[RISOLTO] Sincronizzare iPod

[wellish]

Salve a tutti,

vorrei chiedere a qualcuno di voi come si fa a sincronizzare un iPod Apple su Ubuntu 12.04.

Ho il problema che quando lo collego, non viene rilevato.
In pratica il PC non lo "vede".
Altre periferiche USB invece vengono rilevate tranquillamente.

Con Ubuntu 10.04, in precedenza, non ho mai avuto problemi, e ci usavo gtkpod.

[dadexix86]

Se hai iOS7 non ci sono speranze. Apple ha blacklistato Linux.
Finché non cambiano idea puoi gestirlo solo con Windows e un altro sistema apple.

Se non hai iOS7 per favore sii più dettagliato nell'esporre il problema.

[wellish]

Che cosa é iOS7 ?

[wellish]

Mi spiego meglio: posseggo un iPod shuffle nano.

[dadexix86]

È il sistema operativo

Comunque, posta l'output di

Codice: Seleziona tutto

lsusb

quando connesso.

[wellish]

Collegato l'iPod.

Output di lsusb:

Codice: Seleziona tutto

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 003: ID 413c:2111 Dell Computer Corp. 
Bus 002 Device 004: ID 0461:4e22 Primax Electronics, Ltd 
Bus 001 Device 010: ID 05ac:1301 Apple, Inc. iPod Shuffle 2.Gen

[dadexix86]

Prova a lanciare Rhythmbox o Banshee da terminale e vedere se riportano errori in merito (incolla qui l'output del terminale).

[wellish]

Banshee non ce l'ho.

Ho lanciato Rhythmbox da terminale, e non mi dá nessun messaggio di output, né errori di alcun genere.

Come detto sopra, nemmeno Rhythmbox "vede" l'iPod.

[dadexix86]

Prova a disabilitare i plugin di rhythmbox prima di connetterlo (fonte: http://askubuntu.com/questions/185542/d ... -rhythmbox).

Se non funziona, assicurati di aver installato i restricted extras (fonte: http://askubuntu.com/questions/132926/r ... pod-issues).

Se non funziona, assicurati che l'iPod funzioni ancora testandolo su un sistema tra quelli che supporta ufficialmente (Windows o Apple con iTunes) e poi posta qui l'output di

Codice: Seleziona tutto

dmesg

[wellish]

Ho provato a disabilitare e riabilitare i plugin di Rythmbox alternativamente, ma il problema principale é che l'iPod non viene visto dal PC; dal menú RISORSE, insieme a COMPUTER dovrebbe comparirel'iPod, e invece no.

Restricted extras giá installati.

La periferica funziona correttamente (oltretutto continuo a sentire i brani memorizzati dentro.....mi piacerebbe metterne altri, ecco....).

Output di dmesg:

Codice: Seleziona tutto

[    9.158963] Registered led device: ath9k-phy0
[    9.158969] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc9000a200000, irq=17
[    9.186436] input: Dell Dell USB Wired Entry Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input2
[    9.186499] generic-usb 0003:413C:2111.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Wired Entry Keyboard] on usb-0000:00:1d.0-1.5/input0
[    9.191253] input: Dell Dell USB Wired Entry Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input3
[    9.191298] generic-usb 0003:413C:2111.0002: input,hidraw1: USB HID v1.10 Device [Dell Dell USB Wired Entry Keyboard] on usb-0000:00:1d.0-1.5/input1
[    9.192800] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input4
[    9.192912] generic-usb 0003:0461:4E22.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.0-1.6/input0
[    9.192956] usbcore: registered new interface driver usbhid
[    9.192958] usbhid: USB HID core driver
[    9.195318] scsi6 : usb-storage 1-1.4:1.0
[    9.195380] usbcore: registered new interface driver ums-realtek
[    9.353938] init: failsafe main process (903) killed by TERM signal
[    9.383170] usb 1-1.4: USB disconnect, device number 3
[    9.419850] fbcon: inteldrmfb (fb0) is primary device
[    9.419958] Console: switching to colour frame buffer device 128x48
[    9.419972] fb0: inteldrmfb frame buffer device
[    9.419973] drm: registered panic notifier
[    9.433320] acpi device:4a: registered as cooling_device7
[    9.433518] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    9.433548] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    9.433580] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    9.434009] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    9.434022] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    9.434065] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[    9.434087] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    9.676334] Bluetooth: Core ver 2.16
[    9.676349] NET: Registered protocol family 31
[    9.676351] Bluetooth: HCI device and connection manager initialized
[    9.676352] Bluetooth: HCI socket layer initialized
[    9.676353] Bluetooth: L2CAP socket layer initialized
[    9.676379] Bluetooth: SCO socket layer initialized
[    9.677470] ppdev: user-space parallel port driver
[    9.688807] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    9.688809] Bluetooth: BNEP filters: protocol multicast
[    9.695214] type=1400 audit(1390123452.454:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1004 comm="apparmor_parser"
[    9.695528] type=1400 audit(1390123452.454:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1004 comm="apparmor_parser"
[    9.697394] Bluetooth: RFCOMM TTY layer initialized
[    9.697398] Bluetooth: RFCOMM socket layer initialized
[    9.697399] Bluetooth: RFCOMM ver 1.11
[    9.744563] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    9.747903] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    9.869951] r8169 0000:04:00.0: eth0: link down
[    9.870194] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.870398] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.898161] type=1400 audit(1390123452.658:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1041 comm="apparmor_parser"
[    9.898290] type=1400 audit(1390123452.658:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1042 comm="apparmor_parser"
[    9.971564] init: alsa-restore main process (1096) terminated with status 19
[    9.978202] hda_codec: CX20641: BIOS auto-probing.
[    9.986656] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[    9.986912] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    9.987033] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    9.987140] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    9.987241] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    9.987378] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    9.987484] input: HDA Intel PCH Line-Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   10.191913] vboxdrv: Found 2 processor cores.
[   10.192433] vboxdrv: fAsync=0 offMin=0x1c0 offMax=0x788
[   10.192473] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   10.192474] vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000).
[   10.203811] vboxpci: IOMMU not found (not registered)
[   10.353833] [drm:gen6_sanitize_pm] *ERROR* Power management discrepancy: GEN6_RP_INTERRUPT_LIMITS expected 15000000, was 12060000
[   10.375301] init: plymouth-upstart-bridge main process (970) killed by TERM signal
[   10.898504] init: plymouth-stop pre-start process (1484) terminated with status 1
[   32.968249] wlan0: authenticate with 20:2b:c1:ee:73:7f (try 1)
[   32.970212] wlan0: authenticated
[   32.970453] wlan0: associate with 20:2b:c1:ee:73:7f (try 1)
[   32.974473] wlan0: RX AssocResp from 20:2b:c1:ee:73:7f (capab=0x411 status=0 aid=1)
[   32.974476] wlan0: associated
[   32.979323] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   46.670694] [drm:gen6_sanitize_pm] *ERROR* Power management discrepancy: GEN6_RP_INTERRUPT_LIMITS expected 15070000, was 15000000
[  110.710656] [drm:gen6_sanitize_pm] *ERROR* Power management discrepancy: GEN6_RP_INTERRUPT_LIMITS expected 00070000, was 15070000
[ 1075.675906] audit_printk_skb: 57 callbacks suppressed
[ 1075.675908] type=1400 audit(1390124518.509:31): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld-akonadi" pid=6467 comm="apparmor_parser"
[ 1075.676063] type=1400 audit(1390124518.509:32): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=6467 comm="apparmor_parser"
[ 2628.361237] usb 1-1.1: new high-speed USB device number 4 using ehci_hcd
[ 2628.455623] scsi7 : usb-storage 1-1.1:1.0
[ 2629.453890] scsi 7:0:0:0: Direct-Access     Apple    iPod             2.70 PQ: 0 ANSI: 2
[ 2629.454956] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 2629.457672] sd 7:0:0:0: [sdb] 495616 2048-byte logical blocks: (1.01 GB/968 MiB)
[ 2629.458198] sd 7:0:0:0: [sdb] Write Protect is off
[ 2629.458203] sd 7:0:0:0: [sdb] Mode Sense: 64 00 00 08
[ 2629.458826] sd 7:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2629.460198] sd 7:0:0:0: [sdb] 495616 2048-byte logical blocks: (1.01 GB/968 MiB)
[ 2629.468636]  sdb:
[ 2629.469803] sd 7:0:0:0: [sdb] 495616 2048-byte logical blocks: (1.01 GB/968 MiB)
[ 2629.471054] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 2631.042198] FAT-fs (sdb): error, fat_free_clusters: deleting FAT entry beyond EOF
[ 2631.042203] FAT-fs (sdb): Filesystem has been set read-only
[ 2656.913962] usb 1-1.1: USB disconnect, device number 4
[ 9102.093071] wlan0: deauthenticated from 20:2b:c1:ee:73:7f (Reason: 7)
[ 9102.131855] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 9102.131862] cfg80211: Restoring regulatory settings
[ 9102.131866] cfg80211: Calling CRDA to update world regulatory domain
[ 9102.136731] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 9102.136735] cfg80211: World regulatory domain updated:
[ 9102.136737] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9102.136741] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9102.136743] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9102.136746] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9102.136748] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9102.136751] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9103.258724] wlan0: authenticate with 20:2b:c1:ee:73:7f (try 1)
[ 9103.260755] wlan0: authenticated
[ 9103.260966] wlan0: associate with 20:2b:c1:ee:73:7f (try 1)
[ 9103.265076] wlan0: RX ReassocResp from 20:2b:c1:ee:73:7f (capab=0x411 status=0 aid=1)
[ 9103.265079] wlan0: associated
[10790.292838] usb 1-1.1: new full-speed USB device number 5 using ehci_hcd
[10790.389078] input: USB Audio Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.2/input/input12
[10790.389191] generic-usb 0003:0C76:160A.0004: input,hidraw3: USB HID v1.00 Device [USB Audio Device] on usb-0000:00:1a.0-1.1/input2
[10790.456079] usbcore: registered new interface driver snd-usb-audio
[11021.933585] usb 1-1.1: USB disconnect, device number 5
[11159.291592] usb 1-1.2: new full-speed USB device number 6 using ehci_hcd
[11159.391119] input: USB Audio Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/input/input13
[11159.391263] generic-usb 0003:0C76:160A.0005: input,hidraw3: USB HID v1.00 Device [USB Audio Device] on usb-0000:00:1a.0-1.2/input2
[11159.451296] retire_capture_urb: 198 callbacks suppressed
[11224.005974] usb 1-1.2: USB disconnect, device number 6
[11555.474475] usb 1-1.1: new full-speed USB device number 7 using ehci_hcd
[11555.626213] Linux video capture interface: v2.00
[11555.638541] gspca_main: v2.14.0 registered
[11555.645337] gspca_main: zc3xx-2.14.0 probing 0ac8:305b
[11556.703271] input: zc3xx as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/input/input14
[11556.704228] usbcore: registered new interface driver zc3xx
[11821.104492] usb 1-1.2: new high-speed USB device number 8 using ehci_hcd
[11821.198871] scsi8 : usb-storage 1-1.2:1.0
[11822.196959] scsi 8:0:0:0: Direct-Access     PI-239   USB 2.0 Drive    1.08 PQ: 0 ANSI: 4
[11822.197727] sd 8:0:0:0: Attached scsi generic sg2 type 0
[11822.200569] sd 8:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[11822.201185] sd 8:0:0:0: [sdc] Write Protect is off
[11822.201190] sd 8:0:0:0: [sdc] Mode Sense: 23 00 00 00
[11822.201812] sd 8:0:0:0: [sdc] No Caching mode page found
[11822.201816] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[11822.203677] sd 8:0:0:0: [sdc] No Caching mode page found
[11822.203681] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[11822.244370]  sdc: sdc1
[11822.246551] sd 8:0:0:0: [sdc] No Caching mode page found
[11822.246556] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[11822.246559] sd 8:0:0:0: [sdc] Attached SCSI disk
[11823.124234] FAT-fs (sdb): Directory bread(block 2048) failed
[11823.124237] FAT-fs (sdb): Directory bread(block 2049) failed
[11823.124239] FAT-fs (sdb): Directory bread(block 2050) failed
[11823.124240] FAT-fs (sdb): Directory bread(block 2051) failed
[11823.124276] FAT-fs (sdb): Directory bread(block 2048) failed
[11823.124278] FAT-fs (sdb): Directory bread(block 2049) failed
[11823.124280] FAT-fs (sdb): Directory bread(block 2050) failed
[11823.124282] FAT-fs (sdb): Directory bread(block 2051) failed
[11850.091804] usb 1-1.2: USB disconnect, device number 8
[12130.667839] usb 1-1.1: USB disconnect, device number 7
[12878.840236] usb 1-1.1: new full-speed USB device number 9 using ehci_hcd
[12878.934147] gspca_main: zc3xx-2.14.0 probing 0ac8:305b
[12879.988661] input: zc3xx as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/input/input15
[13064.614181] wlan0: deauthenticated from 20:2b:c1:ee:73:7f (Reason: 7)
[13064.676660] cfg80211: All devices are disconnected, going to restore regulatory settings
[13064.676667] cfg80211: Restoring regulatory settings
[13064.676689] cfg80211: Calling CRDA to update world regulatory domain
[13064.681002] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[13064.681006] cfg80211: World regulatory domain updated:
[13064.681008] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[13064.681012] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13064.681014] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[13064.681017] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[13064.681019] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13064.681022] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13065.803269] wlan0: authenticate with 20:2b:c1:ee:73:7f (try 1)
[13065.805444] wlan0: authenticated
[13065.805876] wlan0: associate with 20:2b:c1:ee:73:7f (try 1)
[13065.809891] wlan0: RX ReassocResp from 20:2b:c1:ee:73:7f (capab=0x411 status=0 aid=1)
[13065.809894] wlan0: associated
[13544.617502] wlan0: deauthenticated from 20:2b:c1:ee:73:7f (Reason: 7)
[13544.672303] cfg80211: All devices are disconnected, going to restore regulatory settings
[13544.672310] cfg80211: Restoring regulatory settings
[13544.672313] cfg80211: Calling CRDA to update world regulatory domain
[13544.676474] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[13544.676478] cfg80211: World regulatory domain updated:
[13544.676480] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[13544.676483] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13544.676486] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[13544.676489] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[13544.676491] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13544.676494] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13545.804188] wlan0: authenticate with 20:2b:c1:ee:73:7f (try 1)
[13545.806160] wlan0: authenticated
[13545.806332] wlan0: associate with 20:2b:c1:ee:73:7f (try 1)
[13545.810746] wlan0: RX ReassocResp from 20:2b:c1:ee:73:7f (capab=0x411 status=0 aid=1)
[13545.810748] wlan0: associated
[14504.620692] wlan0: deauthenticated from 20:2b:c1:ee:73:7f (Reason: 7)
[14504.683366] cfg80211: All devices are disconnected, going to restore regulatory settings
[14504.683373] cfg80211: Restoring regulatory settings
[14504.683392] cfg80211: Calling CRDA to update world regulatory domain
[14504.687487] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[14504.687491] cfg80211: World regulatory domain updated:
[14504.687493] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[14504.687496] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[14504.687499] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[14504.687502] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[14504.687504] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[14504.687507] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[14505.817733] wlan0: authenticate with 20:2b:c1:ee:73:7f (try 1)
[14505.819689] wlan0: authenticated
[14505.836754] wlan0: associate with 20:2b:c1:ee:73:7f (try 1)
[14505.840823] wlan0: RX ReassocResp from 20:2b:c1:ee:73:7f (capab=0x411 status=0 aid=1)
[14505.840828] wlan0: associated
[14624.625718] wlan0: deauthenticated from 20:2b:c1:ee:73:7f (Reason: 7)
[14624.708100] cfg80211: All devices are disconnected, going to restore regulatory settings
[14624.708106] cfg80211: Restoring regulatory settings
[14624.708110] cfg80211: Calling CRDA to update world regulatory domain
[14624.712231] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[14624.712235] cfg80211: World regulatory domain updated:
[14624.712237] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[14624.712240] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[14624.712243] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[14624.712246] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[14624.712248] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[14624.712251] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[14625.834429] wlan0: authenticate with 20:2b:c1:ee:73:7f (try 1)
[14625.836947] wlan0: authenticated
[14625.853884] wlan0: associate with 20:2b:c1:ee:73:7f (try 1)
[14625.858280] wlan0: RX ReassocResp from 20:2b:c1:ee:73:7f (capab=0x411 status=0 aid=1)
[14625.858283] wlan0: associated
[14984.624281] wlan0: deauthenticated from 20:2b:c1:ee:73:7f (Reason: 7)
[14984.706759] cfg80211: All devices are disconnected, going to restore regulatory settings
[14984.706766] cfg80211: Restoring regulatory settings
[14984.706770] cfg80211: Calling CRDA to update world regulatory domain
[14984.710954] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[14984.710960] cfg80211: World regulatory domain updated:
[14984.710962] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[14984.710965] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[14984.710967] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[14984.710970] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[14984.710972] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[14984.710975] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[14985.834814] wlan0: authenticate with 20:2b:c1:ee:73:7f (try 1)
[14985.836780] wlan0: authenticated
[14985.836935] wlan0: associate with 20:2b:c1:ee:73:7f (try 1)
[14985.841057] wlan0: RX ReassocResp from 20:2b:c1:ee:73:7f (capab=0x411 status=0 aid=1)
[14985.841060] wlan0: associated
[15703.134087] usb 1-1.1: USB disconnect, device number 9
[16564.755236] usb 1-1.1: new high-speed USB device number 10 using ehci_hcd
[16564.848990] scsi9 : usb-storage 1-1.1:1.0
[16565.847731] scsi 9:0:0:0: Direct-Access     Apple    iPod             2.70 PQ: 0 ANSI: 2
[16565.848893] sd 9:0:0:0: Attached scsi generic sg2 type 0
[16565.851196] sd 9:0:0:0: [sdc] 495616 2048-byte logical blocks: (1.01 GB/968 MiB)
[16565.851684] sd 9:0:0:0: [sdc] Write Protect is off
[16565.851689] sd 9:0:0:0: [sdc] Mode Sense: 64 00 00 08
[16565.852184] sd 9:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[16565.853431] sd 9:0:0:0: [sdc] 495616 2048-byte logical blocks: (1.01 GB/968 MiB)
[16565.862275]  sdc:
[16565.863557] sd 9:0:0:0: [sdc] 495616 2048-byte logical blocks: (1.01 GB/968 MiB)
[16565.864829] sd 9:0:0:0: [sdc] Attached SCSI removable disk
[16567.387186] FAT-fs (sdc): error, fat_free_clusters: deleting FAT entry beyond EOF
[16567.387191] FAT-fs (sdc): Filesystem has been set read-only
[18942.582934] wlan0: deauthenticated from 20:2b:c1:ee:73:7f (Reason: 7)
[18942.611081] cfg80211: All devices are disconnected, going to restore regulatory settings
[18942.611087] cfg80211: Restoring regulatory settings
[18942.611103] cfg80211: Calling CRDA to update world regulatory domain
[18942.615449] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[18942.615454] cfg80211: World regulatory domain updated:
[18942.615456] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[18942.615459] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[18942.615462] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[18942.615464] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[18942.615467] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[18942.615469] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[18943.754588] wlan0: authenticate with 20:2b:c1:ee:73:7f (try 1)
[18943.756625] wlan0: authenticated
[18943.756787] wlan0: associate with 20:2b:c1:ee:73:7f (try 1)
[18943.762269] wlan0: RX ReassocResp from 20:2b:c1:ee:73:7f (capab=0x411 status=0 aid=1)
[18943.762274] wlan0: associated
[19182.582858] wlan0: deauthenticated from 20:2b:c1:ee:73:7f (Reason: 7)
[19182.616843] cfg80211: All devices are disconnected, going to restore regulatory settings
[19182.616850] cfg80211: Restoring regulatory settings
[19182.616854] cfg80211: Calling CRDA to update world regulatory domain
[19182.621146] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[19182.621151] cfg80211: World regulatory domain updated:
[19182.621153] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[19182.621156] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19182.621159] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[19182.621161] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[19182.621164] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19182.621166] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19183.760173] wlan0: authenticate with 20:2b:c1:ee:73:7f (try 1)
[19183.762144] wlan0: authenticated
[19183.762272] wlan0: associate with 20:2b:c1:ee:73:7f (try 1)
[19183.767704] wlan0: RX ReassocResp from 20:2b:c1:ee:73:7f (capab=0x411 status=0 aid=1)
[19183.767707] wlan0: associated
[30790.471212] usb 1-1.1: USB disconnect, device number 10
[30904.236112] usb 1-1.1: new high-speed USB device number 11 using ehci_hcd
[30904.329879] scsi10 : usb-storage 1-1.1:1.0
[30905.328766] scsi 10:0:0:0: Direct-Access     Apple    iPod             2.70 PQ: 0 ANSI: 2
[30905.329845] sd 10:0:0:0: Attached scsi generic sg2 type 0
[30905.331379] sd 10:0:0:0: [sdd] 495616 2048-byte logical blocks: (1.01 GB/968 MiB)
[30905.331985] sd 10:0:0:0: [sdd] Write Protect is off
[30905.331990] sd 10:0:0:0: [sdd] Mode Sense: 64 00 00 08
[30905.332433] sd 10:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[30905.333931] sd 10:0:0:0: [sdd] 495616 2048-byte logical blocks: (1.01 GB/968 MiB)
[30905.339975]  sdd:
[30905.341199] sd 10:0:0:0: [sdd] 495616 2048-byte logical blocks: (1.01 GB/968 MiB)
[30905.342432] sd 10:0:0:0: [sdd] Attached SCSI removable disk
[30906.281948] FAT-fs (sdc): Directory bread(block 2048) failed
[30906.281953] FAT-fs (sdc): Directory bread(block 2049) failed
[30906.281956] FAT-fs (sdc): Directory bread(block 2050) failed
[30906.281958] FAT-fs (sdc): Directory bread(block 2051) failed
[30906.281995] FAT-fs (sdc): Directory bread(block 2048) failed
[30906.281998] FAT-fs (sdc): Directory bread(block 2049) failed
[30906.282000] FAT-fs (sdc): Directory bread(block 2050) failed
[30906.282002] FAT-fs (sdc): Directory bread(block 2051) failed
[30945.254947] usb 1-1.1: USB disconnect, device number 11
[30953.132459] usb 1-1.1: new high-speed USB device number 12 using ehci_hcd
[30953.227559] scsi11 : usb-storage 1-1.1:1.0
[30954.225140] scsi 11:0:0:0: Direct-Access     Apple    iPod             2.70 PQ: 0 ANSI: 2
[30954.226555] sd 11:0:0:0: Attached scsi generic sg2 type 0
[30954.226842] sd 11:0:0:0: [sde] 495616 2048-byte logical blocks: (1.01 GB/968 MiB)
[30954.227592] sd 11:0:0:0: [sde] Write Protect is off
[30954.227602] sd 11:0:0:0: [sde] Mode Sense: 64 00 00 08
[30954.228953] sd 11:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[30954.230438] sd 11:0:0:0: [sde] 495616 2048-byte logical blocks: (1.01 GB/968 MiB)
[30954.234090]  sde:
[30954.236065] sd 11:0:0:0: [sde] 495616 2048-byte logical blocks: (1.01 GB/968 MiB)
[30954.237437] sd 11:0:0:0: [sde] Attached SCSI removable disk
[30955.767400] FAT-fs (sde): error, fat_free_clusters: deleting FAT entry beyond EOF
[30955.767404] FAT-fs (sde): Filesystem has been set read-only
[30990.567088] usb 1-1.1: USB disconnect, device number 12
[31030.092967] usb 1-1.1: new high-speed USB device number 13 using ehci_hcd
[31030.187769] scsi12 : usb-storage 1-1.1:1.0
[31031.185640] scsi 12:0:0:0: Direct-Access     Apple    iPod             2.70 PQ: 0 ANSI: 2
[31031.186532] sd 12:0:0:0: Attached scsi generic sg2 type 0
[31031.188831] sd 12:0:0:0: [sdf] 495616 2048-byte logical blocks: (1.01 GB/968 MiB)
[31031.189437] sd 12:0:0:0: [sdf] Write Protect is off
[31031.189441] sd 12:0:0:0: [sdf] Mode Sense: 64 00 00 08
[31031.190183] sd 12:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[31031.191682] sd 12:0:0:0: [sdf] 495616 2048-byte logical blocks: (1.01 GB/968 MiB)
[31031.196210]  sdf:
[31031.197448] sd 12:0:0:0: [sdf] 495616 2048-byte logical blocks: (1.01 GB/968 MiB)
[31031.198684] sd 12:0:0:0: [sdf] Attached SCSI removable disk
[31032.751375] FAT-fs (sdf): error, fat_free_clusters: deleting FAT entry beyond EOF
[31032.751379] FAT-fs (sdf): Filesystem has been set read-only
[31033.468695] FAT-fs (sde): Directory bread(block 2048) failed
[31033.468698] FAT-fs (sde): Directory bread(block 2049) failed
[31033.468700] FAT-fs (sde): Directory bread(block 2050) failed
[31033.468702] FAT-fs (sde): Directory bread(block 2051) failed
[31033.468725] FAT-fs (sde): Directory bread(block 2048) failed
[31033.468727] FAT-fs (sde): Directory bread(block 2049) failed
[31033.468729] FAT-fs (sde): Directory bread(block 2050) failed
[31033.468730] FAT-fs (sde): Directory bread(block 2051) failed
[31271.048301] usb 1-1.1: USB disconnect, device number 13
[31275.474866] usb 1-1.1: new high-speed USB device number 14 using ehci_hcd
[31275.571362] scsi13 : usb-storage 1-1.1:1.0
[31276.571493] scsi 13:0:0:0: Direct-Access     Apple    iPod             2.70 PQ: 0 ANSI: 2
[31276.574270] sd 13:0:0:0: [sdg] 495616 2048-byte logical blocks: (1.01 GB/968 MiB)
[31276.574803] sd 13:0:0:0: [sdg] Write Protect is off
[31276.574806] sd 13:0:0:0: [sdg] Mode Sense: 64 00 00 08
[31276.574981] sd 13:0:0:0: Attached scsi generic sg2 type 0
[31276.575302] sd 13:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[31276.576685] sd 13:0:0:0: [sdg] 495616 2048-byte logical blocks: (1.01 GB/968 MiB)
[31276.582570]  sdg:
[31276.583868] sd 13:0:0:0: [sdg] 495616 2048-byte logical blocks: (1.01 GB/968 MiB)
[31276.585304] sd 13:0:0:0: [sdg] Attached SCSI removable disk
[31277.554585] FAT-fs (sdf): Directory bread(block 2048) failed
[31277.554591] FAT-fs (sdf): Directory bread(block 2049) failed
[31277.554594] FAT-fs (sdf): Directory bread(block 2050) failed
[31277.554596] FAT-fs (sdf): Directory bread(block 2051) failed
[31277.554661] FAT-fs (sdf): Directory bread(block 2048) failed
[31277.554664] FAT-fs (sdf): Directory bread(block 2049) failed
[31277.554667] FAT-fs (sdf): Directory bread(block 2050) failed
[31277.554669] FAT-fs (sdf): Directory bread(block 2051) failed

[dadexix86]

Come temevo, ci sono dei problemi sul file system dell'iPod.

Codice: Seleziona tutto

[30906.281948] FAT-fs (sdc): Directory bread(block 2048) failed
[30906.281953] FAT-fs (sdc): Directory bread(block 2049) failed
[30906.281956] FAT-fs (sdc): Directory bread(block 2050) failed
[30906.281958] FAT-fs (sdc): Directory bread(block 2051) failed
[30906.281995] FAT-fs (sdc): Directory bread(block 2048) failed
[30906.281998] FAT-fs (sdc): Directory bread(block 2049) failed
[30906.282000] FAT-fs (sdc): Directory bread(block 2050) failed
[30906.282002] FAT-fs (sdc): Directory bread(block 2051) failed

Questo può essere un sintomo del fatto che a breve ti abbandonerà, nel frattempo puoi provare a fargli fare un check (ma sarebbe meglio farlo da Windows) con

Codice: Seleziona tutto

sudo fsck.vfat -nVv /dev/sdXY

dove al posto di XY metti devide e partizione (con l'opzione -n non viene fatto nulla, serve solo a vedere se effettivamente ci sono dei problemi correggibili).

Ovviamente posta qui l'output

[wellish]

"dove al posto di XY metti devide e partizione"

Dove li trovo?

Non sono un gran intenditore, non saprei come trovarla....

[dadexix86]

Collegalo e poi posta

Codice: Seleziona tutto

sudo fdisk -l

[wellish]

Codice: Seleziona tutto

sudo fdisk -l



WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 testine, 63 settori/tracce, 121601 cilindri, totale 1953525168 settori
Unità = settori di 1 * 512 = 512 byte
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Identificativo disco: 0xaa88c412

Dispositivo Boot      Start         End      Blocks   Id  System
/dev/sda1               1  1953525167   976762583+  ee  GPT
Partition 1 does not start on physical sector boundary.
Nota: la dimensione del settore è 2048 (non 512)

Disco /dev/sdg: 1015 MB, 1015021568 byte
32 testine, 61 settori/tracce, 253 cilindri, totale 495616 settori
Unità = settori di 1 * 2048 = 2048 byte
Sector size (logical/physical): 2048 bytes / 2048 bytes
I/O size (minimum/optimal): 2048 bytes / 2048 bytes
Identificativo disco: 0x6f20736b

Questa non sembra una tabella delle partizioni.
Probabilmente è stato scelto il dispositivo sbagliato.

Dispositivo Boot      Start         End      Blocks   Id  System
/dev/sdg1   ?   778135908  1919645538  2283019262   72  Sconosciuto
/dev/sdg2   ?   168689522  2104717761  3872056480   65  Novell Netware 386
/dev/sdg3   ?  1869881465  3805909656  3872056384   79  Sconosciuto
/dev/sdg4   ?  2885681152  2885736650      110998    d  Sconosciuto

Le voci nella tabella delle partizioni non sono nello stesso ordine del disco

[wellish]

Eppure, quando do sul terminale "lsusb", mi restituisce:

Codice: Seleziona tutto

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 003: ID 413c:2111 Dell Computer Corp. 
Bus 002 Device 004: ID 0461:4e22 Primax Electronics, Ltd 
Bus 001 Device 007: ID 05ac:1301 Apple, Inc. iPod Shuffle 2.Gen

L'ultima riga dice che lo sente......

[wellish]

Sono riuscito a risolvere !

Semplicemente eliminare da synaptic il pacchetto "libgpod-common".

Trovata soluzione su una pagina in inglese, link: https://bugs.launchpad.net/ubuntu/+sour ... bug/565971

[dadexix86]

Ottimo!

Alla prossima!