[Audio] Funzionamento Scheda Audio

[frafer90]

non trovo nulla..con s o senza s...niente...

[frafer90]

trovatooo
grazieeeeeee

[frafer90]

Ciao a tutti...sto cercando di seguire la procedura del wiki a questo link

http://wiki.ubuntu-it.org/Hardware/Audio/HdaIntel

MA:

1) Non so quali driver,lib,utils installare. Se installo i driver e le lib più recenti (1.0.15rc3), non posso poi installare l'utils con nome corrispondente (dato che l'utils più recente è il 1.0.15rc1). Allora vi chiedo: devo installare driver, lib e utils con lo stesso nome (tutti 1.0.15rc1)? O posso installare driver e lib (1.0.15rc3) con un nome diverso da quello degli utils (1.0.15rc1)?

2)Riscontro degli errori nell'installazione di lib da terminale... sareste disposti e in grado di aiutarmi? Qualora doveste rispondere positivamente vi inoltrerei le scritte del terminale quando non mi installa le lib.

Grazie
Francesco

[frafer90]

AIUTATEMI PLEASEEEEEEEEEEEE.............. :'( :'( :'( :'( :'( :'( nessuno mi rispondeeeeeeeeeeeeeeeee  :'( :'( :'( :'( :'( :'(

[Guiodic]

Ciao a tutti...sto cercando di seguire la procedura del wiki a questo link

http://wiki.ubuntu-it.org/Hardware/Audio/HdaIntel

MA:

1) Non so quali driver,lib,utils installare. Se installo i driver e le lib più recenti (1.0.15rc3), non posso poi installare l'utils con nome corrispondente (dato che l'utils più recente è il 1.0.15rc1). Allora vi chiedo: devo installare driver, lib e utils con lo stesso nome (tutti 1.0.15rc1)? O posso installare driver e lib (1.0.15rc3) con un nome diverso da quello degli utils (1.0.15rc1)?

2)Riscontro degli errori nell'installazione di lib da terminale... sareste disposti e in grado di aiutarmi? Qualora doveste rispondere positivamente vi inoltrerei le scritte del terminale quando non mi installa le lib.

Grazie
Francesco

Io ho i driver .14 e il resto .13

Quali errori?

[frafer90]

devo installare i lib...digito ./configure e m pare tutto ok... digito sudo make e

Codice: Seleziona tutto

       
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT pcm_asym.lo -MD -MP -MF ".deps/pcm_asym.Tpo" -c -o pcm_asym.lo pcm_asym.c; \
        then mv -f ".deps/pcm_asym.Tpo" ".deps/pcm_asym.Plo"; else rm -f ".deps/pcm_asym.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -MT pcm_asym.lo -MD -MP -MF .deps/pcm_asym.Tpo -c pcm_asym.c  -fPIC -DPIC -o .libs/pcm_asym.o
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT pcm_iec958.lo -MD -MP -MF ".deps/pcm_iec958.Tpo" -c -o pcm_iec958.lo pcm_iec958.c; \
        then mv -f ".deps/pcm_iec958.Tpo" ".deps/pcm_iec958.Plo"; else rm -f ".deps/pcm_iec958.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -MT pcm_iec958.lo -MD -MP -MF .deps/pcm_iec958.Tpo -c pcm_iec958.c  -fPIC -DPIC -o .libs/pcm_iec958.o
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT pcm_softvol.lo -MD -MP -MF ".deps/pcm_softvol.Tpo" -c -o pcm_softvol.lo pcm_softvol.c; \
        then mv -f ".deps/pcm_softvol.Tpo" ".deps/pcm_softvol.Plo"; else rm -f ".deps/pcm_softvol.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -MT pcm_softvol.lo -MD -MP -MF .deps/pcm_softvol.Tpo -c pcm_softvol.c  -fPIC -DPIC -o .libs/pcm_softvol.o
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT pcm_extplug.lo -MD -MP -MF ".deps/pcm_extplug.Tpo" -c -o pcm_extplug.lo pcm_extplug.c; \
        then mv -f ".deps/pcm_extplug.Tpo" ".deps/pcm_extplug.Plo"; else rm -f ".deps/pcm_extplug.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -MT pcm_extplug.lo -MD -MP -MF .deps/pcm_extplug.Tpo -c pcm_extplug.c  -fPIC -DPIC -o .libs/pcm_extplug.o
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT pcm_ioplug.lo -MD -MP -MF ".deps/pcm_ioplug.Tpo" -c -o pcm_ioplug.lo pcm_ioplug.c; \
        then mv -f ".deps/pcm_ioplug.Tpo" ".deps/pcm_ioplug.Plo"; else rm -f ".deps/pcm_ioplug.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -MT pcm_ioplug.lo -MD -MP -MF .deps/pcm_ioplug.Tpo -c pcm_ioplug.c  -fPIC -DPIC -o .libs/pcm_ioplug.o
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT pcm_mmap_emul.lo -MD -MP -MF ".deps/pcm_mmap_emul.Tpo" -c -o pcm_mmap_emul.lo pcm_mmap_emul.c; \
        then mv -f ".deps/pcm_mmap_emul.Tpo" ".deps/pcm_mmap_emul.Plo"; else rm -f ".deps/pcm_mmap_emul.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -MT pcm_mmap_emul.lo -MD -MP -MF .deps/pcm_mmap_emul.Tpo -c pcm_mmap_emul.c  -fPIC -DPIC -o .libs/pcm_mmap_emul.o
/bin/bash ../../libtool --tag=CC --mode=link gcc  -g -O2   -o libpcm.la   atomic.lo mask.lo interval.lo pcm.lo pcm_params.lo pcm_simple.lo pcm_hw.lo pcm_misc.lo pcm_mmap.lo pcm_symbols.lo pcm_generic.lo pcm_plugin.lo pcm_copy.lo pcm_linear.lo pcm_route.lo pcm_mulaw.lo pcm_alaw.lo pcm_adpcm.lo pcm_rate.lo pcm_rate_linear.lo pcm_plug.lo pcm_multi.lo pcm_shm.lo pcm_file.lo pcm_null.lo pcm_empty.lo pcm_share.lo pcm_meter.lo pcm_hooks.lo pcm_lfloat.lo pcm_ladspa.lo pcm_dmix.lo pcm_dshare.lo pcm_dsnoop.lo pcm_direct.lo   pcm_asym.lo pcm_iec958.lo pcm_softvol.lo pcm_extplug.lo pcm_ioplug.lo pcm_mmap_emul.lo  
ar cru .libs/libpcm.a .libs/atomic.o .libs/mask.o .libs/interval.o .libs/pcm.o .libs/pcm_params.o .libs/pcm_simple.o .libs/pcm_hw.o .libs/pcm_misc.o .libs/pcm_mmap.o .libs/pcm_symbols.o .libs/pcm_generic.o .libs/pcm_plugin.o .libs/pcm_copy.o .libs/pcm_linear.o .libs/pcm_route.o .libs/pcm_mulaw.o .libs/pcm_alaw.o .libs/pcm_adpcm.o .libs/pcm_rate.o .libs/pcm_rate_linear.o .libs/pcm_plug.o .libs/pcm_multi.o .libs/pcm_shm.o .libs/pcm_file.o .libs/pcm_null.o .libs/pcm_empty.o .libs/pcm_share.o .libs/pcm_meter.o .libs/pcm_hooks.o .libs/pcm_lfloat.o .libs/pcm_ladspa.o .libs/pcm_dmix.o .libs/pcm_dshare.o .libs/pcm_dsnoop.o .libs/pcm_direct.o .libs/pcm_asym.o .libs/pcm_iec958.o .libs/pcm_softvol.o .libs/pcm_extplug.o .libs/pcm_ioplug.o .libs/pcm_mmap_emul.o
ranlib .libs/libpcm.a
creating libpcm.la
(cd .libs && rm -f libpcm.la && ln -s ../libpcm.la libpcm.la)
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/pcm'
Making all in timer
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/timer'
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT timer.lo -MD -MP -MF ".deps/timer.Tpo" -c -o timer.lo timer.c; \
        then mv -f ".deps/timer.Tpo" ".deps/timer.Plo"; else rm -f ".deps/timer.Tpo"; exit 1; fi
mkdir .libs
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -MT timer.lo -MD -MP -MF .deps/timer.Tpo -c timer.c  -fPIC -DPIC -o .libs/timer.o
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT timer_hw.lo -MD -MP -MF ".deps/timer_hw.Tpo" -c -o timer_hw.lo timer_hw.c; \
        then mv -f ".deps/timer_hw.Tpo" ".deps/timer_hw.Plo"; else rm -f ".deps/timer_hw.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -MT timer_hw.lo -MD -MP -MF .deps/timer_hw.Tpo -c timer_hw.c  -fPIC -DPIC -o .libs/timer_hw.o
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT timer_query.lo -MD -MP -MF ".deps/timer_query.Tpo" -c -o timer_query.lo timer_query.c; \
        then mv -f ".deps/timer_query.Tpo" ".deps/timer_query.Plo"; else rm -f ".deps/timer_query.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -MT timer_query.lo -MD -MP -MF .deps/timer_query.Tpo -c timer_query.c  -fPIC -DPIC -o .libs/timer_query.o
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT timer_query_hw.lo -MD -MP -MF ".deps/timer_query_hw.Tpo" -c -o timer_query_hw.lo timer_query_hw.c; \
        then mv -f ".deps/timer_query_hw.Tpo" ".deps/timer_query_hw.Plo"; else rm -f ".deps/timer_query_hw.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -MT timer_query_hw.lo -MD -MP -MF .deps/timer_query_hw.Tpo -c timer_query_hw.c  -fPIC -DPIC -o .libs/timer_query_hw.o
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT timer_symbols.lo -MD -MP -MF ".deps/timer_symbols.Tpo" -c -o timer_symbols.lo timer_symbols.c; \
        then mv -f ".deps/timer_symbols.Tpo" ".deps/timer_symbols.Plo"; else rm -f ".deps/timer_symbols.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -MT timer_symbols.lo -MD -MP -MF .deps/timer_symbols.Tpo -c timer_symbols.c  -fPIC -DPIC -o .libs/timer_symbols.o
/bin/bash ../../libtool --tag=CC --mode=link gcc  -g -O2   -o libtimer.la   timer.lo timer_hw.lo timer_query.lo timer_query_hw.lo timer_symbols.lo  
ar cru .libs/libtimer.a .libs/timer.o .libs/timer_hw.o .libs/timer_query.o .libs/timer_query_hw.o .libs/timer_symbols.o
ranlib .libs/libtimer.a
creating libtimer.la
(cd .libs && rm -f libtimer.la && ln -s ../libtimer.la libtimer.la)
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/timer'
Making all in rawmidi
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/rawmidi'
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT rawmidi.lo -MD -MP -MF ".deps/rawmidi.Tpo" -c -o rawmidi.lo rawmidi.c; \
        then mv -f ".deps/rawmidi.Tpo" ".deps/rawmidi.Plo"; else rm -f ".deps/rawmidi.Tpo"; exit 1; fi
mkdir .libs
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -MT rawmidi.lo -MD -MP -MF .deps/rawmidi.Tpo -c rawmidi.c  -fPIC -DPIC -o .libs/rawmidi.o
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT rawmidi_hw.lo -MD -MP -MF ".deps/rawmidi_hw.Tpo" -c -o rawmidi_hw.lo rawmidi_hw.c; \
        then mv -f ".deps/rawmidi_hw.Tpo" ".deps/rawmidi_hw.Plo"; else rm -f ".deps/rawmidi_hw.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -MT rawmidi_hw.lo -MD -MP -MF .deps/rawmidi_hw.Tpo -c rawmidi_hw.c  -fPIC -DPIC -o .libs/rawmidi_hw.o
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT rawmidi_symbols.lo -MD -MP -MF ".deps/rawmidi_symbols.Tpo" -c -o rawmidi_symbols.lo rawmidi_symbols.c; \
        then mv -f ".deps/rawmidi_symbols.Tpo" ".deps/rawmidi_symbols.Plo"; else rm -f ".deps/rawmidi_symbols.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -MT rawmidi_symbols.lo -MD -MP -MF .deps/rawmidi_symbols.Tpo -c rawmidi_symbols.c  -fPIC -DPIC -o .libs/rawmidi_symbols.o
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT rawmidi_virt.lo -MD -MP -MF ".deps/rawmidi_virt.Tpo" -c -o rawmidi_virt.lo rawmidi_virt.c; \
        then mv -f ".deps/rawmidi_virt.Tpo" ".deps/rawmidi_virt.Plo"; else rm -f ".deps/rawmidi_virt.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -MT rawmidi_virt.lo -MD -MP -MF .deps/rawmidi_virt.Tpo -c rawmidi_virt.c  -fPIC -DPIC -o .libs/rawmidi_virt.o
/bin/bash ../../libtool --tag=CC --mode=link gcc  -g -O2   -o librawmidi.la   rawmidi.lo rawmidi_hw.lo rawmidi_symbols.lo rawmidi_virt.lo  
ar cru .libs/librawmidi.a .libs/rawmidi.o .libs/rawmidi_hw.o .libs/rawmidi_symbols.o .libs/rawmidi_virt.o
ranlib .libs/librawmidi.a
creating librawmidi.la
(cd .libs && rm -f librawmidi.la && ln -s ../librawmidi.la librawmidi.la)
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/rawmidi'
Making all in hwdep
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/hwdep'
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT hwdep.lo -MD -MP -MF ".deps/hwdep.Tpo" -c -o hwdep.lo hwdep.c; \
        then mv -f ".deps/hwdep.Tpo" ".deps/hwdep.Plo"; else rm -f ".deps/hwdep.Tpo"; exit 1; fi
mkdir .libs
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -MT hwdep.lo -MD -MP -MF .deps/hwdep.Tpo -c hwdep.c  -fPIC -DPIC -o .libs/hwdep.o
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT hwdep_hw.lo -MD -MP -MF ".deps/hwdep_hw.Tpo" -c -o hwdep_hw.lo hwdep_hw.c; \
        then mv -f ".deps/hwdep_hw.Tpo" ".deps/hwdep_hw.Plo"; else rm -f ".deps/hwdep_hw.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -MT hwdep_hw.lo -MD -MP -MF .deps/hwdep_hw.Tpo -c hwdep_hw.c  -fPIC -DPIC -o .libs/hwdep_hw.o
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT hwdep_symbols.lo -MD -MP -MF ".deps/hwdep_symbols.Tpo" -c -o hwdep_symbols.lo hwdep_symbols.c; \
        then mv -f ".deps/hwdep_symbols.Tpo" ".deps/hwdep_symbols.Plo"; else rm -f ".deps/hwdep_symbols.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -MT hwdep_symbols.lo -MD -MP -MF .deps/hwdep_symbols.Tpo -c hwdep_symbols.c  -fPIC -DPIC -o .libs/hwdep_symbols.o
/bin/bash ../../libtool --tag=CC --mode=link gcc  -g -O2   -o libhwdep.la   hwdep.lo hwdep_hw.lo hwdep_symbols.lo  
ar cru .libs/libhwdep.a .libs/hwdep.o .libs/hwdep_hw.o .libs/hwdep_symbols.o
ranlib .libs/libhwdep.a
creating libhwdep.la
(cd .libs && rm -f libhwdep.la && ln -s ../libhwdep.la libhwdep.la)
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/hwdep'
Making all in seq
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/seq'
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT seq_hw.lo -MD -MP -MF ".deps/seq_hw.Tpo" -c -o seq_hw.lo seq_hw.c; \
        then mv -f ".deps/seq_hw.Tpo" ".deps/seq_hw.Plo"; else rm -f ".deps/seq_hw.Tpo"; exit 1; fi
mkdir .libs
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -MT seq_hw.lo -MD -MP -MF .deps/seq_hw.Tpo -c seq_hw.c  -fPIC -DPIC -o .libs/seq_hw.o
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT seq.lo -MD -MP -MF ".deps/seq.Tpo" -c -o seq.lo seq.c; \
        then mv -f ".deps/seq.Tpo" ".deps/seq.Plo"; else rm -f ".deps/seq.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -MT seq.lo -MD -MP -MF .deps/seq.Tpo -c seq.c  -fPIC -DPIC -o .libs/seq.o
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT seq_event.lo -MD -MP -MF ".deps/seq_event.Tpo" -c -o seq_event.lo seq_event.c; \
        then mv -f ".deps/seq_event.Tpo" ".deps/seq_event.Plo"; else rm -f ".deps/seq_event.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -MT seq_event.lo -MD -MP -MF .deps/seq_event.Tpo -c seq_event.c  -fPIC -DPIC -o .libs/seq_event.o
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT seqmid.lo -MD -MP -MF ".deps/seqmid.Tpo" -c -o seqmid.lo seqmid.c; \
        then mv -f ".deps/seqmid.Tpo" ".deps/seqmid.Plo"; else rm -f ".deps/seqmid.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -MT seqmid.lo -MD -MP -MF .deps/seqmid.Tpo -c seqmid.c  -fPIC -DPIC -o .libs/seqmid.o
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT seq_midi_event.lo -MD -MP -MF ".deps/seq_midi_event.Tpo" -c -o seq_midi_event.lo seq_midi_event.c; \
        then mv -f ".deps/seq_midi_event.Tpo" ".deps/seq_midi_event.Plo"; else rm -f ".deps/seq_midi_event.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -MT seq_midi_event.lo -MD -MP -MF .deps/seq_midi_event.Tpo -c seq_midi_event.c  -fPIC -DPIC -o .libs/seq_midi_event.o
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT seq_symbols.lo -MD -MP -MF ".deps/seq_symbols.Tpo" -c -o seq_symbols.lo seq_symbols.c; \
        then mv -f ".deps/seq_symbols.Tpo" ".deps/seq_symbols.Plo"; else rm -f ".deps/seq_symbols.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -MT seq_symbols.lo -MD -MP -MF .deps/seq_symbols.Tpo -c seq_symbols.c  -fPIC -DPIC -o .libs/seq_symbols.o
/bin/bash ../../libtool --tag=CC --mode=link gcc  -g -O2   -o libseq.la   seq_hw.lo seq.lo seq_event.lo seqmid.lo seq_midi_event.lo seq_symbols.lo  
ar cru .libs/libseq.a .libs/seq_hw.o .libs/seq.o .libs/seq_event.o .libs/seqmid.o .libs/seq_midi_event.o .libs/seq_symbols.o
ranlib .libs/libseq.a
creating libseq.la
(cd .libs && rm -f libseq.la && ln -s ../libseq.la libseq.la)
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/seq'
Making all in instr
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/instr'
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT fm.lo -MD -MP -MF ".deps/fm.Tpo" -c -o fm.lo fm.c; \
        then mv -f ".deps/fm.Tpo" ".deps/fm.Plo"; else rm -f ".deps/fm.Tpo"; exit 1; fi
mkdir .libs
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -MT fm.lo -MD -MP -MF .deps/fm.Tpo -c fm.c  -fPIC -DPIC -o .libs/fm.o
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT simple.lo -MD -MP -MF ".deps/simple.Tpo" -c -o simple.lo simple.c; \
        then mv -f ".deps/simple.Tpo" ".deps/simple.Plo"; else rm -f ".deps/simple.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -MT simple.lo -MD -MP -MF .deps/simple.Tpo -c simple.c  -fPIC -DPIC -o .libs/simple.o
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT iwffff.lo -MD -MP -MF ".deps/iwffff.Tpo" -c -o iwffff.lo iwffff.c; \
        then mv -f ".deps/iwffff.Tpo" ".deps/iwffff.Plo"; else rm -f ".deps/iwffff.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -MT iwffff.lo -MD -MP -MF .deps/iwffff.Tpo -c iwffff.c  -fPIC -DPIC -o .libs/iwffff.o
/bin/bash ../../libtool --tag=CC --mode=link gcc  -g -O2   -o libinstr.la   fm.lo simple.lo iwffff.lo  
ar cru .libs/libinstr.a .libs/fm.o .libs/simple.o .libs/iwffff.o
ranlib .libs/libinstr.a
creating libinstr.la
(cd .libs && rm -f libinstr.la && ln -s ../libinstr.la libinstr.la)
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/instr'
Making all in alisp
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/alisp'
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT alisp.lo -MD -MP -MF ".deps/alisp.Tpo" -c -o alisp.lo alisp.c; \
        then mv -f ".deps/alisp.Tpo" ".deps/alisp.Plo"; else rm -f ".deps/alisp.Tpo"; exit 1; fi
mkdir .libs
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -MT alisp.lo -MD -MP -MF .deps/alisp.Tpo -c alisp.c  -fPIC -DPIC -o .libs/alisp.o
/bin/bash ../../libtool --tag=CC --mode=link gcc  -g -O2   -o libalisp.la   alisp.lo  
ar cru .libs/libalisp.a .libs/alisp.o
ranlib .libs/libalisp.a
creating libalisp.la
(cd .libs && rm -f libalisp.la && ln -s ../libalisp.la libalisp.la)
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/alisp'
Making all in compat
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/compat'
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include     -g -O2 -MT empty.lo -MD -MP -MF ".deps/empty.Tpo" -c -o empty.lo empty.c; \
        then mv -f ".deps/empty.Tpo" ".deps/empty.Plo"; else rm -f ".deps/empty.Tpo"; exit 1; fi
mkdir .libs
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -g -O2 -MT empty.lo -MD -MP -MF .deps/empty.Tpo -c empty.c  -fPIC -DPIC -o .libs/empty.o
/bin/bash ../../libtool --tag=CC --mode=link gcc  -g -O2   -o libcompat.la   empty.lo  
ar cru .libs/libcompat.a .libs/empty.o
ranlib .libs/libcompat.a
[u]creating libcompat.la
(cd .libs && rm -f libcompat.la && ln -s ../libcompat.la libcompat.la)
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/compat'
Making all in conf
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/conf'
Making all in cards
make[3]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/conf/cards'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/conf/cards'
Making all in pcm
make[3]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/conf/pcm'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/conf/pcm'
make[3]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/conf'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/conf'
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/conf'
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src'[/u]
if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include    -g -O2 -MT conf.lo -MD -MP -MF ".deps/conf.Tpo" -c -o conf.lo conf.c; \
        then mv -f ".deps/conf.Tpo" ".deps/conf.Plo"; else rm -f ".deps/conf.Tpo"; exit 1; fi
mkdir .libs
 gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include -g -O2 -MT conf.lo -MD -MP -MF .deps/conf.Tpo -c conf.c  -fPIC -DPIC -o .libs/conf.o
if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include    -g -O2 -MT confmisc.lo -MD -MP -MF ".deps/confmisc.Tpo" -c -o confmisc.lo confmisc.c; \
        then mv -f ".deps/confmisc.Tpo" ".deps/confmisc.Plo"; else rm -f ".deps/confmisc.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include -g -O2 -MT confmisc.lo -MD -MP -MF .deps/confmisc.Tpo -c confmisc.c  -fPIC -DPIC -o .libs/confmisc.o
if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include    -g -O2 -MT input.lo -MD -MP -MF ".deps/input.Tpo" -c -o input.lo input.c; \
        then mv -f ".deps/input.Tpo" ".deps/input.Plo"; else rm -f ".deps/input.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include -g -O2 -MT input.lo -MD -MP -MF .deps/input.Tpo -c input.c  -fPIC -DPIC -o .libs/input.o
if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include    -g -O2 -MT output.lo -MD -MP -MF ".deps/output.Tpo" -c -o output.lo output.c; \
        then mv -f ".deps/output.Tpo" ".deps/output.Plo"; else rm -f ".deps/output.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include -g -O2 -MT output.lo -MD -MP -MF .deps/output.Tpo -c output.c  -fPIC -DPIC -o .libs/output.o
if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include    -g -O2 -MT async.lo -MD -MP -MF ".deps/async.Tpo" -c -o async.lo async.c; \
        then mv -f ".deps/async.Tpo" ".deps/async.Plo"; else rm -f ".deps/async.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include -g -O2 -MT async.lo -MD -MP -MF .deps/async.Tpo -c async.c  -fPIC -DPIC -o .libs/async.o
if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include    -g -O2 -MT error.lo -MD -MP -MF ".deps/error.Tpo" -c -o error.lo error.c; \
        then mv -f ".deps/error.Tpo" ".deps/error.Plo"; else rm -f ".deps/error.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include -g -O2 -MT error.lo -MD -MP -MF .deps/error.Tpo -c error.c  -fPIC -DPIC -o .libs/error.o
if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include    -g -O2 -MT dlmisc.lo -MD -MP -MF ".deps/dlmisc.Tpo" -c -o dlmisc.lo dlmisc.c; \
        then mv -f ".deps/dlmisc.Tpo" ".deps/dlmisc.Plo"; else rm -f ".deps/dlmisc.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include -g -O2 -MT dlmisc.lo -MD -MP -MF .deps/dlmisc.Tpo -c dlmisc.c  -fPIC -DPIC -o .libs/dlmisc.o
if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include    -g -O2 -MT socket.lo -MD -MP -MF ".deps/socket.Tpo" -c -o socket.lo socket.c; \
        then mv -f ".deps/socket.Tpo" ".deps/socket.Plo"; else rm -f ".deps/socket.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include -g -O2 -MT socket.lo -MD -MP -MF .deps/socket.Tpo -c socket.c  -fPIC -DPIC -o .libs/socket.o
if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include    -g -O2 -MT shmarea.lo -MD -MP -MF ".deps/shmarea.Tpo" -c -o shmarea.lo shmarea.c; \
        then mv -f ".deps/shmarea.Tpo" ".deps/shmarea.Plo"; else rm -f ".deps/shmarea.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include -g -O2 -MT shmarea.lo -MD -MP -MF .deps/shmarea.Tpo -c shmarea.c  -fPIC -DPIC -o .libs/shmarea.o
if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include    -g -O2 -MT userfile.lo -MD -MP -MF ".deps/userfile.Tpo" -c -o userfile.lo userfile.c; \
        then mv -f ".deps/userfile.Tpo" ".deps/userfile.Plo"; else rm -f ".deps/userfile.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include -g -O2 -MT userfile.lo -MD -MP -MF .deps/userfile.Tpo -c userfile.c  -fPIC -DPIC -o .libs/userfile.o
if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include    -g -O2 -MT names.lo -MD -MP -MF ".deps/names.Tpo" -c -o names.lo names.c; \
        then mv -f ".deps/names.Tpo" ".deps/names.Plo"; else rm -f ".deps/names.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include -g -O2 -MT names.lo -MD -MP -MF .deps/names.Tpo -c names.c  -fPIC -DPIC -o .libs/names.o
/bin/bash ../libtool --tag=CC --mode=link gcc  -g -O2   -o libasound.la -rpath /usr/lib -version-info 2:0:0 -Wl,--version-script=Versions  conf.lo confmisc.lo input.lo output.lo async.lo error.lo dlmisc.lo socket.lo shmarea.lo userfile.lo names.lo control/libcontrol.la mixer/libmixer.la pcm/libpcm.la timer/libtimer.la rawmidi/librawmidi.la hwdep/libhwdep.la seq/libseq.la instr/libinstr.la alisp/libalisp.la compat/libcompat.la -lm -ldl -lpthread 
gcc -shared  .libs/conf.o .libs/confmisc.o .libs/input.o .libs/output.o .libs/async.o .libs/error.o .libs/dlmisc.o .libs/socket.o .libs/shmarea.o .libs/userfile.o .libs/names.o -Wl,--whole-archive control/.libs/libcontrol.a mixer/.libs/libmixer.a pcm/.libs/libpcm.a timer/.libs/libtimer.a rawmidi/.libs/librawmidi.a hwdep/.libs/libhwdep.a seq/.libs/libseq.a instr/.libs/libinstr.a alisp/.libs/libalisp.a compat/.libs/libcompat.a -Wl,--no-whole-archive  -lm -ldl -lpthread  -Wl,--version-script=Versions -Wl,-soname -Wl,libasound.so.2 -o .libs/libasound.so.2.0.0
(cd .libs && rm -f libasound.so.2 && ln -s libasound.so.2.0.0 libasound.so.2)
(cd .libs && rm -f libasound.so && ln -s libasound.so.2.0.0 libasound.so)
creating libasound.la
(cd .libs && rm -f libasound.la && ln -s ../libasound.la libasound.la)
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src'
make[1]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src'
Making all in modules
make[1]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/modules'
Making all in mixer
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/modules/mixer'
Making all in simple
make[3]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/modules/mixer/simple'
if /bin/bash ../../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../../include -I../../../include   -g -O2 -W -Wall -g -O2 -MT sbase.lo -MD -MP -MF ".deps/sbase.Tpo" -c -o sbase.lo sbase.c; \
        then mv -f ".deps/sbase.Tpo" ".deps/sbase.Plo"; else rm -f ".deps/sbase.Tpo"; exit 1; fi
mkdir .libs
 gcc -DHAVE_CONFIG_H -I. -I. -I../../../include -I../../../include -g -O2 -W -Wall -g -O2 -MT sbase.lo -MD -MP -MF .deps/sbase.Tpo -c sbase.c  -fPIC -DPIC -o .libs/sbase.o
/bin/bash ../../../libtool --tag=CC --mode=link gcc -g -O2 -W -Wall -g -O2   -o smixer-sbase.la -rpath /usr/lib/alsa-lib/smixer -module -avoid-version sbase.lo ../../../src/libasound.la 
gcc -shared  .libs/sbase.o  -Wl,--rpath -Wl,/home/francesco/alsa/alsa-lib-1.0.15rc3/src/.libs ../../../src/.libs/libasound.so  -Wl,-soname -Wl,smixer-sbase.so -o .libs/smixer-sbase.so
creating smixer-sbase.la
(cd .libs && rm -f smixer-sbase.la && ln -s ../smixer-sbase.la smixer-sbase.la)
if /bin/bash ../../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../../include -I../../../include   -g -O2 -W -Wall -g -O2 -MT ac97.lo -MD -MP -MF ".deps/ac97.Tpo" -c -o ac97.lo ac97.c; \
        then mv -f ".deps/ac97.Tpo" ".deps/ac97.Plo"; else rm -f ".deps/ac97.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../../../include -I../../../include -g -O2 -W -Wall -g -O2 -MT ac97.lo -MD -MP -MF .deps/ac97.Tpo -c ac97.c  -fPIC -DPIC -o .libs/ac97.o
if /bin/bash ../../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../../include -I../../../include   -g -O2 -W -Wall -g -O2 -MT sbasedl.lo -MD -MP -MF ".deps/sbasedl.Tpo" -c -o sbasedl.lo sbasedl.c; \
        then mv -f ".deps/sbasedl.Tpo" ".deps/sbasedl.Plo"; else rm -f ".deps/sbasedl.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../../../include -I../../../include -g -O2 -W -Wall -g -O2 -MT sbasedl.lo -MD -MP -MF .deps/sbasedl.Tpo -c sbasedl.c  -fPIC -DPIC -o .libs/sbasedl.o
/bin/bash ../../../libtool --tag=CC --mode=link gcc -g -O2 -W -Wall -g -O2   -o smixer-ac97.la -rpath /usr/lib/alsa-lib/smixer -module -avoid-version ac97.lo sbasedl.lo ../../../src/libasound.la 
gcc -shared  .libs/ac97.o .libs/sbasedl.o  -Wl,--rpath -Wl,/home/francesco/alsa/alsa-lib-1.0.15rc3/src/.libs ../../../src/.libs/libasound.so  -Wl,-soname -Wl,smixer-ac97.so -o .libs/smixer-ac97.so
creating smixer-ac97.la
(cd .libs && rm -f smixer-ac97.la && ln -s ../smixer-ac97.la smixer-ac97.la)
if /bin/bash ../../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../../include -I../../../include   -g -O2 -W -Wall -g -O2 -MT hda.lo -MD -MP -MF ".deps/hda.Tpo" -c -o hda.lo hda.c; \
        then mv -f ".deps/hda.Tpo" ".deps/hda.Plo"; else rm -f ".deps/hda.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I../../../include -I../../../include -g -O2 -W -Wall -g -O2 -MT hda.lo -MD -MP -MF .deps/hda.Tpo -c hda.c  -fPIC -DPIC -o .libs/hda.o
/bin/bash ../../../libtool --tag=CC --mode=link gcc -g -O2 -W -Wall -g -O2   -o smixer-hda.la -rpath /usr/lib/alsa-lib/smixer -module -avoid-version hda.lo sbasedl.lo ../../../src/libasound.la 
gcc -shared  .libs/hda.o .libs/sbasedl.o  -Wl,--rpath -Wl,/home/francesco/alsa/alsa-lib-1.0.15rc3/src/.libs ../../../src/.libs/libasound.so  -Wl,-soname -Wl,smixer-hda.so -o .libs/smixer-hda.so
creating smixer-hda.la
[u](cd .libs && rm -f smixer-hda.la && ln -s ../smixer-hda.la smixer-hda.la)
make[3]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/modules/mixer/simple'
make[3]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/modules/mixer'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/modules/mixer'
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/modules/mixer'
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/modules'
make[2]: Nothing to be done for `all-am'.
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/modules'
make[1]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/modules'
Making all in aserver[/u]
make[1]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/aserver'
if gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include -I../src/pcm    -g -O2 -MT aserver.o -MD -MP -MF ".deps/aserver.Tpo" -c -o aserver.o aserver.c; \
        then mv -f ".deps/aserver.Tpo" ".deps/aserver.Po"; else rm -f ".deps/aserver.Tpo"; exit 1; fi
/bin/bash ../libtool --tag=CC --mode=link gcc  -g -O2   -o aserver  aserver.o ../src/libasound.la 
mkdir .libs
gcc -g -O2 -o .libs/aserver aserver.o  ../src/.libs/libasound.so -lm -ldl -lpthread
creating aserver
make[1]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/aserver'
Making all in alsalisp
make[1]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/alsalisp'
if gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include -I../src/alisp    -g -O2 -MT alsalisp.o -MD -MP -MF ".deps/alsalisp.Tpo" -c -o alsalisp.o alsalisp.c; \
        then mv -f ".deps/alsalisp.Tpo" ".deps/alsalisp.Po"; else rm -f ".deps/alsalisp.Tpo"; exit 1; fi
/bin/bash ../libtool --tag=CC --mode=link gcc  -g -O2   -o alsalisp  alsalisp.o ../src/libasound.la 
mkdir .libs
gcc -g -O2 -o .libs/alsalisp alsalisp.o  ../src/.libs/libasound.so -lm -ldl -lpthread
[u]creating alsalisp
make[1]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/alsalisp'
Making all in test
make[1]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/test'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/test'
Making all in utils
make[1]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/utils'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/utils'
make[1]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3'
make[1]: Nothing to be done for `all-am'.
make[1]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3'[/u]
francesco@francesco-desktop:~/alsa/alsa-lib-1.0.15rc3$ 

Questo è da 1 certo punto in poi perchè non sono riuscito a mettere tutto...quello che mi lascia perplesso sono i punti che ho sottolineato...."nothing to do with..." boh...

[frafer90]

POI

faccio

Codice: Seleziona tutto

sudo make install

e...

Codice: Seleziona tutto

francesco@francesco-desktop:~/alsa/alsa-lib-1.0.15rc3$ sudo make install
Making install in doc
make[1]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/doc'
Making install in pictures
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/doc/pictures'
make[3]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/doc/pictures'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/doc/pictures'
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/doc/pictures'
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/doc'
make[3]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/doc'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/doc'
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/doc'
make[1]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/doc'
Making install in include
make[1]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/include'
Making install in sound
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/include/sound'
make[3]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/include/sound'
make[3]: Nothing to be done for `install-exec-am'.
test -z "/usr/include/alsa/sound" || mkdir -p -- "/usr/include/alsa/sound"
 /usr/bin/install -c -m 644 'ainstr_fm.h' '/usr/include/alsa/sound/ainstr_fm.h'
 /usr/bin/install -c -m 644 'ainstr_gf1.h' '/usr/include/alsa/sound/ainstr_gf1.h'
 /usr/bin/install -c -m 644 'ainstr_simple.h' '/usr/include/alsa/sound/ainstr_simple.h'
 /usr/bin/install -c -m 644 'ainstr_iw.h' '/usr/include/alsa/sound/ainstr_iw.h'
 /usr/bin/install -c -m 644 'asound_fm.h' '/usr/include/alsa/sound/asound_fm.h'
 /usr/bin/install -c -m 644 'hdsp.h' '/usr/include/alsa/sound/hdsp.h'
 /usr/bin/install -c -m 644 'sb16_csp.h' '/usr/include/alsa/sound/sb16_csp.h'
 /usr/bin/install -c -m 644 'sscape_ioctl.h' '/usr/include/alsa/sound/sscape_ioctl.h'
 /usr/bin/install -c -m 644 'emu10k1.h' '/usr/include/alsa/sound/emu10k1.h'
 /usr/bin/install -c -m 644 'type_compat.h' '/usr/include/alsa/sound/type_compat.h'
make[3]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/include/sound'
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/include/sound'
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/include'
make[3]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/include'
make[3]: Nothing to be done for `install-exec-am'.
test -z "/usr/include/alsa" || mkdir -p -- "/usr/include/alsa"
 /usr/bin/install -c -m 644 'asoundlib.h' '/usr/include/alsa/asoundlib.h'
 /usr/bin/install -c -m 644 'asoundef.h' '/usr/include/alsa/asoundef.h'
 /usr/bin/install -c -m 644 'version.h' '/usr/include/alsa/version.h'
 /usr/bin/install -c -m 644 'global.h' '/usr/include/alsa/global.h'
 /usr/bin/install -c -m 644 'input.h' '/usr/include/alsa/input.h'
 /usr/bin/install -c -m 644 'output.h' '/usr/include/alsa/output.h'
 /usr/bin/install -c -m 644 'error.h' '/usr/include/alsa/error.h'
 /usr/bin/install -c -m 644 'conf.h' '/usr/include/alsa/conf.h'
 /usr/bin/install -c -m 644 'control.h' '/usr/include/alsa/control.h'
 /usr/bin/install -c -m 644 'iatomic.h' '/usr/include/alsa/iatomic.h'
 /usr/bin/install -c -m 644 'control_external.h' '/usr/include/alsa/control_external.h'
 /usr/bin/install -c -m 644 'pcm.h' '/usr/include/alsa/pcm.h'
 /usr/bin/install -c -m 644 'pcm_old.h' '/usr/include/alsa/pcm_old.h'
 /usr/bin/install -c -m 644 'timer.h' '/usr/include/alsa/timer.h'
 /usr/bin/install -c -m 644 'pcm_plugin.h' '/usr/include/alsa/pcm_plugin.h'
 /usr/bin/install -c -m 644 'pcm_rate.h' '/usr/include/alsa/pcm_rate.h'
 /usr/bin/install -c -m 644 'pcm_external.h' '/usr/include/alsa/pcm_external.h'
 /usr/bin/install -c -m 644 'pcm_extplug.h' '/usr/include/alsa/pcm_extplug.h'
 /usr/bin/install -c -m 644 'pcm_ioplug.h' '/usr/include/alsa/pcm_ioplug.h'
 /usr/bin/install -c -m 644 'rawmidi.h' '/usr/include/alsa/rawmidi.h'
 /usr/bin/install -c -m 644 'hwdep.h' '/usr/include/alsa/hwdep.h'
 /usr/bin/install -c -m 644 'mixer.h' '/usr/include/alsa/mixer.h'
 /usr/bin/install -c -m 644 'mixer_abst.h' '/usr/include/alsa/mixer_abst.h'
 /usr/bin/install -c -m 644 'seq_event.h' '/usr/include/alsa/seq_event.h'
 /usr/bin/install -c -m 644 'seq.h' '/usr/include/alsa/seq.h'
 /usr/bin/install -c -m 644 'seqmid.h' '/usr/include/alsa/seqmid.h'
 /usr/bin/install -c -m 644 'seq_midi_event.h' '/usr/include/alsa/seq_midi_event.h'
 /usr/bin/install -c -m 644 'conv.h' '/usr/include/alsa/conv.h'
 /usr/bin/install -c -m 644 'instr.h' '/usr/include/alsa/instr.h'
 /usr/bin/install -c -m 644 'alisp.h' '/usr/include/alsa/alisp.h'
make  install-data-hook
make[4]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/include'
test -d /usr/include/sys || mkdir -p /usr/include/sys
/usr/bin/install -c -m 644 ./sys.h /usr/include/sys/asoundlib.h
make[4]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/include'
make[3]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/include'
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/include'
make[1]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/include'
Making install in src
make[1]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src'
Making install in control
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/control'
make[3]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/control'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/control'
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/control'
Making install in mixer
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/mixer'
make[3]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/mixer'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/mixer'
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/mixer'
Making install in pcm
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/pcm'
make[3]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/pcm'
make[4]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/pcm'
make[4]: Nothing to be done for `install-exec-am'.
make[4]: Nothing to be done for `install-data-am'.
make[4]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/pcm'
make[3]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/pcm'
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/pcm'
Making install in timer
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/timer'
make[3]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/timer'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/timer'
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/timer'
Making install in rawmidi
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/rawmidi'
make[3]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/rawmidi'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/rawmidi'
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/rawmidi'
Making install in hwdep
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/hwdep'
make[3]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/hwdep'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/hwdep'
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/hwdep'
Making install in seq
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/seq'
make[3]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/seq'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/seq'
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/seq'
Making install in instr
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/instr'
make[3]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/instr'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/instr'
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/instr'
Making install in alisp
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/alisp'
make[3]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/alisp'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/alisp'
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/alisp'
Making install in compat
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/compat'
make[3]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/compat'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/compat'
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/compat'
Making install in conf
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/conf'
Making install in cards
make[3]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/conf/cards'
make[4]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/conf/cards'
make[4]: Nothing to be done for `install-exec-am'.
test -z "/usr/share/alsa/cards/SI7018" || mkdir -p -- "/usr/share/alsa/cards/SI7018"
 /usr/bin/install -c -m 644 'SI7018/sndoc-mixer.alisp' '/usr/share/alsa/cards/SI7018/sndoc-mixer.alisp'
 /usr/bin/install -c -m 644 'SI7018/sndop-mixer.alisp' '/usr/share/alsa/cards/SI7018/sndop-mixer.alisp'
test -z "/usr/share/alsa/cards" || mkdir -p -- "/usr/share/alsa/cards"
 /usr/bin/install -c -m 644 'aliases.conf' '/usr/share/alsa/cards/aliases.conf'
 /usr/bin/install -c -m 644 'AACI.conf' '/usr/share/alsa/cards/AACI.conf'
 /usr/bin/install -c -m 644 'ATIIXP.conf' '/usr/share/alsa/cards/ATIIXP.conf'
 /usr/bin/install -c -m 644 'ATIIXP-SPDMA.conf' '/usr/share/alsa/cards/ATIIXP-SPDMA.conf'
 /usr/bin/install -c -m 644 'ATIIXP-MODEM.conf' '/usr/share/alsa/cards/ATIIXP-MODEM.conf'
 /usr/bin/install -c -m 644 'AU8810.conf' '/usr/share/alsa/cards/AU8810.conf'
 /usr/bin/install -c -m 644 'AU8820.conf' '/usr/share/alsa/cards/AU8820.conf'
 /usr/bin/install -c -m 644 'AU8830.conf' '/usr/share/alsa/cards/AU8830.conf'
 /usr/bin/install -c -m 644 'Audigy.conf' '/usr/share/alsa/cards/Audigy.conf'
 /usr/bin/install -c -m 644 'Audigy2.conf' '/usr/share/alsa/cards/Audigy2.conf'
 /usr/bin/install -c -m 644 'Aureon51.conf' '/usr/share/alsa/cards/Aureon51.conf'
 /usr/bin/install -c -m 644 'Aureon71.conf' '/usr/share/alsa/cards/Aureon71.conf'
 /usr/bin/install -c -m 644 'CA0106.conf' '/usr/share/alsa/cards/CA0106.conf'
 /usr/bin/install -c -m 644 'CMI8338.conf' '/usr/share/alsa/cards/CMI8338.conf'
 /usr/bin/install -c -m 644 'CMI8338-SWIEC.conf' '/usr/share/alsa/cards/CMI8338-SWIEC.conf'
 /usr/bin/install -c -m 644 'CMI8738-MC6.conf' '/usr/share/alsa/cards/CMI8738-MC6.conf'
 /usr/bin/install -c -m 644 'CMI8738-MC8.conf' '/usr/share/alsa/cards/CMI8738-MC8.conf'
 /usr/bin/install -c -m 644 'CMI8788.conf' '/usr/share/alsa/cards/CMI8788.conf'
 /usr/bin/install -c -m 644 'CS46xx.conf' '/usr/share/alsa/cards/CS46xx.conf'
 /usr/bin/install -c -m 644 'EMU10K1.conf' '/usr/share/alsa/cards/EMU10K1.conf'
 /usr/bin/install -c -m 644 'EMU10K1X.conf' '/usr/share/alsa/cards/EMU10K1X.conf'
 /usr/bin/install -c -m 644 'ENS1370.conf' '/usr/share/alsa/cards/ENS1370.conf'
 /usr/bin/install -c -m 644 'ENS1371.conf' '/usr/share/alsa/cards/ENS1371.conf'
 /usr/bin/install -c -m 644 'ES1968.conf' '/usr/share/alsa/cards/ES1968.conf'
 /usr/bin/install -c -m 644 'FM801.conf' '/usr/share/alsa/cards/FM801.conf'
 /usr/bin/install -c -m 644 'GUS.conf' '/usr/share/alsa/cards/GUS.conf'
 /usr/bin/install -c -m 644 'HDA-Intel.conf' '/usr/share/alsa/cards/HDA-Intel.conf'
 /usr/bin/install -c -m 644 'ICE1712.conf' '/usr/share/alsa/cards/ICE1712.conf'
 /usr/bin/install -c -m 644 'ICE1724.conf' '/usr/share/alsa/cards/ICE1724.conf'
 /usr/bin/install -c -m 644 'ICH.conf' '/usr/share/alsa/cards/ICH.conf'
 /usr/bin/install -c -m 644 'ICH4.conf' '/usr/share/alsa/cards/ICH4.conf'
 /usr/bin/install -c -m 644 'ICH-MODEM.conf' '/usr/share/alsa/cards/ICH-MODEM.conf'
 /usr/bin/install -c -m 644 'Maestro3.conf' '/usr/share/alsa/cards/Maestro3.conf'
 /usr/bin/install -c -m 644 'NFORCE.conf' '/usr/share/alsa/cards/NFORCE.conf'
 /usr/bin/install -c -m 644 'PC-Speaker.conf' '/usr/share/alsa/cards/PC-Speaker.conf'
 /usr/bin/install -c -m 644 'PMac.conf' '/usr/share/alsa/cards/PMac.conf'
 /usr/bin/install -c -m 644 'PMacToonie.conf' '/usr/share/alsa/cards/PMacToonie.conf'
 /usr/bin/install -c -m 644 'PS3.conf' '/usr/share/alsa/cards/PS3.conf'
 /usr/bin/install -c -m 644 'RME9636.conf' '/usr/share/alsa/cards/RME9636.conf'
 /usr/bin/install -c -m 644 'RME9652.conf' '/usr/share/alsa/cards/RME9652.conf'
 /usr/bin/install -c -m 644 'SI7018.conf' '/usr/share/alsa/cards/SI7018.conf'
 /usr/bin/install -c -m 644 'TRID4DWAVENX.conf' '/usr/share/alsa/cards/TRID4DWAVENX.conf'
 /usr/bin/install -c -m 644 'USB-Audio.conf' '/usr/share/alsa/cards/USB-Audio.conf'
 /usr/bin/install -c -m 644 'YMF744.conf' '/usr/share/alsa/cards/YMF744.conf'
 /usr/bin/install -c -m 644 'VIA686A.conf' '/usr/share/alsa/cards/VIA686A.conf'
 /usr/bin/install -c -m 644 'VIA8233.conf' '/usr/share/alsa/cards/VIA8233.conf'
 /usr/bin/install -c -m 644 'VIA8233A.conf' '/usr/share/alsa/cards/VIA8233A.conf'
 /usr/bin/install -c -m 644 'VIA8237.conf' '/usr/share/alsa/cards/VIA8237.conf'
 /usr/bin/install -c -m 644 'VX222.conf' '/usr/share/alsa/cards/VX222.conf'
 /usr/bin/install -c -m 644 'VXPocket.conf' '/usr/share/alsa/cards/VXPocket.conf'
 /usr/bin/install -c -m 644 'VXPocket440.conf' '/usr/share/alsa/cards/VXPocket440.conf'
 /usr/bin/install -c -m 644 'aliases.alisp' '/usr/share/alsa/cards/aliases.alisp'
make[4]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/conf/cards'
make[3]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/conf/cards'
Making install in pcm
make[3]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/conf/pcm'
make[4]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/conf/pcm'
make[4]: Nothing to be done for `install-exec-am'.
test -z "/usr/share/alsa/pcm" || mkdir -p -- "/usr/share/alsa/pcm"
 /usr/bin/install -c -m 644 'default.conf' '/usr/share/alsa/pcm/default.conf'
 /usr/bin/install -c -m 644 'front.conf' '/usr/share/alsa/pcm/front.conf'
 /usr/bin/install -c -m 644 'rear.conf' '/usr/share/alsa/pcm/rear.conf'
 /usr/bin/install -c -m 644 'center_lfe.conf' '/usr/share/alsa/pcm/center_lfe.conf'
 /usr/bin/install -c -m 644 'side.conf' '/usr/share/alsa/pcm/side.conf'
 /usr/bin/install -c -m 644 'surround40.conf' '/usr/share/alsa/pcm/surround40.conf'
 /usr/bin/install -c -m 644 'surround41.conf' '/usr/share/alsa/pcm/surround41.conf'
 /usr/bin/install -c -m 644 'surround50.conf' '/usr/share/alsa/pcm/surround50.conf'
 /usr/bin/install -c -m 644 'surround51.conf' '/usr/share/alsa/pcm/surround51.conf'
 /usr/bin/install -c -m 644 'surround71.conf' '/usr/share/alsa/pcm/surround71.conf'
 /usr/bin/install -c -m 644 'iec958.conf' '/usr/share/alsa/pcm/iec958.conf'
 /usr/bin/install -c -m 644 'modem.conf' '/usr/share/alsa/pcm/modem.conf'
 /usr/bin/install -c -m 644 'dmix.conf' '/usr/share/alsa/pcm/dmix.conf'
 /usr/bin/install -c -m 644 'dsnoop.conf' '/usr/share/alsa/pcm/dsnoop.conf'
 /usr/bin/install -c -m 644 'dpl.conf' '/usr/share/alsa/pcm/dpl.conf'
make[4]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/conf/pcm'
make[3]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/conf/pcm'
make[3]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/conf'
make[4]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/conf'
make[4]: Nothing to be done for `install-exec-am'.
test -z "/usr/share/alsa" || mkdir -p -- "/usr/share/alsa"
 /usr/bin/install -c -m 644 'alsa.conf' '/usr/share/alsa/alsa.conf'
 /usr/bin/install -c -m 644 'sndo-mixer.alisp' '/usr/share/alsa/sndo-mixer.alisp'
 /usr/bin/install -c -m 644 'smixer.conf' '/usr/share/alsa/smixer.conf'
make[4]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/conf'
make[3]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/conf'
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/conf'
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src'
make[3]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src'
test -z "/usr/lib" || mkdir -p -- "/usr/lib"
 /bin/bash ../libtool --mode=install /usr/bin/install -c  'libasound.la' '/usr/lib/libasound.la'
/usr/bin/install -c .libs/libasound.so.2.0.0 /usr/lib/libasound.so.2.0.0
(cd /usr/lib && { ln -s -f libasound.so.2.0.0 libasound.so.2 || { rm -f libasound.so.2 && ln -s libasound.so.2.0.0 libasound.so.2; }; })
(cd /usr/lib && { ln -s -f libasound.so.2.0.0 libasound.so || { rm -f libasound.so && ln -s libasound.so.2.0.0 libasound.so; }; })
/usr/bin/install -c .libs/libasound.lai /usr/lib/libasound.la
PATH="$PATH:/sbin" ldconfig -n /usr/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /usr/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,--rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src'
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src'
make[1]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src'
Making install in modules
make[1]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/modules'
Making install in mixer
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/modules/mixer'
Making install in simple
make[3]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/modules/mixer/simple'
make[4]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/modules/mixer/simple'
test -z "/usr/lib/alsa-lib/smixer" || mkdir -p -- "/usr/lib/alsa-lib/smixer"
 /bin/bash ../../../libtool --mode=install /usr/bin/install -c  'smixer-sbase.la' '/usr/lib/alsa-lib/smixer/smixer-sbase.la'
libtool: install: warning: relinking `smixer-sbase.la'
(cd /home/francesco/alsa/alsa-lib-1.0.15rc3/modules/mixer/simple; /bin/bash ../../../libtool  --tag=CC --mode=relink gcc -g -O2 -W -Wall -g -O2 -o smixer-sbase.la -rpath /usr/lib/alsa-lib/smixer -module -avoid-version sbase.lo ../../../src/libasound.la )
gcc -shared  .libs/sbase.o  -L/usr/lib -lasound  -Wl,-soname -Wl,smixer-sbase.so -o .libs/smixer-sbase.so
/usr/bin/install -c .libs/smixer-sbase.soT /usr/lib/alsa-lib/smixer/smixer-sbase.so
/usr/bin/install -c .libs/smixer-sbase.lai /usr/lib/alsa-lib/smixer/smixer-sbase.la
PATH="$PATH:/sbin" ldconfig -n /usr/lib/alsa-lib/smixer
----------------------------------------------------------------------
Libraries have been installed in:
   /usr/lib/alsa-lib/smixer

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,--rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /bin/bash ../../../libtool --mode=install /usr/bin/install -c  'smixer-ac97.la' '/usr/lib/alsa-lib/smixer/smixer-ac97.la'
libtool: install: warning: relinking `smixer-ac97.la'
(cd /home/francesco/alsa/alsa-lib-1.0.15rc3/modules/mixer/simple; /bin/bash ../../../libtool  --tag=CC --mode=relink gcc -g -O2 -W -Wall -g -O2 -o smixer-ac97.la -rpath /usr/lib/alsa-lib/smixer -module -avoid-version ac97.lo sbasedl.lo ../../../src/libasound.la )
gcc -shared  .libs/ac97.o .libs/sbasedl.o  -L/usr/lib -lasound  -Wl,-soname -Wl,smixer-ac97.so -o .libs/smixer-ac97.so
/usr/bin/install -c .libs/smixer-ac97.soT /usr/lib/alsa-lib/smixer/smixer-ac97.so
/usr/bin/install -c .libs/smixer-ac97.lai /usr/lib/alsa-lib/smixer/smixer-ac97.la
PATH="$PATH:/sbin" ldconfig -n /usr/lib/alsa-lib/smixer
----------------------------------------------------------------------
Libraries have been installed in:
   /usr/lib/alsa-lib/smixer

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,--rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /bin/bash ../../../libtool --mode=install /usr/bin/install -c  'smixer-hda.la' '/usr/lib/alsa-lib/smixer/smixer-hda.la'
libtool: install: warning: relinking `smixer-hda.la'
(cd /home/francesco/alsa/alsa-lib-1.0.15rc3/modules/mixer/simple; /bin/bash ../../../libtool  --tag=CC --mode=relink gcc -g -O2 -W -Wall -g -O2 -o smixer-hda.la -rpath /usr/lib/alsa-lib/smixer -module -avoid-version hda.lo sbasedl.lo ../../../src/libasound.la )
gcc -shared  .libs/hda.o .libs/sbasedl.o  -L/usr/lib -lasound  -Wl,-soname -Wl,smixer-hda.so -o .libs/smixer-hda.so
/usr/bin/install -c .libs/smixer-hda.soT /usr/lib/alsa-lib/smixer/smixer-hda.so
/usr/bin/install -c .libs/smixer-hda.lai /usr/lib/alsa-lib/smixer/smixer-hda.la
PATH="$PATH:/sbin" ldconfig -n /usr/lib/alsa-lib/smixer
----------------------------------------------------------------------
Libraries have been installed in:
   /usr/lib/alsa-lib/smixer

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,--rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[4]: Nothing to be done for `install-data-am'.
make[4]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/modules/mixer/simple'
make[3]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/modules/mixer/simple'
make[3]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/modules/mixer'
make[4]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/modules/mixer'
make[4]: Nothing to be done for `install-exec-am'.
make[4]: Nothing to be done for `install-data-am'.
make[4]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/modules/mixer'
make[3]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/modules/mixer'
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/modules/mixer'
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/modules'
make[3]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/modules'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/modules'
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/modules'
make[1]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/modules'
Making install in aserver
make[1]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/aserver'
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/aserver'
test -z "/usr/bin" || mkdir -p -- "/usr/bin"
  /bin/bash ../libtool --mode=install /usr/bin/install -c 'aserver' '/usr/bin/aserver'
/usr/bin/install -c .libs/aserver /usr/bin/aserver
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/aserver'
make[1]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/aserver'
Making install in alsalisp
make[1]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/alsalisp'
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/alsalisp'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/alsalisp'
make[1]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/alsalisp'
Making install in test
make[1]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/test'
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/test'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/test'
make[1]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/test'
Making install in utils
make[1]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/utils'
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/utils'
make[2]: Nothing to be done for `install-exec-am'.
test -z "/usr/share/aclocal" || mkdir -p -- "/usr/share/aclocal"
 /usr/bin/install -c -m 644 'alsa.m4' '/usr/share/aclocal/alsa.m4'
test -z "/usr/lib/pkgconfig" || mkdir -p -- "/usr/lib/pkgconfig"
 /usr/bin/install -c -m 644 'alsa.pc' '/usr/lib/pkgconfig/alsa.pc'
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/utils'
make[1]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/utils'
make[1]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3'
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3'
make[1]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3'
francesco@francesco-desktop:~/alsa/alsa-lib-1.0.15rc3$ 

E mi lasciano perplesso ancora quei "Nothing to do with..."

perchè poi, installando gli utils...

[frafer90]

POI

installo gli utils... ./configure.... tutto a posto mi pare... poi

Codice: Seleziona tutto

sudo make

...

Codice: Seleziona tutto

francesco@francesco-desktop:~/alsa/alsa-utils-1.0.15rc1$ sudo make
Making all in include
make[1]: Entering directory `/home/francesco/alsa/alsa-utils-1.0.15rc1/include'
make  all-am
make[2]: Entering directory `/home/francesco/alsa/alsa-utils-1.0.15rc1/include'
make[2]: Leaving directory `/home/francesco/alsa/alsa-utils-1.0.15rc1/include'
make[1]: Leaving directory `/home/francesco/alsa/alsa-utils-1.0.15rc1/include'
Making all in alsactl
make[1]: Entering directory `/home/francesco/alsa/alsa-utils-1.0.15rc1/alsactl'
if gcc -DHAVE_CONFIG_H -I. -I. -I../include     -g -O2 -MT alsactl.o -MD -MP -MF ".deps/alsactl.Tpo" -c -o alsactl.o alsactl.c; \
        then mv -f ".deps/alsactl.Tpo" ".deps/alsactl.Po"; else rm -f ".deps/alsactl.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I../include     -g -O2 -MT state.o -MD -MP -MF ".deps/state.Tpo" -c -o state.o state.c; \
        then mv -f ".deps/state.Tpo" ".deps/state.Po"; else rm -f ".deps/state.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I../include     -g -O2 -MT names.o -MD -MP -MF ".deps/names.Tpo" -c -o names.o names.c; \
        then mv -f ".deps/names.Tpo" ".deps/names.Po"; else rm -f ".deps/names.Tpo"; exit 1; fi
gcc  -g -O2   -o alsactl  alsactl.o state.o names.o  -lasound -lm -ldl -lpthread
make[1]: Leaving directory `/home/francesco/alsa/alsa-utils-1.0.15rc1/alsactl'
Making all in alsaconf
make[1]: Entering directory `/home/francesco/alsa/alsa-utils-1.0.15rc1/alsaconf'
Making all in po
make[2]: Entering directory `/home/francesco/alsa/alsa-utils-1.0.15rc1/alsaconf/po'
mv: impossibile fare stat di `t-ja.gmo': Nessun file o directory
make[2]: *** [ja.gmo] Error 1
make[2]: Leaving directory `/home/francesco/alsa/alsa-utils-1.0.15rc1/alsaconf/po'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/francesco/alsa/alsa-utils-1.0.15rc1/alsaconf'
make: *** [all-recursive] Error 1

[Guiodic]

fai solo make non sudo make.

[frafer90]

poi (sempre per gli utils)...

Codice: Seleziona tutto

sudo make install

e mi dice...

Codice: Seleziona tutto

francesco@francesco-desktop:~/alsa/alsa-utils-1.0.15rc1$ sudo make install
Making install in include
make[1]: Entering directory `/home/francesco/alsa/alsa-utils-1.0.15rc1/include'
make[2]: Entering directory `/home/francesco/alsa/alsa-utils-1.0.15rc1/include'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/francesco/alsa/alsa-utils-1.0.15rc1/include'
make[1]: Leaving directory `/home/francesco/alsa/alsa-utils-1.0.15rc1/include'
Making install in alsactl
make[1]: Entering directory `/home/francesco/alsa/alsa-utils-1.0.15rc1/alsactl'
make[2]: Entering directory `/home/francesco/alsa/alsa-utils-1.0.15rc1/alsactl'
test -z "/usr/sbin" || mkdir -p -- "/usr/sbin"
  /usr/bin/install -c 'alsactl' '/usr/sbin/alsactl'
test -z "/usr/share/man/man1" || mkdir -p -- "/usr/share/man/man1"
 /usr/bin/install -c -m 644 './alsactl.1' '/usr/share/man/man1/alsactl.1'
make[2]: Leaving directory `/home/francesco/alsa/alsa-utils-1.0.15rc1/alsactl'
make[1]: Leaving directory `/home/francesco/alsa/alsa-utils-1.0.15rc1/alsactl'
Making install in alsaconf
make[1]: Entering directory `/home/francesco/alsa/alsa-utils-1.0.15rc1/alsaconf'
Making install in po
make[2]: Entering directory `/home/francesco/alsa/alsa-utils-1.0.15rc1/alsaconf/po'
mv: impossibile fare stat di `t-ja.gmo': Nessun file o directory
make[2]: *** [ja.gmo] Error 1
make[2]: Leaving directory `/home/francesco/alsa/alsa-utils-1.0.15rc1/alsaconf/po'
make[1]: *** [install-recursive] Error 1
make[1]: Leaving directory `/home/francesco/alsa/alsa-utils-1.0.15rc1/alsaconf'
make: *** [install-recursive] Error 1
francesco@francesco-desktop:~/alsa/alsa-utils-1.0.15rc1$ 

INSOMMA...NON CAPISCO A COSA SIANO DOVUTI GLI ERRORI... se qualcuno di voi ci capisce lo prego di aiutarmi...
Grazie mille

Francesco

[frafer90]

provo a fare solo make...ma paolosan m aveva consigliato di fare sudo make

[frafer90]

facendo solo

Codice: Seleziona tutto

make

per la library

Codice: Seleziona tutto

francesco@francesco-desktop:~/alsa/alsa-lib-1.0.15rc3$ make
Making all in doc
make[1]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/doc'
Making all in pictures
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/doc/pictures'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/doc/pictures'
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/doc'
make[2]: Nothing to be done for `all-am'.
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/doc'
make[1]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/doc'
Making all in include
make[1]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/include'
make  all-recursive
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/include'
Making all in sound
make[3]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/include/sound'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/include/sound'
make[3]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/include'
make[3]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/include'
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/include'
make[1]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/include'
Making all in src
make[1]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src'
Making all in control
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/control'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/control'
Making all in mixer
make[2]: Entering directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/mixer'
if /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT simple_none.lo -MD -MP -MF ".deps/simple_none.Tpo" -c -o simple_none.lo simple_none.c; \
        then mv -f ".deps/simple_none.Tpo" ".deps/simple_none.Plo"; else rm -f ".deps/simple_none.Tpo"; exit 1; fi
rm: cannot remove `.libs/simple_none.o': Permission denied
rm: cannot remove `.libs/simple_none.o': Permission denied
 gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -MT simple_none.lo -MD -MP -MF .deps/simple_none.Tpo -c simple_none.c  -fPIC -DPIC -o .libs/simple_none.o
Assembler messages:
Fatal error: can't create .libs/simple_none.o: Permission denied
make[2]: *** [simple_none.lo] Error 1
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/mixer'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src'
make: *** [all-recursive] Error 1

PERCHéèèèèèèèèèèèèèèèè?? capitano tutte a me

[Guiodic]

comunque prova a compilare solo i driver, a me ha risolto (ovviamente poi devi riavviare)

[Panunz]

Assembler messages:
Fatal error: can't create .libs/simple_none.o: Permission denied
make[2]: *** [simple_none.lo] Error 1
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/mixer'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src'
make: ***

Ecco perche' devi usare

Codice: Seleziona tutto

sudo make

al posto di make.

Poi un altra cosa, quando fai il 

Codice: Seleziona tutto

sudo make

cerca di vedere solamente se vengono restituiti errori, nel tuo caso (Postato il 10 Ottobre, 2007, 22:03:47) ti veniva restituito

Codice: Seleziona tutto

 Nothing to be done for `all'.

ma te ne puoi fottere, o almeno cosi' ho fatto io. Il problema esiste solamente se viene restituito  :

Codice: Seleziona tutto

make[2]: *** [simple_none.lo] Error 1
make[2]: Leaving directory `/home/francesco/alsa/alsa-lib-1.0.15rc3/src/mixer'
make[1]: *** [all-recursive] Error 1

e cose di questo tipo.

Quindi ti inviterei a rieseguire la procedura, questa volta pu' attentamente , leggendo tutti i consigli che ti son stati dati.
Per quanto riguarda le versioni dei driver ,lib e utils scarica le ultime disponibili. Ovviamente se per driver e lib esiste la versione 13c e per utils solo (esempio) la 11a, non succede nulla, scaricale comunque . Vorra' dire che degli utils la versione piu' aggiornata ha quel numero (inferiore rispetto a driver e lib).
Ciao ed in bocca al lupo.

[frafer90]

panunz...
ho fatto cn il "sudo make" cm m hai detto e fino alle lib sembra tutto ok... ma ora...alla fine degli utils (dopo aver fatto "sudo make")

Codice: Seleziona tutto

gcc  -g -O2   -o alsactl  alsactl.o state.o names.o  -lasound -lm -ldl -lpthread
make[1]: Leaving directory `/home/francesco/alsa/alsa-utils-1.0.15rc1/alsactl'
Making all in alsaconf
make[1]: Entering directory `/home/francesco/alsa/alsa-utils-1.0.15rc1/alsaconf'
Making all in po
make[2]: Entering directory `/home/francesco/alsa/alsa-utils-1.0.15rc1/alsaconf/po'
mv: impossibile fare stat di `t-ja.gmo': Nessun file o directory
make[2]: *** [ja.gmo] Error 1
make[2]: Leaving directory `/home/francesco/alsa/alsa-utils-1.0.15rc1/alsaconf/po'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/francesco/alsa/alsa-utils-1.0.15rc1/alsaconf'
make: *** [all-recursive] Error 1

boh...helpppppppppp

[frafer90]

helpppppppppppppppppppppppppppppppppppppppppppp

[metalferro]

segui questi posts:
http://forum.ubuntu-it.org/index.php/to ... cseen.html
http://forum.ubuntu-it.org/viewtopic.ph ... 04#p303204
spero di esserti stato utlite.
fabio (b2b)

[frafer90]

ragazzi...vorrei capire il perchè degli errori che avvengono durante l'installazione di lib e utils più che altro...perché vorrei vedere se correggendoli e installando correttamente tutto si possa sistemare l'audio...ma continuo a non capire perchè anche usando i giusti driver non vada... il mio alsamixer aperto da terminale dice che ho 1 chip

Realtek ALC850 rev 0

e card

Intel ICH5

io non mi intendo ma se voi doveste trovare le giuste procedure...vi prego consigliatemi perchè non so più dove sbattere la testa e a furia di tentativi non ci capisco più nulla... se qualcuno di voi, certamente più esperto di me, guardasse sul sito della realtek e capisse cosa devo fare (io non ci capisco molto, o meglio, anche installando i giusti driver alsa del sito, non ci ricavo nulla) ne sarei felicissimoooo...sono straziato dall'assenza di audio... è tristissimo...

grazie

Francesco

[paolosan]

Eccomi qui dopo un periodo di ferie  :P , ho riletto il topic ma non capisco cosa non vada, non saprei proprio cosa dirti...  :-\

Hai visto i link sopra?

Codice: Seleziona tutto

segui questi posts:
http://forum.ubuntu-it.org/index.php/topic,53171.0/topicseen.html
http://forum.ubuntu-it.org/viewtopic.php?p=303204#p303204
spero di esserti stato utile.

(b2b)

[frafer90]

visti...ma sono rimandi ad altri link...e non ci capisco molto...boh...mi sa che aspetto per vedere se con la gutsy si sistema qualcosa...dite che è possibile?? con la gutsy può riconoscermelaa?...o dovrò cambiare scheda audio...