Pagina 1 di 1

[RISOLTO] Problemi BOOT

Inviato: lunedì 3 settembre 2007, 17:54
da ceciacd
Ciao, questa è la mia situazione hardware. Ho due dischi sata, in 1 c'è Ubuntu (sul SATA 1), mentre sul secondo ho una doppia partizione win / ubuntu (sul sata 2). Il secondo Hd ha dei problemi e non funziona sempre, ma lo utilizzo semplicemente per programmi che girano solo su win. Come posso fare per scegliere se far partire Ubuntu sul disco 1 o il win sul disco 2?

All'inizio avevo un solo hd con win / ubuntu, ora ne ho due come sopra. come posso fare?

Re: Problemi BOOT

Inviato: lunedì 3 settembre 2007, 18:16
da filo1234
ciao ma quando hai installato ubuntu sul disco sata1 era collegato l' altro disco??  avrebbe dovuto riconoscere il dual boot in automatico a ell' avvio darti una schermata in cui scegliere il sistema operativo  da avviare ...

Re: Problemi BOOT

Inviato: lunedì 3 settembre 2007, 18:32
da ceciacd
No il secondo disco non era collegato durante l'installazione. l'ho collegato successivamente per recuperare dati, e ora vorrei riuscire a utilizzare il win se è possibile

Re: Problemi BOOT

Inviato: lunedì 3 settembre 2007, 18:45
da filo1234
hai appena installato ubuntu sul primo hd??  se si ti consiglio di rifare l' installazione lasciando anche l' altro disco collegato è molto più veloce e facile che stare a recuperare il grub e modificare altri file ...

Re: Problemi BOOT

Inviato: lunedì 3 settembre 2007, 18:46
da ceciacd
non ho appena fatto l'installazione, è già passato un mesetto. perderei tutto!  :(

Re: Problemi BOOT

Inviato: lunedì 3 settembre 2007, 18:54
da filo1234
dunque allora è gia più complicato... dunque dovresti dirmi cosa succede in questi casi :
1 avviando il pc con i 2 hd collegati
2 avviando il pc con il primo hd collegato
3 avviando il pc con il secondo hd collegato
poi dovresti postare

Codice: Seleziona tutto

sudo gedit /boot/grub/menu.lst
quando avvi con il primo hd
e

Codice: Seleziona tutto

sudo /gedit/boot/grub/menu.lst
quando avvi con solo il secondo hd collegato che se non sbaglio hai detto che è in dual boot con windows ...

Re: Problemi BOOT

Inviato: mercoledì 5 settembre 2007, 12:08
da ceciacd
Questo è il codice del primo HD, purtroppo nel secondo Hd ubuntu non parte più perchè l'Hd è difettoso, ma all'avvio posso segliere se far partire Ubuntu o win (Che funziona)

Codice: Seleziona tutto


# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default		0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout		3

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title		Windows 95/98/NT/2000
# root		(hd0,0)
# makeactive
# chainloader	+1
#
# title		Linux
# root		(hd0,1)
# kernel	/vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=d0910871-af8a-4ecc-bedb-7dbeb0dde6b0 ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## ## End Default Options ##

title		Ubuntu, kernel 2.6.20-16-generic
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.20-16-generic root=UUID=d0910871-af8a-4ecc-bedb-7dbeb0dde6b0 ro quiet splash
initrd		/boot/initrd.img-2.6.20-16-generic
quiet
savedefault

title		Ubuntu, kernel 2.6.20-16-generic (recovery mode)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.20-16-generic root=UUID=d0910871-af8a-4ecc-bedb-7dbeb0dde6b0 ro single
initrd		/boot/initrd.img-2.6.20-16-generic

title		Ubuntu, kernel 2.6.20-15-generic
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.20-15-generic root=UUID=d0910871-af8a-4ecc-bedb-7dbeb0dde6b0 ro quiet splash
initrd		/boot/initrd.img-2.6.20-15-generic
quiet
savedefault

title		Ubuntu, kernel 2.6.20-15-generic (recovery mode)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.20-15-generic root=UUID=d0910871-af8a-4ecc-bedb-7dbeb0dde6b0 ro single
initrd		/boot/initrd.img-2.6.20-15-generic

title		Ubuntu, memtest86+
root		(hd0,0)
kernel		/boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST


Re: Problemi BOOT

Inviato: mercoledì 5 settembre 2007, 14:31
da filo1234
prova ad aggiungere questo alla fine del tuo menu.lst sotto END DEBIAN AUTOMAGICKERNEL LIST

Codice: Seleziona tutto

# This is a divider, added to separate the menu items below from the Debian
# ones.
title           Other operating systems:
root


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb1.
title      Microsoft Windows XP Professional
root      (hd1,0)
savedefault
makeactive
map      (hd0) (hd1)
map      (hd1) (hd0)
chainloader   +1
ps: windows è nella prima partizione del secondo hd vero?? altrimenti devi cambiare (hd1,0) in (hd1,1) se windows sta nella seconda partizione del secondo disco

Re: Problemi BOOT

Inviato: giovedì 6 settembre 2007, 10:26
da ceciacd
Perfetto ora posso scegliere cosa far partire. Grazie mille!

Re: [RISOLTO] Problemi BOOT

Inviato: giovedì 6 settembre 2007, 13:38
da filo1234
bene  (b2b)