Pagina 1 di 1

[Install] AIR - Automated Image and Restore

Inviato: giovedì 18 settembre 2008, 13:53
da peppespe
Ho dei problemi nell'installare l'applicativo AIR - Automated Image and Restore (http://air-imager.sourceforge.net/).
Premetto che questi necessita dell'installazione dell'applicativo  uudecode che è regolarmente presente sulla mia macchina

Codice: Seleziona tutto

# uudecode --v
uudecode (GNU sharutils) 4.6.3
Copyright (C) 1994, 1995, 1996, 2002, 2005, 2006 Free Software Foundation, Inc.
Questo è software libero; si vedano i sorgenti per le condizioni di copia.
NON c'è alcuna garanzia; neppure di COMMERCIABILITÀ o di IDONEITÀ AD UNO
SCOPO PARTICOLARE.
nel momento in cui cerco di effettuare l'installazione mi compare il seguente messaggio:

Codice: Seleziona tutto

root@WSLinux:/home/specchio/Software/air-1.2.8# ls -l install-air-1.2.8
-rwxr-xr-x 1 specchio specchio 168216 2005-09-19 22:54 install-air-1.2.8
root@WSLinux:/home/specchio/Software/air-1.2.8# ./install-air-1.2.8

Automated Image & Restore (AIR) Auto-installer 1.2.8
----------------------------------------------------

This program will install files on your system that are
necessary to run AIR (Automated Image & Restore).

Perl/Tk is not installed on your system or you have a version
(0) other than what is called for, so for the installation
to proceed, it will have to be downloaded from the CPAN site on
the Internet.  This means your system must be connected to a
network with Internet access and properly configured.  If you
can surf the web then you should be okay.

Once Perl/Tk is downloaded (approx 5.8M), it will automatically
be compiled and installed.

If you are ready to proceed with the installation/upgrade,
press ENTER.

To cancel, hit Control-C.

Attempting to get the latest version of Perl/Tk...
error: HTTP error from server: HTTP/1.1 407 Proxy Authentication Required ( The ISA Server requires authorization to fulfill the request. Access to the Web Proxy filter is denied.  )
Download of Tk-804.027.tar.gz failed...

If the failure message indicates that there are too many
connections, it just means that there are too many other
people downloading stuff from the CPAN site.  You'll
just have to keep trying every few minutes or so until
you get through.

If the installer failed with some other error message,
please email steve@unixgurus.com for assistance. Be sure
to send the air-install.log which should be found in /tmp.
in cui file di log contiene le seguenti informazioni:

Codice: Seleziona tutto

root@WSLinux:/home/specchio/Software/air-1.2.8# strings /tmp/air-install.log
Install Log for AIR Version 1.2.8
gio set 18 13:48:51 CEST 2008
PERLTK_VER=804.027
TEMP_DIR=/tmp
INSTALL_DIR=/usr/local
FINAL_INSTALL_DIR=/usr/local
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 15
model name	: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz
stepping	: 11
cpu MHz		: 1596.000
cache size	: 4096 KB
physical id	: 0
siblings	: 4
core id		: 0
cpu cores	: 4
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips	: 4814.18
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits physical, 48 bits virtual
power management:
processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 15
model name	: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz
stepping	: 11
cpu MHz		: 1596.000
cache size	: 4096 KB
physical id	: 0
siblings	: 4
core id		: 1
cpu cores	: 4
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips	: 4810.95
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits physical, 48 bits virtual
power management:
processor	: 2
vendor_id	: GenuineIntel
cpu family	: 6
model		: 15
model name	: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz
stepping	: 11
cpu MHz		: 1596.000
cache size	: 4096 KB
physical id	: 0
siblings	: 4
core id		: 2
cpu cores	: 4
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips	: 4810.97
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits physical, 48 bits virtual
power management:
processor	: 3
vendor_id	: GenuineIntel
cpu family	: 6
model		: 15
model name	: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz
stepping	: 11
cpu MHz		: 1596.000
cache size	: 4096 KB
physical id	: 0
siblings	: 4
core id		: 3
cpu cores	: 4
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips	: 4810.97
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits physical, 48 bits virtual
power management:
             total       used       free     shared    buffers     cached
Mem:       4054440     936656    3117784          0      21676     437632
-/+ buffers/cache:     477348    3577092
Swap:      4988172          0    4988172
checking for uudecode:
/usr/bin/uudecode
perl is located at:
/usr/bin/perl
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=linux, osvers=2.6.15.7, archname=x86_64-linux-gnu-thread-multi
    uname='linux yellow 2.6.15.7 #1 smp sun sep 23 13:51:52 utc 2007 x86_64 gnulinux '
    config_args='-Dusethreads -Duselargefiles -Dccflags=-DDEBIAN -Dcccdlflags=-fPIC -Darchname=x86_64-linux-gnu -Dprefix=/usr -Dprivlib=/usr/share/perl/5.8 -Darchlib=/usr/lib/perl/5.8 -Dvendorprefix=/usr -Dvendorlib=/usr/share/perl5 -Dvendorarch=/usr/lib/perl5 -Dsiteprefix=/usr/local -Dsitelib=/usr/local/share/perl/5.8.8 -Dsitearch=/usr/local/lib/perl/5.8.8 -Dman1dir=/usr/share/man/man1 -Dman3dir=/usr/share/man/man3 -Dsiteman1dir=/usr/local/man/man1 -Dsiteman3dir=/usr/local/man/man3 -Dman1ext=1 -Dman3ext=3perl -Dpager=/usr/bin/sensible-pager -Uafs -Ud_csh -Ud_ualarm -Uusesfio -Uusenm -Duseshrplib -Dlibperl=libperl.so.5.8.8 -Dd_dosuid -des'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=define uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-O2',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN -fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='4.2.3 20071123 (prerelease) (Ubuntu 4.2.2-3ubuntu4)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lgdbm -lgdbm_compat -ldb -ldl -lm -lpthread -lc -lcrypt
    perllibs=-ldl -lm -lpthread -lc -lcrypt
    libc=/lib/libc-2.6.1.so, so=so, useshrplib=true, libperl=libperl.so.5.8.8
    gnulibc_version='2.6.1'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
    cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'
Characteristics of this binary (from libperl): 
  Compile-time options: MULTIPLICITY PERL_IMPLICIT_CONTEXT
                        PERL_MALLOC_WRAP THREADS_HAVE_PIDS USE_64_BIT_ALL
                        USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
                        USE_PERLIO USE_REENTRANT_API
  Built under linux
  Compiled at Nov 27 2007 10:56:40
  @INC:
    /etc/perl
    /usr/local/lib/perl/5.8.8
    /usr/local/share/perl/5.8.8
    /usr/lib/perl5
    /usr/share/perl5
    /usr/lib/perl/5.8
    /usr/share/perl/5.8
    /usr/local/lib/site_perl
    .
Automated Image & Restore (AIR) Auto-installer 1.2.8
----------------------------------------------------
Testing for perl:
Can't locate Tk.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at -e line 1.
BEGIN failed--compilation aborted at -e line 1.
Perl/Tk version: 
Need to download Perl/Tk:
decoding snarf...
decoding air-counter...
decoding air...
decoding icons...
decoding tailer...
decoding split...
Download of Tk-804.027.tar.gz failed...

Re: [Install] AIR - Automated Image and Restore

Inviato: giovedì 18 settembre 2008, 16:32
da danilo84
Ma mentre lo installi, sei connesso ad internet?

Codice: Seleziona tutto

This means your system must be connected to a
network with Internet access and properly configured.  If you
can surf the web then you should be okay.

Re: [Install] AIR - Automated Image and Restore

Inviato: giovedì 18 settembre 2008, 16:36
da peppespe
Certo! Quello l'avevo letto anche io. L'unico dubbio ke mi viene è ke sono collegato tramite proxy.

Re: [Install] AIR - Automated Image and Restore

Inviato: giovedì 18 settembre 2008, 16:40
da danilo84
Come se non trovasse il perl. Se da shell dai whereis perl che ti dice?

Re: [Install] AIR - Automated Image and Restore

Inviato: giovedì 18 settembre 2008, 16:41
da peppespe

Codice: Seleziona tutto

# whereis perl
perl: /usr/bin/perl /etc/perl /usr/lib/perl /usr/lib64/perl /usr/share/perl /usr/share/man/man1/perl.1.gz

Re: [Install] AIR - Automated Image and Restore

Inviato: giovedì 18 settembre 2008, 16:43
da danilo84
Da synaptic controlla se hai il pacchetto installato:

perl-tk

altrimenti lo scarichi dai qui:

http://packages.ubuntu.com/hardy/perl-tk

[Risolto] Re: [Install] AIR - Automated Image and Restore

Inviato: giovedì 18 settembre 2008, 17:10
da peppespe
Ottimo funziona:

Codice: Seleziona tutto

# ./install-air-1.2.8

Automated Image & Restore (AIR) Auto-installer 1.2.8
----------------------------------------------------

This program will install files on your system that are
necessary to run AIR (Automated Image & Restore).

Perl/Tk (804.027) is already installed on your system, so
this installer will only update the other components of AIR.

If you are ready to proceed with the installation/upgrade,
press ENTER.

To cancel, hit Control-C.

Skipping download of Perl/Tk (already installed).

creating directory /usr/local/share/air/bitmaps...
creating directory /usr/local/share/air/logs...
Unpacking and installing air-counter...
Install of air-counter is complete.

Unpacking and installing tailer...
Install of tailer is complete.

Unpacking and installing icons...
Install of icons is complete.

Included /usr/local/split is a x86 architecture executable and current machine isn't.
You need /usr/local/bin/split to run air-imager.
Updating AIR to version 1.2.8...
Upgrade to AIR v1.2.8 complete.

Cleaning up...

All Done. Type 'air' on the command-line to begin.