Pagina 1 di 1

Risoluzione video

Inviato: domenica 21 settembre 2008, 16:58
da Belo
Ciao a tutti
ho appena installato xubuntu 8.04 sul computer di mia mamma.

ogni volta che lo accendo, appena prima del login, mi compare una schermata di errore che dice circa cosi:

Codice: Seleziona tutto

Impossibile visualizzare questo modo video,
cambiare impostazione su 1024*768@60Hz
Per fare partire l'interfaccia grafica devo entrare in recovery mode e selezionare xfix oppure aspettare un paio di minuti sulla schermata d'errore e dopo parte da solo.

come posso automatizzare l'impostazione della risoluzione (ho provato a guardare xorg.conf ma nn c'ho capito molto...)??

Re: Problema Schermo

Inviato: domenica 21 settembre 2008, 17:09
da eNry92
ma hai provato a fare come ti dice lui?

Re: Problema Schermo

Inviato: domenica 21 settembre 2008, 17:23
da Belo
eNry92 ha scritto: ma hai provato a fare come ti dice lui?
cioè impostare quella risoluzione?
l'avrei fatto se sapessi come...

Re: Problema Schermo

Inviato: domenica 21 settembre 2008, 17:34
da eNry92
non so su xubuntu,  ma su ubuntu è sistema -> preferenze -> risoluzione schermo

Re: Problema Schermo

Inviato: domenica 21 settembre 2008, 17:43
da Belo
eNry92 ha scritto: non so su xubuntu,  ma su ubuntu è sistema -> preferenze -> risoluzione schermo
Mi sà che è un pò diverso xè nn ho trovato niente... >:(

EDIT: l'ho trovata...
il problema è che tra le risoluzioni proposte non c'è qlla che serve a me!

Re: Risoluzione video

Inviato: lunedì 22 settembre 2008, 8:23
da Belo
help!!!

Re: Risoluzione video

Inviato: lunedì 22 settembre 2008, 17:59
da Belo
Non esiste proprio nessuno che sappia aggiungere una risoluzione a quelle proposte????

ho provato anche a dare da terminale

Codice: Seleziona tutto

sudo dpkg-reconfigure xserver-xorg
Ma mi chiede informazioni solo sulla tastiera.
aggiungo che non ho l'accelerazione 3d installata

Re: Risoluzione video

Inviato: lunedì 22 settembre 2008, 18:27
da damonfiser
Si potrebbe uscire dalla modalità grafica e riconfigurare X, oppure utilizzare i tool grafici a seconda della scheda video... dacci qualche informazione in più
Hai una nvidia? ati? intel? Che monitor hai?

Re: Risoluzione video

Inviato: lunedì 22 settembre 2008, 18:29
da Belo
damonfiser ha scritto: Si potrebbe uscire dalla modalità grafica e riconfigurare X, oppure utilizzare i tool grafici a seconda della scheda video... dacci qualche informazione in più
Hai una nvidia? ati? intel? Che monitor hai?
allora la scheda video penso sia integrata, ad ogni modo lshw mi da qsto risultato:

Codice: Seleziona tutto

-display UNCLAIMED
                description: VGA compatible controller
                product: 630/730 PCI/AGP VGA Display Adapter
                vendor: Silicon Integrated Systems [SiS]
                physical id: 0
                bus info: pci@0000:01:00.0
                version: 20
                width: 32 bits
                clock: 66MHz
                capabilities: pm agp agp-2.0 vga_controller cap_list
                configuration: latency=0
il monitor è un lcd un pò vechiotto della philips (modello 150s2); su google nn ho trovato molte informazioni a riguardo

Re: Risoluzione video

Inviato: lunedì 22 settembre 2008, 19:58
da damonfiser
Posta il tuo xorg.conf

Re: Risoluzione video

Inviato: lunedì 22 settembre 2008, 20:44
da Belo

Codice: Seleziona tutto

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"it"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
EndSection

Section "Device"
	Identifier	"Configured Video Device"
EndSection

Section "Monitor"
	Identifier	"Configured Monitor"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
	Device		"Configured Video Device"
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
EndSection

mi sembra abbastanza "vuoto"....

Re: Risoluzione video

Inviato: lunedì 22 settembre 2008, 23:24
da damonfiser
Assicurati che il pacchetto xserver-xorg-video-sis sia installato
Passa alla modalità testuale con CTRL+ALT+F1 e loggati
Stoppa GDM con

Codice: Seleziona tutto

sudo /etc/init.d/gdm stop
Configura Xorg con

Codice: Seleziona tutto

sudo X -configure
Sposta il file creato nella cartella /etc/X11/ con

Codice: Seleziona tutto

sudo mv xorg.conf.new /etc/X11/xorg.conf
Riavvia GDM con

Codice: Seleziona tutto

sudo /etc/init.d/gdm start

Re: Risoluzione video

Inviato: martedì 23 settembre 2008, 20:26
da Belo
ho fatto cm mi hai detto..
allora il mi xorg.conf si e rimpolpato un po

Codice: Seleziona tutto

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/etc/X11/rgb"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/usr/share/fonts/X11/cyrillic"
	FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/Type1"
	FontPath     "/usr/share/fonts/X11/100dpi"
	FontPath     "/usr/share/fonts/X11/75dpi"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "xtrap"
	Load  "record"
	Load  "glx"
	Load  "dri"
	Load  "GLcore"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	#DisplaySize	  300   230	# mm
	Identifier   "Monitor0"
	VendorName   "PHL"
	ModelName    "Philips 150B"
 ### Comment all HorizSync and VertRefresh values to use DDC:
	HorizSync    30.0 - 61.0
	VertRefresh  56.0 - 76.0
	Option	    "DPMS"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "Accel"              	# [<bool>]
        #Option     "AccelMethod"        	# <str>
        #Option     "TurboQueue"         	# [<bool>]
        #Option     "FastVram"           	# [<bool>]
        #Option     "HostBus"            	# [<bool>]
        #Option     "RenderAcceleration" 	# [<bool>]
        #Option     "ForceCRT1Type"      	# <str>
        #Option     "ForceCRT2Type"      	# <str>
        #Option     "ShadowFB"           	# [<bool>]
        #Option     "DRI"                	# [<bool>]
        #Option     "AGPSize"            	# <i>
        #Option     "GARTSize"           	# <i>
        #Option     "Vesa"               	# [<bool>]
        #Option     "MaxXFBMem"          	# <i>
        #Option     "EnableSiSCtrl"      	# [<bool>]
        #Option     "SWCursor"           	# [<bool>]
        #Option     "HWCursor"           	# [<bool>]
        #Option     "UseColorHWCursor"   	# [<bool>]
        #Option     "Rotate"             	# <str>
        #Option     "Reflect"            	# <str>
        #Option     "Xvideo"             	# [<bool>]
        #Option     "InternalModes"      	# [<bool>]
        #Option     "OverruleFrequencyRanges" 	# [<bool>]
        #Option     "RestoreBySetMode"   	# [<bool>]
        #Option     "ForceCRT1"          	# [<bool>]
        #Option     "XvOnCRT2"           	# [<bool>]
        #Option     "PanelDelayCompensation" 	# <i>
        #Option     "PDC"                	# <i>
        #Option     "PanelDelayCompensation2" 	# <i>
        #Option     "PDC2"               	# <i>
        #Option     "PanelDelayCompensation1" 	# <i>
        #Option     "PDC1"               	# <i>
        #Option     "EMI"                	# <i>
        #Option     "LVDSHL"             	# <i>
        #Option     "ForcePanelRGB"      	# <i>
        #Option     "SpecialTiming"      	# <str>
        #Option     "TVStandard"         	# <str>
        #Option     "UseROMData"         	# [<bool>]
        #Option     "UseOEMData"         	# [<bool>]
        #Option     "YV12"               	# [<bool>]
        #Option     "CHTVType"           	# [<bool>]
        #Option     "CHTVOverscan"       	# [<bool>]
        #Option     "CHTVSuperOverscan"  	# [<bool>]
        #Option     "CHTVLumaBandwidthCVBS" 	# <i>
        #Option     "CHTVLumaBandwidthSVIDEO" 	# <i>
        #Option     "CHTVLumaFlickerFilter" 	# <i>
        #Option     "CHTVChromaBandwidth" 	# <i>
        #Option     "CHTVChromaFlickerFilter" 	# <i>
        #Option     "CHTVCVBSColor"      	# [<bool>]
        #Option     "CHTVTextEnhance"    	# <i>
        #Option     "CHTVContrast"       	# <i>
        #Option     "SISTVEdgeEnhance"   	# <i>
        #Option     "SISTVAntiFlicker"   	# <str>
        #Option     "SISTVSaturation"    	# <i>
        #Option     "SISTVCFilter"       	# [<bool>]
        #Option     "SISTVYFilter"       	# <i>
        #Option     "SISTVColorCalibFine" 	# <i>
        #Option     "SISTVColorCalibCoarse" 	# <i>
        #Option     "SISTVXScale"        	# <i>
        #Option     "SISTVYScale"        	# <i>
        #Option     "TVXPosOffset"       	# <i>
        #Option     "TVYPosOffset"       	# <i>
        #Option     "SIS6326TVAntiFlicker" 	# <str>
        #Option     "SIS6326TVEnableYFilter" 	# [<bool>]
        #Option     "SIS6326TVYFilterStrong" 	# [<bool>]
        #Option     "SIS6326TVForcePlug" 	# <str>
        #Option     "SIS6326FSCAdjust"   	# <i>
        #Option     "YPbPrAspectRatio"   	# <str>
        #Option     "TVBlueWorkAround"   	# [<bool>]
        #Option     "ColorHWCursorBlending" 	# [<bool>]
        #Option     "ColorHWCursorBlendThreshold" 	# <i>
        #Option     "CRT2Detection"      	# [<bool>]
        #Option     "ForceCRT2ReDetection" 	# [<bool>]
        #Option     "SenseYPbPr"         	# [<bool>]
        #Option     "CRT1Gamma"          	# [<bool>]
        #Option     "CRT2Gamma"          	# [<str>]
        #Option     "GammaBrightness"    	# <str>
        #Option     "GammaBrightnessCRT2" 	# <str>
        #Option     "CRT2GammaBrightness" 	# <str>
        #Option     "Brightness"         	# <str>
        #Option     "NewGammaBrightness" 	# <str>
        #Option     "CRT2Brightness"     	# <str>
        #Option     "CRT2NewGammaBrightness" 	# <str>
        #Option     "Contrast"           	# <str>
        #Option     "NewGammaContrast"   	# <str>
        #Option     "CRT2Contrast"       	# <str>
        #Option     "CRT2NewGammaContrast" 	# <str>
        #Option     "CRT1Saturation"     	# <i>
        #Option     "XvGamma"            	# [<str>]
        #Option     "XvDefaultContrast"  	# <i>
        #Option     "XvDefaultBrightness" 	# <i>
        #Option     "XvDefaultHue"       	# <i>
        #Option     "XvDefaultSaturation" 	# <i>
        #Option     "XvDefaultDisableGfx" 	# [<bool>]
        #Option     "XvDefaultDisableGfxLR" 	# [<bool>]
        #Option     "XvChromaMin"        	# <i>
        #Option     "XvChromaMax"        	# <i>
        #Option     "XvUseChromaKey"     	# [<bool>]
        #Option     "XvInsideChromaKey"  	# [<bool>]
        #Option     "XvYUVChromaKey"     	# [<bool>]
        #Option     "XvDisableColorKey"  	# [<bool>]
        #Option     "XvUseMemcpy"        	# [<bool>]
        #Option     "BenchmarkMemcpy"    	# [<bool>]
        #Option     "UseSSE"             	# [<bool>]
        #Option     "XvDefaultAdaptor"   	# <str>
        #Option     "ScaleLCD"           	# [<bool>]
        #Option     "CenterLCD"          	# [<bool>]
        #Option     "EnableHotkey"       	# [<bool>]
        #Option     "ForceCRT1VGAAspect" 	# <str>
        #Option     "ForceCRT2VGAAspect" 	# <str>
        #Option     "MergedFB"           	# [<str>]
        #Option     "TwinView"           	# [<str>]
        #Option     "MergedFBAuto"       	# [<bool>]
        #Option     "CRT2HSync"          	# <str>
        #Option     "SecondMonitorHorizSync" 	# <str>
        #Option     "CRT2VRefresh"       	# <str>
        #Option     "SecondMonitorVertRefresh" 	# <str>
        #Option     "CRT2Position"       	# <str>
        #Option     "TwinViewOrientation" 	# <str>
        #Option     "MetaModes"          	# <str>
        #Option     "MergedDPI"          	# <str>
        #Option     "MergedXinerama"     	# [<bool>]
        #Option     "TwinviewXineramaInfo" 	# [<bool>]
        #Option     "MergedXineramaCRT2IsScreen0" 	# [<bool>]
        #Option     "MergedNonRectangular" 	# [<bool>]
        #Option     "MergedMouseRestriction" 	# [<bool>]
	Identifier  "Card0"
	Driver      "sis"
	VendorName  "Silicon Integrated Systems [SiS]"
	BoardName   "630/730 PCI/AGP VGA Display Adapter"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection
xo alvvio restano gli stessi problemi ed inoltre come potrai notare mi e cambiata l impostazione della tastiera

Re: Risoluzione video

Inviato: venerdì 26 settembre 2008, 9:05
da Belo
Non pensavo fosse un impresa per esperti impostare una risoluzione video....