Codice: Seleziona tutto
[ 0.431814] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfc404800
[ 0.440017] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.440041] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.440044] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.440047] usb usb1: Product: EHCI Host Controller
[ 0.440049] usb usb1: Manufacturer: Linux 3.5.0-27-generic ehci_hcd
[ 0.440052] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.440162] hub 1-0:1.0: USB hub found
[ 0.440168] hub 1-0:1.0: 4 ports detected
[ 0.440274] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.440278] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.440284] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.440311] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.444191] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.444208] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc404c00
[ 0.456044] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.456076] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.456079] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.456082] usb usb2: Product: EHCI Host Controller
[ 0.456085] usb usb2: Manufacturer: Linux 3.5.0-27-generic ehci_hcd
[ 0.456087] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.456202] hub 2-0:1.0: USB hub found
[ 0.456207] hub 2-0:1.0: 6 ports detected
[ 0.456278] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.456295] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.456318] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.456322] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.456327] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.456354] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820
[ 0.456391] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.456394] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.456397] usb usb3: Product: UHCI Host Controller
[ 0.456399] usb usb3: Manufacturer: Linux 3.5.0-27-generic uhci_hcd
[ 0.456402] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.456490] hub 3-0:1.0: USB hub found
[ 0.456495] hub 3-0:1.0: 2 ports detected
[ 0.456559] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.456563] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.456568] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.456606] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 0.456643] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.456646] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.456648] usb usb4: Product: UHCI Host Controller
[ 0.456650] usb usb4: Manufacturer: Linux 3.5.0-27-generic uhci_hcd
[ 0.456653] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.456738] hub 4-0:1.0: USB hub found
[ 0.456742] hub 4-0:1.0: 2 ports detected
[ 0.456809] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.456813] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.456822] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.456847] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 0.456879] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.456882] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.456885] usb usb5: Product: UHCI Host Controller
[ 0.456887] usb usb5: Manufacturer: Linux 3.5.0-27-generic uhci_hcd
[ 0.456890] usb usb5: SerialNumber: 0000:00:1d.0
[ 0.456972] hub 5-0:1.0: USB hub found
[ 0.456976] hub 5-0:1.0: 2 ports detected
[ 0.457042] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.457046] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.457052] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.457089] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880
[ 0.457156] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.457159] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.457161] usb usb6: Product: UHCI Host Controller
[ 0.457163] usb usb6: Manufacturer: Linux 3.5.0-27-generic uhci_hcd
[ 0.457166] usb usb6: SerialNumber: 0000:00:1d.1
[ 0.457248] hub 6-0:1.0: USB hub found
[ 0.457253] hub 6-0:1.0: 2 ports detected
[ 0.457318] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.457322] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.457328] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.457363] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 0.457395] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.457398] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.457401] usb usb7: Product: UHCI Host Controller
[ 0.457403] usb usb7: Manufacturer: Linux 3.5.0-27-generic uhci_hcd
[ 0.457406] usb usb7: SerialNumber: 0000:00:1d.2
[ 0.457488] hub 7-0:1.0: USB hub found
[ 0.457492] hub 7-0:1.0: 2 ports detected
[ 0.457601] usbcore: registered new interface driver libusual
[ 0.457639] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.479755] i8042: Detected active multiplexing controller, rev 1.1
[ 0.493293] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.493299] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.493328] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.493348] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.493371] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.493484] mousedev: PS/2 mouse device common for all mice
[ 0.494842] rtc_cmos 00:09: RTC can wake from S4
[ 0.494996] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[ 0.495029] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.495100] device-mapper: uevent: version 1.0.3
[ 0.495167] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.495210] cpuidle: using governor ladder
[ 0.495260] cpuidle: using governor menu
[ 0.495263] EFI Variables Facility v0.08 2004-May-17
[ 0.495502] ashmem: initialized
[ 0.495629] TCP: cubic registered
[ 0.495730] NET: Registered protocol family 10
[ 0.495964] NET: Registered protocol family 17
[ 0.495976] Key type dns_resolver registered
[ 0.496151] PM: Hibernation image not present or could not be loaded.
[ 0.496173] registered taskstats version 1
[ 0.498837] Key type trusted registered
[ 0.500755] Key type encrypted registered
[ 0.503160] Magic number: 9:700:327
[ 0.503289] rtc_cmos 00:09: setting system clock to 2013-04-17 11:18:00 UTC (1366197480)
[ 0.503766] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.503769] EDD information not available.
[ 0.525256] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.596506] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T40N, JC07, max MWDMA2
[ 0.612375] ata1.00: configured for MWDMA2
[ 0.617943] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T40N JC07 PQ: 0 ANSI: 5
[ 0.622995] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.623000] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.623194] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.623347] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.786425] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 0.947268] usb 1-1: New USB device found, idVendor=0bda, idProduct=0158
[ 0.947275] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 0.947279] usb 1-1: Product: USB2.0-CRW
[ 0.947284] usb 1-1: Manufacturer: Generic
[ 0.947288] usb 1-1: SerialNumber: 20060413092100000
[ 0.950526] Initializing USB Mass Storage driver...
[ 0.950567] usbcore: registered new interface driver usb-storage
[ 0.950569] USB Mass Storage support registered.
[ 0.967823] ACPI: Battery Slot [BAT0] (battery present)
[ 0.969211] Freeing unused kernel memory: 932k freed
[ 0.969503] Write protecting the kernel read-only data: 12288k
[ 0.973654] Freeing unused kernel memory: 1472k freed
[ 0.977206] Freeing unused kernel memory: 1136k freed
[ 0.993680] udevd[98]: starting version 175
[ 1.046529] tg3.c:v3.123 (March 21, 2012)
[ 1.053603] ahci 0000:00:1f.2: version 3.0
[ 1.053676] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.053747] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 1.053751] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[ 1.053757] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.057833] scsi3 : ahci
[ 1.059027] scsi2 : usb-storage 1-1:1.0
[ 1.059104] usbcore: registered new interface driver ums-realtek
[ 1.060062] usb 1-3: new high-speed USB device number 3 using ehci_hcd
[ 1.060098] scsi4 : ahci
[ 1.062384] scsi5 : ahci
[ 1.062518] ata3: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404100 irq 43
[ 1.062522] ata4: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404180 irq 43
[ 1.062525] ata5: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404200 irq 43
[ 1.094634] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95787m) rev b002] (PCI Express) MAC address 00:1d:72:06:c7:b8
[ 1.094640] tg3 0000:02:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 1.094643] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.094646] tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.201022] usb 1-3: New USB device found, idVendor=064e, idProduct=a101
[ 1.201031] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 1.201036] usb 1-3: Product: Acer CrystalEye webcam
[ 1.201041] usb 1-3: Manufacturer: SuYin
[ 1.201045] usb 1-3: SerialNumber: CN0314-OV03-VA-R02.00.00
[ 1.380127] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.380160] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.380195] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.403891] ata3.00: unexpected _GTF length (8)
[ 1.409540] ata3.00: ATA-8: ST500LT012-9WS142, 0001SDM1, max UDMA/133
[ 1.409546] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.410249] ata3.00: unexpected _GTF length (8)
[ 1.455565] ata3.00: configured for UDMA/133
[ 1.455797] scsi 3:0:0:0: Direct-Access ATA ST500LT012-9WS14 0001 PQ: 0 ANSI: 5
[ 1.455951] sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.455954] sd 3:0:0:0: [sda] 4096-byte physical blocks
[ 1.455993] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 1.456031] sd 3:0:0:0: [sda] Write Protect is off
[ 1.456034] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.456056] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.503792] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 1.504400] sd 3:0:0:0: [sda] Attached SCSI disk
[ 1.680041] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[ 1.849905] usb 5-1: New USB device found, idVendor=058f, idProduct=9254
[ 1.849912] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.849917] usb 5-1: Product: Generic USB Hub
[ 1.849921] usb 5-1: Manufacturer: ALCOR
[ 1.852961] hub 5-1:1.0: USB hub found
[ 1.854906] hub 5-1:1.0: 4 ports detected
[ 2.068812] scsi 2:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 2.069631] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.072530] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 2.137920] usb 5-1.1: new full-speed USB device number 3 using uhci_hcd
[ 2.277905] usb 5-1.1: New USB device found, idVendor=046d, idProduct=c52f
[ 2.277911] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.277916] usb 5-1.1: Product: USB Receiver
[ 2.277921] usb 5-1.1: Manufacturer: Logitech
[ 2.288993] usbcore: registered new interface driver usbhid
[ 2.288998] usbhid: USB HID core driver
[ 2.291433] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.0/input/input4
[ 2.291571] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input0
[ 2.295065] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.1/input/input5
[ 2.295242] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input1
[ 2.357922] usb 5-1.4: new full-speed USB device number 4 using uhci_hcd
[ 2.485921] usb 5-1.4: New USB device found, idVendor=045e, idProduct=0745
[ 2.485927] usb 5-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.485932] usb 5-1.4: Product: Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0
[ 2.485937] usb 5-1.4: Manufacturer: Microsoft
[ 2.492299] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.4/5-1.4:1.0/input/input6
[ 2.492368] hid-generic 0003:045E:0745.0003: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:1d.0-1.4/input0
[ 2.499841] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.4/5-1.4:1.1/input/input7
[ 2.499939] hid-generic 0003:045E:0745.0004: input,hidraw3: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:1d.0-1.4/input1
[ 2.525187] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.4/5-1.4:1.2/input/input8
[ 2.525299] hid-generic 0003:045E:0745.0005: input,hiddev0,hidraw4: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:1d.0-1.4/input2
[ 2.681356] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 15.019636] Adding 4182012k swap on /dev/sda6. Priority:-1 extents:1 across:4182012k
[ 15.024808] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.153839] udevd[370]: starting version 175
[ 15.444267] type=1400 audit(1366190295.440:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=502 comm="apparmor_parser"
[ 15.444682] type=1400 audit(1366190295.440:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=502 comm="apparmor_parser"
[ 15.444918] type=1400 audit(1366190295.440:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=502 comm="apparmor_parser"
[ 15.492522] ACPI Warning: 0x0000000000001060-0x000000000000107f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 15.492531] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.492534] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[ 15.492538] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 15.492542] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.492546] ACPI Warning: 0x0000000000001180-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[ 15.492550] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.492552] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 15.493143] lp: driver loaded but no devices found
[ 15.530805] wmi: Mapper loaded
[ 15.595534] microcode: CPU0 sig=0x6fb, pf=0x80, revision=0xb3
[ 15.657736] microcode: CPU1 sig=0x6fb, pf=0x80, revision=0xb3
[ 15.659253] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 15.761533] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 15.832657] cfg80211: Calling CRDA to update world regulatory domain
[ 15.837873] cfg80211: World regulatory domain updated:
[ 15.837878] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 15.837880] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.837883] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 15.837885] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 15.837887] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.837889] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.859877] Linux video capture interface: v2.00
[ 15.865885] [drm] Initialized drm 1.1.0 20060810
[ 16.064184] uvcvideo: Found UVC 1.00 device Acer CrystalEye webcam (064e:a101)
[ 16.066817] input: Acer CrystalEye webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input9
[ 16.066916] usbcore: registered new interface driver uvcvideo
[ 16.066918] USB Video Class driver (1.1.1)
[ 16.152949] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 16.152953] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 16.168836] i915 0000:00:02.0: setting latency timer to 64
[ 16.207140] iwl3945 0000:04:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[ 16.207144] iwl3945 0000:04:00.0: Detected Intel Wireless WiFi Link 3945BG
[ 16.207297] iwl3945 0000:04:00.0: irq 44 for MSI/MSI-X
[ 16.207480] Registered led device: phy0-led
[ 16.207533] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 16.209639] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 16.209674] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 16.209676] [drm] Driver supports precise vblank timestamp query.
[ 16.209722] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 16.257577] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 16.262143] acer_wmi: Function bitmap for Communication Device: 0x17
[ 16.262555] acer_wmi: Brightness must be controlled by acpi video driver
[ 16.263182] input: Acer BMA150 accelerometer as /devices/virtual/input/input10
[ 16.360172] i915: fixme: max PWM is zero
[ 16.396319] [drm] initialized overlay support
[ 16.628666] psmouse serio2: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04711/0xa04000/0x0
[ 16.680756] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input11
[ 16.702843] fbcon: inteldrmfb (fb0) is primary device
[ 16.703031] Console: switching to colour frame buffer device 160x50
[ 16.703065] fb0: inteldrmfb frame buffer device
[ 16.703067] drm: registered panic notifier
[ 16.830454] acpi device:03: registered as cooling_device2
[ 16.830565] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 16.831438] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[ 16.832017] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 16.832144] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 16.955565] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 16.955725] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 17.588044] usb 7-2: new full-speed USB device number 2 using uhci_hcd
[ 17.760066] usb 7-2: New USB device found, idVendor=0a5c, idProduct=2101
[ 17.760072] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 17.760075] usb 7-2: Product: Acer Module
[ 17.760078] usb 7-2: Manufacturer: Broadcom Corp
[ 17.883272] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 18.290645] Bluetooth: Core ver 2.16
[ 18.290669] NET: Registered protocol family 31
[ 18.290671] Bluetooth: HCI device and connection manager initialized
[ 18.290674] Bluetooth: HCI socket layer initialized
[ 18.290676] Bluetooth: L2CAP socket layer initialized
[ 18.290680] Bluetooth: SCO socket layer initialized
[ 18.318386] init: failsafe main process (835) killed by TERM signal
[ 18.355178] usbcore: registered new interface driver btusb
[ 18.462968] type=1400 audit(1366190298.456:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=923 comm="apparmor_parser"
[ 18.463307] type=1400 audit(1366190298.456:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=923 comm="apparmor_parser"
[ 18.466915] type=1400 audit(1366190298.460:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=924 comm="apparmor_parser"
[ 18.467035] type=1400 audit(1366190298.460:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=925 comm="apparmor_parser"
[ 18.467255] type=1400 audit(1366190298.460:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=924 comm="apparmor_parser"
[ 18.467374] type=1400 audit(1366190298.460:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=925 comm="apparmor_parser"
[ 18.469965] type=1400 audit(1366190298.464:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=926 comm="apparmor_parser"
[ 18.472301] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.472304] Bluetooth: BNEP filters: protocol multicast
[ 18.518731] Bluetooth: RFCOMM TTY layer initialized
[ 18.518739] Bluetooth: RFCOMM socket layer initialized
[ 18.518741] Bluetooth: RFCOMM ver 1.11
[ 18.688446] ppdev: user-space parallel port driver
[ 18.795582] tg3 0000:02:00.0: irq 47 for MSI/MSI-X
[ 18.968477] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.969428] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.975412] iwl3945 0000:04:00.0: loaded firmware version 15.32.2.9
[ 19.054687] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.054944] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.092194] init: rc-sysinit main process (857) killed by TERM signal
[ 20.836660] wlan0: authenticate with 00:14:c1:0f:e6:5c
[ 20.839730] wlan0: send auth to 00:14:c1:0f:e6:5c (try 1/3)
[ 20.841646] wlan0: authenticated
[ 20.844027] wlan0: associate with 00:14:c1:0f:e6:5c (try 1/3)
[ 20.846369] wlan0: RX AssocResp from 00:14:c1:0f:e6:5c (capab=0x411 status=0 aid=4)
[ 20.847850] wlan0: associated
[ 20.848379] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 27.176062] usb 1-1: reset high-speed USB device number 2 using ehci_hcd
[ 70.676598] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 70.678077] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 70.678083] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 122.394384] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 122.400069] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 122.400081] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 174.105626] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 174.107110] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 174.107121] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 225.814063] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 225.816086] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 225.816099] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 277.529420] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 277.530892] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 277.530902] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 277.668186] usb 1-1: reset high-speed USB device number 2 using ehci_hcd
[ 329.241203] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 329.242829] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 329.242843] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 380.952803] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 380.954286] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 380.954296] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 432.662349] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 432.664117] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 432.664129] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 484.377504] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 484.379109] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 484.379122] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 536.089902] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 536.091490] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 536.091501] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 587.796610] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 587.798088] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 587.798092] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 639.513514] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 639.515008] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 639.515018] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 691.224783] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 691.226414] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 691.226425] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 742.933968] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 742.935686] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 742.935698] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 794.650106] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 794.652121] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 794.652133] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 846.362240] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 846.366656] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 846.366669] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 846.516092] usb 1-1: reset high-speed USB device number 2 using ehci_hcd
[ 898.074382] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 898.076229] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 898.076242] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 949.785037] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 949.786885] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 949.786899] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1001.498651] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1001.500458] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 1001.500471] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1053.208634] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1053.210118] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 1053.210122] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1053.344143] usb 1-1: reset high-speed USB device number 2 using ehci_hcd
[ 1104.916731] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1104.918228] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 1104.918232] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1156.634072] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1156.636107] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 1156.636119] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1208.346572] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1208.348585] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 1208.348597] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1260.058822] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1260.060623] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 1260.060634] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1311.770717] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1311.772422] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 1311.772432] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1363.477972] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1363.479608] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 1363.479621] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1415.194553] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1415.196046] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 1415.196051] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1466.907491] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1466.909119] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 1466.909130] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1518.617236] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1518.618727] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 1518.618736] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1570.330261] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1570.331883] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 1570.331894] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1622.042279] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1622.044206] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 1622.044222] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1673.748589] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1673.750088] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 1673.750094] sd 2:0:0:0: [sdb] Assuming drive cache: write through
andrea@HOMER-Ubuntu:~$ ^C
andrea@HOMER-Ubuntu:~$
