Pagina 1 di 1

Layout Finestra di Accesso

Inviato: venerdì 3 ottobre 2008, 20:20
da Jack Legend
Salve a tutti. Ho un problema: ho da poco installato nuovi driver per la scheda grafica nVidia GEFORCE 8300 GS. Ho un problema: quando accendo il pc e mi appare la finestra da accesso, qualcosa con la risoluzione non va, è piu grande la schermata rispetto al mio schermo. Ma poi quando ho effettuato l'accesso si rimette tutto a posto. Come mai?

Re: Layout Finestra di Accesso

Inviato: venerdì 3 ottobre 2008, 20:22
da giova
Le schede nvidia hanno sempre qualche problema.  Ti conviene guardare meglio nel forum.  Ci sono decine e decine di discussioni sul tema.

Re: Layout Finestra di Accesso

Inviato: venerdì 3 ottobre 2008, 20:23
da erbasox

Re: Layout Finestra di Accesso

Inviato: venerdì 3 ottobre 2008, 20:43
da Jack Legend
Ho provato a provare a fare quello ke c'era scritto nel topic. Qualcuno mi può dire cosa devo cambiare? Thanks
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by failsafeDexconf, using
# values from the debconf database and some overrides to use vesa mode.
#
# You should use dexconf or another such tool for creating a "real" xorg.conf
# For example:
#  sudo dpkg-reconfigure -phigh xserver-xorg

Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
SubSection "Display"
Depth 24
Virtual 1600 1200
Modes "1024x768@75" "1024x768@70" "832x624@75" "1024x768@60" "800x600@60" "1152x864@75" "800x600@75" "1280x1024@75" "800x600@72" "1280x960@60" "800x600@56" "1280x1024@60" "640x480@75" "1280x960@75" "640x480@72" "1400x1050@60" "640x480@60" "1600x1200@60"
EndSubSection
Option "AddARGBGLXVisuals" "True"
Defaultdepth 24
EndSection

Section "Device"
Identifier "Configured Video Device"
Boardname "NVIDIA GeForce 8 Series"
Busid "PCI:2:0:0"
Driver "nvidia"
Screen 0
Vendorname "NVIDIA"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
Option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection

Section "ServerLayout"
Identifier "Default Layout"
  screen 0 "Default Screen" 0 0
EndSection

Section "Module"
Load "glx"
Load "GLcore"
Load "v4l"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
Vendorname "Acer"
Modelname "Acer X192W"
Horizsync 31.0-80.0
Vertrefresh 56.0-75.0
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
  modeline  "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
  modeline  "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
  modeline  "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
  modeline  "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
  modeline  "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
  modeline  "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
Gamma 1.0
EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection