Disco dati in sola lettura

Riconoscimento, installazione e configurazione delle periferiche.
Scrivi risposta
nick091
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 447
Iscrizione: mercoledì 25 giugno 2008, 18:36

Disco dati in sola lettura

Messaggio da nick091 »

Ho un sistama con 3 dischi, un disco con lubuntu, un disco con windos 10 ed un disco dati "Repository"
Se devo usare windows cambio la sequenza di boot dal bios.
Ho formattato il disco windows ed adesso mi trovo che da linux il disco dati lo vedo solo in lettura, anche con "$ sudo pcmanfm-qt" vedo il disco in sola lettura

Ho dato alcuni comandi da terminale che spero siano utili. Con i .... ho messo delle righe di output relative a loop1, loop2 ecc.. che mi sembravano inutili

Codice: Seleziona tutto

$ sudo fdisk -l
....

Disk /dev/sda: 111,79 GiB, 120034123776 bytes, 234441648 sectors
Disk model: SanDisk SDSSDA12
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 22DEF844-861E-4E45-AAFB-D14085626370

Device         Start       End   Sectors   Size Type
/dev/sda1       2048    923647    921600   450M Windows re
/dev/sda2     923648   1128447    204800   100M EFI System
/dev/sda3    1128448   1161215     32768    16M Microsoft 
/dev/sda4    1161216 233320706 232159491 110,7G Microsoft 
/dev/sda5  233322496 234438655   1116160   545M Windows re


Disk /dev/sdb: 447,13 GiB, 480103981056 bytes, 937703088 sectors
Disk model: Lexar SSD NQ100 
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: CE54DCFA-999B-354B-A7E6-416C7D40AEBF

Device      Start       End   Sectors   Size Type
/dev/sdb1    4096    618495    614400   300M EFI System
/dev/sdb2  618496 937697984 937079489 446,8G Linux filesys


Disk /dev/sdc: 232,89 GiB, 250059350016 bytes, 488397168 sectors
Disk model: ST3250312AS     
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x58db3cd3

Device     Boot Start       End   Sectors   Size Id Type
/dev/sdc1        2048 488394751 488392704 232,9G  7 HPFS/N

.....

Codice: Seleziona tutto

$ sudo blkid
/dev/sdb2: UUID="19157719-eb97-4c71-9249-60c6e4faa0d2" BLOCK_SIZE="4096" TYPE="ext4" PARTLABEL="root" PARTUUID="cfb3d568-2887-4f49-90d4-46b9de94a4c4"
/dev/sdb1: LABEL_FATBOOT="NO_LABEL" LABEL="NO_LABEL" UUID="1063-FBFE" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="17e9958e-7d73-5449-b8d9-a5e6efe93960"
/dev/sdc1: LABEL="Repository" BLOCK_SIZE="512" UUID="7050243750240706" TYPE="ntfs" PARTUUID="58db3cd3-01"
/dev/sda4: BLOCK_SIZE="512" UUID="58D25E4ED25E308C" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="c4907bca-9b01-4667-bff2-e6eacdc6e857"
/dev/sda2: UUID="1854-382A" BLOCK_SIZE="512" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="1987e731-d5a1-4d58-9c35-3d5055413de9"
/dev/sda5: BLOCK_SIZE="512" UUID="525058C05058AC8B" TYPE="ntfs" PARTUUID="968a33af-9e6e-4e2b-b024-798b85a8b013"
/dev/sda1: LABEL="Ripristino" BLOCK_SIZE="512" UUID="14E45399E4537BC4" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="40fa2a1f-439a-4aee-ad35-3e80b3d7f09c"
......
/dev/sda3: PARTLABEL="Microsoft reserved partition" PARTUUID="777322ab-c074-47ca-8383-cc28c3354c82"
......

Codice: Seleziona tutto

$ lsblk -f
NAME FSTYPE FSVER LABEL UUID                                 FSAVAIL FSUSE% MOUNTPOINTS
........
sda                                                                         
├─sda1
│    ntfs         Ripristino
│                       14E45399E4537BC4                                    
├─sda2
│    vfat   FAT32       1854-382A                                           
├─sda3
│                                                                           
├─sda4
│    ntfs               58D25E4ED25E308C                                    
└─sda5
     ntfs               525058C05058AC8B                                    
sdb                                                                         
├─sdb1
│    vfat   FAT32 NO_LABEL
│                       1063-FBFE                             293,3M     2% /boot/efi
└─sdb2
     ext4   1.0         19157719-eb97-4c71-9249-60c6e4faa0d2  392,3G     5% /var/snap/firefox/common/host-hunspell
                                                                            /
sdc                                                                         
└─sdc1
     ntfs         Repository
                        7050243750240706                       61,8G    73% /media/nicola/Repository

Codice: Seleziona tutto

$ cat /etc/fstab
# <file system>             <mount point>  <type>  <options>  <dump>  <pass>
UUID=1063-FBFE                            /boot/efi      vfat    umask=0077 0 2
UUID=19157719-eb97-4c71-9249-60c6e4faa0d2 /              ext4    defaults,discard 0 1
/swapfile                                 swap           swap    defaults   0 0
tmpfs                                     /tmp           tmpfs   defaults,noatime,mode=1777 0 0
Avatar utente
steff
Moderatore Globale
Moderatore Globale
Messaggi: 40369
Iscrizione: domenica 18 febbraio 2007, 19:48
Desktop: LXQt+labwc
Distribuzione: Arch; Debian; Ubuntu Server
Sesso: Maschile
Località: Toscana
Contatti:

Re: Disco dati in sola lettura

Messaggio da steff »

Ho un sistama con 3 dischi, un disco con lubuntu, un disco con windos 10 ed un disco dati "Repository"

Ho formattato il disco windows ed adesso mi trovo che da linux il disco dati lo vedo solo in lettura, anche con "$ sudo pcmanfm-qt" vedo il disco in sola lettura
Il disco "windows" sarebbe "repository"? Potrebbe essere che windows è in ibernazione e il disco risulta occupato/in uso in ubuntu. Puoi controllare

Codice: Seleziona tutto

sudo dmesg
dopo averlo inserito. Se non è questo ha altri problemi di filesystem.

Non si dovrebbe usare "sudo programma", pcmanfm-qt ha sotto "strumenti" "Apri scheda come root", ma se un disco è montato in solo lettura non cambia nulla.
Hai fatto un backup oggi? Ieri?? Quando???
La Documentazione da consultare e la FAQ sul uso del forum
Sistemi: LXQt - semplice, modulare e configurabile + *ubuntu in Vbox
nick091
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 447
Iscrizione: mercoledì 25 giugno 2008, 18:36

Re: Disco dati in sola lettura

Messaggio da nick091 »

Il disco Repository con cui ho problemi è il disco dati /dev/sdc: 232,89 GiB ST3250312AS
il disco windows è invece /dev/sda: 111,79 GiB SDSSDA12

L'output del comando è molto lungo ed ho dovuto tagliare la prima parte per mandare il messaggio entro i 30000 caratteri

Codice: Seleziona tutto


[    0.893185] NET: Registered PF_PACKET protocol family
[    0.893213] Key type dns_resolver registered
[    0.893519] microcode: sig=0x906e9, pf=0x2, revision=0xf8
[    0.893532] microcode: Microcode Update Driver: v2.2.
[    0.893537] IPI shorthand broadcast: enabled
[    0.893549] sched_clock: Marking stable (893086303, 365771)->(895122733, -1670659)
[    0.893672] registered taskstats version 1
[    0.893729] Loading compiled-in X.509 certificates
[    0.894215] Loaded X.509 cert 'Build time autogenerated kernel key: 2f322af05166b99aa790ffff5e1f713c37ac6407'    
[    0.894652] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'      
[    0.895080] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'   
[    0.895081] blacklist: Loading compiled-in revocation X.509 certificates
[    0.895095] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'     
[    0.895107] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03'
[    0.895119] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b'
[    0.895131] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8'
[    0.895144] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d'
[    0.895156] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c'
[    0.895167] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af'
[    0.895179] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9'
[    0.895253] zswap: loaded using pool lzo/zbud
[    0.895373] Key type .fscrypt registered
[    0.895374] Key type fscrypt-provisioning registered
[    0.898201] Key type encrypted registered
[    0.898206] AppArmor: AppArmor sha1 policy hashing enabled
[    0.899143] ima: No TPM chip found, activating TPM-bypass!
[    0.899145] Loading compiled-in module X.509 certificates
[    0.899591] Loaded X.509 cert 'Build time autogenerated kernel key: 2f322af05166b99aa790ffff5e1f713c37ac6407'    
[    0.899593] ima: Allocated hash algorithm: sha1
[    0.899597] ima: No architecture policies found
[    0.899607] evm: Initialising EVM extended attributes:
[    0.899608] evm: security.selinux
[    0.899609] evm: security.SMACK64
[    0.899610] evm: security.SMACK64EXEC
[    0.899610] evm: security.SMACK64TRANSMUTE
[    0.899611] evm: security.SMACK64MMAP
[    0.899611] evm: security.apparmor
[    0.899612] evm: security.ima
[    0.899613] evm: security.capability
[    0.899613] evm: HMAC attrs: 0x1
[    0.899826] PM:   Magic number: 4:594:108
[    0.899965] RAS: Correctable Errors collector initialized.
[    0.899973] clk: Disabling unused clocks
[    0.900874] Freeing unused decrypted memory: 2036K
[    0.901313] Freeing unused kernel image (initmem) memory: 3368K                                                  
[    0.901390] Write protecting the kernel read-only data: 30720k
[    0.901838] Freeing unused kernel image (text/rodata gap) memory: 2036K                                          
[    0.902039] Freeing unused kernel image (rodata/data gap) memory: 1328K                                          
[    0.946057] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.946059] x86/mm: Checking user space page tables
[    0.988432] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.988436] Run /init as init process
[    0.988437]   with arguments:
[    0.988438]     /init
[    0.988439]     splash
[    0.988440]   with environment:
[    0.988441]     HOME=/
[    0.988441]     TERM=linux
[    0.988442]     BOOT_IMAGE=/boot/vmlinuz-5.15.0-118-generic
[    1.153993] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.154001] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.154947] ahci 0000:00:17.0: version 3.0
[    1.155104] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
[    1.155193] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    1.155197] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst 
[    1.155716] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.155721] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.155725] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    1.155765] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    1.155769] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.155771] usb usb1: Product: xHCI Host Controller
[    1.155774] usb usb1: Manufacturer: Linux 5.15.0-118-generic xhci-hcd
[    1.155775] usb usb1: SerialNumber: 0000:00:14.0
[    1.155922] hub 1-0:1.0: USB hub found
[    1.155940] hub 1-0:1.0: 10 ports detected
[    1.158795] cryptd: max_cpu_qlen set to 1000
[    1.160918] r8169 0000:02:00.0 eth0: RTL8168c/8111c, 70:85:c2:29:88:54, XID 3c4, IRQ 125
[    1.160924] r8169 0000:02:00.0 eth0: jumbo features [frames: 6122 bytes, tx checksumming: ko]
[    1.161038] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    1.163333] i2c i2c-0: 2/2 memory slots populated (from DMI)
[    1.170127] i2c i2c-0: Successfully instantiated SPD at 0x50
[    1.176574] SSE version of gcm_enc/dec engaged.
[    1.191852] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[    1.191857] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.191860] usb usb2: Product: xHCI Host Controller
[    1.191861] usb usb2: Manufacturer: Linux 5.15.0-118-generic xhci-hcd
[    1.191863] usb usb2: SerialNumber: 0000:00:14.0
[    1.196720] scsi host0: ahci
[    1.197461] scsi host1: ahci
[    1.197560] scsi host2: ahci
[    1.197644] hub 2-0:1.0: USB hub found
[    1.197663] hub 2-0:1.0: 4 ports detected
[    1.197704] scsi host3: ahci
[    1.197749] ata1: SATA max UDMA/133 abar m2048@0xdf02b000 port 0xdf02b100 irq 124
[    1.197753] ata2: SATA max UDMA/133 abar m2048@0xdf02b000 port 0xdf02b180 irq 124
[    1.197757] ata3: SATA max UDMA/133 abar m2048@0xdf02b000 port 0xdf02b200 irq 124
[    1.197759] ata4: SATA max UDMA/133 abar m2048@0xdf02b000 port 0xdf02b280 irq 124
[    1.223378] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    1.344447] tsc: Refined TSC clocksource calibration: 3503.999 MHz
[    1.344463] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3282124c47b, max_idle_ns: 440795239402 ns
[    1.344523] clocksource: Switched to clocksource tsc
[    1.511369] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.511406] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.511721] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.511754] ata2: SATA link down (SStatus 4 SControl 300)
[    1.511855] ata3.00: ATA-11: Lexar SSD NQ100 480GB, V3.0.8, max UDMA/133
[    1.511909] ata3.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.512154] ata3.00: configured for UDMA/133
[    1.512566] ata4.00: ATA-8: ST3250312AS, JC47, max UDMA/133
[    1.512578] ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 32)
[    1.514074] ata4.00: configured for UDMA/133
[    1.515740] ata1.00: ATA-9: SanDisk SDSSDA120G, Z32080RL, max UDMA/133
[    1.518400] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.524438] usb 1-7: new high-speed USB device number 2 using xhci_hcd
[    1.526945] ata1.00: Features: Dev-Sleep
[    1.546399] ata1.00: configured for UDMA/133
[    1.546796] scsi 0:0:0:0: Direct-Access     ATA      SanDisk SDSSDA12 80RL PQ: 0 ANSI: 5
[    1.547798] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.548077] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    1.548130] sd 0:0:0:0: [sda] Write Protect is off
[    1.548141] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.548221] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.548431] scsi 2:0:0:0: Direct-Access     ATA      Lexar SSD NQ100  .8   PQ: 0 ANSI: 5
[    1.549309] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.549558] sd 2:0:0:0: [sdb] 937703088 512-byte logical blocks: (480 GB/447 GiB)
[    1.549603] sd 2:0:0:0: [sdb] Write Protect is off
[    1.549614] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.549685] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.549781] scsi 3:0:0:0: Direct-Access     ATA      ST3250312AS      JC47 PQ: 0 ANSI: 5
[    1.550481] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    1.550685] sd 3:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    1.550761] sd 3:0:0:0: [sdc] Write Protect is off
[    1.550773] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.550843] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.551847]  sda: sda1 sda2 sda3 sda4 sda5
[    1.553215] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.553393]  sdb: sdb1 sdb2
[    1.554241] sd 2:0:0:0: [sdb] Attached SCSI disk
[    1.573894]  sdc: sdc1
[    1.574822] sd 3:0:0:0: [sdc] Attached SCSI disk
[    1.702570] Console: switching to colour dummy device 80x25
[    1.702609] i915 0000:00:02.0: vgaarb: deactivate vga console
[    1.704363] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.704884] i915 0000:00:02.0: [drm] [ENCODER:83:DDI E/PHY E] is disabled/in DSI mode with an ungated DDI clock, gate it
[    1.704914] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    1.709938] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[    1.718317] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.719679] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    1.747724] fbcon: i915drmfb (fb0) is primary device
[    1.758827] Console: switching to colour frame buffer device 210x65
[    1.772706] usb 1-7: New USB device found, idVendor=413c, idProduct=1010, bcdDevice=32.98
[    1.772718] usb 1-7: New USB device strings: Mfr=0, Product=11, SerialNumber=0
[    1.772724] usb 1-7: Product: USB 2.0 Hub [MTT]
[    1.773771] hub 1-7:1.0: USB hub found
[    1.775373] hub 1-7:1.0: 4 ports detected
[    1.787427] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    1.916445] usb 1-8: new low-speed USB device number 3 using xhci_hcd
[    2.068341] usb 1-8: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
[    2.068354] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.068360] usb 1-8: Product: USB Optical Mouse
[    2.068366] usb 1-8: Manufacturer: Logitech
[    2.144437] usb 1-7.4: new low-speed USB device number 4 using xhci_hcd
[    2.252579] usb 1-7.4: New USB device found, idVendor=413c, idProduct=2110, bcdDevice= 0.06
[    2.252592] usb 1-7.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.252599] usb 1-7.4: Product: Dell Wired Multimedia Keyboard
[    2.252604] usb 1-7.4: Manufacturer: Dell
[    2.372442] usb 1-10: new high-speed USB device number 5 using xhci_hcd
[    2.531745] usb 1-10: New USB device found, idVendor=06cb, idProduct=1595, bcdDevice= 0.00
[    2.531758] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.531765] usb 1-10: Product: KM-HIFI-384KHZ
[    2.531770] usb 1-10: Manufacturer: Synaptics
[    2.551708] hid: raw HID events driver (C) Jiri Kosina
[    2.566898] usbcore: registered new interface driver usbhid
[    2.566911] usbhid: USB HID core driver
[    2.569701] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:046D:C077.0001/input/input4
[    2.569832] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-8/input0
[    2.569939] input: Dell Dell Wired Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4:1.0/0003:413C:2110.0002/input/input5
[    2.628820] hid-generic 0003:413C:2110.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell Wired Multimedia Keyboard] on usb-0000:00:14.0-7.4/input0
[    2.629299] input: Dell Dell Wired Multimedia Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4:1.1/0003:413C:2110.0003/input/input6
[    2.629625] input: Dell Dell Wired Multimedia Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4:1.1/0003:413C:2110.0003/input/input7
[    2.688675] input: Dell Dell Wired Multimedia Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4:1.1/0003:413C:2110.0003/input/input8
[    2.689169] hid-generic 0003:413C:2110.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [Dell Dell Wired Multimedia Keyboard] on usb-0000:00:14.0-7.4/input1
[    2.689503] input: Synaptics KM-HIFI-384KHZ Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:06CB:1595.0004/input/input9
[    2.748790] hid-generic 0003:06CB:1595.0004: input,hidraw3: USB HID v1.11 Device [Synaptics KM-HIFI-384KHZ] on usb-0000:00:14.0-10/input2
[    3.272370] raid6: sse2x4   gen() 13013 MB/s
[    3.340367] raid6: sse2x4   xor() 11697 MB/s
[    3.408368] raid6: sse2x2   gen() 20088 MB/s
[    3.476369] raid6: sse2x2   xor() 11815 MB/s
[    3.544369] raid6: sse2x1   gen() 14825 MB/s
[    3.612369] raid6: sse2x1   xor() 10228 MB/s
[    3.612370] raid6: using algorithm sse2x2 gen() 20088 MB/s
[    3.612371] raid6: .... xor() 11815 MB/s, rmw enabled
[    3.612373] raid6: using ssse3x2 recovery algorithm
[    3.615360] xor: measuring software checksum speed
[    3.615770]    prefetch64-sse  : 24149 MB/sec
[    3.616215]    generic_sse     : 22127 MB/sec
[    3.616216] xor: using function: prefetch64-sse (24149 MB/sec)
[    3.641406] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes
[    4.017718] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    4.318209] systemd[1]: Inserted module 'autofs4'
[    4.383094] systemd[1]: systemd 249.11-0ubuntu3.12 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    4.400630] systemd[1]: Detected architecture x86-64.
[    4.401786] systemd[1]: Hostname set to <nicola-lubuntu>.
[    4.553167] systemd[1]: Configuration file /run/systemd/system/netplan-ovs-cleanup.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
[    4.634861] systemd[1]: Queued start job for default target Graphical Interface.
[    4.635899] systemd[1]: Created slice Slice /system/modprobe.
[    4.636176] systemd[1]: Created slice Slice /system/systemd-fsck.
[    4.636388] systemd[1]: Created slice User and Session Slice.
[    4.636461] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.636618] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.636678] systemd[1]: Reached target User and Group Name Lookups.
[    4.636692] systemd[1]: Reached target Remote File Systems.
[    4.636705] systemd[1]: Reached target Slice Units.
[    4.636720] systemd[1]: Reached target Mounting snaps.
[    4.636743] systemd[1]: Reached target Local Verity Protected Volumes.
[    4.636811] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.636919] systemd[1]: Listening on LVM2 poll daemon socket.
[    4.639079] systemd[1]: Listening on Syslog Socket.
[    4.639164] systemd[1]: Listening on fsck to fsckd communication Socket.
[    4.639211] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    4.639387] systemd[1]: Listening on Journal Audit Socket.
[    4.639473] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.639583] systemd[1]: Listening on Journal Socket.
[    4.639950] systemd[1]: Listening on udev Control Socket.
[    4.640040] systemd[1]: Listening on udev Kernel Socket.
[    4.640690] systemd[1]: Mounting Huge Pages File System...
[    4.641336] systemd[1]: Mounting POSIX Message Queue File System...
[    4.642128] systemd[1]: Mounting Kernel Debug File System...
[    4.643172] systemd[1]: Mounting Kernel Trace File System...
[    4.644958] systemd[1]: Starting Journal Service...
[    4.645199] systemd[1]: Finished Availability of block devices.
[    4.646633] systemd[1]: Starting Set the console keyboard layout...
[    4.647814] systemd[1]: Starting Create List of Static Device Nodes...
[    4.648852] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    4.649938] systemd[1]: Starting Load Kernel Module configfs...
[    4.651595] systemd[1]: Starting Load Kernel Module drm...
[    4.652763] systemd[1]: Starting Load Kernel Module efi_pstore...
[    4.653979] systemd[1]: Starting Load Kernel Module fuse...
[    4.654182] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    4.657207] systemd[1]: Starting Load Kernel Modules...
[    4.658387] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.659824] systemd[1]: Starting Coldplug All udev Devices...
[    4.670299] EXT4-fs (sdb2): re-mounted. Opts: discard. Quota mode: none.
[    4.675554] systemd[1]: Mounted Huge Pages File System.
[    4.675696] systemd[1]: Mounted POSIX Message Queue File System.
[    4.675813] systemd[1]: Mounted Kernel Debug File System.
[    4.675926] systemd[1]: Mounted Kernel Trace File System.
[    4.676379] systemd[1]: Finished Create List of Static Device Nodes.
[    4.676796] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    4.677235] systemd[1]: Finished Load Kernel Module configfs.
[    4.677599] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    4.678468] pstore: Using crash dump compression: deflate
[    4.678474] pstore: Registered efi as persistent store backend
[    4.688776] lp: driver loaded but no devices found
[    4.693733] systemd[1]: Finished Load Kernel Module drm.
[    4.694158] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[    4.694422] systemd[1]: Finished Load Kernel Module efi_pstore.
[    4.694720] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    4.694966] systemd[1]: Finished Load Kernel Module fuse.
[    4.695297] systemd[1]: Finished Remount Root and Kernel File Systems.
[    4.698219] systemd[1]: Activating swap /swapfile...
[    4.699353] systemd[1]: Mounting FUSE Control File System...
[    4.702035] ppdev: user-space parallel port driver
[    4.705795] systemd[1]: Mounting Kernel Configuration File System...
[    4.705904] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    4.706937] systemd[1]: Starting Load/Save Random Seed...
[    4.708813] systemd[1]: Starting Create System Users...
[    4.710675] systemd[1]: Mounted FUSE Control File System.
[    4.710883] systemd[1]: Mounted Kernel Configuration File System.
[    4.715014] systemd[1]: Finished Load Kernel Modules.
[    4.716311] systemd[1]: Starting Apply Kernel Variables...
[    4.722914] systemd[1]: Finished Load/Save Random Seed.
[    4.722947] Adding 524284k swap on /swapfile.  Priority:-2 extents:4 across:442736640k SSFS
[    4.723119] systemd[1]: Activated swap /swapfile.
[    4.723272] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[    4.723302] systemd[1]: Reached target Swaps.
[    4.732968] systemd[1]: Finished Create System Users.
[    4.734908] systemd[1]: Starting Create Static Device Nodes in /dev...
[    4.735966] systemd[1]: Started Journal Service.
[    4.746870] systemd-journald[367]: Received client request to flush runtime journal.
[    4.812044] loop0: detected capacity change from 0 to 252840
[    4.814673] loop1: detected capacity change from 0 to 8
[    4.817405] loop2: detected capacity change from 0 to 252848
[    4.824588] loop3: detected capacity change from 0 to 126896
[    4.830888] loop4: detected capacity change from 0 to 130960
[    4.834822] loop5: detected capacity change from 0 to 152040
[    4.838324] loop6: detected capacity change from 0 to 152048
[    4.842140] loop7: detected capacity change from 0 to 552480
[    4.846151] loop8: detected capacity change from 0 to 551568
[    4.849589] loop9: detected capacity change from 0 to 820832
[    4.857887] loop10: detected capacity change from 0 to 716176
[    4.861275] loop11: detected capacity change from 0 to 1034424
[    4.869096] loop12: detected capacity change from 0 to 187776
[    4.875621] loop13: detected capacity change from 0 to 79520
[    4.879635] loop14: detected capacity change from 0 to 376176
[    4.882165] loop15: detected capacity change from 0 to 372328
[    5.518115] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    5.524058] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[    5.682602] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    5.682604] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    5.682605] RAPL PMU: hw unit of domain package 2^-14 Joules
[    5.682606] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    5.682607] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    5.732232] mc: Linux media interface: v0.10
[    5.812403] usbcore: registered new interface driver snd-usb-audio
[    5.861551] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    5.861718] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.879509] intel_tcc_cooling: Programmable TCC Offset detected
[    5.935036] audit: type=1400 audit(1723777668.097:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=659 comm="apparmor_parser"
[    5.935041] audit: type=1400 audit(1723777668.097:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=659 comm="apparmor_parser"
[    5.938109] audit: type=1400 audit(1723777668.101:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=658 comm="apparmor_parser"
[    5.945391] audit: type=1400 audit(1723777668.109:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ubuntu_pro_apt_news" pid=661 comm="apparmor_parser"
[    5.948748] audit: type=1400 audit(1723777668.113:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=669 comm="apparmor_parser"
[    5.948753] audit: type=1400 audit(1723777668.113:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=669 comm="apparmor_parser"
[    5.948756] audit: type=1400 audit(1723777668.113:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=669 comm="apparmor_parser"
[    5.954470] audit: type=1400 audit(1723777668.117:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=660 comm="apparmor_parser"
[    5.954475] audit: type=1400 audit(1723777668.117:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=660 comm="apparmor_parser"
[    5.954478] audit: type=1400 audit(1723777668.117:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=660 comm="apparmor_parser"
[    5.968355] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    5.968361] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
[    5.968364] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    5.968373] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    5.968375] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    5.968377] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    5.968379] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    5.968380] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    6.113399] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[    6.165887] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    6.202110] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    6.244112] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    6.246186] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    6.246248] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    6.246859] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    6.246916] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    6.246970] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[    6.247023] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[    6.331618] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[    6.386982] intel_rapl_common: Found RAPL domain package
[    6.386985] intel_rapl_common: Found RAPL domain core
[    6.386987] intel_rapl_common: Found RAPL domain uncore
[    6.386988] intel_rapl_common: Found RAPL domain dram
[    7.024974] loop16: detected capacity change from 0 to 8
[    7.089747] RTL8211B Gigabit Ethernet r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC)
[    7.156332] r8169 0000:02:00.0 enp2s0: Link is Down
[    9.827041] r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control off
[    9.827069] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   12.159793] vboxdrv: loading out-of-tree module taints kernel.
[   12.159965] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[   12.163689] vboxdrv: Found 4 processor cores
[   12.183617] kauditd_printk_skb: 40 callbacks suppressed
[   12.183619] audit: type=1400 audit(1723777674.345:52): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1082 comm="cups-browsed" capability=23  capname="sys_nice"
[   12.184642] vboxdrv: TSC mode is Invariant, tentative frequency 3503989676 Hz
[   12.184645] vboxdrv: Successfully loaded version 6.1.50_Ubuntu r161033 (interface 0x00320000)
[   12.193089] VBoxNetFlt: Successfully started.
[   12.200237] VBoxNetAdp: Successfully started.
[ 4086.433312] ntfs3: Max link count 4000
[ 4086.433314] ntfs3: Enabled Linux POSIX ACLs support
[ 4086.433315] ntfs3: Read-only LZX/Xpress compression included
[ 4086.433614] ntfs3: Unknown parameter 'windows_names'

Avatar utente
steff
Moderatore Globale
Moderatore Globale
Messaggi: 40369
Iscrizione: domenica 18 febbraio 2007, 19:48
Desktop: LXQt+labwc
Distribuzione: Arch; Debian; Ubuntu Server
Sesso: Maschile
Località: Toscana
Contatti:

Re: Disco dati in sola lettura

Messaggio da steff »

O scusa, interessa la fine soltanto:

Codice: Seleziona tutto

sudo dmesg |tail -n 15
Hai fatto un backup oggi? Ieri?? Quando???
La Documentazione da consultare e la FAQ sul uso del forum
Sistemi: LXQt - semplice, modulare e configurabile + *ubuntu in Vbox
nick091
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 447
Iscrizione: mercoledì 25 giugno 2008, 18:36

Re: Disco dati in sola lettura

Messaggio da nick091 »

Codice: Seleziona tutto

$ sudo dmesg |tail -n 15
[   12.159965] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[   12.163689] vboxdrv: Found 4 processor cores
[   12.183617] kauditd_printk_skb: 40 callbacks suppressed
[   12.183619] audit: type=1400 audit(1723777674.345:52): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1082 comm="cups-browsed" capability=23  capname="sys_nice"
[   12.184642] vboxdrv: TSC mode is Invariant, tentative frequency 3503989676 Hz
[   12.184645] vboxdrv: Successfully loaded version 6.1.50_Ubuntu r161033 (interface 0x00320000)
[   12.193089] VBoxNetFlt: Successfully started.
[   12.200237] VBoxNetAdp: Successfully started.
[ 4086.433312] ntfs3: Max link count 4000
[ 4086.433314] ntfs3: Enabled Linux POSIX ACLs support
[ 4086.433315] ntfs3: Read-only LZX/Xpress compression included
[ 4086.433614] ntfs3: Unknown parameter 'windows_names'
[48535.115542] audit: type=1400 audit(1723826197.510:53): apparmor="DENIED" operation="capable" profile="/usr/lib/snapd/snap-confine" pid=19444 comm="snap-confine" capability=12  capname="net_admin"
[48535.115553] audit: type=1400 audit(1723826197.510:54): apparmor="DENIED" operation="capable" profile="/usr/lib/snapd/snap-confine" pid=19444 comm="snap-confine" capability=38  capname="perfmon"
[48536.242750] audit: type=1400 audit(1723826198.638:55): apparmor="DENIED" operation="open" profile="snap.cherrytree.cherrytree" name="/etc/xdg/xdg-Lubuntu/gtk-3.0/settings.ini" pid=19444 comm="cherrytree" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
Avatar utente
steff
Moderatore Globale
Moderatore Globale
Messaggi: 40369
Iscrizione: domenica 18 febbraio 2007, 19:48
Desktop: LXQt+labwc
Distribuzione: Arch; Debian; Ubuntu Server
Sesso: Maschile
Località: Toscana
Contatti:

Re: Disco dati in sola lettura

Messaggio da steff »

Hai dato il commando subito dopo aver connesso il disco? Magari è sempre connesso, quindi difficile. Se accedi il disco e poi dai

Codice: Seleziona tutto

sudo mount -o remount,rw /dev/sdc1
?
Sei sicuro che windows è spento completamente?
Hai fatto un backup oggi? Ieri?? Quando???
La Documentazione da consultare e la FAQ sul uso del forum
Sistemi: LXQt - semplice, modulare e configurabile + *ubuntu in Vbox
nick091
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 447
Iscrizione: mercoledì 25 giugno 2008, 18:36

Re: Disco dati in sola lettura

Messaggio da nick091 »

Ho aperto il pc e staccato l'alimentazione del disco windows
Questa è la nuova siruazione

Codice: Seleziona tutto

sudo fdisk -l
....
Disk /dev/sda: 447,13 GiB, 480103981056 bytes, 937703088 sectors
Disk model: Lexar SSD NQ100 
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: CE54DCFA-999B-354B-A7E6-416C7D40AEBF

Device      Start       End   Sectors   Size Type
/dev/sda1    4096    618495    614400   300M EFI System
/dev/sda2  618496 937697984 937079489 446,8G Linux filesys


Disk /dev/sdb: 232,89 GiB, 250059350016 bytes, 488397168 sectors
Disk model: ST3250312AS     
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x58db3cd3

Device     Boot Start       End   Sectors   Size Id Type
/dev/sdb1        2048 488394751 488392704 232,9G  7 HPFS/N
..........

Codice: Seleziona tutto

sudo blkid
/dev/sdb1: LABEL="Repository" BLOCK_SIZE="512" UUID="7050243750240706" TYPE="ntfs" PARTUUID="58db3cd3-01"
/dev/sda2: UUID="19157719-eb97-4c71-9249-60c6e4faa0d2" BLOCK_SIZE="4096" TYPE="ext4" PARTLABEL="root" PARTUUID="cfb3d568-2887-4f49-90d4-46b9de94a4c4"
/dev/sda1: LABEL_FATBOOT="NO_LABEL" LABEL="NO_LABEL" UUID="1063-FBFE" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="17e9958e-7d73-5449-b8d9-a5e6efe93960"
......

Codice: Seleziona tutto


lsblk -f
NAME FSTYPE FSVER LABEL UUID                                 FSAVAIL FSUSE% MOUNTPOINTS
..........
sda                                                                         
├─sda1
│    vfat   FAT32 NO_LABEL
│                       1063-FBFE                             293,3M     2% /boot/efi
└─sda2
     ext4   1.0         19157719-eb97-4c71-9249-60c6e4faa0d2  382,6G     8% /var/snap/firefox/common/host-hunspell
                                                                            /
sdb                                                                         
└─sdb1
     ntfs         Repository
                        7050243750240706                       61,8G    73% /media/nicola/Repository

Codice: Seleziona tutto

cat /etc/fstab
sudo dmesg |tail -n 15
[    9.644706] r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control off
[    9.644736] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   11.844986] vboxdrv: loading out-of-tree module taints kernel.
[   11.845210] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[   11.850728] vboxdrv: Found 4 processor cores
[   11.864533] kauditd_printk_skb: 40 callbacks suppressed
[   11.864535] audit: type=1400 audit(1723869362.035:52): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=997 comm="cups-browsed" capability=23  capname="sys_nice"
[   11.868550] vboxdrv: TSC mode is Invariant, tentative frequency 3503992707 Hz
[   11.868552] vboxdrv: Successfully loaded version 6.1.50_Ubuntu r161033 (interface 0x00320000)
[   11.877663] VBoxNetFlt: Successfully started.
[   11.884763] VBoxNetAdp: Successfully started.
[   84.284146] ntfs3: Max link count 4000
[   84.284152] ntfs3: Enabled Linux POSIX ACLs support
[   84.284154] ntfs3: Read-only LZX/Xpress compression included
[   84.285119] ntfs3: Unknown parameter 'windows_names'
# <file system>             <mount point>  <type>  <options>  <dump>  <pass>
UUID=1063-FBFE                            /boot/efi      vfat    umask=0077 0 2
UUID=19157719-eb97-4c71-9249-60c6e4faa0d2 /              ext4    defaults,discard 0 1
/swapfile                                 swap           swap    defaults   0 0
tmpfs                                     /tmp           tmpfs   defaults,noatime,mode=1777 0 0


Ho dato il comando

Codice: Seleziona tutto

sudo mount -o remount,rw /dev/sdb1
ed ora dal gestore grafico del file system mi permete l'opzione Crea Nuovo->Cartella ma il risultato è
"Error creating directory /media/nicola/Repository/Nuova cartella. No such file or directory"
Lo stesso accadeva quando c'era ancora il disco windows (sudo mount -o remount,rw /dev/sdc1)
Avatar utente
steff
Moderatore Globale
Moderatore Globale
Messaggi: 40369
Iscrizione: domenica 18 febbraio 2007, 19:48
Desktop: LXQt+labwc
Distribuzione: Arch; Debian; Ubuntu Server
Sesso: Maschile
Località: Toscana
Contatti:

Re: Disco dati in sola lettura

Messaggio da steff »

Sul comando

Codice: Seleziona tutto

sudo mount -o remount,rw /dev/sdb1
non hai ottenuto errori? Posta

Codice: Seleziona tutto

 mount |grep sd
Hai fatto un backup oggi? Ieri?? Quando???
La Documentazione da consultare e la FAQ sul uso del forum
Sistemi: LXQt - semplice, modulare e configurabile + *ubuntu in Vbox
nick091
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 447
Iscrizione: mercoledì 25 giugno 2008, 18:36

Re: Disco dati in sola lettura

Messaggio da nick091 »

Niente errori

Codice: Seleziona tutto

mount |grep sd
/dev/sda2 on / type ext4 (rw,relatime,discard)
cgroup2 on /sys/fs/cgroup type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot)
/dev/sda2 on /var/snap/firefox/common/host-hunspell type ext4 (ro,noexec,noatime,discard)
/dev/sda1 on /boot/efi type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
/dev/sdb1 on /media/nicola/Repository type fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096,uhelper=udisks2)
Avatar utente
steff
Moderatore Globale
Moderatore Globale
Messaggi: 40369
Iscrizione: domenica 18 febbraio 2007, 19:48
Desktop: LXQt+labwc
Distribuzione: Arch; Debian; Ubuntu Server
Sesso: Maschile
Località: Toscana
Contatti:

Re: Disco dati in sola lettura

Messaggio da steff »

Non me lo so spiegare che scrivere su /media/nicola/Repository risulta in "Error creating directory /media/nicola/Repository/Nuova cartella. No such file or directory" -sembra tutto a posto...
Hai fatto un backup oggi? Ieri?? Quando???
La Documentazione da consultare e la FAQ sul uso del forum
Sistemi: LXQt - semplice, modulare e configurabile + *ubuntu in Vbox
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: Bing [Bot] e 5 ospiti