[Mythtv-Pay-tv] Volevo condividere la mia felicità

[Nede]

Grave!  >:(
Dammi un attimo che cerco qualche info da darti.....

[MrBerny]

Ho provato a risettare l'adapter3 e far partire il frontend:
mi segnala che da questo momento inizierò ad avere un "channel lock" ma a quel punto il frontend diventa inutilizzabile e mi tocca riavviare il pc!

[Nede]

Installa scan:

Codice: Seleziona tutto

sudo apt-get install dvb-apps

Poi, una volta installato il pacchetto aiutati con l'help: scan --help
Importante saranno le opzioni scan -c  & -a (il numero dell'adapter virtuale). Il resto dagli una lettura tu....

[MrBerny]

nel frattempo ti post l'ultimo log del digitale terrestre fino al blocco del pc e riavvio:

Codice: Seleziona tutto

Nov 16 21:07:03.375 CSA: Got command(4): I idx: 0 pid: 0
Nov 16 21:07:09.688 CSA: Got command(5): I idx: 0 pid: 0
Nov 16 21:08:03.033 CSA: Got command(4): I idx: 0 pid: 0
Nov 16 21:08:12.001 CSA: Got command(4): I idx: 0 pid: 0
Nov 16 21:08:48.075 CSA: Got command(4): I idx: 0 pid: 0
Nov 16 21:08:48.165 CSA: Got command(4): I idx: 0 pid: 0
Nov 16 21:08:48.311 CHANNEL: Tuning frontend
Nov 16 21:08:48.357 CHANNEL: Skipping cache reset since tuning matches last tune
Nov 16 21:10:26.135 CSA: Removing csa for rb: 4
Nov 16 21:15:16.466 : Version: 0.0.2-442eee2f550d+
Nov 16 21:15:16.524 CAM: initializing plugin: SoftCam (1.0.0pre-HG-442eee2f550d+): A software emulated CAM
Nov 16 21:15:16.565 CAM(general.info): SC version 1.0.0pre-HG-442eee2f550d+ initializing (VDR 1.6.0)
Nov 16 21:15:16.607 CAM: starting plugin:
Nov 16 21:15:16.649 CAM(general.info): SC version 1.0.0pre-HG-442eee2f550d+ starting (VDR 1.6.0)
Nov 16 21:15:16.691 CAM(core.load): ** Plugin config:
Nov 16 21:15:16.733 CAM(core.load): ** Key updates (AU) are enabled (active CAIDs) (no prestart)
Nov 16 21:15:16.774 CAM(core.load): ** Local systems DON'T take priority over cached remote
Nov 16 21:15:16.833 CAM(core.load): ** Concurrent FF recordings are NOT allowed
Nov 16 21:15:16.901 CAM(core.load): ** Force transfermode with digital audio
Nov 16 21:15:16.959 CAM(core.load): ** ECM cache is set to enabled
Nov 16 21:15:17.026 CAM(core.load): ** TsBufferSize is 4 MB
Nov 16 21:15:17.070 CAM(core.load): ** ScCaps are 1 2 0 0 0 0 0 0 0 0
Nov 16 21:15:17.142 CAM(general.error): failed open /etc/camfiles/Digitale//override.conf: No such file or directory
Nov 16 21:15:17.187 CAM(general.error): failed open /etc/camfiles/Digitale//smartcard.conf: No such file or directory
Nov 16 21:15:17.237 CAM(general.error): failed open /etc/camfiles/Digitale//cardslot.conf: No such file or directory
Nov 16 21:15:17.288 CAM(general.error): failed open /etc/camfiles/Digitale//SoftCam.Key: No such file or directory
Nov 16 21:15:17.338 CAM(general.info): loading cardclient config from /etc/camfiles/Digitale//cardclient.conf
Nov 16 21:15:17.412 CAM(cardclient.newcamd): now using protocol version 525 (cdLen=8)
Nov 16 21:15:17.463 CAM(cardclient.core): hostname=localhost port=34001 emm=1 emmCaids 0000/0000
Nov 16 21:15:17.513 CAM(general.error): init of cardclient 'newcamd' failed
Nov 16 21:15:17.572 CAM(general.error): file /etc/camfiles/Digitale//cardclient.conf has error in line #2
Nov 16 21:15:17.614 CAM(general.error): no keys loaded for softcam!
Nov 16 21:15:17.656 CAM(core.load): ** registered systems:
Nov 16 21:15:17.697 CAM(core.load): ** Viaccess          (pri -10)
Nov 16 21:15:17.739 CAM(core.load): ** Seca              (pri -10)
Nov 16 21:15:17.781 CAM(core.load): ** SC-VideoGuard2    (pri  -5)
Nov 16 21:15:17.823 CAM(core.load): ** SC-Viaccess       (pri  -5)
Nov 16 21:15:17.865 CAM(core.load): ** SC-Seca           (pri  -5)
Nov 16 21:15:17.907 CAM(core.load): ** SC-Nagra          (pri  -5)
Nov 16 21:15:17.957 CAM(core.load): ** SC-Irdeto         (pri  -5)
Nov 16 21:15:17.999 CAM(core.load): ** SC-Cryptoworks    (pri  -5)
Nov 16 21:15:18.040 CAM(core.load): ** SC-Conax          (pri  -5)
Nov 16 21:15:18.082 CAM(core.load): ** Fake-NDS          (pri -12)
Nov 16 21:15:18.124 CAM(core.load): ** Nagra2            (pri -10)
Nov 16 21:15:18.166 CAM(core.load): ** Nagra             (pri -10)
Nov 16 21:15:18.208 CAM(core.load): ** Irdeto2           (pri  -8)
Nov 16 21:15:18.250 CAM(core.load): ** Irdeto            (pri -10)
Nov 16 21:15:18.291 CAM(core.load): ** Cryptoworks       (pri -10)
Nov 16 21:15:18.333 CAM(core.load): ** ConstCW           (pri -20)
Nov 16 21:15:18.375 CAM(core.load): ** Conax             (pri -10)
Nov 16 21:15:18.417 CAM(core.load): ** Cardclient        (pri -15)
Nov 16 21:15:19.473 dvr: Starting thread on /dev/dvb/adapter4/dvr1
The thread scheduling parameters indicate:
policy = 1
priority = 99
Nov 16 21:15:19.477 demux: Starting thread on /dev/dvb/adapter4/demux1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Nov 16 21:15:19.477 frontend: Starting thread on /dev/dvb/adapter4/frontend1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Nov 16 21:15:20.620 dvr: Starting thread on /dev/dvb/adapter5/dvr1
The thread scheduling parameters indicate:
policy = 1
priority = 99
Nov 16 21:15:20.621 demux: Starting thread on /dev/dvb/adapter5/demux1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Nov 16 21:15:20.621 frontend: Starting thread on /dev/dvb/adapter5/frontend1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Nov 16 21:15:20.759 : Listening on port 5456
Nov 16 21:16:07.805 CSA: Got command(4): I idx: 0 pid: 0
Nov 16 21:16:07.895 CSA: Got command(4): I idx: 0 pid: 0
Nov 16 21:16:08.092 CHANNEL: Tuning frontend
Nov 16 21:16:08.129 CSA: Got command(4): I idx: 0 pid: 0

[Nede]

Mmm, sasc-ng è a posto....  >:( Il log è come il mio...
Fammi dare un'occhiata al log del backend di mythtv (lo trovi in /var/log/mythtv/mythbackend.log)

[MrBerny]

Sicuramente sbaglio qualcosa nel fare lo scan:

Codice: Seleziona tutto

server@server:/etc/init.d$ scan -c
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
dumping lists (0 services)
Done.
server@server:/etc/init.d$ scan -c -a 3 -f 0
using '/dev/dvb/adapter3/frontend0' and '/dev/dvb/adapter3/demux0'
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
dumping lists (0 services)
Done.

[Nede]

stoppato il backend prima di usare scan?

Codice: Seleziona tutto

sudo /etc/init.d/mythtv-backend stop

[MrBerny]

Fammi dare un'occhiata al log del backend di mythtv (lo trovi in /var/log/mythtv/mythbackend.log)

Codice: Seleziona tutto

2011-11-16 21:13:50.332 mythbackend version: fixes/0.24 [v0.24.1-80-g1de0431] www.mythtv.org
2011-11-16 21:13:50.626 Using runtime prefix = /usr
2011-11-16 21:13:50.698 Using configuration directory = /home/mythtv/.mythtv
2011-11-16 21:13:51.063 Empty LocalHostName.
2011-11-16 21:13:51.191 Using localhost value of server
2011-11-16 21:13:51.375 Testing network connectivity to '192.168.0.11'
2011-11-16 21:13:51.567 New DB connection, total: 1
2011-11-16 21:13:51.852 Connected to database 'mythconverg' at host: 192.168.0.11
2011-11-16 21:13:52.075 Closing DB connection named 'DBManager0'
2011-11-16 21:13:52.261 Connected to database 'mythconverg' at host: 192.168.0.11
2011-11-16 21:13:52.687 Current locale it_IT
2011-11-16 21:13:52.852 No locale defaults file for it_IT, skipping
2011-11-16 21:13:53.004 Current MythTV Schema Version (DBSchemaVer): 1264
2011-11-16 21:13:53.180 ThreadPool:HTTP: Initial 1, Max 25, Timeout 60000
2011-11-16 21:13:53.249 MediaServer:: Loopback address specified - 127.0.0.1. Disabling UPnP
2011-11-16 21:13:53.355 MythBackend: Starting up as the master server.
2011-11-16 21:13:53.573 New DB connection, total: 2
2011-11-16 21:13:53.796 Connected to database 'mythconverg' at host: 192.168.0.11
2011-11-16 21:13:54.006 DVBChan(33:/dev/dvb/adapter4/frontend0) Warning: Opening DVB frontend device failed.
			eno: No such file or directory (2)
2011-11-16 21:13:54.095 DVBChan(33:/dev/dvb/adapter4/frontend0) Error: Failed to open DVB frontend device due to fatal error or too many attempts.
2011-11-16 21:13:54.293 DVBChan(34:/dev/dvb/adapter4/frontend0) Warning: Opening DVB frontend device failed.
			eno: No such file or directory (2)
2011-11-16 21:13:54.398 DVBChan(34:/dev/dvb/adapter4/frontend0) Error: Failed to open DVB frontend device due to fatal error or too many attempts.
2011-11-16 21:13:54.557 MythBackend, Warning: No valid capture cards are defined in the database.
2011-11-16 21:13:54.642 New DB scheduler connection
2011-11-16 21:13:54.758 Connected to database 'mythconverg' at host: 192.168.0.11
2011-11-16 21:13:54.863 Scheduler, Warning: Listings source 'Digitale Terrestre 2' is defined, but is not attached to a card input.
2011-11-16 21:13:56.224 Main::Registering HttpStatus Extension
2011-11-16 21:13:56.443 Enabled verbose msgs:  important general
2011-11-16 21:13:56.592 AutoExpire: CalcParams(): Max required Free Space: 1.0 GB w/freq: 15 min
2011-11-16 21:13:59.181 Reschedule requested for id -1.
2011-11-16 21:13:59.339 Scheduled 0 items in 0.2 = 0.10 match + 0.06 place
2011-11-16 21:13:59.395 Seem to be woken up by USER
2011-11-16 21:16:06.505 mythbackend version: fixes/0.24 [v0.24.1-80-g1de0431] www.mythtv.org
2011-11-16 21:16:06.548 Using runtime prefix = /usr
2011-11-16 21:16:06.599 Using configuration directory = /home/mythtv/.mythtv
2011-11-16 21:16:06.650 Empty LocalHostName.
2011-11-16 21:16:06.699 Using localhost value of server
2011-11-16 21:16:06.750 Testing network connectivity to '192.168.0.11'
2011-11-16 21:16:06.919 New DB connection, total: 1
2011-11-16 21:16:07.027 Connected to database 'mythconverg' at host: 192.168.0.11
2011-11-16 21:16:07.088 Closing DB connection named 'DBManager0'
2011-11-16 21:16:07.205 Connected to database 'mythconverg' at host: 192.168.0.11
2011-11-16 21:16:07.260 Current locale it_IT
2011-11-16 21:16:07.317 No locale defaults file for it_IT, skipping
2011-11-16 21:16:07.379 Current MythTV Schema Version (DBSchemaVer): 1264
2011-11-16 21:16:07.440 ThreadPool:HTTP: Initial 1, Max 25, Timeout 60000
2011-11-16 21:16:07.507 MediaServer:: Loopback address specified - 127.0.0.1. Disabling UPnP
2011-11-16 21:16:07.562 MythBackend: Starting up as the master server.
2011-11-16 21:16:07.624 New DB connection, total: 2
2011-11-16 21:16:07.720 Connected to database 'mythconverg' at host: 192.168.0.11
2011-11-16 21:16:07.806 New DB connection, total: 3
2011-11-16 21:16:07.998 Connected to database 'mythconverg' at host: 192.168.0.11
2011-11-16 21:16:09.067 New DB scheduler connection
2011-11-16 21:16:09.170 Connected to database 'mythconverg' at host: 192.168.0.11
2011-11-16 21:16:09.230 Scheduler, Warning: Listings source 'Digitale Terrestre 2' is defined, but is not attached to a card input.
2011-11-16 21:16:09.313 Main::Registering HttpStatus Extension
2011-11-16 21:16:09.396 Enabled verbose msgs:  important general
2011-11-16 21:16:09.461 AutoExpire: CalcParams(): Max required Free Space: 1.0 GB w/freq: 15 min
2011-11-16 21:16:12.316 Reschedule requested for id -1.
2011-11-16 21:16:12.445 Scheduled 0 items in 0.1 = 0.06 match + 0.07 place
2011-11-16 21:16:12.501 Seem to be woken up by USER
2011-11-16 21:17:03.051 MainServer::ANN Monitor
2011-11-16 21:17:03.121 adding: server as a client (events: 2)
2011-11-16 21:17:29.021 AutoExpire: CalcParams(): Max required Free Space: 1.0 GB w/freq: 15 min

[MrBerny]

stoppato il backend prima di usare scan?

sisi... stoppato e quello è il risultato!

[Nede]

Il comando scan ho provato da me funziona quindi è scritto bene.
Curiosità: se fai scan -c -a 0, poi 1, poi 2 -3-4-5? Mi posti i risultati?

[MrBerny]

Nede purtroppo devo uscire di corsa! domani posto e ti faccio sapere!! :'(

[Nede]

Hai un pm!!! Buona serata! Divertiti e speriamo che la notte porti bene!

[MrBerny]

Buongiorno!!! sperando sia un buon giorno! :P
Visto che scan non mi dava segnali confortanti, ho provato con w_scan: (posto solo una parte del risultato)

Codice: Seleziona tutto

w_scan version 20110616 (compiled for DVB API 5.3)
guessing country 'IT', use -c <country> to override
using settings for ITALY
DVB aerial
DVB-T Europe
frontend_type DVB-T, channellist 4
output format vdr-1.6
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
	/dev/dvb/adapter0/frontend0 -> DVB-S "STB0899 Multistandard": specified was DVB-T -> SEARCH NEXT ONE.
	/dev/dvb/adapter1/frontend0 -> DVB-T "DiBcom 7000PC": good :-)
	/dev/dvb/adapter2/frontend0 -> DVB-T "DiBcom 7000PC": good :-)
	/dev/dvb/adapter3/frontend0 -> DVB-S "STB0899 Multistandard": specified was DVB-T -> SEARCH NEXT ONE.
	/dev/dvb/adapter4/frontend0 -> DVB-T "DiBcom 7000PC": good :-)
	/dev/dvb/adapter5/frontend0 -> DVB-T "DiBcom 7000PC": good :-)
Using DVB-T frontend (adapter /dev/dvb/adapter1/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_ 
Using DVB API 5.3
frontend 'DiBcom 7000PC' supports
INVERSION_AUTO
QAM_AUTO
TRANSMISSION_MODE_AUTO
GUARD_INTERVAL_AUTO
HIERARCHY_AUTO
FEC_AUTO
FREQ (45.00MHz ... 860.00MHz)
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ 
Scanning 7MHz frequencies...
177500: (time: 00:00) 
184500: (time: 00:03) 
191500: (time: 00:06) (time: 00:07) signal ok:
	QAM_AUTO f = 191500 kHz I999B7C999D999T999G999Y999
Info: NIT(actual) filter timeout
198500: (time: 00:22) 
205500: (time: 00:25) 
212500: (time: 00:28) 
219500: (time: 00:31) 
226500: (time: 00:34) 
Scanning 8MHz frequencies...
474000: (time: 00:37) (time: 00:38) signal ok:
	QAM_AUTO f = 474000 kHz I999B8C999D999T999G999Y999
482000: (time: 00:52) (time: 00:53) signal ok:
	QAM_AUTO f = 482000 kHz I999B8C999D999T999G999Y999
Info: NIT(actual) filter timeout
490000: (time: 01:08) 
498000: (time: 01:11) (time: 01:12) signal ok:
	QAM_AUTO f = 498000 kHz I999B8C999D999T999G999Y999
Info: NIT(actual) filter timeout
506000: (time: 01:27) 
514000: (time: 01:30) (time: 01:31) signal ok:
	QAM_AUTO f = 514000 kHz I999B8C999D999T999G999Y999
Info: NIT(actual) filter timeout
522000: (time: 01:45) (time: 01:46) signal ok:
	QAM_AUTO f = 522000 kHz I999B8C999D999T999G999Y999
	updating transponder:
	   (QAM_AUTO f = 498000 kHz I999B8C999D999T999G999Y999)
	to (QAM_64   f = 498000 kHz I999B8C34D0T8G4Y0)
530000: (time: 02:00) 
538000: (time: 02:03) 
546000: (time: 02:06) (time: 02:07) signal ok:
	QAM_AUTO f = 546000 kHz I999B8C999D999T999G999Y999
	new transponder:
	   (QAM_64   f = 500000 kHz I999B8C23D0T8G4Y0)
554000: (time: 02:21) (time: 02:22) signal ok:
	QAM_AUTO f = 554000 kHz I999B8C999D999T999G999Y999
Info: NIT(actual) filter timeout
562000: (time: 02:37) (time: 02:38) signal ok:
	QAM_AUTO f = 562000 kHz I999B8C999D999T999G999Y999
570000: (time: 02:52) 
578000: (time: 02:55) (time: 02:56) signal ok:
	QAM_AUTO f = 578000 kHz I999B8C999D999T999G999Y999
Info: NIT(actual) filter timeout
586000: (time: 03:11) (time: 03:12) signal ok:
	QAM_AUTO f = 586000 kHz I999B8C999D999T999G999Y999
Info: NIT(actual) filter timeout
594000: (time: 03:26) 
602000: (time: 03:29) 
610000: (time: 03:32) 
618000: (time: 03:36) (time: 03:37) signal ok:
	QAM_AUTO f = 618000 kHz I999B8C999D999T999G999Y999
Info: NIT(actual) filter timeout
626000: (time: 03:51) (time: 03:55) 
634000: (time: 03:57) (time: 03:58) signal ok:
	QAM_AUTO f = 634000 kHz I999B8C999D999T999G999Y999
	new transponder:
	   (QAM_64   f = 594000 kHz I999B8C56D0T8G4Y0)
642000: (time: 04:11) 
650000: (time: 04:15) 
658000: (time: 04:18) 
666000: (time: 04:21) 
674000: (time: 04:24) (time: 04:25) signal ok:

Sembra riconoscere correttamente le due schede e anche gli adapter virtuali sembrano corretti!

[MrBerny]

se eseguo:

Codice: Seleziona tutto

w_scan -a /dev/dvb/adapter5/frontend0

non mi trova nessun canale... >:(

Codice: Seleziona tutto

w_scan version 20110616 (compiled for DVB API 5.3)
guessing country 'IT', use -c <country> to override
using settings for ITALY
DVB aerial
DVB-T Europe
frontend_type DVB-T, channellist 4
output format vdr-1.6
output charset 'UTF-8', use -C <charset> to override
-_-_-_-_ Getting frontend capabilities-_-_-_-_ 
Using DVB API 5.3
frontend 'DiBcom 7000PC' supports
INVERSION_AUTO
QAM_AUTO
TRANSMISSION_MODE_AUTO
GUARD_INTERVAL_AUTO
HIERARCHY_AUTO
FEC_AUTO
FREQ (45.00MHz ... 860.00MHz)
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ 
Scanning 7MHz frequencies...
177500: (time: 00:00) 
184500: (time: 00:03) 
191500: (time: 00:06) (time: 00:07) signal ok:
	QAM_AUTO f = 191500 kHz I999B7C999D999T999G999Y999
Info: NIT(actual) filter timeout
198500: (time: 00:22) 
205500: (time: 00:25) 
212500: (time: 00:28) 
219500: (time: 00:31) 
226500: (time: 00:34) 
Scanning 8MHz frequencies...

.....

Codice: Seleziona tutto

Info: NIT(actual) filter timeout
tune to: QAM_AUTO f = 746000 kHz I999B8C999D999T999G999Y999 
(time: 19:43) Info: NIT(actual) filter timeout
Info: PAT filter timeout
Info: SDT(actual) filter timeout
tune to: QAM_AUTO f = 754000 kHz I999B8C999D999T999G999Y999 
(time: 19:58) Info: PAT filter timeout
Info: SDT(actual) filter timeout
Info: NIT(actual) filter timeout
tune to: QAM_AUTO f = 786000 kHz I999B8C999D999T999G999Y999 
(time: 20:13) Info: PAT filter timeout
Info: NIT(actual) filter timeout
Info: SDT(actual) filter timeout
tune to: QAM_AUTO f = 794000 kHz I999B8C999D999T999G999Y999 
(time: 20:41) Info: PAT filter timeout
Info: SDT(actual) filter timeout
Info: NIT(actual) filter timeout
dumping lists (0 services)
Done.

[Alien321]

Scusate l'intromissione ma avrei una domanda, sapete se esiste una scheda
TV Ibrida (DVB-S+DVB-T) PCIexpress funzionante su Linux??

[MrBerny]

Scusate l'intromissione ma avrei una domanda, sapete se esiste una scheda
TV Ibrida (DVB-S+DVB-T) PCIexpress funzionante su Linux??

Ciao!
Guarda io non ti sò rispondere... dovresti aspettare stasera che sicuramente c'è Nede online e lui ti può dare una risposta precisa!

[MrBerny]

Niente da fare!  :'(
Ho provato a fare una nuova pulita installazione sul server "vecchio" (dove è montata solo la scheda del digitale terrestre) stando attento a non sbagliare nessun punto della guida... situazione finale ancor peggiore:

Gli adapter li crea correttamente (in questo caso sono 2 fisici e 2 virtuali) ma una volta completata la guida passo passo, quando entro nel setup del server e tento di configurare il "video source" mettendo l'adapter virtuale... si blocca il pc.
Nell'altro server almeno arrivavo alla scansione dei canali che non riusciva e poi si inchiodava.
Qui non ci arrivo nemmeno! >:(

Credo proprio che ci siano problemi con sasc-ng.

Mi stavo anche chiedendo.. è normale che:
nella cartella "/usr/src" mi trovo:

Codice: Seleziona tutto

linux-headers-3.0.0-12
linux-headers-3.0.0-12-generic
linux-headers-3.0.4_3.0.4-10.00.Custom_i386.deb
linux-image-3.0.4_3.0.4-10.00.Custom_i386.deb
linux-source-3.0.0
linux-source-3.0.0.tar.bz2

Aspetto info...  :'(

[Nede]

Buonasera a tutti!
X Alien321: Non ho esperienze dirette, ho solo schede PCI normali! Ti potrei consigliare di guardare qui: http://www.linuxtv.org/wiki/index.php/Hardware_Device_Information
X MrBerny: Che dire....  >:(
Tiro su una macchina virtuale usando mythbuntu e vediamo che succede....sasc-ng se funziona a me deve funzionare anche a te....
Mi posti il risultato di uname -r?

[MrBerny]

Buonasera Nede! 
Le ultime news:

1) sul server "vecchio" che gestiva il mio sistema di tv in casa stò reinstallando la 10.10 in modo da far rifunzionare i clients che anche loro montano la 10.10.

2) sull'altro server "nuovo" quello che monta sia la scheda terrestre che satellitare... sono sempre fermo!

Tra qualche minuto ti posto quello che volevi ma per poterlo fare devo disconnettere il server "vecchio" e connettere il "nuovo" visto che insieme mi fanno solo danni! (il tempo di completare gli aggiornamenti sul vecchio)

[MrBerny]

uname -r:

Codice: Seleziona tutto

uname -r
3.0.4

Tra le varie cose, in questo momento il server "nuovo" monta solo la scheda per il digitale terrestre... ho tolto quella satellitare (stando attento a settare per bene gli adapter)