Premetto che questi necessita dell'installazione dell'applicativo uudecode che è regolarmente presente sulla mia macchina
Codice: Seleziona tutto
# uudecode --v
uudecode (GNU sharutils) 4.6.3
Copyright (C) 1994, 1995, 1996, 2002, 2005, 2006 Free Software Foundation, Inc.
Questo è software libero; si vedano i sorgenti per le condizioni di copia.
NON c'è alcuna garanzia; neppure di COMMERCIABILITÀ o di IDONEITÀ AD UNO
SCOPO PARTICOLARE.
Codice: Seleziona tutto
root@WSLinux:/home/specchio/Software/air-1.2.8# ls -l install-air-1.2.8
-rwxr-xr-x 1 specchio specchio 168216 2005-09-19 22:54 install-air-1.2.8
root@WSLinux:/home/specchio/Software/air-1.2.8# ./install-air-1.2.8
Automated Image & Restore (AIR) Auto-installer 1.2.8
----------------------------------------------------
This program will install files on your system that are
necessary to run AIR (Automated Image & Restore).
Perl/Tk is not installed on your system or you have a version
(0) other than what is called for, so for the installation
to proceed, it will have to be downloaded from the CPAN site on
the Internet. This means your system must be connected to a
network with Internet access and properly configured. If you
can surf the web then you should be okay.
Once Perl/Tk is downloaded (approx 5.8M), it will automatically
be compiled and installed.
If you are ready to proceed with the installation/upgrade,
press ENTER.
To cancel, hit Control-C.
Attempting to get the latest version of Perl/Tk...
error: HTTP error from server: HTTP/1.1 407 Proxy Authentication Required ( The ISA Server requires authorization to fulfill the request. Access to the Web Proxy filter is denied. )
Download of Tk-804.027.tar.gz failed...
If the failure message indicates that there are too many
connections, it just means that there are too many other
people downloading stuff from the CPAN site. You'll
just have to keep trying every few minutes or so until
you get through.
If the installer failed with some other error message,
please email steve@unixgurus.com for assistance. Be sure
to send the air-install.log which should be found in /tmp.
Codice: Seleziona tutto
root@WSLinux:/home/specchio/Software/air-1.2.8# strings /tmp/air-install.log
Install Log for AIR Version 1.2.8
gio set 18 13:48:51 CEST 2008
PERLTK_VER=804.027
TEMP_DIR=/tmp
INSTALL_DIR=/usr/local
FINAL_INSTALL_DIR=/usr/local
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
stepping : 11
cpu MHz : 1596.000
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 4814.18
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
stepping : 11
cpu MHz : 1596.000
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 4
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 4810.95
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
stepping : 11
cpu MHz : 1596.000
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 4
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 4810.97
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
stepping : 11
cpu MHz : 1596.000
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 4
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 4810.97
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
total used free shared buffers cached
Mem: 4054440 936656 3117784 0 21676 437632
-/+ buffers/cache: 477348 3577092
Swap: 4988172 0 4988172
checking for uudecode:
/usr/bin/uudecode
perl is located at:
/usr/bin/perl
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.15.7, archname=x86_64-linux-gnu-thread-multi
uname='linux yellow 2.6.15.7 #1 smp sun sep 23 13:51:52 utc 2007 x86_64 gnulinux '
config_args='-Dusethreads -Duselargefiles -Dccflags=-DDEBIAN -Dcccdlflags=-fPIC -Darchname=x86_64-linux-gnu -Dprefix=/usr -Dprivlib=/usr/share/perl/5.8 -Darchlib=/usr/lib/perl/5.8 -Dvendorprefix=/usr -Dvendorlib=/usr/share/perl5 -Dvendorarch=/usr/lib/perl5 -Dsiteprefix=/usr/local -Dsitelib=/usr/local/share/perl/5.8.8 -Dsitearch=/usr/local/lib/perl/5.8.8 -Dman1dir=/usr/share/man/man1 -Dman3dir=/usr/share/man/man3 -Dsiteman1dir=/usr/local/man/man1 -Dsiteman3dir=/usr/local/man/man3 -Dman1ext=1 -Dman3ext=3perl -Dpager=/usr/bin/sensible-pager -Uafs -Ud_csh -Ud_ualarm -Uusesfio -Uusenm -Duseshrplib -Dlibperl=libperl.so.5.8.8 -Dd_dosuid -des'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.2.3 20071123 (prerelease) (Ubuntu 4.2.2-3ubuntu4)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lgdbm -lgdbm_compat -ldb -ldl -lm -lpthread -lc -lcrypt
perllibs=-ldl -lm -lpthread -lc -lcrypt
libc=/lib/libc-2.6.1.so, so=so, useshrplib=true, libperl=libperl.so.5.8.8
gnulibc_version='2.6.1'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_IMPLICIT_CONTEXT
PERL_MALLOC_WRAP THREADS_HAVE_PIDS USE_64_BIT_ALL
USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
USE_PERLIO USE_REENTRANT_API
Built under linux
Compiled at Nov 27 2007 10:56:40
@INC:
/etc/perl
/usr/local/lib/perl/5.8.8
/usr/local/share/perl/5.8.8
/usr/lib/perl5
/usr/share/perl5
/usr/lib/perl/5.8
/usr/share/perl/5.8
/usr/local/lib/site_perl
.
Automated Image & Restore (AIR) Auto-installer 1.2.8
----------------------------------------------------
Testing for perl:
Can't locate Tk.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at -e line 1.
BEGIN failed--compilation aborted at -e line 1.
Perl/Tk version:
Need to download Perl/Tk:
decoding snarf...
decoding air-counter...
decoding air...
decoding icons...
decoding tailer...
decoding split...
Download of Tk-804.027.tar.gz failed...
