Modifica partizioni hard disk
Modifica partizioni hard disk
Ciao,
avendo ubuntu sulla partizione /dev/sda1 e windows sulla /dev/sda2, è possibile scambiare le partizioni al fine di rendere primaria la partizione di windows senza dover formattare tutto?
Tale operazione si può fare con gparted?
Grazie
avendo ubuntu sulla partizione /dev/sda1 e windows sulla /dev/sda2, è possibile scambiare le partizioni al fine di rendere primaria la partizione di windows senza dover formattare tutto?
Tale operazione si può fare con gparted?
Grazie
- steff
- Moderatore Globale

- Messaggi: 40368
- Iscrizione: domenica 18 febbraio 2007, 19:48
- Desktop: LXQt+labwc
- Distribuzione: Arch; Debian; Ubuntu Server
- Sesso: Maschile
- Località: Toscana
- Contatti:
Re: Modifica partizioni hard disk
Sono entrambe primarie con quei numeri. Non vuole partire dalla seconda partizione?
Hai fatto un backup oggi? Ieri?? Quando???
La Documentazione da consultare e la FAQ sul uso del forum
Sistemi: LXQt - semplice, modulare e configurabile + *ubuntu in Vbox
La Documentazione da consultare e la FAQ sul uso del forum
Sistemi: LXQt - semplice, modulare e configurabile + *ubuntu in Vbox
Re: Modifica partizioni hard disk
Esattamente. Ho aperto un altro post e mi hanno suggerito, dopo alcuni tentativi, di aggiungere al file /boot/grub/menu.lst il codicesteff ha scritto: Sono entrambe primarie con quei numeri. Non vuole partire dalla seconda partizione?
Codice: Seleziona tutto
title Windows XP
map (hd0,0) (hd0,1)
map (hd0,1) (hd0,0)
rootnoverify (hd0,1)
makeactive
chainloader +1
boot
Il codice l ho inserito in FONDO al file in questione, come riportato.
Codice: Seleziona tutto
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 5
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=b2282e50-7335-48bf-9832-5670ac89b99a
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04, kernel 2.6.28-19-generic
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/vmlinuz-2.6.28-19-generic root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro quiet splash
initrd /boot/initrd.img-2.6.28-19-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-19-generic (recovery mode)
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/vmlinuz-2.6.28-19-generic root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro single
initrd /boot/initrd.img-2.6.28-19-generic
title Ubuntu 9.04, kernel 2.6.28-18-generic
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/vmlinuz-2.6.28-18-generic root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro quiet splash
initrd /boot/initrd.img-2.6.28-18-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-18-generic (recovery mode)
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/vmlinuz-2.6.28-18-generic root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro single
initrd /boot/initrd.img-2.6.28-18-generic
title Ubuntu 9.04, kernel 2.6.28-17-generic
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/vmlinuz-2.6.28-17-generic root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro quiet splash
initrd /boot/initrd.img-2.6.28-17-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-17-generic (recovery mode)
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/vmlinuz-2.6.28-17-generic root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro single
initrd /boot/initrd.img-2.6.28-17-generic
title Ubuntu 9.04, kernel 2.6.28-16-generic
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/vmlinuz-2.6.28-16-generic root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro quiet splash
initrd /boot/initrd.img-2.6.28-16-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-16-generic (recovery mode)
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/vmlinuz-2.6.28-16-generic root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro single
initrd /boot/initrd.img-2.6.28-16-generic
title Ubuntu 9.04, kernel 2.6.28-15-generic
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/vmlinuz-2.6.28-15-generic root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro quiet splash
initrd /boot/initrd.img-2.6.28-15-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-15-generic (recovery mode)
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/vmlinuz-2.6.28-15-generic root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro single
initrd /boot/initrd.img-2.6.28-15-generic
title Ubuntu 9.04, kernel 2.6.28-14-generic
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/vmlinuz-2.6.28-14-generic root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro quiet splash
initrd /boot/initrd.img-2.6.28-14-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-14-generic (recovery mode)
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/vmlinuz-2.6.28-14-generic root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro single
initrd /boot/initrd.img-2.6.28-14-generic
title Ubuntu 9.04, kernel 2.6.28-11-generic
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro single
initrd /boot/initrd.img-2.6.28-11-generic
title Ubuntu 9.04, memtest86+
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/memtest86+.bin
quiet
title Windows XP
map (hd0,0) (hd0,1)
map (hd0,1) (hd0,0)
rootnoverify (hd0,1)
makeactive
chainloader +1
boot
### END DEBIAN AUTOMAGIC KERNELS LIST
Grazie
- steff
- Moderatore Globale

- Messaggi: 40368
- Iscrizione: domenica 18 febbraio 2007, 19:48
- Desktop: LXQt+labwc
- Distribuzione: Arch; Debian; Ubuntu Server
- Sesso: Maschile
- Località: Toscana
- Contatti:
Re: Modifica partizioni hard disk
Non so se grub supporta il mapping delle partizioni, di solito si usa per dischi.
Ma una volta mappata non dovrebbe essere così?
rootnoverify (hd0,0)
Ma una volta mappata non dovrebbe essere così?
rootnoverify (hd0,0)
Hai fatto un backup oggi? Ieri?? Quando???
La Documentazione da consultare e la FAQ sul uso del forum
Sistemi: LXQt - semplice, modulare e configurabile + *ubuntu in Vbox
La Documentazione da consultare e la FAQ sul uso del forum
Sistemi: LXQt - semplice, modulare e configurabile + *ubuntu in Vbox
Re: Modifica partizioni hard disk
non so...ora provo a modificare la stringa e riavviaresteff ha scritto: Non so se grub supporta il mapping delle partizioni, di solito si usa per dischi.
Ma una volta mappata non dovrebbe essere così?
rootnoverify (hd0,0)
Re: Modifica partizioni hard disk
NIente da fare...non va neanche modificandolo così...steff ha scritto: Non so se grub supporta il mapping delle partizioni, di solito si usa per dischi.
Ma una volta mappata non dovrebbe essere così?
rootnoverify (hd0,0)
Da quanto mi hai datto, ho installato win su una PARTIZIONE PRIMARIA (/dev/sda2)?
Perchè mi hanno detto il contrario e probabilmente non riesco a settare il dual boot proprio per questo motivo.
Alcuni mi hanno suggerito di mettere win su /dev/sda1...
Ciò significa formattare nuovamente tutto e fare le partizioni giuste per win e ubuntu del disco con gparted >:(
- steff
- Moderatore Globale

- Messaggi: 40368
- Iscrizione: domenica 18 febbraio 2007, 19:48
- Desktop: LXQt+labwc
- Distribuzione: Arch; Debian; Ubuntu Server
- Sesso: Maschile
- Località: Toscana
- Contatti:
Re: Modifica partizioni hard disk
Il sistema di ubuntu potresti copiare su una altra partizione, volendo. Posta una schermata di gparted
Hai fatto un backup oggi? Ieri?? Quando???
La Documentazione da consultare e la FAQ sul uso del forum
Sistemi: LXQt - semplice, modulare e configurabile + *ubuntu in Vbox
La Documentazione da consultare e la FAQ sul uso del forum
Sistemi: LXQt - semplice, modulare e configurabile + *ubuntu in Vbox
Re: Modifica partizioni hard disk
Non riesco a postartela adesso. ll disco è da 80 GBsteff ha scritto: Il sistema di ubuntu potresti copiare su una altra partizione, volendo. Posta una schermata di gparted
/dev/sda2 ntfs win 22.50GB (di cui 2.62 utilizzati) boot
oltre alla partizione di ubuntu:
/dev/sda1 ext3 49.16GB (di cui 39.97 utilizzati)
e quella di swap /dev/sda3
- steff
- Moderatore Globale

- Messaggi: 40368
- Iscrizione: domenica 18 febbraio 2007, 19:48
- Desktop: LXQt+labwc
- Distribuzione: Arch; Debian; Ubuntu Server
- Sesso: Maschile
- Località: Toscana
- Contatti:
Re: Modifica partizioni hard disk
Non è possibile che windows abbi solo 2gb, il minimo che occupa sono 6 credo.
Non c'è spazio per copiare ubuntu, se non hai un altro disco.
Non c'è spazio per copiare ubuntu, se non hai un altro disco.
Hai fatto un backup oggi? Ieri?? Quando???
La Documentazione da consultare e la FAQ sul uso del forum
Sistemi: LXQt - semplice, modulare e configurabile + *ubuntu in Vbox
La Documentazione da consultare e la FAQ sul uso del forum
Sistemi: LXQt - semplice, modulare e configurabile + *ubuntu in Vbox
Re: Modifica partizioni hard disk
Non so cosa dirti...lo spazio occupato è quello che si legge dalla schermata di gparted...steff ha scritto: Non è possibile che windows abbi solo 2gb, il minimo che occupa sono 6 credo.
Non c'è spazio per copiare ubuntu, se non hai un altro disco.
Ad ogni modo non ho ancora risolto questo problema..
Non sai da cosa potrebbe dipendere? Se formatassi tutto l'hard disk e partizionassi in modo tale da avere win in /dev/sda1 avrei ancora problemi nella configurazione dual boot del grub?
Ho letto (MA TI CHIEDO CONFERMA) che la partizione /dev/sda2 è ancora PRIMARIA, comunque.
- steff
- Moderatore Globale

- Messaggi: 40368
- Iscrizione: domenica 18 febbraio 2007, 19:48
- Desktop: LXQt+labwc
- Distribuzione: Arch; Debian; Ubuntu Server
- Sesso: Maschile
- Località: Toscana
- Contatti:
Re: Modifica partizioni hard disk
Confermo. Non so dirti niente su windows, ma credo che sia corrotto, se accedi a sda2 dal cd live vedi tutti i file del sistema? per vedere il tipo di partizione
Codice: Seleziona tutto
sudo parted -l Hai fatto un backup oggi? Ieri?? Quando???
La Documentazione da consultare e la FAQ sul uso del forum
Sistemi: LXQt - semplice, modulare e configurabile + *ubuntu in Vbox
La Documentazione da consultare e la FAQ sul uso del forum
Sistemi: LXQt - semplice, modulare e configurabile + *ubuntu in Vbox
Re: Modifica partizioni hard disk
Ho controllato con il live cd e penso che sia tutto ok. Riesco ad accedere alla partizione sda2 e vedere eventualmente i file system.steff ha scritto: Confermo. Non so dirti niente su windows, ma credo che sia corrotto, se accedi a sda2 dal cd live vedi tutti i file del sistema?per vedere il tipo di partizioneCodice: Seleziona tutto
sudo parted -l
Penso che non dipenda da windows il fatto di non riuscire ad impostare il dual boot.
Ad ogni modo ha fatto un altro tentativo ed ho provato a modificare il contenuto del file /boot/grub/menu.lst (è il file di impostazione del grub), aggiungendo la seguente istruzione IN CIMA alle immagini del mio kernel:
Codice: Seleziona tutto
title Windows XP
map (hd0,0) (hd0,1)
map (hd0,1) (hd0,0)
rootnoverify (hd0,0)
makeactive
chainloader +1
boot
Codice: Seleziona tutto
menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 5
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=b2282e50-7335-48bf-9832-5670ac89b99a
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Windows XP
map (hd0,0) (hd0,1)
map (hd0,1) (hd0,0)
rootnoverify (hd0,0)
makeactive
chainloader +1
boot
title Ubuntu 9.04, kernel 2.6.28-19-generic
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/vmlinuz-2.6.28-19-generic root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro quiet splash
initrd /boot/initrd.img-2.6.28-19-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-19-generic (recovery mode)
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/vmlinuz-2.6.28-19-generic root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro single
initrd /boot/initrd.img-2.6.28-19-generic
title Ubuntu 9.04, kernel 2.6.28-18-generic
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/vmlinuz-2.6.28-18-generic root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro quiet splash
initrd /boot/initrd.img-2.6.28-18-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-18-generic (recovery mode)
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/vmlinuz-2.6.28-18-generic root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro single
initrd /boot/initrd.img-2.6.28-18-generic
title Ubuntu 9.04, kernel 2.6.28-17-generic
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/vmlinuz-2.6.28-17-generic root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro quiet splash
initrd /boot/initrd.img-2.6.28-17-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-17-generic (recovery mode)
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/vmlinuz-2.6.28-17-generic root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro single
initrd /boot/initrd.img-2.6.28-17-generic
title Ubuntu 9.04, kernel 2.6.28-16-generic
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/vmlinuz-2.6.28-16-generic root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro quiet splash
initrd /boot/initrd.img-2.6.28-16-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-16-generic (recovery mode)
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/vmlinuz-2.6.28-16-generic root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro single
initrd /boot/initrd.img-2.6.28-16-generic
title Ubuntu 9.04, kernel 2.6.28-15-generic
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/vmlinuz-2.6.28-15-generic root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro quiet splash
initrd /boot/initrd.img-2.6.28-15-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-15-generic (recovery mode)
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/vmlinuz-2.6.28-15-generic root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro single
initrd /boot/initrd.img-2.6.28-15-generic
title Ubuntu 9.04, kernel 2.6.28-14-generic
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/vmlinuz-2.6.28-14-generic root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro quiet splash
initrd /boot/initrd.img-2.6.28-14-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-14-generic (recovery mode)
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/vmlinuz-2.6.28-14-generic root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro single
initrd /boot/initrd.img-2.6.28-14-generic
title Ubuntu 9.04, kernel 2.6.28-11-generic
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=b2282e50-7335-48bf-9832-5670ac89b99a ro single
initrd /boot/initrd.img-2.6.28-11-generic
title Ubuntu 9.04, memtest86+
uuid b2282e50-7335-48bf-9832-5670ac89b99a
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
ERROR 13: INVALID OR UNSUPPORTED EXECUTABLE FORMAT
Ultima modifica di fotia il lunedì 17 gennaio 2011, 10:50, modificato 1 volta in totale.
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 9 ospiti