Pagina 1 di 1

Configurare Grub

Inviato: lunedì 27 dicembre 2010, 23:35
da Farfetch
buona sera! oggi ho finalmente comprato un secondo ssd per installare la piattaforma da gioco (sistema opertativo mi sembra eccessivo :P ) windows.
ho seguito la solita guida per ripristinare il grub, ma continuava a partire windows...
ovviamente mi ero dimenticato di settare l'ssd di ubuntu come quello di avvio. l'ho fatto, ma ora parte direttamente ubuntu...ho fatto

Codice: Seleziona tutto

update-grub
e ho così editato il file menu.lst

Codice: Seleziona tutto

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-legacy-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default		0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout		30

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title		Windows 95/98/NT/2000
# root		(hd0,0)
# makeactive
# chainloader	+1
#
# title		Linux
# root		(hd0,1)
# kernel	/vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=8E8E6BB28E6B918F ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=8E8E6BB28E6B918F

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
##      indomU=true
##      indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title		Ubuntu
uuid		8E8E6BB28E6B918F
kernel		/boot/vmlinuz-2.6.32-27-generic root=UUID=8E8E6BB28E6B918F ro quiet splash 
initrd		/boot/initrd.img-2.6.32-27-generic

title		Windows
root		(hd0,0)
makeactive
chainloader	+1

### END DEBIAN AUTOMAGIC KERNELS LIST
dove sbaglio???

Re: Configurare Grub

Inviato: lunedì 27 dicembre 2010, 23:51
da dadexix86
menu.lst? Che ubuntu hai installato? grub non usa più il menu.lst, ma il grub.cfg...

Re: Configurare Grub

Inviato: lunedì 27 dicembre 2010, 23:58
da Farfetch
che botta  (mad)
lo cancello menu.lst??

Re: Configurare Grub

Inviato: martedì 28 dicembre 2010, 0:00
da dadexix86
Prima dimmi che ubuntu hai installato :P

E poi per quel riguarda il restante problema hai dato un'occhiata alla wiki?

Re: Configurare Grub

Inviato: martedì 28 dicembre 2010, 0:01
da deegan
Posta il risultato di::

Codice: Seleziona tutto

lsb_release -a
 
e

Codice: Seleziona tutto

sudo fdisk -l 

Re: Configurare Grub

Inviato: martedì 28 dicembre 2010, 0:05
da Farfetch
si ubuntu è 10.04.1 (non c'è bisogno di "lsb_release -a" xD), cambiando il grub.cfg parte correttamente...
fdisk a che serve??  ???

Codice: Seleziona tutto

Disco /dev/sda: 60.0 GB, 60022480896 byte
255 testine, 63 settori/tracce, 7297 cilindri
Unità = cilindri di 16065 * 512 = 8225280 byte
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Identificativo disco: 0x8b1574bd

Dispositivo Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1          13      102400    7  HPFS/NTFS
La partizione 1 non termina al limite del cilindro.
/dev/sda2              13        7298    58510336    7  HPFS/NTFS

Disco /dev/sdb: 60.0 GB, 60022480896 byte
255 testine, 63 settori/tracce, 7297 cilindri
Unità = cilindri di 16065 * 512 = 8225280 byte
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Identificativo disco: 0x00031e9b

Dispositivo Boot      Start         End      Blocks   Id  System
/dev/sdb1   *           1        6994    56174592   83  Linux
/dev/sdb2            6994        7298     2438145    5  Esteso
/dev/sdb5            6994        7298     2438144   82  Linux swap / Solaris

Disco /dev/sdc: 1000.2 GB, 1000204886016 byte
255 testine, 63 settori/tracce, 121601 cilindri
Unità = cilindri di 16065 * 512 = 8225280 byte
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Identificativo disco: 0x00000000

Il disco /dev/sdc non contiene una tabella delle partizioni valida

Disco /dev/sdd: 1000.2 GB, 1000204886016 byte
255 testine, 63 settori/tracce, 121601 cilindri
Unità = cilindri di 16065 * 512 = 8225280 byte
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Identificativo disco: 0x00000000

Il disco /dev/sdd non contiene una tabella delle partizioni valida

Re: Configurare Grub

Inviato: mercoledì 29 dicembre 2010, 17:36
da Farfetch
mi spiegate cosa inserire per fare partire windows pls

Re: Configurare Grub

Inviato: venerdì 31 dicembre 2010, 14:09
da dadexix86
Dovrebbe riconoscerlo automaticamente quando dai

Codice: Seleziona tutto

sudo update-grub
Se non lo fa ci sono dei problemi con i dischi. io ho XP e la riga del grub.cfg che lo rileva è questa:

Codice: Seleziona tutto

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Microsoft Windows XP Home Edition (on /dev/sda1)" {
	insmod part_msdos
	insmod ntfs
	set root='(hd0,msdos1)'
	search --no-floppy --fs-uuid --set 7ec8a490c8a4486b
	drivemap -s (hd0) ${root}
	chainloader +1
}