Pagina 2 di 4
Re: ATI + driver radeon + gutsy
Inviato: giovedì 11 ottobre 2007, 17:47
da ScdGigi
a me ancora non è chiara una cosa.. usando i driver proprietari si ottiene effettivamente un aumento della qualità/velocità di compiz? A me con i driver open funziona tutto..certo però se potesse essere più veloce qualche prova la farei..
Re: ATI + driver radeon + gutsy
Inviato: giovedì 11 ottobre 2007, 18:00
da Spinus
EDIT:
Farei un riassunto visto che ora mi funziona anche fglrx (versione kernel 2.6.22-14):
- x usare i driver radeon = disintallare xorg-driver-fglrx
- per usare fglrx = installare xorg-driver-fglrx, riconfigurare xorg.conf, riavviare; se si fa "modprobe fglrx" sembra dare problemi, perchè c'è ancora in funzione il modulo drm..riavviando il sistema fglrx si carica correttamente!
Re: ATI + driver radeon + gutsy
Inviato: giovedì 11 ottobre 2007, 23:56
da iBART
prova del 9.
installato kernel 22-14
disinstallato kernel 22-12
disinstallati driver ati ufficiali (e tutte le voci di riferimento a fglrx)
editato xorg.conf e messi driver vesa.
riavvio.
$ sudo apt-get install xorg-driver-fglrx
editato xorg.conf e messi driver fglrx
riavvio.
Codice: Seleziona tutto
ibart@amd64-linux:~$ fglrxinfo
Xlib: extension "XFree86-DRI" missing on display ":0.0".
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.4 (2.1 Mesa 7.0.1)
$ sudo modprobe fglrx
riavviato
installati driver restricted ubuntu
riavviato
Codice: Seleziona tutto
ibart@amd64-linux:~$ glxinfo | grep rendering
direct rendering: Yes
ibart@amd64-linux:~$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: Radeon X1600 Series
OpenGL version string: 2.0.6473 (8.37.6)
ma nonostante questo ...
tentativo fallito :'(
Re: ATI + driver radeon + gutsy
Inviato: venerdì 12 ottobre 2007, 7:20
da Pixel
Comincio a pensare che non leggete quello che si scrive
2) Installato il pacchetto xserver-xgl (che si autoconfigura)
Se non lo installi col piffero che hai gli effetti
Ciao
Re: ATI + driver radeon + gutsy
Inviato: venerdì 12 ottobre 2007, 7:57
da Skippi
Spinus ha scritto:
Per chi sta utilizzando il driver radeon e l'accelerazione 3D non funziona, do un consiglio: provate a rimuovere xorg-driver-fglrx. Ho letto su un forum inglese che poteva essere questa la causa, infatti ora sul mio sistema funziona perfettamente il 3D :P
P.S se avete altri problemi provate a rimuovere xserver-xgl...l'ho dovuto fare perché, altrimenti, X era paurosamente lento!
questa sera provo, questa notte sono passato a gutsy, e in effetti con glxgears faccio pietà... e supertux mi và a scatti!!!
ho una mobility 9600....
Re: ATI + driver radeon + gutsy
Inviato: venerdì 12 ottobre 2007, 16:34
da iBART
Pixel ha scritto:
Comincio a pensare che non leggete quello che si scrive
2) Installato il pacchetto xserver-xgl (che si autoconfigura)
Se non lo installi col piffero che hai gli effetti
Ciao
fatto ora dice Desktop effects could not be enabled
Re: ATI + driver radeon + gutsy
Inviato: venerdì 12 ottobre 2007, 16:44
da Pixel
hai riavviato?
Re: ATI + driver radeon + gutsy
Inviato: venerdì 12 ottobre 2007, 16:53
da iBART
zi zi e ora
Codice: Seleziona tutto
ibart@amd64-linux:~$ glxinfo | grep rendering
Xlib: extension "XFree86-DRI" missing on display ":1.0".
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
nonostante i driver accelerati, da restricted manager, risultino attivi

Re: ATI + driver radeon + gutsy
Inviato: venerdì 12 ottobre 2007, 17:32
da Pixel
Quel messaggio è normale con XGL.
Gli effetti funzionano o no?
Re: ATI + driver radeon + gutsy
Inviato: venerdì 12 ottobre 2007, 21:11
da Skippi
ho fatto un macello... ma alla fine ho disinstallato tutto xorg e dipendenze... reinstallato da zero... installato di nuovo gnome e tutto va alla perfezione!!! ho una ati mobility 9600 turbo!!!
oggi segno questo giorno nel calendario!!!!
Re: ATI + driver radeon + gutsy
Inviato: venerdì 12 ottobre 2007, 21:38
da SonOfFree
Allora fermi!!! Oggi ho installato la RC. Ho una Ati x700, fiducioso attivo i driver ati, riavvio ma mi dice che non trova bene la scheda video e devo usare i vesa. Se do
Codice: Seleziona tutto
sudo apt-get remove xorg-driver-fglrx
Lettura della lista dei pacchetti in corso... Fatto
Generazione dell'albero delle dipendenze in corso
Reading state information... Fatto
Il pacchetto xorg-driver-fglrx non è installato, quindi non è stato rimosso
0 aggiornati, 0 installati, 0 da rimuovere e 0 non aggiornati.
Quindi? COme faccio ad avere i radeon con aiglx???
Re: ATI + driver radeon + gutsy
Inviato: sabato 13 ottobre 2007, 0:55
da iBART
Quindi? COme faccio ad avere i radeon con aiglx???
^
non puoi ancora, i prossimi driver dovrebbero permetterlo.
Re: ATI + driver radeon + gutsy
Inviato: sabato 13 ottobre 2007, 0:55
da iBART
Pixel ha scritto:
Quel messaggio è normale con XGL.
Gli effetti funzionano o no?
dice Desktop effects could not be enabled
Re: ATI + driver radeon + gutsy
Inviato: sabato 13 ottobre 2007, 1:10
da iBART
Codice: Seleziona tutto
ibart@amd64-linux:~$ compiz
Checking for Xgl: present.
Checking for nVidia: not present.
Checking for Xgl: present.
Starting gtk-window-decorator
/usr/bin/compiz.real (core) - Fatal: GLX_EXT_texture_from_pixmap is missing
/usr/bin/compiz.real (core) - Error: Failed to manage screen: 0
/usr/bin/compiz.real (core) - Fatal: No manageable screens found on display :1.0
mia situazione
Re: ATI + driver radeon + gutsy
Inviato: sabato 13 ottobre 2007, 1:33
da Divilinux
Quindi? COme faccio ad avere i radeon con aiglx???
il modulo radeon e' gia' presente nel kernel..devi aprire /etc/X11/xorg.conf e sostituire i driver della sezione "Device" "Driver" con
radeon
Poi, bisogna scaricare anche il metapacchetto:
il supporto dei driver radeon va dalla 7000 alla x1050 compresa.. la x700 e' pienamente supportata.
Aiglx e' gia' attivo in Xorg7.2, quindi non c'e' da abilitare nulla.
Re: ATI + driver radeon + gutsy
Inviato: sabato 13 ottobre 2007, 1:35
da Pixel
@iBart: Mi arrendo :-\
Probabilmente c'è un qualche file che fa' a pugni con altro...
Prova a guardare il tuo xorg... ti allego il mio:
Codice: Seleziona tutto
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Device"
Identifier "Scheda video generica"
Driver "fglrx"
Busid "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "Acer AL1717"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Scheda video generica"
Monitor "Acer AL1717"
Defaultdepth 24
SubSection "Display"
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen "Default Screen"
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
Inputdevice "stylus" "SendCoreEvents"
Inputdevice "cursor" "SendCoreEvents"
Inputdevice "eraser" "SendCoreEvents"
EndSection
Section "Module"
Load "glx"
EndSection
Section "Extensions"
Option "Composite" "0"
EndSection
ciao
Re: ATI + driver radeon + gutsy
Inviato: sabato 13 ottobre 2007, 5:23
da 128BIT
Scusate io sono niubbio...
Dopo aver installato ubuntu,andando su sistema,amministrazione,schermi,scheda grafica.
Poi che cosa bisogna selezionare per avere le migliori prestazioni con ATI X800XT?
Re: ATI + driver radeon + gutsy
Inviato: sabato 13 ottobre 2007, 6:51
da iBART
Pixel ha scritto:
@iBart: Mi arrendo :-\
Probabilmente c'è un qualche file che fa' a pugni con altro...
Prova a guardare il tuo xorg... ti allego il mio:
Codice: Seleziona tutto
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Device"
Identifier "Scheda video generica"
Driver "fglrx"
Busid "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "Acer AL1717"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Scheda video generica"
Monitor "Acer AL1717"
Defaultdepth 24
SubSection "Display"
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen "Default Screen"
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
Inputdevice "stylus" "SendCoreEvents"
Inputdevice "cursor" "SendCoreEvents"
Inputdevice "eraser" "SendCoreEvents"
EndSection
Section "Module"
Load "glx"
EndSection
Section "Extensions"
Option "Composite" "0"
EndSection
ciao
Codice: Seleziona tutto
Section "InputDevice"
Identifier "iKeyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
EndSection
Section "InputDevice"
Identifier "iMouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "Buttons" "7"
Option "ButtonMapping" "1 2 3 6 7"
Option "Emulate3Buttons" "false"
EndSection
Section "Device"
Identifier "iSV"
Driver "fglrx"
Busid "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "iMonitor"
Displaysize 336 270
Option "DPMS" "true"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "iSV"
Monitor "iMonitor"
Defaultdepth 24
SubSection "Display"
Modes "1280x1024"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
Inputdevice "iKeyboard"
Inputdevice "iMouse"
EndSection
Section "ServerFlags"
Option "blank time" "0"
Option "standby time" "0"
Option "suspend time" "0"
Option "off time" "0"
EndSection
Section "Module"
Load "glx"
EndSection
Section "Extensions"
Option "Composite" "0"
EndSection
:_)
Re: ATI + driver radeon + gutsy
Inviato: sabato 13 ottobre 2007, 6:59
da iBART
-.-
ho dato, per sfizio, sudo modprobe fglrx
e mi si sono avviati gli effetti. ma non doveva caricarlo in auto ? >_>
Re: ATI + driver radeon + gutsy
Inviato: sabato 13 ottobre 2007, 7:04
da iBART
ricapitolando :
installato kernel 22-14
disinstallato kernel 22-12
disinstallati driver ati ufficiali (e tutte le voci di riferimento a fglrx)
editato xorg.conf e messi driver vesa.
riavvio.
aperto il restricted-magarer ed abilitata l'accelerazione 3d
sudo apt-get xserver-xgl
riavvio.
sudo modprobe fglrx
ciao