Pagina 1 di 1

Artefatti grafici

Inviato: venerdì 14 dicembre 2007, 10:50
da redcore
Ultimamente, dopo l'installazione dei Catalyst 7-11... alcune volte mentre uso firefox o amsn (e più o meno tutte le applicazioni in gtk) si formano prima degli artefatti (spesso 4 o 6 linee parallele di circa 1 cm e di colore nero o blu) intorno al puntatore del mouse e poi si crea un artefatto statico nell'angolo in basso a destra del desktop (sempre una decina di linee nere che cambiano colore in base alla finestra che ci passa sopra)...  le linee scompaiono solo se riavvio la sessione grafica... (mad)

Qualcuno sa spiegarmi cos'è??? E' talmente discontinuo come problema che non sono riuscito a trovare niente che possa spiegarlo... ho provato a cambiare il tema del puntatore del mouse e ora attendo se si verificano cambiamenti...
AIUTO!!! :(

Re: Artefatti grafici

Inviato: venerdì 14 dicembre 2007, 13:49
da spessotto
Ho il tuo stesso problema, sia per quanto riguarda il puntatore sia per le righe in basso a destra.
La mia scheda video è una Radeon 9800 ed i driver Ati alla versione 8.42.3
Per ora non ho fatto altro che convivere con questi artefatti, anche perché mi si presentano con una frequenza tutto sommato bassa. Se escono fuori soluzioni valide tanto di guadagnato.  ;D

Re: Artefatti grafici

Inviato: venerdì 14 dicembre 2007, 14:22
da scacchia
anche io soffro dello stesso problema...

se cerchi nel forum "watermark" o "artefatti" trovi vari link dove si sta discutendo di questo prolema, ho giusto adesso risposto ad un post dove stiamo trattando questo tema e sembra che un altro utente abbia trovato una soluzione... http://forum.ubuntu-it.org/viewtopic.php?p=960584#p960584

io non ho ancora provato.

(b2b)

Re: Artefatti grafici

Inviato: venerdì 14 dicembre 2007, 14:43
da spessotto
grazie. proverò a seguire i consigli proposti ed aggiornerò su eventuali evoluzioni.
ciao

Re: Artefatti grafici

Inviato: venerdì 14 dicembre 2007, 16:19
da redcore
La vedo male, io le righe che cita il post http://forum.ubuntu-it.org/viewtopic.php?p=960584#p960584
le ho da sempre attive... ma le bande nere ci sono!!!

Cmq ho una ati radeon 9600 XT con i Catalyst 7-11... ma il problema i driver me lo danno solo ora che li ho installati con il metodo completo e non con quello abbreviato... la volta precedente, per sbrigarmi ho solo reso eseguibile il file di installazione e l'ho lanciato lasciando le opzioni in automatico... però di preciso non so cosa mi abbia aggiunto al sistema che non causava questo problema...

a risentirci! (b2b)

Re: Artefatti grafici

Inviato: domenica 16 dicembre 2007, 18:34
da redcore
Una sessione intera di un giorno andata bene... è la prima volta da quando ho i driver 7-11...
vi posto il mio xorg.conf visto che ho disabilitato un bel po' di roba che pensavo potesse creare problemi senza risentirne in termini di prestazioni...

Codice: Seleziona tutto


# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"

# Uncomment if you have a wacom tablet
#	InputDevice     "stylus"	"SendCoreEvents"
#	InputDevice     "cursor"	"SendCoreEvents"
#	InputDevice     "eraser"	"SendCoreEvents"
	Identifier     "Default Layout"
	Screen      0  "aticonfig-Screen[0]" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
EndSection

Section "Files"
	FontPath	"/usr/share/fonts/X11/misc"
	FontPath	"/usr/share/fonts/X11/cyrillic"
	FontPath	"/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/Type1"
	FontPath	"/usr/share/fonts/X11/100dpi"
	FontPath	"/usr/share/fonts/X11/75dpi"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"bitmap"
	Load	"dbe"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"v4l"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "it"
	Option	    "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ImPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
	Identifier  "stylus"
	Driver      "wacom"
	Option	    "Device" "/dev/input/wacom"
	Option	    "Type" "stylus"
	Option	    "ForceDevice" "ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "Device" "/dev/input/wacom"
	Option	    "Type" "eraser"
	Option	    "ForceDevice" "ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "Device" "/dev/input/wacom"
	Option	    "Type" "cursor"
	Option	    "ForceDevice" "ISDV4"		# Tablet PC ONLY
EndSection

Section "Monitor"
	Identifier   "HannStar X50"
	HorizSync    28.0 - 50.0
	VertRefresh  43.0 - 75.0
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier	"ATI Technologies Inc RV350 AR [Radeon 9600]"
	Driver		"fglrx"
	BusID		"PCI:1:0:0"
	VideoRam	262144
	Option		"VideoOverlay"		"on"
	Option		"OpenGLOverlay"		"off"
#	Option 		"AccelMethod" "XAA"
#	Option		"UseFBDev"		"true"
	Option		"XAANoOffscreenPixmaps" "true"
	Option		"DisableGLXRootClipping" "true"
	Option		"AddARGBGLXVisuals" "true"
	Option		"AllowGLXWithComposite" "true"
#	Option 		"AGPMode" "8"
#	Option 		"GARTSize" "64"
#	Option 		"EnablePageFlip" "1"
#	Option 		"AGPFastWrite"
#	Option 		"ColorTiling" "1"
#	Option		"RenderAccel" "true"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]"
	Driver      "fglrx"
EndSection

Section "Screen"
	Identifier "Default Screen"
	Device     "ATI Technologies Inc RV350 AR [Radeon 9600]"
	Monitor    "HannStar X50"
	DefaultDepth     24
	SubSection "Display"
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]"
	Device     "aticonfig-Device[0]"
	Monitor    "aticonfig-Monitor[0]"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

...poi, se qualcuno sa quali parametri mi servono per far lavorare decentemente la mia scheda video io sono qui!
:D

Re: Artefatti grafici

Inviato: martedì 18 dicembre 2007, 8:47
da redcore
Come non detto... stamattina sono ritornate le bande nere in basso a destra! :-\

Però ho trovato questo https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/150627

Re: Artefatti grafici

Inviato: martedì 18 dicembre 2007, 13:02
da scacchia
sembra sia un problema che si verifica se si installano i driver con il metodo manuale, in quanto vengono prodotti male due file control e signature, se invece si fa l'installazione lanciando l'eseguibile ATI questo produrrà correttamente i due file e non si avranno problemi di watermark (bande nere)

guarda qui:

http://forum.ubuntu-it.org/viewtopic.php?p=902826#p902826

non ho ancora provato a disinstallare i driver e reinstallarli col metodo "automatico", quando ho un po di tempo provo e ti faccio sapere.

ciao  (b2b)

Re: Artefatti grafici

Inviato: domenica 23 dicembre 2007, 21:28
da redcore
Ho provato io... non funziona... cioè, sembra funzioni all'inizio, ma dopo qualche tempo, quando meno te l'aspetti... ricompaiono!  :-\

Re: Artefatti grafici

Inviato: lunedì 24 dicembre 2007, 0:30
da spessotto
è successo pure a me oggi, dopo vari giorni di latitanza dei famigerati artefatti. barre in basso a destra e cursore del mouse cangiante.
vabbè, prendiamoli come addobbi natalizi. buone feste a tutti  (b2b)