Forum Ubuntu-it

Bene, le porte sono aperte come da tutorial (60001 visto che non ci sono problemi,) ti invio la schermata dell'analizzatore di rete .
Ti faccio presente che le faccine sono sempre gialle. ciao. e grazie


Test starting
Testing routing for the following interfaces:
   wlan0/wlan0: 192.168.1.32
Can't run ping test as not supported
Can't run trace route test as not supported
0 NAT devices found
0 SOCKS proxys found
No HTTP proxy found
No explicit bind addresses
Testing HTTP outbound
   Test successful
Testing TCP outbound
   Test successful
Testing UDP outbound
   Test failed: Outbound test failed
Testing TCP port 22806 inbound
   Test failed: NAT test failed: Connect attempt to 95.232.245.215:22806 (your computer) timed out after 20 seconds. This means your port is probably closed
Testing UDP port 28641 inbound
   Sending outbound packet and waiting for reply probe (timeout=5000)
   Sending outbound packet and waiting for reply probe (timeout=10000)
   Sending outbound packet and waiting for reply probe (timeout=15000)
   Sending completion event
   Test failed: Inbound test failed
1 public/external addresses found
   95.232.245.215
   AS details: as=3269,asn=ASN-IBSNAZ Telecom Italia S.p.a., bgp_prefx=95.232.0.0/15[/95.232.0.0-/95.233.255.255]
Distributed protocol test
 Incoming routing established for 4DA73C936F54CF7498255C25B1D8802B229CC66A
 Searching 32 contacts for 8 test targets
 Making outbound connection to /212.83.122.98:65535
 Making outbound connection to /76.121.98.54:12801
 (LS 2) Outbound connect start
 Making outbound connection to /83.255.42.137:23134
 (LL 3) Outbound connect start
 Making outbound connection to /87.72.73.200:44430
 (LS 4) Outbound connect start
 (LL 1) Outbound connect start
 Making outbound connection to /115.80.173.248:37520
 (LS 2) Outbound connect success
 (LS 2) Outgoing message sent: BT_HANDSHAKE
 (LL 3) Outbound connect success
 (LL 3) Outgoing message sent: BT_HANDSHAKE
 (LL 5) Outbound connect start
 (LS 4) Outbound connect success
 (LL 1) Outbound connect success
 (LS 4) Outgoing message sent: BT_HANDSHAKE
 (LL 1) Outgoing message sent: BT_HANDSHAKE
 (LS 2) Incoming message received: BT_HANDSHAKE
 (LS 2) Incoming message received: BT_BITFIELD
 (LS 2) Outgoing message sent: BT_BITFIELD
 (LS 4) Incoming message received: BT_HANDSHAKE
 (LS 4) Incoming message received: BT_BITFIELD
 (LS 4) Outgoing message sent: BT_BITFIELD
 (LL 3) Incoming message received: BT_HANDSHAKE
 (LL 3) Incoming message received: BT_BITFIELD
 (LL 3) Outgoing message sent: BT_BITFIELD
 (LL 1) Incoming message received: BT_HANDSHAKE
 (LL 1) Incoming message received: BT_BITFIELD
 (LL 1) Outgoing message sent: BT_BITFIELD
 Making outbound connection to /201.58.31.67:16105
 (LS 6) Outbound connect start
 Making outbound connection to /122.146.132.123:9898
 Making outbound connection to /217.72.56.218:12074
 Making outbound connection to /84.101.168.45:14587
 (LS Outbound connect start
 (LL 9) Outbound connect start
 (LL 7) Outbound connect start
 (LS Outbound connect success

ti invio la pagina test della rete , per quanto riguarda le porte ho eseguito alla perfezione quello che mi hai detto. comunque vuze ora sta scaricando a velocità lenta circa 30kb forse bisogna settare nel miglior dei modi le opzioni.


Test startinig
Testing routing for the following interfaces:
    wlan0/wlan0: 192.168.1.32
Can't run ping test as not supported
Can't run trace route test as not supported
0 NAT devices found
0 SOCKS proxys found
No HTTP proxy found
No explicit bind addresses
Testing HTTP outbound
    Test successful
Testing TCP outbound
    Test successful
Testing UDP outbound
    Test failed: Outbound test failed
Testing TCP port 5000 inbound
    Test failed: NAT test failed: Connect attempt to 79.44.247.11:5000 (your computer) timed out after 20 seconds. This means your port is probably closed
Testing UDP port 5000 inbound
    Sending outbound packet and waiting for reply probe (timeout=5000)
    Sending outbound packet and waiting for reply probe (timeout=10000)
    Sending outbound packet and waiting for reply probe (timeout=15000)
    Sending completion event
    Test failed: Inbound test failed
1 public/external addresses found
    79.44.247

se posso permettermi un consiglio, anche se non strettamente legato al problema, ti consiglio di disattivare (o disinstallare proprio) il firewall. In condizioni normali, con Ubuntu, il firewall non serve a nulla e ti evita sbattimenti con l'apertura delle porte. Linux è molto più sicuro di Win, abituati a dimenticarti di firewall e antivirus Altro consiglio: vuze è pesante e non rende più di altri programmi simili, io rimarrei su Transmission (che non uso perchè mi ha dato noie..guarda caso proprio con le porte) oppure su Deluge (funzionante da subito, senza aprire/modificare nulla, provato su due pc con due modem diversi).

Ti invio lo stato della rete



Test starting
Testing routing for the following interfaces:
    wlan0/wlan0: 192.168.1.32
Can't run ping test as not supported
Can't run trace route test as not supported
0 NAT devices found
0 SOCKS proxys found
No HTTP proxy found
No explicit bind addresses
Testing HTTP outbound
    Test successful
Testing TCP outbound
    Test successful
Testing UDP outbound
    Test failed: Outbound test failed
Testing TCP port 5000 inbound
    Test failed: NAT test failed: Connect attempt to 79.44.247.11:5000 (your computer) timed out after 20 seconds. This means your port is probably closed
Testing UDP port 5000 inbound
    Sending outbound packet and waiting for reply probe (timeout=5000)
    Sending outbound packet and waiting for reply probe (timeout=10000)
    Sending outbound packet and waiting for reply probe (timeout=15000)

Ciao, per quanto riguarda le porte è tutto ok ho eseguito il tutorial ma non riesco a copiarti il resoconto della rete affinchè tu possa analizzarla./home/luciano/Scrivania/Schermata-Vuze  .png
Comunque vuze sta scaricando molto lentamente a circa 9kb circa credo che bisognera retificare le opzioni.