ubuntu 19.10 problemi con audio hdmi no surround 5.1

Installazione, configurazione e utilizzo di applicativi multimediali, masterizzazione, acquisizione e codec audio/video, streaming e altro.
Scrivi risposta
alone13
Prode Principiante
Messaggi: 162
Iscrizione: sabato 29 maggio 2010, 4:54
Distribuzione: ubuntu 64bit

ubuntu 19.10 problemi con audio hdmi no surround 5.1

Messaggio da alone13 » venerdì 3 gennaio 2020, 17:48

Ciao, come spesso mi accade ho problemi con l'audio,ho provato varie guide ma senza risolvere.
Attualmente (collegamento a tv con cavo hdmi che li gira su surround con cavo ottico, e la parte tv surround funziona)sento solo le casse di dx e sx utilizzando un file surround 5.1.
quando faccio il test con il file in 5.1 , a parte l'uscita del subwoofer, le altre danno segni di vita sul pulseaudio volume meter, ma dalle casse non esce il suono tranne le solite 2, anche facendo il test dA TERMINALE:

speaker-test surround51 -c6

aplay -D plughw:1,0 /usr/share/sounds/alsa/Front_Center.wav (da terminale sembra che il comando vada a buon fine, ma non si sente nulla)

aplay /usr/share/sounds/alsa/Front_Center.wav (con questo comando la cassa centrale emette la frase "Front Center")

(schermate 1,2)

alsamixer non so quale scheda mi carichi di default, negli allegati ho messo la scheda 1 HD-Audio Generic

aplay -L

Codice: Seleziona tutto

default
    Playback/recording through the PulseAudio sound server
null
    Discard all samples (playback) or generate zero samples (capture)
jack
    JACK Audio Connection Kit
pulse
    PulseAudio Sound Server
hdmi:CARD=Generic,DEV=0
    HD-Audio Generic, HDMI 0
    HDMI Audio Output
hdmi:CARD=Generic,DEV=1
    HD-Audio Generic, HDMI 1
    HDMI Audio Output
hdmi:CARD=Generic,DEV=2
    HD-Audio Generic, HDMI 2
    HDMI Audio Output
hdmi:CARD=Generic,DEV=3
    HD-Audio Generic, HDMI 3
    HDMI Audio Output
dmix:CARD=Generic,DEV=3
    HD-Audio Generic, HDMI 0
    Direct sample mixing device
dmix:CARD=Generic,DEV=7
    HD-Audio Generic, HDMI 1
    Direct sample mixing device
dmix:CARD=Generic,DEV=8
    HD-Audio Generic, HDMI 2
    Direct sample mixing device
dmix:CARD=Generic,DEV=9
    HD-Audio Generic, HDMI 3
    Direct sample mixing device
dsnoop:CARD=Generic,DEV=3
    HD-Audio Generic, HDMI 0
    Direct sample snooping device
dsnoop:CARD=Generic,DEV=7
    HD-Audio Generic, HDMI 1
    Direct sample snooping device
dsnoop:CARD=Generic,DEV=8
    HD-Audio Generic, HDMI 2
    Direct sample snooping device
dsnoop:CARD=Generic,DEV=9
    HD-Audio Generic, HDMI 3
    Direct sample snooping device
hw:CARD=Generic,DEV=3
    HD-Audio Generic, HDMI 0
    Direct hardware device without any conversions
hw:CARD=Generic,DEV=7
    HD-Audio Generic, HDMI 1
    Direct hardware device without any conversions
hw:CARD=Generic,DEV=8
    HD-Audio Generic, HDMI 2
    Direct hardware device without any conversions
hw:CARD=Generic,DEV=9
    HD-Audio Generic, HDMI 3
    Direct hardware device without any conversions
plughw:CARD=Generic,DEV=3
    HD-Audio Generic, HDMI 0
    Hardware device with all software conversions
plughw:CARD=Generic,DEV=7
    HD-Audio Generic, HDMI 1
    Hardware device with all software conversions
plughw:CARD=Generic,DEV=8
    HD-Audio Generic, HDMI 2
    Hardware device with all software conversions
plughw:CARD=Generic,DEV=9
    HD-Audio Generic, HDMI 3
    Hardware device with all software conversions
usbstream:CARD=Generic
    HD-Audio Generic
    USB Stream Output
a52:CARD=Generic
    HD-Audio Generic
sysdefault:CARD=Generic_1
    HD-Audio Generic, ALC892 Analog
    Default Audio Device
front:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC892 Analog
    Front speakers
surround21:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC892 Analog
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC892 Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC892 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC892 Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC892 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC892 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
dmix:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC892 Analog
    Direct sample mixing device
dsnoop:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC892 Analog
    Direct sample snooping device
hw:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC892 Analog
    Direct hardware device without any conversions
plughw:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC892 Analog
    Hardware device with all software conversions
usbstream:CARD=Generic_1
    HD-Audio Generic
    USB Stream Output
a52:CARD=Generic_1
    HD-Audio Generic
sudo gedit /etc/pulse/default.pa

Codice: Seleziona tutto

#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.

# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)

.fail

### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore

### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties

### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available

### Use hot-plugged devices like Bluetooth or USB automatically (LP: #1702794)
.ifexists module-switch-on-connect.so
load-module module-switch-on-connect
.endif

### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
load-module module-alsa-sink device=hw:1,0
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink

### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect tsched=0
.endif

### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif

### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif

.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif

### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix

### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish

### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv

### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor

### Load additional modules from GSettings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gsettings.so
.nofail
load-module module-gsettings
.fail
.endif


### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore

### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams

### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink

### Honour intended role device property
load-module module-intended-roles

### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle

### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif

### Enable positioned event sounds
load-module module-position-event-sounds

### Cork music/video streams when a phone stream is active
load-module module-role-cork

### Block audio recording for snap confined packages unless they have
### the "pulseaudio" or "audio-record" interfaces plugged.
.ifexists module-snap-policy.so
load-module module-snap-policy
.endif

### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply

### Make some devices default
#set-default-sink output
#set-default-source input

load-module module-combine channels=6 channel_map=front-left,front-right,rear-left,rear-right,front-center,lfe
sudo gedit /etc/pulse/daemon.conf

Codice: Seleziona tutto

# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.

## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out.  Use either ; or # for
## commenting.

; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; enable-memfd = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; lock-memory = no
; cpu-limit = no

; high-priority = yes
; nice-level = -11

; realtime-scheduling = yes
; realtime-priority = 5

; exit-idle-time = 20
; scache-idle-time = 20

; dl-search-path = (depends on architecture)

; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa

; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0

; resample-method = speex-float-1
; avoid-resampling = false
; enable-remixing = yes
; remixing-use-all-sink-channels = yes
enable-lfe-remixing = yes
; lfe-crossover-freq = 0

flat-volumes = no

; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 200000

; default-sample-format = s16le
; default-sample-rate = 44100
default-sample-rate = 48000
; alternate-sample-rate = 48000
default-sample-channels = 6
; default-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe

; default-fragments = 4
; default-fragment-size-msec = 10

; enable-deferred-volume = yes
deferred-volume-safety-margin-usec = 1
; deferred-volume-extra-delay-usec = 0
sudo nano ~/.asoundrc

Codice: Seleziona tutto

pcm.a52 {
  @args [CARD]
  @args.CARD {
    type string
  }
  type rate
  slave {
    pcm {
      type a52
      bitrate 448
      channels 6
      card $CARD
    }
    rate 48000
  }
}
aggiungo

lspci -v

Codice: Seleziona tutto

00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Root Complex
	Subsystem: ASRock Incorporation Raven/Raven2 Root Complex
	Flags: fast devsel

00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 IOMMU
	Subsystem: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 IOMMU
	Flags: bus master, fast devsel, latency 0, IRQ 25
	Capabilities: <access denied>

00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge
	Flags: fast devsel

00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 PCIe GPP Bridge [6:0] (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0, IRQ 26
	Bus: primary=00, secondary=01, subordinate=05, sec-latency=0
	I/O behind bridge: 0000f000-0000ffff [size=4K]
	Memory behind bridge: fcd00000-fcefffff [size=2M]
	Prefetchable memory behind bridge: 00000000f0300000-00000000f03fffff [size=1M]
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge
	Flags: fast devsel

00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Internal PCIe GPP Bridge 0 to Bus A (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0, IRQ 27
	Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
	I/O behind bridge: 0000e000-0000efff [size=4K]
	Memory behind bridge: fc900000-fccfffff [size=4M]
	Prefetchable memory behind bridge: 00000000e0000000-00000000f01fffff [size=258M]
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:08.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Internal PCIe GPP Bridge 0 to Bus B (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0, IRQ 28
	Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
	I/O behind bridge: None
	Memory behind bridge: fcf00000-fcffffff [size=1M]
	Prefetchable memory behind bridge: None
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 61)
	Subsystem: ASRock Incorporation FCH SMBus Controller
	Flags: 66MHz, medium devsel
	Kernel driver in use: piix4_smbus
	Kernel modules: i2c_piix4, sp5100_tco

00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 51)
	Subsystem: ASRock Incorporation FCH LPC Bridge
	Flags: bus master, 66MHz, medium devsel, latency 0

00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 0
	Flags: fast devsel

00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 1
	Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 2
	Flags: fast devsel

00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 3
	Flags: fast devsel
	Kernel driver in use: k10temp
	Kernel modules: k10temp

00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 4
	Flags: fast devsel

00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 5
	Flags: fast devsel

00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 6
	Flags: fast devsel

00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 7
	Flags: fast devsel

01:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset USB 3.1 xHCI Controller (rev 02) (prog-if 30 [XHCI])
	Subsystem: ASRock Incorporation 300 Series Chipset USB 3.1 xHCI Controller
	Flags: bus master, fast devsel, latency 0, IRQ 36
	Memory at fcea0000 (64-bit, non-prefetchable) [size=32K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd

01:00.1 SATA controller: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset SATA Controller (rev 02) (prog-if 01 [AHCI 1.0])
	Subsystem: ASRock Incorporation 300 Series Chipset SATA Controller
	Flags: bus master, fast devsel, latency 0, IRQ 55
	Memory at fce80000 (32-bit, non-prefetchable) [size=128K]
	Expansion ROM at fce00000 [disabled] [size=512K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

01:00.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 43b2 (rev 02) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0, IRQ 30
	Bus: primary=01, secondary=02, subordinate=05, sec-latency=0
	I/O behind bridge: 0000f000-0000ffff [size=4K]
	Memory behind bridge: fcd00000-fcdfffff [size=1M]
	Prefetchable memory behind bridge: 00000000f0300000-00000000f03fffff [size=1M]
	Capabilities: <access denied>
	Kernel driver in use: pcieport

02:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0, IRQ 32
	Bus: primary=02, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: None
	Memory behind bridge: None
	Prefetchable memory behind bridge: None
	Capabilities: <access denied>
	Kernel driver in use: pcieport

02:01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0, IRQ 34
	Bus: primary=02, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 0000f000-0000ffff [size=4K]
	Memory behind bridge: fcd00000-fcdfffff [size=1M]
	Prefetchable memory behind bridge: 00000000f0300000-00000000f03fffff [size=1M]
	Capabilities: <access denied>
	Kernel driver in use: pcieport

02:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0, IRQ 35
	Bus: primary=02, secondary=05, subordinate=05, sec-latency=0
	I/O behind bridge: None
	Memory behind bridge: None
	Prefetchable memory behind bridge: None
	Capabilities: <access denied>
	Kernel driver in use: pcieport

04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 11)
	Subsystem: ASRock Incorporation Motherboard (one of many)
	Flags: bus master, fast devsel, latency 0, IRQ 33
	I/O ports at f000 [size=256]
	Memory at fcd00000 (64-bit, non-prefetchable) [size=4K]
	Memory at f0300000 (64-bit, prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: r8169
	Kernel modules: r8169

06:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series] (rev c6) (prog-if 00 [VGA controller])
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series]
	Flags: bus master, fast devsel, latency 0, IRQ 59
	Memory at e0000000 (64-bit, prefetchable) [size=256M]
	Memory at f0000000 (64-bit, prefetchable) [size=2M]
	I/O ports at e000 [size=256]
	Memory at fcc00000 (32-bit, non-prefetchable) [size=512K]
	[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: amdgpu
	Kernel modules: amdgpu

06:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Raven/Raven2/Fenghuang HDMI/DP Audio Controller
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Raven/Raven2/Fenghuang HDMI/DP Audio Controller
	Flags: bus master, fast devsel, latency 0, IRQ 61
	Memory at fcc88000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

06:00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) Platform Security Processor
	Subsystem: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) Platform Security Processor
	Flags: bus master, fast devsel, latency 0, IRQ 5
	Memory at fcb00000 (32-bit, non-prefetchable) [size=1M]
	Memory at fcc8c000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>

06:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Raven USB 3.1 (prog-if 30 [XHCI])
	Subsystem: ASRock Incorporation Raven USB 3.1
	Flags: bus master, fast devsel, latency 0, IRQ 37
	Memory at fca00000 (64-bit, non-prefetchable) [size=1M]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd

06:00.4 USB controller: Advanced Micro Devices, Inc. [AMD] Raven USB 3.1 (prog-if 30 [XHCI])
	Subsystem: ASRock Incorporation Raven USB 3.1
	Flags: bus master, fast devsel, latency 0, IRQ 46
	Memory at fc900000 (64-bit, non-prefetchable) [size=1M]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd

06:00.6 Audio device: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) HD Audio Controller
	Subsystem: ASRock Incorporation Family 17h (Models 10h-1fh) HD Audio Controller
	Flags: bus master, fast devsel, latency 0, IRQ 62
	Memory at fcc80000 (32-bit, non-prefetchable) [size=32K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

07:00.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 61) (prog-if 01 [AHCI 1.0])
	Subsystem: ASRock Incorporation FCH SATA Controller [AHCI mode]
	Flags: bus master, fast devsel, latency 0, IRQ 58
	Memory at fcf00000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci
Sapreste come indirizzarmi?
grazie
Allegati
schermata 3
schermata 3
schermata 2
schermata 2
schermata 1
schermata 1
Pc assemblato, scheda madre asrock AB350Mpro4, scheda video ASUS DUAL-RX580-O4G
AMD Ryzen 5 2400G with Radeon Vega graphics, AMD Raven
16GB ram, ssd samsung evo 500GB, tv led hdmi

Scrivi risposta

Ritorna a “Multimediale”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 9 ospiti