Pagina 3 di 3

Re: problema istallazione

Inviato: domenica 23 gennaio 2011, 21:46
da Alka-Seltzer PLUS
Avvialo da terminale e riportane l' output :)

Re: problema istallazione

Inviato: martedì 25 gennaio 2011, 0:10
da LikEaWolf
Ecco qui
giancarlo@giancarlo-HP-Pavilion-dv6-Notebook-PC:~$ zsnes
ZSNES v1.51, (c) 1997-2007, ZSNES Team
Be sure to check http://www.zsnes.com/ for the latest version.

ZSNES is written by the ZSNES Team (See AUTHORS.TXT)
ZSNES comes with ABSOLUTELY NO WARRANTY.  This is free software,
and you are welcome to redistribute it under certain conditions;
please read 'LICENSE.TXT' thoroughly before doing so.

Use ZSNES -? for command line definitions.

Starting Mouse detection.
Unable to poll /dev/input/event11. Make sure you have read permissions to it.
Unable to poll /dev/input/event10. Make sure you have read permissions to it.
Unable to poll /dev/input/event7. Make sure you have read permissions to it.
Unable to poll /dev/input/event6. Make sure you have read permissions to it.
Unable to poll /dev/input/event5. Make sure you have read permissions to it.
Unable to poll /dev/input/event4. Make sure you have read permissions to it.
Unable to poll /dev/input/event3. Make sure you have read permissions to it.
Unable to poll /dev/input/event2. Make sure you have read permissions to it.
Unable to poll /dev/input/event1. Make sure you have read permissions to it.
Unable to poll /dev/input/event0. Make sure you have read permissions to it.
ManyMouse: 0 mice detected.
Errore di segmentazione
giancarlo@giancarlo-HP-Pavilion-dv6-Notebook-PC:~$

Re: problema istallazione

Inviato: martedì 25 gennaio 2011, 2:04
da Alka-Seltzer PLUS
prova con ( qui lo dico e qui lo nego ) :

Codice: Seleziona tutto

sudo sh -c 'echo "default_driver=alsa" > /etc/libao.conf'

Re: problema istallazione

Inviato: martedì 25 gennaio 2011, 2:41
da LikEaWolf
Il comando nn ha prodotto risultati
giancarlo@giancarlo-HP-Pavilion-dv6-Notebook-PC:~$ sudo sh -c 'echo "default_driver=alsa" > /etc/libao.conf'
[sudo] password for giancarlo:
giancarlo@giancarlo-HP-Pavilion-dv6-Notebook-PC:~$

Re: problema istallazione

Inviato: martedì 25 gennaio 2011, 3:14
da Alka-Seltzer PLUS
Hai già provato ad avviare il gioco da terminale ?

Re: problema istallazione

Inviato: martedì 25 gennaio 2011, 18:39
da LikEaWolf
si mi dice errore di segmentazione

Re: problema istallazione

Inviato: martedì 25 gennaio 2011, 18:47
da Alka-Seltzer PLUS
Riporta tutto in codice ( usa il cancelletto # invece della citazione ) (yes)

Re: problema istallazione

Inviato: martedì 25 gennaio 2011, 18:49
da LikEaWolf
INTENDEVI COSI?
giancarlo@giancarlo-HP-Pavilion-dv6-Notebook-PC:~$ zsnes
ZSNES v1.51, (c) 1997-2007, ZSNES Team
Be sure to check http://www.zsnes.com/ for the latest version.

ZSNES is written by the ZSNES Team (See AUTHORS.TXT)
ZSNES comes with ABSOLUTELY NO WARRANTY.  This is free software,
and you are welcome to redistribute it under certain conditions;
please read 'LICENSE.TXT' thoroughly before doing so.

Use ZSNES -? for command line definitions.

Starting Mouse detection.
Unable to poll /dev/input/event11. Make sure you have read permissions to it.
Unable to poll /dev/input/event8. Make sure you have read permissions to it.
Unable to poll /dev/input/event7. Make sure you have read permissions to it.
Unable to poll /dev/input/event6. Make sure you have read permissions to it.
Unable to poll /dev/input/event5. Make sure you have read permissions to it.
Unable to poll /dev/input/event4. Make sure you have read permissions to it.
Unable to poll /dev/input/event3. Make sure you have read permissions to it.
Unable to poll /dev/input/event2. Make sure you have read permissions to it.
Unable to poll /dev/input/event1. Make sure you have read permissions to it.
Unable to poll /dev/input/event0. Make sure you have read permissions to it.
ManyMouse: 0 mice detected.
Errore di segmentazione
giancarlo@giancarlo-HP-Pavilion-dv6-Notebook-PC:~$

Re: problema istallazione

Inviato: martedì 25 gennaio 2011, 18:56
da Alka-Seltzer PLUS
Per quanto riguarda l'output sì mentre per come lo hai riportato no :)

prova a lanciarlo così:

Codice: Seleziona tutto

zsnes -ad sdl

Re: problema istallazione

Inviato: martedì 25 gennaio 2011, 23:59
da LikEaWolf
Cosi e' partito

giancarlo@giancarlo-HP-Pavilion-dv6-Notebook-PC:~$ zsnes -ad sdl
ZSNES v1.51, (c) 1997-2007, ZSNES Team
Be sure to check http://www.zsnes.com/ for the latest version.

ZSNES is written by the ZSNES Team (See AUTHORS.TXT)
ZSNES comes with ABSOLUTELY NO WARRANTY.  This is free software,
and you are welcome to redistribute it under certain conditions;
please read 'LICENSE.TXT' thoroughly before doing so.

Use ZSNES -? for command line definitions.

Starting Mouse detection.
Unable to poll /dev/input/event7. Make sure you have read permissions to it.
Unable to poll /dev/input/event11. Make sure you have read permissions to it.
Unable to poll /dev/input/event8. Make sure you have read permissions to it.
Unable to poll /dev/input/event6. Make sure you have read permissions to it.
Unable to poll /dev/input/event5. Make sure you have read permissions to it.
Unable to poll /dev/input/event4. Make sure you have read permissions to it.
Unable to poll /dev/input/event3. Make sure you have read permissions to it.
Unable to poll /dev/input/event2. Make sure you have read permissions to it.
Unable to poll /dev/input/event1. Make sure you have read permissions to it.
Unable to poll /dev/input/event0. Make sure you have read permissions to it.
ManyMouse: 0 mice detected.

Audio Opened.
Driver: Simple DirectMedia Layer output
Channels: 2
Rate: 32000

Device 0 ST LIS3LV02DL Accelerometer
 3 axis, 0 buttons, 0 hats, 0 balls
ma ora mi chiedo
dovro avviarlo sempre cosi o e'  risolto una volta e per tutte o quando riavvio risuccedera'?