Pagina 1 di 1
Capire il log di GSmartControl
Inviato: venerdì 28 ottobre 2011, 19:48
da basic
Ciau ^^ come da titolo vorrei comprendere meglio il log creato dal performad-test esteso di GSmartControl, infatti in quello corto sembrava tutto ok, come da lettura dei dati diretti smart (oltre i 13 settori ricollocati), ma facendo il test lungo il risultato sembra negativo, lo è? e quanto?
Il test è fatto su un notebook di 10 anni con Xubuntu 10.10 lo fatto perchè alcuni file scaricati dal web erano corrotti, ma non so se è dovuto all'HD o connessione.
Se fosse a causa dell'HD cosa mi consigliate... di utilizzare un tool per riparare le falle o meglio fare un formattazione "lenta" o l'HD è irrecuperabile?
Ciao e grazie
Ecco il log:
Codice: Seleziona tutto
smartctl 5.40 2010-03-16 r3077 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: HITACHI Travelstar DK23XX/DK23XXB series
Device Model: HITACHI_DK23EA-20
Serial Number: 2P8304
Firmware Version: 00K5A0F0
User Capacity: 20,003,880,960 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 5
ATA Standard is: ATA/ATAPI-5 T13 1321D revision 3
Local Time is: Fri Oct 28 14:32:49 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 119) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 940) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 16) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000d 100 100 050 Pre-fail Offline - 8589934595
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 3938
3 Spin_Up_Time 0x0007 100 100 050 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 096 096 000 Old_age Always - 4950
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 13
7 Seek_Error_Rate 0x000f 100 100 050 Pre-fail Always - 759
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 1203
9 Power_On_Minutes 0x0032 087 087 000 Old_age Always - 6644h+25m
10 Spin_Retry_Count 0x0013 100 100 050 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 096 096 000 Old_age Always - 4943
191 G-Sense_Error_Rate 0x000a 100 099 000 Old_age Always - 96
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 17
193 Load_Cycle_Count 0x0032 072 072 000 Old_age Always - 169768/169750
194 Temperature_Celsius 0x0022 100 070 000 Old_age Always - 31 (Lifetime Min/Max 13/55)
195 Hardware_ECC_Recovered 0x001a 100 005 000 Old_age Always - 4553
196 Reallocated_Event_Count 0x0032 099 099 000 Old_age Always - 13
197 Current_Pending_Sector 0x0032 100 097 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0012 100 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x0012 100 100 000 Old_age Always - 0
223 Load_Retry_Count 0x0012 100 100 000 Old_age Always - 0
230 Head_Amplitude 0x0032 090 090 000 Old_age Always - 312123
250 Read_Error_Retry_Rate 0x000a 100 040 000 Old_age Always - 241
SMART Error Log Version: 1
ATA Error Count: 3865 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 3865 occurred at disk power-on lifetime: 6642 hours (276 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 04 64 0c 60 e0 Error: IDNF 4 sectors at LBA = 0x00600c64 = 6294628
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 60 0c 60 e0 00 02:33:49.600 READ DMA
f8 00 00 00 00 00 e0 00 02:33:49.600 READ NATIVE MAX ADDRESS
ec 00 00 00 00 00 a0 02 02:33:49.590 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 02 02:33:49.590 SET FEATURES [Set transfer mode]
f8 00 00 00 00 00 e0 00 02:33:49.590 READ NATIVE MAX ADDRESS
Error 3864 occurred at disk power-on lifetime: 6642 hours (276 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 04 64 0c 60 e0 Error: IDNF 4 sectors at LBA = 0x00600c64 = 6294628
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 60 0c 60 e0 00 02:33:47.480 READ DMA
f8 00 00 00 00 00 e0 00 02:33:47.480 READ NATIVE MAX ADDRESS
ec 00 00 00 00 00 a0 02 02:33:47.470 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 02 02:33:47.460 SET FEATURES [Set transfer mode]
f8 00 00 00 00 00 e0 00 02:33:47.460 READ NATIVE MAX ADDRESS
Error 3863 occurred at disk power-on lifetime: 6642 hours (276 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 04 64 0c 60 e0 Error: IDNF 4 sectors at LBA = 0x00600c64 = 6294628
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 60 0c 60 e0 00 02:33:45.390 READ DMA
f8 00 00 00 00 00 e0 00 02:33:45.390 READ NATIVE MAX ADDRESS
ec 00 00 00 00 00 a0 02 02:33:45.380 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 02 02:33:45.370 SET FEATURES [Set transfer mode]
f8 00 00 00 00 00 e0 00 02:33:45.370 READ NATIVE MAX ADDRESS
Error 3862 occurred at disk power-on lifetime: 6642 hours (276 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 04 64 0c 60 e0 Error: IDNF 4 sectors at LBA = 0x00600c64 = 6294628
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 60 0c 60 e0 00 02:33:43.290 READ DMA
f8 00 00 00 00 00 e0 00 02:33:43.290 READ NATIVE MAX ADDRESS
ec 00 00 00 00 00 a0 02 02:33:43.280 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 02 02:33:43.270 SET FEATURES [Set transfer mode]
f8 00 00 00 00 00 e0 00 02:33:43.270 READ NATIVE MAX ADDRESS
Error 3861 occurred at disk power-on lifetime: 6642 hours (276 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 04 64 0c 60 e0 Error: IDNF 4 sectors at LBA = 0x00600c64 = 6294628
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 60 0c 60 e0 00 02:33:41.200 READ DMA
f8 00 00 00 00 00 e0 00 02:33:41.200 READ NATIVE MAX ADDRESS
ec 00 00 00 00 00 a0 02 02:33:41.190 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 02 02:33:41.190 SET FEATURES [Set transfer mode]
f8 00 00 00 00 00 e0 00 02:33:41.190 READ NATIVE MAX ADDRESS
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 70% 6644 0
# 2 Short offline Completed without error 00% 6644 -
# 3 Short offline Completed without error 00% 6633 -
# 4 Short offline Aborted by host 60% 6631 -
# 5 Short offline Aborted by host 60% 6457 -
# 6 Short offline Aborted by host 60% 6451 -
# 7 Short offline Aborted by host 60% 6450 -
Device does not support Selective Self Tests/Logging
Re: Capire il log di GSmartControl
Inviato: sabato 29 ottobre 2011, 1:58
da cristian_c
Re: Capire il log di GSmartControl
Inviato: martedì 4 novembre 2014, 16:26
da jset
Salve,
riapro la discussione per chiedere un aiuto per la comprensione del log di GSmartControl.
Dopo alcuni problemi di perdita dati ed errori di sistema, mi e' venuto il dubbio che l'hard disk possa essere rovinato.
Ho letto la guida su linuxjournal e ci sono errori nella sezione 4 del log. Il problema e' che il test si interrompe al 10% a causa di un errore di lettura.
Posso considerare l'hard disk andato?
Re: Capire il log di GSmartControl
Inviato: martedì 4 novembre 2014, 19:04
da jset
In questo modo e' piu' agevole guardarlo
Codice: Seleziona tutto
smartctl 6.2 2013-07-26 r3841 [i686-linux-3.13.0-32-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Travelstar 5K320
Device Model: Hitachi HTS543225L9SA00
Serial Number: 081220FB2E00LKKL023A
LU WWN Device Id: 5 000cca 55ff27572
Firmware Version: FBEOC43C
User Capacity: 250,059,350,016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 3f
SATA Version is: SATA 2.6, 1.5 Gb/s
Local Time is: Tue Nov 4 15:10:34 2014 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 645) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 102) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 080 080 062 Pre-fail Always - 12386888
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 253 253 033 Pre-fail Always - 0
4 Start_Stop_Count 0x0012 098 098 000 Old_age Always - 4391
5 Reallocated_Sector_Ct 0x0033 088 088 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 090 090 000 Old_age Always - 4435
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 3562
191 G-Sense_Error_Rate 0x000a 098 098 000 Old_age Always - 131074
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 31
193 Load_Cycle_Count 0x0012 098 098 000 Old_age Always - 24641
194 Temperature_Celsius 0x0002 177 177 000 Old_age Always - 31 (Min/Max 11/46)
196 Reallocated_Event_Count 0x0032 093 093 000 Old_age Always - 761
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 410
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 78 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 78 occurred at disk power-on lifetime: 4425 hours (184 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 09 0b 01 3c e8 Error: UNC 9 sectors at LBA = 0x083c010b = 138150155
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 14 00 01 3c e0 00 00:00:11.500 READ DMA EXT
25 00 26 1a e0 3b e0 00 00:00:11.400 READ DMA EXT
25 00 1a 00 e0 3b e0 00 00:00:08.200 READ DMA EXT
25 00 25 db df 3b e0 00 00:00:08.000 READ DMA EXT
25 00 1b c0 df 3b e0 00 00:00:08.000 READ DMA EXT
Error 77 occurred at disk power-on lifetime: 4398 hours (183 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 03 45 75 7b e1 Error: UNC 3 sectors at LBA = 0x017b7545 = 24868165
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 40 75 7b e0 08 00:36:31.600 READ DMA EXT
ef 10 02 00 00 00 a0 08 00:36:31.600 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 08 00:36:31.600 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 08 00:36:31.600 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 00:36:31.600 SET FEATURES [Set transfer mode]
Error 76 occurred at disk power-on lifetime: 4398 hours (183 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 03 45 75 7b e1 Error: UNC 3 sectors at LBA = 0x017b7545 = 24868165
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 40 75 7b e0 08 00:36:27.400 READ DMA EXT
c8 00 08 f8 1f d1 e1 08 00:36:27.300 READ DMA
c8 00 08 f0 1f d1 e1 08 00:36:27.300 READ DMA
c8 00 08 e8 1f d1 e1 08 00:36:27.300 READ DMA
c8 00 08 e0 1f d1 e1 08 00:36:27.300 READ DMA
Error 75 occurred at disk power-on lifetime: 4398 hours (183 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 03 45 75 7b e1 Error: UNC 3 sectors at LBA = 0x017b7545 = 24868165
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 40 75 7b e0 08 00:36:22.900 READ DMA EXT
35 00 08 60 67 43 e0 08 00:36:22.900 WRITE DMA EXT
ea 00 00 00 00 00 a0 08 00:36:22.700 FLUSH CACHE EXT
35 00 08 00 e1 7b e0 08 00:36:22.700 WRITE DMA EXT
35 00 08 88 e0 7b e0 08 00:36:22.700 WRITE DMA EXT
Error 74 occurred at disk power-on lifetime: 4398 hours (183 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 03 45 75 7b e1 Error: UNC 3 sectors at LBA = 0x017b7545 = 24868165
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 40 75 7b e0 08 00:36:18.600 READ DMA EXT
35 00 08 50 e1 3b e0 08 00:36:18.600 WRITE DMA EXT
35 00 10 18 e1 3b e0 08 00:36:18.600 WRITE DMA EXT
35 00 10 40 26 7d e0 08 00:36:18.600 WRITE DMA EXT
35 00 08 60 04 7c e0 08 00:36:18.600 WRITE DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 4435 310799458
# 2 Extended offline Completed: read failure 90% 4431 316347238
# 3 Short offline Completed without error 00% 4430 -
# 4 Extended offline Completed: read failure 90% 4430 301932813
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Re: Capire il log di GSmartControl
Inviato: giovedì 1 gennaio 2015, 14:24
da cristian_c
Da uno dei commenti al link che avevo postato:
Your disk has one or more unreadable sectors. This does NOT mean that the disk is failing, but it has lost some information on those sectors. Run an extended self test:
smartctl -t long /dev/hda (PATA disk)
smartctl -t long -d ata /dev/sda (SATA disk)
Re: Capire il log di GSmartControl
Inviato: sabato 11 febbraio 2017, 10:13
da Kioji
Grazie a chi mi aiuta a capire:
questo è un hd che uso per backup... quindi mi serve un certo grado di sicurezza.
Copio ed incollo qui il logo del test:
Codice: Seleziona tutto
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.11
Device Model: ST31500341AS
Serial Number: 9VS42GLM
LU WWN Device Id: 5 000c50 02085cc05
Firmware Version: CC1H
User Capacity: 1,500,301,910,016 bytes [1.50 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Sat Feb 11 10:06:01 2017 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 617) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 296) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 120 099 006 Pre-fail Always - 238461856
3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 224
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 11
7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 78520359
9 Power_On_Hours 0x0032 078 078 000 Old_age Always - 19488
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always - 274
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 5
189 High_Fly_Writes 0x003a 092 092 000 Old_age Always - 8
190 Airflow_Temperature_Cel 0x0022 063 049 045 Old_age Always - 37 (Min/Max 20/38)
194 Temperature_Celsius 0x0022 037 051 000 Old_age Always - 37 (0 14 0 0 0)
195 Hardware_ECC_Recovered 0x001a 035 021 000 Old_age Always - 238461856
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 19484 (124 153 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 4008748248
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 253695607
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 19488 -
# 2 Short offline Completed without error 00% 19466 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
tra gli attributes il " 5 Reallocated_Sector_" mi compare evidenziato.... che vuol dire?