pppconfig e composizione del numero
Inviato: sabato 8 aprile 2006, 18:55
Salve ho da poco installato ubuntu linux sul mio computer. Sono riuscito a configurare la connessione a internet tramite un modem seriale ELSA MICROLINK 56K. Ho notato tuttavia che all'inizio impiega un tempo relativamente lungo (1 – 2 minuti) per comporre il numero. Se mi disconnetto e mi riconnetto la composizione del numero avviene praticamente subito. Invio il file di log per maggior chiarezza (io non ci capisco niente):
Apr 8 20:18:52 localhost pppd[8728]: pppd 2.4.3 started by xxxxx , uid 1000
Apr 8 20:18:53 localhost chat[8729]: abort on (BUSY)
Apr 8 20:18:53 localhost chat[8729]: abort on (NO CARRIER)
Apr 8 20:18:53 localhost chat[8729]: abort on (VOICE)
Apr 8 20:18:53 localhost chat[8729]: abort on (NO DIALTONE)
Apr 8 20:18:53 localhost chat[8729]: abort on (NO DIAL TONE)
Apr 8 20:18:53 localhost chat[8729]: abort on (NO ANSWER)
Apr 8 20:18:53 localhost chat[8729]: abort on (DELAYED)
Apr 8 20:18:53 localhost chat[8729]: send (ATZ^M)
Apr 8 20:18:53 localhost chat[8729]: expect (OK)
Apr 8 20:19:38 localhost chat[8729]: alarm
Apr 8 20:19:38 localhost chat[8729]: send (AT^M)
Apr 8 20:19:38 localhost chat[8729]: expect (OK)
Apr 8 20:19:38 localhost chat[8729]: AT^M^M
Apr 8 20:19:38 localhost chat[8729]: OK
Apr 8 20:19:38 localhost chat[8729]: -- got it
Apr 8 20:19:38 localhost chat[8729]: send (ATDT7020187187^M)
Apr 8 20:19:38 localhost chat[8729]: expect (CONNECT)
Apr 8 20:19:38 localhost chat[8729]: ^M
Apr 8 20:20:06 localhost chat[8729]: ATDT7020187187^M^M
Apr 8 20:20:06 localhost chat[8729]: CONNECT
Apr 8 20:20:06 localhost chat[8729]: -- got it
Apr 8 20:20:06 localhost chat[8729]: send (\d)
Apr 8 20:20:07 localhost pppd[8728]: Serial connection established.
Apr 8 20:20:07 localhost pppd[8728]: using channel 1
Apr 8 20:20:07 localhost pppd[8728]: Using interface ppp0
Apr 8 20:20:07 localhost pppd[8728]: Connect: ppp0 /dev/ttyS0
[...]
Ecco il syslog se mi disconnetto e riconnetto:
Apr 8 20:45:48 localhost pppd[8728]: Terminating on signal 15
Apr 8 20:45:48 localhost pppd[8728]: Connect time 25.7 minutes.
Apr 8 20:45:48 localhost pppd[8728]: Sent 254411 bytes, received 1462666 bytes.
Apr 8 20:45:48 localhost pppd[8728]: Script /etc/ppp/ip-down started (pid 15848)
Apr 8 20:45:48 localhost pppd[8728]: sent [LCP TermReq id=0x2 "User request"]
Apr 8 20:45:48 localhost pppd[8728]: Script /etc/ppp/ip-down finished (pid 15848), status = 0x0
Apr 8 20:45:48 localhost pppd[8728]: rcvd [LCP TermAck id=0x2]
Apr 8 20:45:48 localhost pppd[8728]: Connection terminated.
Apr 8 20:45:49 localhost pppd[8728]: Exit.
Apr 8 20:45:50 localhost pppd[15886]: pppd 2.4.3 started by xxxxx , uid 1000
Apr 8 20:45:51 localhost chat[15887]: abort on (BUSY)
Apr 8 20:45:51 localhost chat[15887]: abort on (NO CARRIER)
Apr 8 20:45:51 localhost chat[15887]: abort on (VOICE)
Apr 8 20:45:51 localhost chat[15887]: abort on (NO DIALTONE)
Apr 8 20:45:51 localhost chat[15887]: abort on (NO DIAL TONE)
Apr 8 20:45:51 localhost chat[15887]: abort on (NO ANSWER)
Apr 8 20:45:51 localhost chat[15887]: abort on (DELAYED)
Apr 8 20:45:51 localhost chat[15887]: send (ATZ^M)
Apr 8 20:45:51 localhost chat[15887]: expect (OK)
Apr 8 20:45:51 localhost chat[15887]: ATZ^M^M
Apr 8 20:45:51 localhost chat[15887]: OK
Apr 8 20:45:51 localhost chat[15887]: -- got it
Apr 8 20:45:51 localhost chat[15887]: send (ATDT7020187187^M)
Apr 8 20:45:52 localhost chat[15887]: expect (CONNECT)
Apr 8 20:45:52 localhost chat[15887]: ^M
Apr 8 20:45:54 localhost pppd[15911]: pppd 2.4.3 started by xxxx , uid 1000
Apr 8 20:45:54 localhost pppd[15911]: Device ttyS0 is locked by pid 15886
Apr 8 20:45:54 localhost pppd[15911]: Exit.
Apr 8 20:46:23 localhost chat[15887]: ATDT7020187187^M^M
Apr 8 20:46:23 localhost chat[15887]: CONNECT
Apr 8 20:46:23 localhost chat[15887]: -- got it
Apr 8 20:46:23 localhost chat[15887]: send (\d)
Apr 8 20:46:24 localhost pppd[15886]: Serial connection established.
Apr 8 20:46:24 localhost pppd[15886]: using channel 2
Apr 8 20:46:24 localhost pppd[15886]: Using interface ppp0
Apr 8 20:46:24 localhost pppd[15886]: Connect: ppp0 /dev/ttyS0
Nessuno a qualche idea su come velocizzare all'inizio la composizione del numero?
Grazie
Apr 8 20:18:52 localhost pppd[8728]: pppd 2.4.3 started by xxxxx , uid 1000
Apr 8 20:18:53 localhost chat[8729]: abort on (BUSY)
Apr 8 20:18:53 localhost chat[8729]: abort on (NO CARRIER)
Apr 8 20:18:53 localhost chat[8729]: abort on (VOICE)
Apr 8 20:18:53 localhost chat[8729]: abort on (NO DIALTONE)
Apr 8 20:18:53 localhost chat[8729]: abort on (NO DIAL TONE)
Apr 8 20:18:53 localhost chat[8729]: abort on (NO ANSWER)
Apr 8 20:18:53 localhost chat[8729]: abort on (DELAYED)
Apr 8 20:18:53 localhost chat[8729]: send (ATZ^M)
Apr 8 20:18:53 localhost chat[8729]: expect (OK)
Apr 8 20:19:38 localhost chat[8729]: alarm
Apr 8 20:19:38 localhost chat[8729]: send (AT^M)
Apr 8 20:19:38 localhost chat[8729]: expect (OK)
Apr 8 20:19:38 localhost chat[8729]: AT^M^M
Apr 8 20:19:38 localhost chat[8729]: OK
Apr 8 20:19:38 localhost chat[8729]: -- got it
Apr 8 20:19:38 localhost chat[8729]: send (ATDT7020187187^M)
Apr 8 20:19:38 localhost chat[8729]: expect (CONNECT)
Apr 8 20:19:38 localhost chat[8729]: ^M
Apr 8 20:20:06 localhost chat[8729]: ATDT7020187187^M^M
Apr 8 20:20:06 localhost chat[8729]: CONNECT
Apr 8 20:20:06 localhost chat[8729]: -- got it
Apr 8 20:20:06 localhost chat[8729]: send (\d)
Apr 8 20:20:07 localhost pppd[8728]: Serial connection established.
Apr 8 20:20:07 localhost pppd[8728]: using channel 1
Apr 8 20:20:07 localhost pppd[8728]: Using interface ppp0
Apr 8 20:20:07 localhost pppd[8728]: Connect: ppp0 /dev/ttyS0
[...]
Ecco il syslog se mi disconnetto e riconnetto:
Apr 8 20:45:48 localhost pppd[8728]: Terminating on signal 15
Apr 8 20:45:48 localhost pppd[8728]: Connect time 25.7 minutes.
Apr 8 20:45:48 localhost pppd[8728]: Sent 254411 bytes, received 1462666 bytes.
Apr 8 20:45:48 localhost pppd[8728]: Script /etc/ppp/ip-down started (pid 15848)
Apr 8 20:45:48 localhost pppd[8728]: sent [LCP TermReq id=0x2 "User request"]
Apr 8 20:45:48 localhost pppd[8728]: Script /etc/ppp/ip-down finished (pid 15848), status = 0x0
Apr 8 20:45:48 localhost pppd[8728]: rcvd [LCP TermAck id=0x2]
Apr 8 20:45:48 localhost pppd[8728]: Connection terminated.
Apr 8 20:45:49 localhost pppd[8728]: Exit.
Apr 8 20:45:50 localhost pppd[15886]: pppd 2.4.3 started by xxxxx , uid 1000
Apr 8 20:45:51 localhost chat[15887]: abort on (BUSY)
Apr 8 20:45:51 localhost chat[15887]: abort on (NO CARRIER)
Apr 8 20:45:51 localhost chat[15887]: abort on (VOICE)
Apr 8 20:45:51 localhost chat[15887]: abort on (NO DIALTONE)
Apr 8 20:45:51 localhost chat[15887]: abort on (NO DIAL TONE)
Apr 8 20:45:51 localhost chat[15887]: abort on (NO ANSWER)
Apr 8 20:45:51 localhost chat[15887]: abort on (DELAYED)
Apr 8 20:45:51 localhost chat[15887]: send (ATZ^M)
Apr 8 20:45:51 localhost chat[15887]: expect (OK)
Apr 8 20:45:51 localhost chat[15887]: ATZ^M^M
Apr 8 20:45:51 localhost chat[15887]: OK
Apr 8 20:45:51 localhost chat[15887]: -- got it
Apr 8 20:45:51 localhost chat[15887]: send (ATDT7020187187^M)
Apr 8 20:45:52 localhost chat[15887]: expect (CONNECT)
Apr 8 20:45:52 localhost chat[15887]: ^M
Apr 8 20:45:54 localhost pppd[15911]: pppd 2.4.3 started by xxxx , uid 1000
Apr 8 20:45:54 localhost pppd[15911]: Device ttyS0 is locked by pid 15886
Apr 8 20:45:54 localhost pppd[15911]: Exit.
Apr 8 20:46:23 localhost chat[15887]: ATDT7020187187^M^M
Apr 8 20:46:23 localhost chat[15887]: CONNECT
Apr 8 20:46:23 localhost chat[15887]: -- got it
Apr 8 20:46:23 localhost chat[15887]: send (\d)
Apr 8 20:46:24 localhost pppd[15886]: Serial connection established.
Apr 8 20:46:24 localhost pppd[15886]: using channel 2
Apr 8 20:46:24 localhost pppd[15886]: Using interface ppp0
Apr 8 20:46:24 localhost pppd[15886]: Connect: ppp0 /dev/ttyS0
Nessuno a qualche idea su come velocizzare all'inizio la composizione del numero?
Grazie