 3:0:0:0: Attached scsi generic sg0 type 0
[ 23.431241] Attempting manual resume
[ 23.431245] swsusp: Resume From Partition 8:5
[ 23.431247] PM: Checking swsusp image.
[ 23.431379] PM: Resume from disk failed.
[ 23.458969] kjournald starting. Commit interval 5 seconds
[ 23.458979] EXT3-fs: mounted filesystem with ordered data mode.
[ 30.985762] NET: Registered protocol family 10
[ 30.985852] lo: Disabled Privacy Extensions
[ 32.510681] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 32.512536] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 32.668375] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[ 32.668403] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[ 33.230626] input: PC Speaker as /class/input/input3
[ 33.344349] parport: PnPBIOS parport detected.
[ 33.344388] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 33.468185] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 33.468190] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 18
[ 33.468212] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 33.785761] intel8x0_measure_ac97_clock: measured 54893 usecs
[ 33.785765] intel8x0: clocking to 46912
[ 33.951421] fuse init (API version 7.Cool
[ 33.983366] lp0: using parport0 (interrupt-driven).
[ 34.026924] ieee1394: raw1394: /dev/raw1394 device initialized
[ 34.044228] video1394: Installed video1394 module
[ 34.062497] WARNING: The dv1394 driver is unsupported and will be removed from Linux soon. Use raw1394 instead.
[ 34.101019] Adding 2594456k swap on /dev/disk/by-uuid/ad120c47-ea26-46e8-8b4b-8d3a0be20aef. Priority:-1 extents:1 across:2594456k
[ 34.247562] EXT3 FS on sda6, internal journal
[ 34.466728] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 34.537397] NTFS volume version 3.1.
[ 35.889339] NET: Registered protocol family 17
[ 39.685540] PPP generic driver version 2.4.2
[ 39.947062] NET: Registered protocol family 24
[ 40.136502] No dock devices found.
[ 40.152281] Using specific hotkey driver
[ 40.229716] ibm_acpi: ec object not found
[ 40.379156] input: Power Button (FF) as /class/input/input4
[ 40.383672] ACPI: Power Button (FF) [PWRF]
[ 40.414767] input: Power Button (CM) as /class/input/input5
[ 40.419271] ACPI: Power Button (CM) [PWRB]
[ 40.450389] input: Sleep Button (CM) as /class/input/input6
[ 40.454920] ACPI: Sleep Button (CM) [SLPB]
[ 40.490173] pcc_acpi: loading...
[ 40.747339] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 40.953701] powernow-k8: Found 1 AMD Sempron(tm) Processor 3400+ processors (version 2.00.00)
[ 40.953733] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x8
[ 40.953735] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12
[ 41.856423] eth0: no IPv6 routers present
[ 44.332953] ppdev: user-space parallel port driver
[ 45.077556] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 45.077561] apm: overridden by ACPI.
[ 45.647714] Bluetooth: Core ver 2.11
[ 45.647771] NET: Registered protocol family 31
[ 45.647773] Bluetooth: HCI device and connection manager initialized
[ 45.647776] Bluetooth: HCI socket layer initialized
[ 45.688827] Bluetooth: L2CAP ver 2.8
[ 45.688831] Bluetooth: L2CAP socket layer initialized
[ 45.750114] Bluetooth: RFCOMM socket layer initialized
[ 45.750128] Bluetooth: RFCOMM TTY layer initialized
[ 45.750130] Bluetooth: RFCOMM ver 1.8
[ 47.195172] Linux agpgart interface v0.102 (c) Dave Jones
[ 47.268058] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 47.273509] [fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes.
[ 47.273860] [fglrx] module loaded - fglrx 8.37.6 [May 25 2007] on minor 0
[ 47.516379] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 47.516391] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 21
[ 50.503588] [fglrx] total GART = 130023424
[ 50.503595] [fglrx] free GART = 114032640
[ 50.503598] [fglrx] max single GART = 114032640
[ 50.503600] [fglrx] total LFB = 134086656
[ 50.503602] [fglrx] free LFB = 90034176
[ 50.503604] [fglrx] max single LFB = 90034176
[ 50.503606] [fglrx] total Inv = 0
[ 50.503608] [fglrx] free Inv = 0
[ 50.503609] [fglrx] max single Inv = 0
[ 50.503611] [fglrx] total TIM = 0
[ 36.904000] Time: acpi_pm clocksource has been installed.
[ 93.672000] ieee1394: The root node is not cycle master capable; selecting a new root node and resetting...
[ 97.316000] ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
[ 97.588000] ieee1394: Node added: ID:BUS[0-00:1023] GUID[00008500011582a0]
[ 97.588000] ieee1394: Node changed: 0-00:1023 -> 0-01:1023
[ 155.420000] ieee1394: Node changed: 0-01:1023 -> 0-00:1023
[ 155.420000] ieee1394: Node suspended: ID:BUS[0-00:1023] GUID[00008500011582a0]
[ 251.384000] ieee1394: The root node is not cycle master capable; selecting a new root node and resetting...
[ 255.032000] ieee1394: Node resumed: ID:BUS[0-00:1023] GUID[00008500011582a0]
[ 255.032000] ieee1394: Node changed: 0-00:1023 -> 0-01:1023
[ 486.368000] ieee1394: Node changed: 0-01:1023 -> 0-00:1023
[ 486.368000] ieee1394: Node suspended: ID:BUS[0-00:1023] GUID[00008500011582a0]
[ 489.532000] ieee1394: The root node is not cycle master capable; selecting a new root node and resetting...
[ 493.176000] ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
[ 493.452000] ieee1394: Node resumed: ID:BUS[0-00:1023] GUID[00008500011582a0]
[ 493.456000] ieee1394: Node changed: 0-00:1023 -> 0-01:1023
[ 1221.752000] ieee1394: Node changed: 0-01:1023 -> 0-00:1023
[ 1221.752000] ieee1394: Node suspended: ID:BUS[0-00:1023] GUID[00008500011582a0]
Ce qualche anima pia che ci capisce qualcosa e saprebbe aiutarmi?
