Forum Ubuntu-it

[img]http://[img]http://www.imagehost.it/dm/LILT/Schermata%20del%202012-03-22%2018:15:27.png[/img][/img]

Mi si è appena riavviato, sempre 2 volte, e la ventola continua ad andare! Cosa posso fare?

[img width=800 height=449]http://www.imagehost.it/di/UHUF/Scherma ... :15:27.png[/img]

Mi si è appena riavviato, sempre 2 volte, e la ventola continua ad andare! Cosa posso fare?

dai
dmesg
posta le parti relative ad errori

Codice: Seleziona tutto

[  163.936192] wlan0: RX ReassocResp from 00:04:ed:9d:dd:6e (capab=0x411 status=0 aid=1)
[  163.936201] wlan0: associated
[  167.322961] wlan0: deauthenticated from 00:04:ed:9d:dd:6e (Reason: 1)
[  167.452423] cfg80211: All devices are disconnected, going to restore regulatory settings
[  167.452438] cfg80211: Restoring regulatory settings
[  167.452448] cfg80211: Calling CRDA to update world regulatory domain
[  167.459047] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[  167.459058] cfg80211: World regulatory domain updated:
[  167.459065] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  167.459074] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  167.459083] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  167.459092] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  167.459100] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  167.459110] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  168.610970] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[  168.615402] wlan0: authenticated
[  168.635180] wlan0: associate with 00:04:ed:9d:dd:6e (try 1)
[  168.637703] wlan0: RX ReassocResp from 00:04:ed:9d:dd:6e (capab=0x411 status=0 aid=1)
[  168.637712] wlan0: associated
[  180.850471] wlan0: no IPv6 routers present
[  240.363816] cfg80211: All devices are disconnected, going to restore regulatory settings
[  240.363828] cfg80211: Restoring regulatory settings
[  240.363836] cfg80211: Calling CRDA to update world regulatory domain
[  240.370741] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[  240.370750] cfg80211: World regulatory domain updated:
[  240.370755] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  240.370762] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  240.370768] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  240.370774] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  240.370779] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  240.370785] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  241.516298] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[  241.716700] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 2)
[  241.916530] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 3)
[  242.116348] wlan0: authentication with 00:04:ed:9d:dd:6e timed out
[  248.201839] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[  248.399217] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 2)
[  248.599069] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 3)
[  248.798877] wlan0: authentication with 00:04:ed:9d:dd:6e timed out
[  254.923389] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 1/3)
[  255.121739] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 2/3)
[  255.321543] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 3/3)
[  255.521376] wlan0: direct probe to 00:04:ed:9d:dd:6e timed out
[  261.618496] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 1/3)
[  261.816210] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 2/3)
[  262.016059] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 3/3)
[  262.215888] wlan0: direct probe to 00:04:ed:9d:dd:6e timed out
[  268.360841] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 1/3)
[  268.559331] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 2/3)
[  268.759293] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 3/3)
[  268.959223] wlan0: direct probe to 00:04:ed:9d:dd:6e timed out
[  275.030703] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 1/3)
[  275.229222] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 2/3)
[  275.429154] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 3/3)
[  275.629095] wlan0: direct probe to 00:04:ed:9d:dd:6e timed out
[  281.768630] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 1/3)
[  281.967075] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 2/3)
[  282.167005] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 3/3)
[  282.366930] wlan0: direct probe to 00:04:ed:9d:dd:6e timed out
[  288.430493] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 1/3)
[  288.628932] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 2/3)
[  288.631727] wlan0: direct probe responded
[  288.696919] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[  288.896895] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 2)
[  289.096783] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 3)
[  289.296723] wlan0: authentication with 00:04:ed:9d:dd:6e timed out
[  295.392388] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 1/3)
[  295.590739] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 2/3)
[  295.790651] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 3/3)
[  295.990648] wlan0: direct probe to 00:04:ed:9d:dd:6e timed out
[  302.094921] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[  302.292586] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 2)
[  302.492524] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 3)
[  302.692477] wlan0: authentication with 00:04:ed:9d:dd:6e timed out
[  308.829062] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 1/3)
[  309.026448] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 2/3)
[  309.226376] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 3/3)
[  309.426323] wlan0: direct probe to 00:04:ed:9d:dd:6e timed out
[  315.534830] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 1/3)
[  315.732342] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 2/3)
[  315.932264] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 3/3)
[  316.132198] wlan0: direct probe to 00:04:ed:9d:dd:6e timed out
[ 4051.652236] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[ 4051.654752] wlan0: authenticated
[ 4051.673521] wlan0: associate with 00:04:ed:9d:dd:6e (try 1)
[ 4051.677078] wlan0: RX ReassocResp from 00:04:ed:9d:dd:6e (capab=0x411 status=0 aid=2)
[ 4051.677081] wlan0: associated
[ 4062.387099] wlan0: no IPv6 routers present
[ 9358.000820] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 9358.000833] cfg80211: Restoring regulatory settings
[ 9358.000864] cfg80211: Calling CRDA to update world regulatory domain
[ 9358.008073] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[ 9358.008082] cfg80211: World regulatory domain updated:
[ 9358.008087] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9358.008094] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9358.008101] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9358.008106] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9358.008112] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9358.008139] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9359.149249] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[ 9359.293247] wlan0: authenticated
[ 9359.312085] wlan0: associate with 00:04:ed:9d:dd:6e (try 1)
[ 9359.511710] wlan0: associate with 00:04:ed:9d:dd:6e (try 2)
[ 9359.711692] wlan0: associate with 00:04:ed:9d:dd:6e (try 3)
[ 9359.911559] wlan0: association with 00:04:ed:9d:dd:6e timed out
[ 9420.265895] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[ 9420.281543] wlan0: authenticated
[ 9420.300450] wlan0: associate with 00:04:ed:9d:dd:6e (try 1)
[ 9420.312949] wlan0: RX ReassocResp from 00:04:ed:9d:dd:6e (capab=0x411 status=0 aid=1)
[ 9420.312958] wlan0: associated
[ 9431.092853] wlan0: no IPv6 routers present
[ 9573.831366] acpi_call: Module loaded successfully
[ 9598.503203] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=600
[ 9598.999816] kbd_keycode: 33 callbacks suppressed
[ 9598.999826] keyboard: can't emulate rawmode for keycode 240
[ 9598.999844] keyboard: can't emulate rawmode for keycode 240
[ 9598.999856] asus_wmi: Unknown key 57 pressed
[ 9851.905262] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0
[ 9852.201700] keyboard: can't emulate rawmode for keycode 240
[ 9852.201721] keyboard: can't emulate rawmode for keycode 240
[ 9852.201733] asus_wmi: Unknown key 58 pressed
[11215.400049] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=600
[11215.591378] keyboard: can't emulate rawmode for keycode 240
[11215.591385] keyboard: can't emulate rawmode for keycode 240
[11215.591389] asus_wmi: Unknown key 57 pressed
[11236.700781] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0
[11237.088890] keyboard: can't emulate rawmode for keycode 240
[11237.088910] keyboard: can't emulate rawmode for keycode 240
[11237.088919] asus_wmi: Unknown key 58 pressed
[11439.639182] cfg80211: All devices are disconnected, going to restore regulatory settings
[11439.639198] cfg80211: Restoring regulatory settings
[11439.639208] cfg80211: Calling CRDA to update world regulatory domain
[11439.646852] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[11439.646864] cfg80211: World regulatory domain updated:
[11439.646871] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11439.646880] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11439.646888] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11439.646897] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11439.646905] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11439.646913] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11440.784869] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[11440.983493] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 2)
[11441.183394] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 3)
[11441.383353] wlan0: authentication with 00:04:ed:9d:dd:6e timed out
[11447.446561] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[11447.449497] wlan0: authenticated
[11447.449652] wlan0: associate with 00:04:ed:9d:dd:6e (try 1)
[11447.456342] wlan0: RX ReassocResp from 00:04:ed:9d:dd:6e (capab=0x411 status=0 aid=1)
[11447.456351] wlan0: associated
[11535.616448] cfg80211: All devices are disconnected, going to restore regulatory settings
[11535.616453] cfg80211: Restoring regulatory settings
[11535.616456] cfg80211: Calling CRDA to update world regulatory domain
[11535.621213] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[11535.621216] cfg80211: World regulatory domain updated:
[11535.621218] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11535.621220] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11535.621221] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11535.621223] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11535.621224] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11535.621226] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11536.762560] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[11536.844827] wlan0: authenticated
[11536.863680] wlan0: associate with 00:04:ed:9d:dd:6e (try 1)
[11536.868064] wlan0: RX ReassocResp from 00:04:ed:9d:dd:6e (capab=0x411 status=0 aid=1)
[11536.868072] wlan0: associated
[11696.345755] cfg80211: All devices are disconnected, going to restore regulatory settings
[11696.345770] cfg80211: Restoring regulatory settings
[11696.345780] cfg80211: Calling CRDA to update world regulatory domain
[11696.352660] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[11696.352669] cfg80211: World regulatory domain updated:
[11696.352673] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11696.352681] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11696.352687] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11696.352692] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11696.352698] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11696.352703] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11697.456458] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[11697.459098] wlan0: authenticated
[11697.478063] wlan0: associate with 00:04:ed:9d:dd:6e (try 1)
[11697.488838] wlan0: RX ReassocResp from 00:04:ed:9d:dd:6e (capab=0x411 status=0 aid=1)
[11697.488847] wlan0: associated
[12073.477664] cfg80211: All devices are disconnected, going to restore regulatory settings
[12073.477678] cfg80211: Restoring regulatory settings
[12073.477688] cfg80211: Calling CRDA to update world regulatory domain
[12073.485030] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[12073.485039] cfg80211: World regulatory domain updated:
[12073.485044] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[12073.485051] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12073.485057] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12073.485063] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12073.485068] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12073.485074] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12104.754482] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[12104.778706] wlan0: authenticated
[12104.797498] wlan0: associate with 00:04:ed:9d:dd:6e (try 1)
[12104.857470] wlan0: RX ReassocResp from 00:04:ed:9d:dd:6e (capab=0x411 status=0 aid=1)
[12104.857481] wlan0: associated
[12116.860266] wlan0: no IPv6 routers present
[12720.726825] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=600
[12721.131034] keyboard: can't emulate rawmode for keycode 240
[12721.131053] keyboard: can't emulate rawmode for keycode 240
[12721.131060] asus_wmi: Unknown key 57 pressed
[12808.757628] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0
[12808.955264] keyboard: can't emulate rawmode for keycode 240
[12808.955285] keyboard: can't emulate rawmode for keycode 240
[12808.955292] asus_wmi: Unknown key 58 pressed
[12993.611018] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=600
[12994.008371] keyboard: can't emulate rawmode for keycode 240
[12994.008392] keyboard: can't emulate rawmode for keycode 240
[12994.008402] asus_wmi: Unknown key 57 pressed
[13001.829301] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0
[13002.201737] keyboard: can't emulate rawmode for keycode 240
[13002.201759] keyboard: can't emulate rawmode for keycode 240
[13002.201769] asus_wmi: Unknown key 58 pressed
[13096.215075] cfg80211: All devices are disconnected, going to restore regulatory settings
[13096.215088] cfg80211: Restoring regulatory settings
[13096.215096] cfg80211: Calling CRDA to update world regulatory domain
[13096.222277] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[13096.222287] cfg80211: World regulatory domain updated:
[13096.222292] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[13096.222299] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13096.222305] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[13096.222311] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[13096.222317] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13096.222323] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13121.473439] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[13121.671300] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 2)
[13121.871227] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 3)
[13122.071194] wlan0: authentication with 00:04:ed:9d:dd:6e timed out
[13128.146523] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 1/3)
[13128.150328] wlan0: direct probe responded
[13128.201212] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[13128.223345] wlan0: authenticated
[13128.242153] wlan0: associate with 00:04:ed:9d:dd:6e (try 1)
[13128.261279] wlan0: RX ReassocResp from 00:04:ed:9d:dd:6e (capab=0x411 status=0 aid=1)
[13128.261288] wlan0: associated
[13141.032933] wlan0: no IPv6 routers present
[13305.698992] cfg80211: All devices are disconnected, going to restore regulatory settings
[13305.699005] cfg80211: Restoring regulatory settings
[13305.699015] cfg80211: Calling CRDA to update world regulatory domain
[13305.705863] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[13305.705873] cfg80211: World regulatory domain updated:
[13305.705877] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[13305.705884] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13305.705890] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[13305.705896] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[13305.705902] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13305.705907] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13306.760677] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[13306.763030] wlan0: authenticated
[13306.784782] wlan0: associate with 00:04:ed:9d:dd:6e (try 1)
[13306.828066] wlan0: RX ReassocResp from 00:04:ed:9d:dd:6e (capab=0x411 status=0 aid=1)
[13306.828077] wlan0: associated
[13696.330595] cfg80211: All devices are disconnected, going to restore regulatory settings
[13696.330609] cfg80211: Restoring regulatory settings
[13696.330619] cfg80211: Calling CRDA to update world regulatory domain
[13696.337614] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[13696.337623] cfg80211: World regulatory domain updated:
[13696.337628] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[13696.337635] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13696.337641] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[13696.337646] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[13696.337652] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13696.337658] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13733.604738] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[13733.623034] wlan0: authenticated
[13733.642242] wlan0: associate with 00:04:ed:9d:dd:6e (try 1)
[13733.839084] wlan0: associate with 00:04:ed:9d:dd:6e (try 2)
[13733.842720] wlan0: RX ReassocResp from 00:04:ed:9d:dd:6e (capab=0x411 status=0 aid=1)
[13733.842728] wlan0: associated
[13745.115469] wlan0: no IPv6 routers present
[14407.811620] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=600
[14408.192811] keyboard: can't emulate rawmode for keycode 240
[14408.192834] keyboard: can't emulate rawmode for keycode 240
[14408.192843] asus_wmi: Unknown key 57 pressed
[14493.376502] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0
[14493.494112] keyboard: can't emulate rawmode for keycode 240
[14493.494137] keyboard: can't emulate rawmode for keycode 240
[14493.494147] asus_wmi: Unknown key 58 pressed
[15176.208635] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=600
[15177.019803] keyboard: can't emulate rawmode for keycode 240
[15177.019822] keyboard: can't emulate rawmode for keycode 240
[15177.019832] asus_wmi: Unknown key 57 pressed
[15265.919759] keyboard: can't emulate rawmode for keycode 240
[15265.919766] keyboard: can't emulate rawmode for keycode 240
[15265.919768] asus_wmi: Unknown key 58 pressed
[15265.944181] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0
[15458.240062] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=600
[15458.666386] keyboard: can't emulate rawmode for keycode 240
[15458.666408] keyboard: can't emulate rawmode for keycode 240
[15458.666417] asus_wmi: Unknown key 57 pressed
[15470.473853] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0
[15470.890685] keyboard: can't emulate rawmode for keycode 240
[15470.890705] keyboard: can't emulate rawmode for keycode 240
[15470.890715] asus_wmi: Unknown key 58 pressed
[17078.438679] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=600
[17078.858526] keyboard: can't emulate rawmode for keycode 240
[17078.858547] keyboard: can't emulate rawmode for keycode 240
[17078.858558] asus_wmi: Unknown key 57 pressed
[17092.211795] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0
[17092.630121] keyboard: can't emulate rawmode for keycode 240
[17092.630144] keyboard: can't emulate rawmode for keycode 240
[17092.630154] asus_wmi: Unknown key 58 pressed
[glow=red,2,300][17195.071390] acpi_call: Calling \_SB.PCI0.P0P1.VGA._OFF
[17195.071415] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17195.073961] acpi_call: Calling \_SB.PCI0.P0P2.VGA._OFF
[17195.073980] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17195.076281] acpi_call: Calling \_SB_.PCI0.OVGA.ATPX
[17195.076299] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17195.078626] acpi_call: Calling \_SB_.PCI0.OVGA.XTPX
[17195.078643] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17195.080974] acpi_call: Calling \_SB.PCI0.P0P3.PEGP._OFF
[17195.080997] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17195.083593] acpi_call: Calling \_SB.PCI0.P0P2.PEGP._OFF
[17195.083610] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17195.086199] acpi_call: Calling \_SB.PCI0.P0P1.PEGP._OFF
[17195.086215] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17195.088714] acpi_call: Calling \_SB.PCI0.MXR0.MXM0._OFF
[17195.088731] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17195.091340] acpi_call: Calling \_SB.PCI0.PEG1.GFX0._OFF
[17195.091356] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17195.093954] acpi_call: Calling \_SB.PCI0.PEG0.GFX0.DOFF
[17195.093972] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17195.096479] acpi_call: Calling \_SB.PCI0.PEG1.GFX0.DOFF
[17195.096495] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17195.099040] acpi_call: Calling \_SB.PCI0.PEG0.PEGP._OFF
[17195.099057] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17195.101597] acpi_call: Calling \_SB.PCI0.XVR0.Z01I.DGOF
[17195.101611] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17195.104111] acpi_call: Calling \_SB.PCI0.PEGR.GFX0._OFF
[17195.189164] acpi_call: Call successful: 0x0
[17249.039696] acpi_call: Calling \_SB.PCI0.P0P1.VGA._OFF
[17249.039717] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17249.042546] acpi_call: Calling \_SB.PCI0.P0P2.VGA._OFF
[17249.042563] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17249.045309] acpi_call: Calling \_SB_.PCI0.OVGA.ATPX
[17249.045326] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17249.048061] acpi_call: Calling \_SB_.PCI0.OVGA.XTPX
[17249.048083] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17249.050764] acpi_call: Calling \_SB.PCI0.P0P3.PEGP._OFF
[17249.050784] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17249.053436] acpi_call: Calling \_SB.PCI0.P0P2.PEGP._OFF
[17249.053453] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17249.056465] acpi_call: Calling \_SB.PCI0.P0P1.PEGP._OFF
[17249.056485] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17249.059433] acpi_call: Calling \_SB.PCI0.MXR0.MXM0._OFF
[17249.059452] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17249.062113] acpi_call: Calling \_SB.PCI0.PEG1.GFX0._OFF
[17249.062129] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17249.064790] acpi_call: Calling \_SB.PCI0.PEG0.GFX0.DOFF
[17249.064807] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17249.067409] acpi_call: Calling \_SB.PCI0.PEG1.GFX0.DOFF
[17249.067425] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17249.070192] acpi_call: Calling \_SB.PCI0.PEG0.PEGP._OFF
[17249.070209] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17249.072879] acpi_call: Calling \_SB.PCI0.XVR0.Z01I.DGOF
[17249.072897] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17249.075499] acpi_call: Calling \_SB.PCI0.PEGR.GFX0._OFF
[17249.075582] acpi_call: Call successful: 0x0
[17311.722327] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=600
[17312.359952] keyboard: can't emulate rawmode for keycode 240
[17312.360010] keyboard: can't emulate rawmode for keycode 240
[17312.360020] asus_wmi: Unknown key 57 pressed
[17342.675320] acpi_call: Calling \_SB.PCI0.P0P1.VGA._OFF
[17342.675327] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17342.676685] acpi_call: Calling \_SB.PCI0.P0P2.VGA._OFF
[17342.676702] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17342.678589] acpi_call: Calling \_SB_.PCI0.OVGA.ATPX
[17342.678593] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17342.679902] acpi_call: Calling \_SB_.PCI0.OVGA.XTPX
[17342.679917] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17342.681791] acpi_call: Calling \_SB.PCI0.P0P3.PEGP._OFF
[17342.681795] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17342.683431] acpi_call: Calling \_SB.PCI0.P0P2.PEGP._OFF
[17342.683446] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17342.685515] acpi_call: Calling \_SB.PCI0.P0P1.PEGP._OFF
[17342.685523] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17342.687272] acpi_call: Calling \_SB.PCI0.MXR0.MXM0._OFF
[17342.687287] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17342.689308] acpi_call: Calling \_SB.PCI0.PEG1.GFX0._OFF
[17342.689315] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17342.691053] acpi_call: Calling \_SB.PCI0.PEG0.GFX0.DOFF
[17342.691068] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17342.693057] acpi_call: Calling \_SB.PCI0.PEG1.GFX0.DOFF
[17342.693064] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17342.695159] acpi_call: Calling \_SB.PCI0.PEG0.PEGP._OFF
[17342.695174] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17342.697435] acpi_call: Calling \_SB.PCI0.XVR0.Z01I.DGOF
[17342.697450] acpi_call: Cannot get handle: Error: AE_NOT_FOUND[/glow]
[17342.699774] acpi_call: Calling \_SB.PCI0.PEGR.GFX0._OFF
[17342.699853] acpi_call: Call successful: 0x0
[17373.590402] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0
[17373.796548] keyboard: can't emulate rawmode for keycode 240
[17373.796565] keyboard: can't emulate rawmode for keycode 240
[17373.796572] asus_wmi: Unknown key 58 pressed
[17574.503858] cfg80211: All devices are disconnected, going to restore regulatory settings
[17574.503869] cfg80211: Restoring regulatory settings
[17574.503899] cfg80211: Calling CRDA to update world regulatory domain
[17574.511194] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[17574.511203] cfg80211: World regulatory domain updated:
[17574.511207] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[17574.511214] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[17574.511220] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[17574.511226] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[17574.511232] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[17574.511238] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[17575.601220] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[17575.603166] wlan0: authenticated
[17575.621810] wlan0: associate with 00:04:ed:9d:dd:6e (try 1)
[17575.625364] wlan0: RX ReassocResp from 00:04:ed:9d:dd:6e (capab=0x411 status=0 aid=1)
[17575.625373] wlan0: associated
carlo@BaddyAsus:~$

vai sul messaggio sopra, su modifica e
posta gli output all' interno dei tag 'code'

Fatto.

La temperatura + alta tra tutti i sensori è a 47° ma la ventola continua imperterrita!

io rimuoverei quello script hai provato con bumblee

Non lo conosco, non ce l'ho e USC non lo trova! Altro?

Baddy ha scritto: Non lo conosco, non ce l'ho e USC non lo trova! Altro?

Hardware/Video/GraficaIbrida/Bumblebee
Scusate, ma qui stiamo parlando di tecnologia Optimus? ???

cristian_c ha scritto:
Baddy ha scritto: Non lo conosco, non ce l'ho e USC non lo trova! Altro?
Hardware/Video/GraficaIbrida/Bumblebee
Scusate, ma qui stiamo parlando di tecnologia Optimus? ???

(yes) (yes)
perchè non l'avevi capito!!

Codice: Seleziona tutto

00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller])
01:00.0 VGA compatible controller [0300]: nVidia Corporation Device [10de:1050] (rev a1) (prog-if 00 [VGA controller])

Nel frattempo ho riavviato e la ventola s'è fermata!

Ora, cosa dovrei fare? Calcolato che tra poco devo uscire (ho allenamento di volley!)..

Seguire la guida per arrivare dove?? Intanto provo..

Sono fermo al paragrafo "Utilizzo" che non comprendo e nel paragrafo "Script diconfigurazione" i link segnalati per gli elenchi dei portatili e dell'hardware non sembrano sia più quelli giusti!!

Baddy ha scritto: Sono fermo al paragrafo "Utilizzo" che non comprendo e nel paragrafo "Script diconfigurazione" i link segnalati per gli elenchi dei portatili e dell'hardware non sembrano sia più quelli giusti!!

quale punto non riesci a capire? ???

La scheda video Intel è in esecuzione sul desktop e la scheda Nvidia può essere usata per applicazioni che richiedono maggiore potenza grafica, utilizzando i seguenti comandi:
Codice: Seleziona tutto
optirun32 nome_applicazione 
per le versioni 32 bit e:
Codice: Seleziona tutto
optirun64 nome_applicazione
per le versioni 64 bit, sostituendo «nome_applicazione» con il nome dell'applicazione che si desidera avviare.

- Con quale nome dovrei sostituire?
- E' una cosa devo fare ogni volta per avviare e diabilitare le 2 schede, o poi va in automatico?

Ad esempio è possibile vedere la differenza di frame al secondo misurati digitando i comandi:
Codice: Seleziona tutto
glxspheres 
che utilizza la scheda Intel e:
Codice: Seleziona tutto
optirun32 glxspheres
che utilizza la scheda Nvidia.

- Il primo funziona: mi fa vedere una serie di sfere colorate in movimento ecc ecc.; il secondo non è un comando valido!

Per quanto riguarda il resto della guida da

Script di configurazione

a

Hardware supportato

i link degli elenchi dei portatili e dell'hardware portano a pagine sbagliate:

questa pagina

-> https://github.com/MrMEEE/bumblebee/tree/master/install-files/ubuntu

pagina del progetto

-> https://github.com/MrMEEE/bumblebee

Mentre

dedicata ad Ubuntu

porta a https://github.com/Bumblebee-Project/Bumblebee da cui non riesco a capire come trovare gli script per i vari modelli di computer.

optirun32 vlc
se non funge togli il 32 o il 64

Il tuo comando lancia VLC. Poi ho provato senza 32 o 64 (il mio è un Asus quasi nuovo a 64bit) col comando che non funzionava e ora va, come l'altro sopra!

Codice: Seleziona tutto

carlo@BaddyAsus:~$ optirun glxspheres
Polygons in scene: 62464
Visual ID of window: 0x21
Context is Direct
OpenGL Renderer: GeForce GT 520M/PCI/SSE2
82.078483 frames/sec - 91.599587 Mpixels/sec
83.432527 frames/sec - 93.110700 Mpixels/sec
86.133835 frames/sec - 96.125359 Mpixels/sec
86.050065 frames/sec - 96.031873 Mpixels/sec
89.172081 frames/sec - 99.516043 Mpixels/sec
84.336547 frames/sec - 94.119586 Mpixels/sec
85.662633 frames/sec - 95.599499 Mpixels/sec
86.410073 frames/sec - 96.433642 Mpixels/sec
carlo@BaddyAsus:~$

Per il resto c'è modo di risolvere gli impicci della guida?

Per risolvere il mio problema in generale? Cioè, questo riavvio random e spesso doppio, è causato dal fatto che vanno in crash le due presunte schede video (il chip Intel della scheda madre e la scheda video vera e propria della Nvidia)? Pensate che la prossima release potrebbe risolvere questo tipo di problema? Perchè se sì, smetto di rompervi le scatole, mi metto il cuore in pace e attendo un paio di settimane. Ci guadagnamo tutti in salute mi sa! Anche se odio non risolvere un problema. :-\

Questo è l'altro comando:

Codice: Seleziona tutto

carlo@BaddyAsus:~$ glxspheres 
Polygons in scene: 62464
Visual ID of window: 0x94
Context is Direct
OpenGL Renderer: Mesa DRI Intel(R) Sandybridge Mobile 
58.601395 frames/sec - 65.399157 Mpixels/sec
59.845624 frames/sec - 66.787716 Mpixels/sec
59.769149 frames/sec - 66.702370 Mpixels/sec
59.950209 frames/sec - 66.904434 Mpixels/sec
59.865512 frames/sec - 66.809912 Mpixels/sec
carlo@BaddyAsus:~$

@Baddy,
dovresti segnalare nella board del Gruppo Documentazione la presenza dei link a pagine inesistenti (yes)

Fatto!

Intendo la segnalazione!

Per il mio problema.....

....si riavvia ancora anche se meno fequentemente e spesso senza il doppio riavvio..........ma persevera :'( !!!

Ovviamente ragazzi:

GRAZIE MILLE VERAMENTE!!!

per l'impegno e il sostegno che mi state dimostrando. (b2b)

Forum Ubuntu-it

[Risolto] ubuntu 11.10 termina la sessione da solo

Re: [Risolto] ubuntu 11.10 termina la sessione da solo

Re: [Risolto] ubuntu 11.10 termina la sessione da solo

Re: [Risolto] ubuntu 11.10 termina la sessione da solo

Re: [Risolto] ubuntu 11.10 termina la sessione da solo

Re: [Risolto] ubuntu 11.10 termina la sessione da solo

Re: [Risolto] ubuntu 11.10 termina la sessione da solo

Re: [Risolto] ubuntu 11.10 termina la sessione da solo

Re: [Risolto] ubuntu 11.10 termina la sessione da solo

Re: [Risolto] ubuntu 11.10 termina la sessione da solo

Re: [Risolto] ubuntu 11.10 termina la sessione da solo

Re: [Risolto] ubuntu 11.10 termina la sessione da solo

Re: [Risolto] ubuntu 11.10 termina la sessione da solo

Re: [Risolto] ubuntu 11.10 termina la sessione da solo

Re: [Risolto] ubuntu 11.10 termina la sessione da solo

Re: [Risolto] ubuntu 11.10 termina la sessione da solo

Re: [Risolto] ubuntu 11.10 termina la sessione da solo

Re: [Risolto] ubuntu 11.10 termina la sessione da solo

Re: [Risolto] ubuntu 11.10 termina la sessione da solo

Re: [Risolto] ubuntu 11.10 termina la sessione da solo

Re: [Risolto] ubuntu 11.10 termina la sessione da solo