Forum Ubuntu-it

Ciao ragazzi,

Ho la suddetta webcam, l'ho collegata e si è accesa la lucina, ma se lancio camorama mi dice che non si può connettere al device /dev/video0

ho provato a dare un'occhiata anche a queste info http://www.de-side.com/blogs/index.php?blog=2&title=webcam_trust_wb_1200p_su_ubuntu_gutsy&more=1&c=1&tb=1&pb=1 anche se non si tratta proprio della mi webcam, ma il risultato è sempre lo stesso.

Se vi può servire:

lsusb

Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 002: ID 0c45:600d Microdia
Bus 001 Device 001: ID 0000:0000

Grazi per qualsiasi aiuto che mi saprete dare

una guida più dettagliata per webcam simili alla tua è http://wiki.ubuntu-it.org/Hardware/Webcam/DriverGspca ma funziona con la Trust WB-1200p , non so se anche con la tua

Saluti
Sparazza

Posta i risultati di questi comandi..."lsusb"...."dmesg"...e anche "tail -f /var/log/messages"

potresti dare un occhiata qui se non si carica automaticamente....c'è una lista di webcam supportate.

http://mxhaard.free.fr/spca5xx.html

o al mio post...

http://forum.ubuntu-it.org/viewtopic.php?t=152746

Mi hanno gentilmente aiutato :-) ed ora funziona tutto.

Ciao

ciao, mi intrufolo...ho provato a seguire il tuo topic però non cambia niente

Codice: Seleziona tutto

[quote]lui@lui-desktop:~$ lsusb
Bus 002 Device 002: ID 093a:2468 Pixart Imaging, Inc. Easy Snap Snake Eye WebCam
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 001: ID 0000:0000  
lui@lui-desktop:~$ dmesg
[    0.000000] Linux version 2.6.22-14-rt (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP PREEMPT RT Tue Feb 12 09:57:10 UTC 2008 (Unofficial)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
[    0.000000]  BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] 126MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f5100
[    0.000000] Entering add_active_range(0, 0, 261872) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   261872
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   261872
[    0.000000] On node 0 totalpages: 261872
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4040 pages, LIFO batch:0
[    0.000000]   Normal zone: 3080 pages used for memmap
[    0.000000]   Normal zone: 222200 pages, LIFO batch:31
[    0.000000]   HighMem zone: 444 pages used for memmap
[    0.000000]   HighMem zone: 32052 pages, LIFO batch:7
[    0.000000] DMI 2.4 present.
[    0.000000] ACPI: RSDP signature @ 0xC00F7580 checksum 0
[    0.000000] ACPI: RSDP 000F7580, 0024 (r2 NEC CI)
[    0.000000] ACPI: XSDT 3FEF30C0, 0054 (r1 PacBel PBDTNB00 42302E31 AWRD        0)
[    0.000000] ACPI: FACP 3FEF8E80, 00F4 (r3 PacBel PBDTNB00 42302E31 AWRD        0)
[    0.000000] ACPI: DSDT 3FEF3240, 5BD8 (r1 PacBel PBDTNB00     1000 MSFT  3000000)
[    0.000000] ACPI: FACS 3FEF0000, 0040
[    0.000000] ACPI: SLIC 3FEF9080, 0176 (r1 PacBel PBDTNB00 42302E31 AWRD        0)
[    0.000000] ACPI: SSDT 3FEF9240, 0206 (r1 PacBel PBDTNB00        1  LTP        1)
[    0.000000] ACPI: HPET 3FEF94C0, 0038 (r1 PacBel PBDTNB00 42302E31 AWRD       98)
[    0.000000] ACPI: MCFG 3FEF9540, 003C (r1 PacBel PBDTNB00 42302E31 AWRD        0)
[    0.000000] ACPI: APIC 3FEF8FC0, 007C (r1 PacBel PBDTNB00 42302E31 AWRD        0)
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:11 APIC version 16
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 15:11 APIC version 16
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:b0100000)
[    0.000000] Real-Time Preemption Support (C) 2004-2007 Ingo Molnar
[    0.000000] Built 1 zonelists.  Total pages: 258292
[    0.000000] Kernel command line: root=UUID=405d043b-9681-47e3-9d3e-a582ec0f8ab7 ro quiet splash rootflags=data=writeback
[    0.000000] mapped APIC to ffffd000 (fee00000)
[    0.000000] mapped IOAPIC to ffffc000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] WARNING: experimental RCU implementation.
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 2109.828 MHz processor.
[   12.360771] spurious 8259A interrupt: IRQ7.
[   12.362805] Console: colour VGA+ 80x25
[   12.363144] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   12.363511] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   12.388299] Memory: 1020476k/1047488k available (2056k kernel code, 26280k reserved, 969k data, 364k init, 129984k highmem)
[   12.388309] virtual kernel memory layout:
[   12.388310]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[   12.388311]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   12.388312]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   12.388313]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   12.388314]       .init : 0xc03fb000 - 0xc0456000   ( 364 kB)
[   12.388315]       .data : 0xc03023dc - 0xc03f4b44   ( 969 kB)
[   12.388317]       .text : 0xc0100000 - 0xc03023dc   (2056 kB)
[   12.388319] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   12.388542] hpet clockevent registered
[   12.448498] Calibrating delay using timer specific routine.. 4222.53 BogoMIPS (lpj=2111268)
[   12.448536] Security Framework v1.0.0 initialized
[   12.448542] SELinux:  Disabled at boot.
[   12.448559] Mount-cache hash table entries: 512
[   12.448686] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f
[   12.448695] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   12.448697] CPU: L2 Cache: 512K (64 bytes/line)
[   12.448699] CPU 0(2) -> Core 0
[   12.448701] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f
[   12.448711] Compat vDSO mapped to ffffe000.
[   12.448721] Checking 'hlt' instruction... OK.
[   12.452628] SMP alternatives: switching to UP code
[   12.452994] Early unpacking initramfs... done
[   12.730736] ACPI: Core revision 20070126
[   12.730806] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   12.735919] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01
[   12.735935] SMP alternatives: switching to SMP code
[   12.735994] Booting processor 1/1 eip 3000
[   12.746204] Initializing CPU#1
[   12.806344] Calibrating delay using timer specific routine.. 4219.32 BogoMIPS (lpj=2109664)
[   12.806351] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f
[   12.806357] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   12.806359] CPU: L2 Cache: 512K (64 bytes/line)
[   12.806362] CPU 1(2) -> Core 1
[   12.806363] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f
[   12.806426] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01
[   12.806439] Total of 2 processors activated (8441.86 BogoMIPS).
[   12.806673] ENABLING IO-APIC IRQs
[   12.806900] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   12.918676] Brought up 2 CPUs
[   12.918894] Booting paravirtualized kernel on bare hardware
[   12.918968] Time:  9:30:24  Date: 02/05/108
[   12.919000] NET: Registered protocol family 16
[   12.919101] EISA bus registered
[   12.919104] ACPI: bus type pci registered
[   12.951470] PCI: PCI BIOS revision 3.00 entry at 0xf1df0, last bus=4
[   12.951472] PCI: Using configuration type 1
[   12.951474] Setting up standard PCI resources
[   12.956899] ACPI: EC: Look up EC in DSDT
[   12.962292] ACPI: Interpreter enabled
[   12.962294] ACPI: (supports S0 S3 S4 S5)
[   12.962309] ACPI: Using IOAPIC for interrupt routing
[   12.971985] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   12.971994] PCI: Probing PCI hardware (bus 00)
[   12.972593] PCI: Transparent bridge - 0000:00:04.0
[   12.972838] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   12.973069] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[   13.013557] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15)
[   13.013735] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15)
[   13.013909] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   13.014102] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   13.014276] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   13.014449] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   13.014624] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   13.014798] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 *10 11 14 15)
[   13.014971] ACPI: PCI Interrupt Link [liGP] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   13.015156] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   13.015331] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 *7 9 10 11 14 15)
[   13.015505] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 *7 9 10 11 14 15)
[   13.015678] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
[   13.015851] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   13.016025] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
[   13.016203] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
[   13.016375] ACPI: PCI Interrupt Link [liDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   13.016549] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[   13.016721] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   13.016932] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[   13.017136] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[   13.017335] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[   13.017533] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[   13.017732] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[   13.017932] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[   13.018137] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[   13.018337] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0
[   13.018536] ACPI: PCI Interrupt Link [AIGP] (IRQs 22 23) *0, disabled.
[   13.018736] ACPI: PCI Interrupt Link [APCF] (IRQs 22 23) *0
[   13.018935] ACPI: PCI Interrupt Link [APCH] (IRQs 22 23) *0
[   13.019138] ACPI: PCI Interrupt Link [APMU] (IRQs 22 23) *0, disabled.
[   13.019338] ACPI: PCI Interrupt Link [AAZA] (IRQs 22 23) *0
[   13.019538] ACPI: PCI Interrupt Link [APCS] (IRQs 22 23) *0
[   13.019736] ACPI: PCI Interrupt Link [APCL] (IRQs 22 23) *0
[   13.019935] ACPI: PCI Interrupt Link [APCM] (IRQs 22 23) *0, disabled.
[   13.020139] ACPI: PCI Interrupt Link [APCZ] (IRQs 22 23) *0, disabled.
[   13.020338] ACPI: PCI Interrupt Link [APSI] (IRQs 20) *0
[   13.020540] ACPI: PCI Interrupt Link [APSJ] (IRQs 21) *0, disabled.
[   13.020657] Linux Plug and Play Support v0.97 (c) Adam Belay
[   13.020667] pnp: PnP ACPI init
[   13.020681] ACPI: bus type pnp registered
[   13.024655] pnp: PnP ACPI: found 12 devices
[   13.024657] ACPI: ACPI bus type pnp unregistered
[   13.024660] PnPBIOS: Disabled by ACPI PNP
[   13.024866] PCI: Using ACPI for IRQ routing
[   13.024873] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   13.080384] NET: Registered protocol family 8
[   13.080386] NET: Registered protocol family 20
[   13.080399] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
[   13.080403] hpet0: 3 32-bit timers, 25000000 Hz
[   13.081493] pnp: 00:01: ioport range 0x1000-0x107f has been reserved
[   13.081496] pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
[   13.081499] pnp: 00:01: ioport range 0x1400-0x147f has been reserved
[   13.081502] pnp: 00:01: ioport range 0x1480-0x14ff has been reserved
[   13.081504] pnp: 00:01: ioport range 0x1800-0x187f has been reserved
[   13.081507] pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
[   13.081526] pnp: 00:0a: iomem range 0xf0000000-0xf3ffffff could not be reserved
[   13.081533] pnp: 00:0b: iomem range 0xd0000-0xd3fff has been reserved
[   13.081536] pnp: 00:0b: iomem range 0xd5800-0xd7fff has been reserved
[   13.081539] pnp: 00:0b: iomem range 0xf0000-0xfbfff could not be reserved
[   13.081542] pnp: 00:0b: iomem range 0xfc000-0xfffff could not be reserved
[   13.111874] PCI: Bridge: 0000:00:04.0
[   13.111876]   IO window: c000-cfff
[   13.111880]   MEM window: fde00000-fdefffff
[   13.111883]   PREFETCH window: fdf00000-fdffffff
[   13.111886] PCI: Bridge: 0000:00:09.0
[   13.111888]   IO window: b000-bfff
[   13.111891]   MEM window: fa000000-fcffffff
[   13.111893]   PREFETCH window: e0000000-efffffff
[   13.111896] PCI: Bridge: 0000:00:0b.0
[   13.111898]   IO window: a000-afff
[   13.111901]   MEM window: fdd00000-fddfffff
[   13.111903]   PREFETCH window: fdc00000-fdcfffff
[   13.111905] PCI: Bridge: 0000:00:0c.0
[   13.111907]   IO window: 9000-9fff
[   13.111910]   MEM window: fdb00000-fdbfffff
[   13.111912]   PREFETCH window: fda00000-fdafffff
[   13.111923] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   13.111931] PCI: Setting latency timer of device 0000:00:09.0 to 64
[   13.111937] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   13.111942] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   13.111964] NET: Registered protocol family 2
[   13.114190] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   13.114323] TCP established hash table entries: 65536 (order: 9, 2883584 bytes)
[   13.116418] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
[   13.117915] TCP: Hash tables configured (established 65536 bind 65536)
[   13.117919] TCP reno registered
[   13.118271] checking if image is initramfs... it is
[   13.666306] Freeing initrd memory: 7074k freed
[   13.667035] audit: initializing netlink socket (disabled)
[   13.667043] audit(1204709424.090:1): initialized
[   13.667016] highmem bounce pool size: 64 pages
[   13.667173] VFS: Disk quotas dquot_6.5.1
[   13.667183] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   13.667243] io scheduler noop registered
[   13.667245] io scheduler anticipatory registered
[   13.667247] io scheduler deadline registered
[   13.667258] io scheduler cfq registered (default)
[   13.677828] Boot video device is 0000:02:00.0
[   13.677793] PCI: Setting latency timer of device 0000:00:09.0 to 64
[   13.677815] assign_interrupt_mode Found MSI capability
[   13.677819] Allocate Port Service[0000:00:09.0:pcie00]
[   13.677898] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   13.677918] assign_interrupt_mode Found MSI capability
[   13.677922] Allocate Port Service[0000:00:0b.0:pcie00]
[   13.677979] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   13.677999] assign_interrupt_mode Found MSI capability
[   13.678001] Allocate Port Service[0000:00:0c.0:pcie00]
[   13.678168] isapnp: Scanning for PnP cards...
[   14.033665] isapnp: No Plug & Play device found
[   14.065905] Real Time Clock Driver v1.12ac
[   14.066117] hpet_resources: 0xfefff000 is busy
[   14.066159] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   14.067140] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[   14.067153] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 16
[   14.067524] 0000:01:08.0: ttyS0 at I/O 0xc808 (irq = 16) is a 16450
[   14.067713] 0000:01:08.0: ttyS1 at I/O 0xc810 (irq = 16) is a 8250
[   14.068068] 0000:01:08.0: ttyS2 at I/O 0xc818 (irq = 16) is a 16450
[   14.068270] 0000:01:08.0: ttyS3 at I/O 0xc820 (irq = 16) is a 8250
[   14.068369] Couldn't register serial port 0000:01:08.0: -28
[   14.068833] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   14.068954] input: Macintosh mouse button emulation as /class/input/input0
[   14.069033] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   14.069460] serio: i8042 KBD port at 0x60,0x64 irq 1
[   14.069634] serio: i8042 AUX port at 0x60,0x64 irq 12
[   14.069754] mice: PS/2 mouse device common for all mice
[   14.069744] EISA: Probing bus 0 at eisa.0
[   14.069750] Cannot allocate resource for EISA slot 1
[   14.069768] EISA: Detected 0 cards.
[   14.069837] TCP cubic registered
[   14.069845] NET: Registered protocol family 1
[   14.069861] Using IPI No-Shortcut mode
[   14.070024]   Magic number: 0:785:524
[   14.070448] Freeing unused kernel memory: 364k freed
[   14.086681] input: AT Translated Set 2 keyboard as /class/input/input1
[   15.287058] AppArmor: AppArmor initialized<5>audit(1204709425.590:2):  type=1505 info="AppArmor initialized" pid=1240
[   15.293393] fuse init (API version 7.8)
[   15.298186] Failure registering capabilities with primary security module.
[   15.301795] ACPI: Fan [FAN] (on)
[   15.307510] ACPI: Thermal Zone [THRM] (40 C)
[   15.740830] usbcore: registered new interface driver usbfs
[   15.740855] usbcore: registered new interface driver hub
[   15.740880] usbcore: registered new device driver usb
[   15.742159] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
[   15.742171] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 17
[   15.742183] PCI: Setting latency timer of device 0000:00:02.1 to 64
[   15.742186] ehci_hcd 0000:00:02.1: EHCI Host Controller
[   15.742372] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[   15.742404] ehci_hcd 0000:00:02.1: debug port 1
[   15.742408] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[   15.742443] ehci_hcd 0000:00:02.1: irq 17, io mem 0xfe02e000
[   15.742451] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   15.742553] usb usb1: configuration #1 chosen from 1 choice
[   15.742576] hub 1-0:1.0: USB hub found
[   15.742605] hub 1-0:1.0: 8 ports detected
[   15.749723] SCSI subsystem initialized
[   15.755674] libata version 2.21 loaded.
[   15.770787] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
[   15.794999] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   15.844139] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[   15.844152] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 18
[   15.859727] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[   15.859742] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 19
[   15.859757] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   15.859760] ohci_hcd 0000:00:02.0: OHCI Host Controller
[   15.859804] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[   15.860355] ohci_hcd 0000:00:02.0: irq 19, io mem 0xfe02f000
[   15.870246] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   15.870260] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   15.912817] usb usb2: configuration #1 chosen from 1 choice
[   15.912951] hub 2-0:1.0: USB hub found
[   15.912962] hub 2-0:1.0: 8 ports detected
[   15.928039] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[fdeff000-fdeff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   16.013537] sata_nv 0000:00:08.0: version 3.4
[   16.013937] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[   16.013947] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20
[   16.013989] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   16.014088] scsi0 : sata_nv
[   16.014164] scsi1 : sata_nv
[   16.014229] ata1: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001d800 irq 20
[   16.014232] ata2: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001d808 irq 20
[   16.467105] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   16.508199] ata1.00: ATA-7: ST3250820AS, 3.AAD, max UDMA/133
[   16.508202] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   16.583103] ata1.00: configured for UDMA/133
[   16.885839] ata2: SATA link down (SStatus 0 SControl 300)
[   16.896155] scsi 0:0:0:0: Direct-Access     ATA      ST3250820AS      3.AA PQ: 0 ANSI: 5
[   16.896654] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[   16.896658] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 17
[   16.896664] PCI: Setting latency timer of device 0000:00:07.0 to 64
[   16.896684] forcedeth: using HIGHDMA
[   17.188796] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d80000f7634a]
[   17.408697] eth0: forcedeth.c: subsystem: 01631:e026 bound to 0000:00:07.0
[   17.409171] NFORCE-MCP61: IDE controller at PCI slot 0000:00:06.0
[   17.409191] NFORCE-MCP61: chipset revision 162
[   17.409193] NFORCE-MCP61: not 100% native mode: will probe irqs later
[   17.409200] NFORCE-MCP61: 0000:00:06.0 (rev a2) UDMA133 controller
[   17.409209]     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[   17.409221] Probing IDE interface ide0...
[   17.422142] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[   17.422155] sd 0:0:0:0: [sda] Write Protect is off
[   17.422158] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   17.422173] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   17.422220] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[   17.422229] sd 0:0:0:0: [sda] Write Protect is off
[   17.422231] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   17.422244] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   17.422249]  sda: sda1 sda2 sda3 < sda5 >
[   17.459391] sd 0:0:0:0: [sda] Attached SCSI disk
[   17.463240] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   17.691385] Attempting manual resume
[   17.691408] swsusp: Resume From Partition 8:5
[   17.691410] PM: Checking swsusp image.
[   17.691587] PM: Resume from disk failed.
[   17.724374] kjournald starting.  Commit interval 5 seconds
[   17.724251] EXT3-fs: mounted filesystem with writeback data mode.
[   25.669541] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[   25.670540] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
[   25.686546] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   25.727443] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   26.018943] input: PC Speaker as /class/input/input2
[   26.144721] Linux agpgart interface v0.102 (c) Dave Jones
[   26.176194] nvidia: module license 'NVIDIA' taints kernel.
[   26.360838] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[   26.360844] ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 19
[   26.360882] PCI: Setting latency timer of device 0000:00:05.0 to 64
[   26.412842] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[   26.449645] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
[   26.449651] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC8] -> GSI 16 (level, low) -> IRQ 18
[   26.449660] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   26.449795] NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-9639  Mon Apr 16 20:20:06 PDT 2007
[   26.668586] input: ImExPS/2 Generic Explorer Mouse as /class/input/input3
[   26.910579] lp: driver loaded but no devices found
[   26.959545] Linux video capture interface: v2.00
[   26.976442] usbcore: registered new interface driver gspca
[   26.976449] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-rt/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered
[   27.022997] Adding 3028212k swap on /dev/sda5.  Priority:-1 extents:1 across:3028212k
[   27.029184] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[   27.029556] EXT3 FS on sda2, internal journal
[   29.301854] input: Power Button (FF) as /class/input/input4
[   29.301877] ACPI: Power Button (FF) [PWRF]
[   29.301921] input: Power Button (CM) as /class/input/input5
[   29.301937] ACPI: Power Button (CM) [PWRB]
[   29.345712] No dock devices found.
[   29.441226] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ processors (version 2.00.00)
[   29.441142] powernow-k8:    0 : fid 0xd (2100 MHz), vid 0xa
[   29.441147] powernow-k8:    1 : fid 0xc (2000 MHz), vid 0xb
[   29.441149] powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xd
[   29.441152] powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
[   30.189855] ppdev: user-space parallel port driver
[   30.379596] audit(1204705841.304:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4970 profile="/usr/sbin/cupsd"
[   30.495934] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[   30.495940] apm: disabled - APM is not SMP safe.
[   30.691701] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   30.775529] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   30.788495] NFSD: starting 90-second grace period
[   31.650638] Failure registering capabilities with primary security module.
[   31.859742] Clocksource tsc unstable (delta = -79001165 ns)
[   33.778959] NET: Registered protocol family 17
[   59.684637] usb 2-5: new full speed USB device using ohci_hcd and address 2
[   59.774354] usb 2-5: configuration #1 chosen from 1 choice
[   59.775640] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-rt/media/gspcav1/gspca_core.c: USB SPCA5XX camera found. (PAC207)
lui@lui-desktop:~$ tail -f /var/log/messages
Mar  5 09:30:42 lui-desktop dhcdbd: Started up.
Mar  5 09:30:42 lui-desktop kernel: [   31.859742] Clocksource tsc unstable (delta = -79001165 ns)
Mar  5 09:30:44 lui-desktop dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.reason
Mar  5 09:30:46 lui-desktop kernel: [   33.778959] NET: Registered protocol family 17
Mar  5 09:30:48 lui-desktop dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.host_name
Mar  5 09:30:48 lui-desktop dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_domain
Mar  5 09:30:48 lui-desktop dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_servers
Mar  5 09:31:31 lui-desktop kernel: [   59.684637] usb 2-5: new full speed USB device using ohci_hcd and address 2
Mar  5 09:31:32 lui-desktop kernel: [   59.774354] usb 2-5: configuration #1 chosen from 1 choice
Mar  5 09:31:32 lui-desktop kernel: [   59.775640] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-rt/media/gspcav1/gspca_core.c: USB SPCA5XX camera found. (PAC207)
[/quote]

Questo è quello che accade a me quado scollego e ricollego la cam con il comando
tail -f /var/log/messages......

giampiero@usb:~$ tail -f /var/log/messages
Mar 5 10:41:32 usb kernel: [ 3760.820000] usb 1-2: new full speed USB device using uhci_hcd and address 2
Mar 5 10:41:32 usb kernel: [ 3760.980000] usb 1-2: configuration #1 chosen from 1 choice
Mar 5 10:41:33 usb kernel: [ 3761.828000] /home/giampiero/gspcav1-20071224/gspca_core.c: USB GSPCA camera found. SONIX JPEG (sn9c1xx)
Mar 5 10:41:33 usb kernel: [ 3761.828000] /home/giampiero/gspcav1-20071224/gspca_core.c: [spca5xx_probe:4275] Camera type JPEG
Mar 5 10:41:33 usb kernel: [ 3761.832000] /home/giampiero/gspcav1-20071224/gspca_core.c: [spca5xx_getcapability:1249] maxw 640 maxh 480 minw 160 minh 120
Mar 5 10:41:33 usb kernel: [ 3761.832000] usbcore: registered new interface driver gspca
Mar 5 10:41:33 usb kernel: [ 3761.832000] /home/giampiero/gspcav1-20071224/gspca_core.c: gspca driver 01.00.20 registered
Mar 5 10:41:33 usb kernel: [ 3761.844000] sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.44
Mar 5 10:41:33 usb kernel: [ 3761.844000] usbcore: registered new interface driver sn9c102
Mar 5 10:41:33 usb kernel: [ 3762.112000] usbcore: registered new interface driver snd-usb-audio
[glow=red,2,300]Mar 5 10:50:03 usb kernel: [ 4271.628000] usb 1-2: USB disconnect, address 2[/glow]
Mar 5 10:50:17 usb kernel: [ 4285.468000] usb 2-1: new full speed USB device using uhci_hcd and address 2
Mar 5 10:50:17 usb kernel: [ 4285.832000] usb 2-1: configuration #1 chosen from 1 choice
Mar 5 10:50:17 usb kernel: [ 4285.836000] /home/giampiero/gspcav1-20071224/gspca_core.c: USB GSPCA camera found. SONIX JPEG (sn9c1xx)
Mar 5 10:50:17 usb kernel: [ 4285.836000] /home/giampiero/gspcav1-20071224/gspca_core.c: [spca5xx_probe:4275] Camera type JPEG
Mar 5 10:50:17 usb kernel: [ 4285.840000] /home/giampiero/gspcav1-20071224/gspca_core.c: [spca5xx_getcapability:1249] maxw 640 maxh 480 minw 160 minh 120

Ho sottolineato il momento della sconnessione...

Hai verificato se ti si crea il file video0? su /dev/video0 o video1 o ... hai percaso qualche altra periferica di aquisizione video?

Hai verificato di far parte del gruppo VIDEO?

Forse sbaglio ma non mi sembra che tu stia utilizzando i driver aggiornati gspca. Si scaricano da qui....
http://mxhaard.free.fr/download.html

Dovrebbe essere...
http://mxhaard.free.fr/spca50x/Download ... 224.tar.gz

una volta scaricato vai sopra col mause,tasto destro sopra al file e fai "estrai qui".

Poi apri il terminale e fai...
sudo apt-get install build-essential (ti scarica gli eventuali componenti per creare il driver..)
sudo modprobe -r gspca (ti toglie l'eventuale driver vecchio)

Poi fai...
cd Scrivania oppure cd Desktop ( a seconda se le cartelle sono in italiano o in inglese e se la cartella scompattata si trova lì..questo lo sai solo tu. )

cd "Nome cartella scompattata" ( dovrebbe essere "gspcav1-20071224" ).....insomma devi portarti dentro la cartella che si è creata precedentemente con il comando "estrai qui")

Poi fai..

sudo ./gspca_build
sudo modprobe gspca

riavvia ricollega la web e poi prova a verificare se si crea il file video0 con
ls /dev/vi*

Se risulta video0 o video1 o etc..a seconda di quante periferiche "video" hai prova a far partire un programma tipo camorama....

Se non và,anche se sembra scemo...riprova a collegarla anche dopo aver riavviato il pc.....

Se non và ancora e solo se il file video0 è presente controlla se la tua utenza ha i "diritti" per gestire la periferica...
Devi fare parte del gruppo "video"

Per controllare fai da terminale
id

Dovrebbe uscire una cosa tipo..
giampiero@usb:~$ id
uid=1001(giampiero) gid=1001(giampiero) gruppi=4(adm),20(dialout),21(fax),24(cdrom),25(floppy),
26(tape),29(audio),30(dip),44([glow=red,2,300]video[/glow]),46(plugdev),100(users),104(scanner),106(fuse),
110(admin),1001(giampiero)
giampiero@usb:~$

Deve essere presente il gruppo "VIDEO"
Ciao!! (b2b)

poppillo ma tu hai risolto?

sono andato nel portatile in questione, quello con il kernel generico

Codice: Seleziona tutto

zio@ubuntu:~$ lsusb
Bus 002 Device 002: ID 093a:2468 Pixart Imaging, Inc. Easy Snap Snake Eye WebCam
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 002: ID 0baf:0121 U.S. Robotics 
Bus 001 Device 001: ID 0000:0000

Codice: Seleziona tutto

zio@ubuntu:~$ dmesg
[    0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[    0.000000]  BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000cc000 - 00000000000d0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001eef0000 (usable)
[    0.000000]  BIOS-e820: 000000001eef0000 - 000000001eeff000 (ACPI data)
[    0.000000]  BIOS-e820: 000000001eeff000 - 000000001ef00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001ef00000 - 000000001f000000 (usable)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 496MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 126976) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   126976
[    0.000000]   HighMem    126976 ->   126976
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   126976
[    0.000000] On node 0 totalpages: 126976
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 960 pages used for memmap
[    0.000000]   Normal zone: 121920 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP signature @ 0xC00F7090 checksum 0
[    0.000000] ACPI: RSDP 000F7090, 0014 (r0 PTLTD )
[    0.000000] ACPI: RSDT 1EEFAE24, 0028 (r1 PTLTD    RSDT    6040000  LTP        0)
[    0.000000] ACPI: FACP 1EEFEF8C, 0074 (r1 SiS    650       6040000 PTL     F4240)
[    0.000000] ACPI: DSDT 1EEFAE4C, 4140 (r1 PTLTD      BY25  6040000 MSFT  100000E)
[    0.000000] ACPI: FACS 1EEFFFC0, 0040
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 1f000000:e0f80000)
[    0.000000] Built 1 zonelists.  Total pages: 125984
[    0.000000] Kernel command line: root=UUID=c548b2f6-9a2c-452f-8a28-f463e9c41505 ro quiet splash
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[    0.000000] mapped APIC to ffffd000 (013ec000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    0.000000] Detected 1693.174 MHz processor.
[   20.443024] Console: colour VGA+ 80x25
[   20.443550] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[   20.444031] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[   20.461604] Memory: 491912k/507904k available (2015k kernel code, 15300k reserved, 915k data, 364k init, 0k highmem)
[   20.461621] virtual kernel memory layout:
[   20.461622]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[   20.461624]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   20.461626]     vmalloc : 0xdf800000 - 0xff7fe000   ( 511 MB)
[   20.461628]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[   20.461630]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
[   20.461631]       .data : 0xc02f7e86 - 0xc03dce84   ( 915 kB)
[   20.461633]       .text : 0xc0100000 - 0xc02f7e86   (2015 kB)
[   20.461638] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   20.461698] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[   20.541627] Calibrating delay using timer specific routine.. 3389.77 BogoMIPS (lpj=6779559)
[   20.541666] Security Framework v1.0.0 initialized
[   20.541678] SELinux:  Disabled at boot.
[   20.541698] Mount-cache hash table entries: 512
[   20.541917] CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00000400 00000000 00000000
[   20.541937] CPU: Trace cache: 12K uops, L1 D cache: 8K
[   20.541942] CPU: L2 cache: 512K
[   20.541946] CPU: Hyper-Threading is disabled
[   20.541950] CPU: After all inits, caps: bfebf9ff 00000000 00000000 0000b080 00000400 00000000 00000000
[   20.541967] Compat vDSO mapped to ffffe000.
[   20.541988] Checking 'hlt' instruction... OK.
[   20.557781] SMP alternatives: switching to UP code
[   20.558075] Freeing SMP alternatives: 11k freed
[   20.558531] Early unpacking initramfs... done
[   21.025997] ACPI: Core revision 20070126
[   21.026090] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   21.028308] ACPI: setting ELCR to 0200 (from 0420)
[   21.444587] CPU0: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 1.70GHz stepping 07
[   21.444599] SMP motherboard not detected.
[   21.444603] Local APIC not detected. Using dummy APIC emulation.
[   21.444665] Brought up 1 CPUs
[   21.444876] Booting paravirtualized kernel on bare hardware
[   21.444975] Time: 10:58:50  Date: 02/05/108
[   21.445015] NET: Registered protocol family 16
[   21.445172] EISA bus registered
[   21.445192] ACPI: bus type pci registered
[   21.464776] PCI: PCI BIOS revision 2.10 entry at 0xfd98e, last bus=1
[   21.464779] PCI: Using configuration type 1
[   21.464782] Setting up standard PCI resources
[   21.475790] ACPI: EC: Look up EC in DSDT
[   21.478831] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[   21.480695] ACPI: Interpreter enabled
[   21.480702] ACPI: (supports S0 S3 S4 S5)
[   21.480727] ACPI: Using PIC for interrupt routing
[   21.491854] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[   21.491931] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   21.491948] PCI: Probing PCI hardware (bus 00)
[   21.492227] Enabling SiS 96x SMBus.
[   21.493350] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   21.493449] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[   21.503989] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11)
[   21.504119] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11)
[   21.504242] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11)
[   21.504367] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11) *0, disabled.
[   21.504579] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *10 11)
[   21.504705] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 10 11)
[   21.504829] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11) *0, disabled.
[   21.504953] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *10 11)
[   21.505102] Linux Plug and Play Support v0.97 (c) Adam Belay
[   21.505122] pnp: PnP ACPI init
[   21.505140] ACPI: bus type pnp registered
[   21.512782] pnp: PnP ACPI: found 11 devices
[   21.512786] ACPI: ACPI bus type pnp unregistered
[   21.512794] PnPBIOS: Disabled by ACPI PNP
[   21.512896] PCI: Using ACPI for IRQ routing
[   21.512901] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   21.516731] NET: Registered protocol family 8
[   21.516735] NET: Registered protocol family 20
[   21.516863] pnp: 00:04: ioport range 0x8000-0x8001 has been reserved
[   21.516869] pnp: 00:04: ioport range 0x8000-0x8067 could not be reserved
[   21.516874] pnp: 00:04: ioport range 0xfe00-0xfe00 has been reserved
[   21.516879] pnp: 00:04: iomem range 0xfff80000-0xffffffff could not be reserved
[   21.520389] Time: tsc clocksource has been installed.
[   21.547413] PCI: Bridge: 0000:00:01.0
[   21.547419]   IO window: a000-afff
[   21.547427]   MEM window: ec100000-ec1fffff
[   21.547435]   PREFETCH window: f0000000-f7ffffff
[   21.547443] PCI: Bus 2, cardbus bridge: 0000:00:09.0
[   21.547447]   IO window: 00001000-000010ff
[   21.547454]   IO window: 00001400-000014ff
[   21.547461]   PREFETCH window: 20000000-23ffffff
[   21.547468]   MEM window: 24000000-27ffffff
[   21.547474] PCI: Bus 6, cardbus bridge: 0000:00:09.1
[   21.547478]   IO window: 00001800-000018ff
[   21.547484]   IO window: 00001c00-00001cff
[   21.547491]   PREFETCH window: 28000000-2bffffff
[   21.547498]   MEM window: 2c000000-2fffffff
[   21.547788] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[   21.547794] PCI: setting IRQ 10 as level-triggered
[   21.547798] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
[   21.547809] PCI: Setting latency timer of device 0000:00:09.0 to 64
[   21.548006] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[   21.548010] ACPI: PCI Interrupt 0000:00:09.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[   21.548020] PCI: Setting latency timer of device 0000:00:09.1 to 64
[   21.548042] NET: Registered protocol family 2
[   21.584391] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[   21.584466] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[   21.584659] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[   21.584794] TCP: Hash tables configured (established 16384 bind 16384)
[   21.584799] TCP reno registered
[   21.596528] checking if image is initramfs... it is
[   22.047755] Switched to high resolution mode on CPU 0
[   22.524337] Freeing initrd memory: 7055k freed
[   22.524889] audit: initializing netlink socket (disabled)
[   22.524915] audit(1204714730.648:1): initialized
[   22.528434] VFS: Disk quotas dquot_6.5.1
[   22.528529] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   22.528698] io scheduler noop registered
[   22.528702] io scheduler anticipatory registered
[   22.528705] io scheduler deadline registered
[   22.528731] io scheduler cfq registered (default)
[   22.528788] Boot video device is 0000:01:00.0
[   22.529048] isapnp: Scanning for PnP cards...
[   22.882856] isapnp: No Plug & Play device found
[   22.928807] Real Time Clock Driver v1.12ac
[   22.928968] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   22.929093] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   22.930431] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   22.931205] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5
[   22.931212] PCI: setting IRQ 5 as level-triggered
[   22.931217] ACPI: PCI Interrupt 0000:00:02.6[C] -> Link [LNKF] -> GSI 5 (level, low) -> IRQ 5
[   22.931229] ACPI: PCI interrupt for device 0000:00:02.6 disabled
[   22.932214] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   22.932597] input: Macintosh mouse button emulation as /class/input/input0
[   22.932745] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   22.935999] i8042.c: Detected active multiplexing controller, rev 1.1.
[   22.938626] serio: i8042 KBD port at 0x60,0x64 irq 1
[   22.938635] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   22.938640] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   22.938644] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   22.938648] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   22.938970] mice: PS/2 mouse device common for all mice
[   22.939277] EISA: Probing bus 0 at eisa.0
[   22.939291] Cannot allocate resource for EISA slot 1
[   22.939319] Cannot allocate resource for EISA slot 8
[   22.939322] EISA: Detected 0 cards.
[   22.939658] TCP cubic registered
[   22.939685] NET: Registered protocol family 1
[   22.939722] Using IPI No-Shortcut mode
[   22.940050]   Magic number: 0:856:981
[   22.940083]   hash matches device ttyc8
[   22.941070] Freeing unused kernel memory: 364k freed
[   22.970625] input: AT Translated Set 2 keyboard as /class/input/input1
[   24.261618] AppArmor: AppArmor initialized<5>audit(1204714732.148:2):  type=1505 info="AppArmor initialized" pid=1178
[   24.275624] fuse init (API version 7.8)
[   24.283639] Failure registering capabilities with primary security module.
[   24.307743] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   24.307755] ACPI: Processor [CPU0] (supports 8 throttling states)
[   25.229730] usbcore: registered new interface driver usbfs
[   25.229789] usbcore: registered new interface driver hub
[   25.229828] usbcore: registered new device driver usb
[   25.231246] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   25.231650] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
[   25.231656] ACPI: PCI Interrupt 0000:00:02.2[D] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
[   25.231678] ohci_hcd 0000:00:02.2: OHCI Host Controller
[   25.232005] ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[   25.232030] ohci_hcd 0000:00:02.2: irq 10, io mem 0xec000000
[   25.279391] SCSI subsystem initialized
[   25.288174] libata version 2.21 loaded.
[   25.304321] usb usb1: configuration #1 chosen from 1 choice
[   25.304373] hub 1-0:1.0: USB hub found
[   25.304393] hub 1-0:1.0: 3 ports detected
[   25.400759] 8139too Fast Ethernet driver 0.9.28
[   25.407675] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
[   25.407682] ACPI: PCI Interrupt 0000:00:02.3[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
[   25.407708] ohci_hcd 0000:00:02.3: OHCI Host Controller
[   25.407750] ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2
[   25.407773] ohci_hcd 0000:00:02.3: irq 10, io mem 0xec001000
[   25.465294] usb usb2: configuration #1 chosen from 1 choice
[   25.465350] hub 2-0:1.0: USB hub found
[   25.465369] hub 2-0:1.0: 3 ports detected
[   25.567608] pata_sis 0000:00:02.5: version 0.5.1
[   25.567865] scsi0 : pata_sis
[   25.567952] scsi1 : pata_sis
[   25.568124] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00019480 irq 14
[   25.568129] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00019488 irq 15
[   25.632193] Floppy drive(s): fd0 is 1.44M
[   25.655159] FDC 0 is a post-1991 82077
[   25.710773] usb 1-3: new full speed USB device using ohci_hcd and address 2
[   25.731232] ata1.00: ATA-5: IC25N020ATCS04-0, CA2OA71A, max UDMA/100
[   25.731240] ata1.00: 39070080 sectors, multi 16: LBA 
[   25.731251] ata1.00: limited to UDMA/33 due to 40-wire cable
[   25.747160] ata1.00: configured for UDMA/33
[    4.892000] Marking TSC unstable due to: possible TSC halt in C2.
[    4.908000] Time: acpi_pm clocksource has been installed.
[    5.056000] usb 1-3: configuration #1 chosen from 1 choice
[    5.216000] ata2.00: ATAPI: TOSHIBA DVD-ROM SD-R2212, 1016, max UDMA/33
[    5.364000] usb 2-2: new full speed USB device using ohci_hcd and address 2
[    5.404000] ata2.00: configured for UDMA/33
[    5.404000] scsi 0:0:0:0: Direct-Access     ATA      IC25N020ATCS04-0 CA2O PQ: 0 ANSI: 5
[    5.408000] scsi 1:0:0:0: CD-ROM            TOSHIBA  DVD-ROM SD-R2212 1016 PQ: 0 ANSI: 5
[    5.416000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
[    5.416000] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
[    5.468000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5]  MMIO=[ec002000-ec0027ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
[    5.476000] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[    5.476000] eth0: RealTek RTL8139 at 0xdf83a800, 00:02:3f:b2:5a:fa, IRQ 10
[    5.476000] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[    5.480000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    5.508000] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors (20004 MB)
[    5.508000] sd 0:0:0:0: [sda] Write Protect is off
[    5.508000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.508000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.508000] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors (20004 MB)
[    5.508000] sd 0:0:0:0: [sda] Write Protect is off
[    5.508000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.508000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.508000]  sda: sda1 sda2 sda3 < sda5 >
[    5.548000] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.552000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.552000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    5.576000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    5.576000] Uniform CD-ROM driver Revision: 3.20
[    5.576000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    5.612000] usb 2-2: configuration #1 chosen from 1 choice
[    5.916000] Attempting manual resume
[    5.916000] swsusp: Resume From Partition 8:5
[    5.916000] PM: Checking swsusp image.
[    5.916000] PM: Resume from disk failed.
[    5.972000] kjournald starting.  Commit interval 5 seconds
[    5.976000] EXT3-fs: mounted filesystem with ordered data mode.
[    6.748000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023f2b1c000fa0]
[   19.412000] eth0: link down
[   21.288000] NET: Registered protocol family 17
[   21.676000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   21.680000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   22.044000] Linux agpgart interface v0.102 (c) Dave Jones
[   22.116000] agpgart: Detected SiS chipset - id:1616
[   22.124000] agpgart: AGP aperture is 64M @ 0xe8000000
[   22.200000] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8080
[   22.368000] Yenta: CardBus bridge found at 0000:00:09.0 [1025:001a]
[   22.368000] Yenta: Using CSCINT to route CSC interrupts to PCI
[   22.368000] Yenta: Routing CardBus interrupts to PCI
[   22.368000] Yenta TI: socket 0000:00:09.0, mfunc 0x019c1b22, devctl 0x44
[   22.600000] Yenta: ISA IRQ mask 0x0898, PCI irq 10
[   22.600000] Socket status: 30000006
[   22.600000] Yenta: CardBus bridge found at 0000:00:09.1 [1025:001a]
[   22.600000] Yenta: Using CSCINT to route CSC interrupts to PCI
[   22.600000] Yenta: Routing CardBus interrupts to PCI
[   22.600000] Yenta TI: socket 0000:00:09.1, mfunc 0x019c1b22, devctl 0x44
[   22.832000] Yenta: ISA IRQ mask 0x0818, PCI irq 10
[   22.832000] Socket status: 30000006
[   23.560000] ieee80211_crypt: registered algorithm 'NULL'
[   23.592000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   23.592000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   23.680000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[   23.780000] Linux video capture interface: v2.00
[   23.992000] /usr/src/modules/gspca/gspca_core.c: USB GSPCA camera found. (PAC207)
[   23.992000] /usr/src/modules/gspca/gspca_core.c: [spca5xx_probe:4041] Camera type GBRG 
[   24.004000] /usr/src/modules/gspca/gspca_core.c: [spca5xx_getcapability:1198] maxw 352 maxh 288 minw 160 minh 120
[   24.004000] usbcore: registered new interface driver gspca
[   24.004000] /usr/src/modules/gspca/gspca_core.c: gspca driver 01.00.16 registered
[   24.308000] Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9248b1, caps: 0x904713/0x4000
[   24.320000] ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKF] -> GSI 5 (level, low) -> IRQ 5
[   24.348000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[   24.352000] parport_pc 00:0a: reported by Plug and Play ACPI
[   24.352000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   24.356000] input: PC Speaker as /class/input/input4
[   24.404000] usb 1-3: reset full speed USB device using ohci_hcd and address 2
[   24.452000] cs: IO port probe 0x100-0x3af: excluding 0x200-0x20f
[   24.452000] cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f 0x4d0-0x4d7
[   24.456000] cs: IO port probe 0x820-0x8ff: clean.
[   24.456000] cs: IO port probe 0xc00-0xcf7: clean.
[   24.456000] cs: IO port probe 0xa00-0xaff: clean.
[   24.456000] cs: IO port probe 0x100-0x3af: excluding 0x200-0x20f
[   24.460000] cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f 0x4d0-0x4d7
[   24.460000] cs: IO port probe 0x820-0x8ff: clean.
[   24.460000] cs: IO port probe 0xc00-0xcf7: clean.
[   24.464000] cs: IO port probe 0xa00-0xaff: clean.
[   24.912000] zd1211rw 1-3:1.0: firmware version 4725
[   24.976000] zd1211rw 1-3:1.0: zd1211b chip 0baf:0121 v4810 full 00-14-c1 AL2230_RF pa0 g--NS
[   24.984000] zd1211rw 1-3:1.0: eth1
[   24.984000] usbcore: registered new interface driver zd1211rw
[   25.148000] intel8x0_measure_ac97_clock: measured 55345 usecs
[   25.148000] intel8x0: clocking to 48000
[   26.128000] loop: module loaded
[   26.172000] lp0: using parport0 (interrupt-driven).
[   26.328000] Adding 465844k swap on /dev/sda5.  Priority:-1 extents:1 across:465844k
[   26.816000] EXT3 FS on sda2, internal journal
[   30.668000] ACPI: Battery Slot [BAT1] (battery present)
[   30.748000] input: Power Button (FF) as /class/input/input5
[   30.756000] ACPI: Power Button (FF) [PWRF]
[   30.808000] input: Lid Switch as /class/input/input6
[   30.816000] ACPI: Lid Switch [LID]
[   30.872000] input: Power Button (CM) as /class/input/input7
[   30.872000] ACPI: Power Button (CM) [PWRB]
[   30.908000] ACPI: AC Adapter [ACAD] (on-line)
[   30.932000] No dock devices found.
[   33.268000] ppdev: user-space parallel port driver
[   33.972000] audit(1204711163.887:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4715 profile="/usr/sbin/cupsd"
[   34.072000] apm: BIOS not found.
[   34.468000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   34.868000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   34.884000] NFSD: starting 90-second grace period
[   36.540000] Failure registering capabilities with primary security module.
[   36.948000] Bluetooth: Core ver 2.11
[   36.948000] NET: Registered protocol family 31
[   36.948000] Bluetooth: HCI device and connection manager initialized
[   36.948000] Bluetooth: HCI socket layer initialized
[   37.000000] Bluetooth: L2CAP ver 2.8
[   37.000000] Bluetooth: L2CAP socket layer initialized
[   37.012000] Bluetooth: RFCOMM socket layer initialized
[   37.012000] Bluetooth: RFCOMM TTY layer initialized
[   37.012000] Bluetooth: RFCOMM ver 1.8
[   39.672000] Clocksource tsc unstable (delta = -141559568 ns)
[   96.228000] /usr/src/modules/gspca/gspca_core.c: [spca5xx_open:1919] DEALLOC error on spca50x_init_source
[   96.228000] 
[   99.364000] SoftMAC: Open Authentication completed with 00:1c:a2:b0:49:70
[  101.688000] ieee80211_crypt: registered algorithm 'TKIP'
[  241.628000] /usr/src/modules/gspca/gspca_core.c: [spca5xx_open:1919] DEALLOC error on spca50x_init_source
[  241.628000]

Codice: Seleziona tutto

zio@ubuntu:~$ tail -f /var/log/messages
Mar  5 10:59:29 ubuntu kernel: [   39.672000] Clocksource tsc unstable (delta = -141559568 ns)
Mar  5 11:00:26 ubuntu kernel: [   96.228000] /usr/src/modules/gspca/gspca_core.c: [spca5xx_open:1919] DEALLOC error on spca50x_init_source
Mar  5 11:00:26 ubuntu kernel: [   96.228000] 
Mar  5 11:00:26 ubuntu dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth1 for sub-path eth1.dbus.get.reason
Mar  5 11:00:29 ubuntu kernel: [   99.364000] SoftMAC: Open Authentication completed with 00:1c:a2:b0:49:70
Mar  5 11:00:43 ubuntu dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth1 for sub-path eth1.dbus.get.host_name
Mar  5 11:00:43 ubuntu dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth1 for sub-path eth1.dbus.get.nis_domain
Mar  5 11:00:43 ubuntu dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth1 for sub-path eth1.dbus.get.nis_servers
Mar  5 11:02:51 ubuntu kernel: [  241.628000] /usr/src/modules/gspca/gspca_core.c: [spca5xx_open:1919] DEALLOC error on spca50x_init_source
Mar  5 11:02:51 ubuntu kernel: [  241.628000]

Si io ho risolto...ho modificato il mio ultimo post con le procedure che mi sono venute in mente....spero ti possano essere utili...

gugolizzo un pò su questo errore....DEALLOC error on spca50x_init_source
Ciao

Da questo sito...

http://blog.janus.cx/archives/240-gspca ... 1400T.html

Thursday, December 6. 2007
gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source with Trust WB-1400T
Thursday, 06th of December 2007 08:25 Desk@Home

Trying to access the /dev/video0 device created by the spca5xx driver used for handling a Trust WB-1400T webcam, the error message

gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

appeared.

To solution ( found at this mailinglist ) is to fix an entry in the file drivers/usr/pac207.h and change an entry around 137 from

if (id[0] != 0x27 || id[1] != 0x00)

to

if (id[0] != 0x27 || id[1] != 0x08)

unloading and recompiling the module fixes this error.

Thursday, 06th of December 2007 08:29 Desk@Home

----------------------------------------------------------------------
Spero possa esserti utile.
CIAO

vado per gradi:

Codice: Seleziona tutto

zio@ubuntu:~$ wget http://mxhaard.free.fr/spca50x/Download/gspcav1-20071224.tar.gz
--11:17:48--  http://mxhaard.free.fr/spca50x/Download/gspcav1-20071224.tar.gz
           => `gspcav1-20071224.tar.gz'
Risoluzione di mxhaard.free.fr in corso... 212.27.63.150
Connessione a mxhaard.free.fr|212.27.63.150:80... connesso.
HTTP richiesta inviata, aspetto la risposta... 200 OK
Lunghezza: 214,717 (210K) [application/x-gzip]

100%[====================================>] 214,717       36.30K/s    ETA 00:00

11:17:54 (36.79 KB/s) - "gspcav1-20071224.tar.gz" salvato [214717/214717]

Codice: Seleziona tutto

zio@ubuntu:~$ tar xvfz gspcav1-20071224.tar.gzgspcav1-20071224/
gspcav1-20071224/decoder/
gspcav1-20071224/decoder/gspcadecoder.c
gspcav1-20071224/decoder/gspcadecoder.h
gspcav1-20071224/decoder/gspcadecoder-OSX.c
gspcav1-20071224/decoder/gspcadecoder-OSX.h
gspcav1-20071224/Makefile
gspcav1-20071224/Vimicro/
gspcav1-20071224/Vimicro/vc032x_sensor.h
gspcav1-20071224/Vimicro/zc3xx.h
gspcav1-20071224/Vimicro/cs2102.h
gspcav1-20071224/Vimicro/vc032x.h
gspcav1-20071224/Vimicro/pas106b.h
gspcav1-20071224/Vimicro/icm105a.h
gspcav1-20071224/Vimicro/hv7131b.h
gspcav1-20071224/Vimicro/hv7131c.h
gspcav1-20071224/Vimicro/pb0330.h
gspcav1-20071224/Vimicro/ov7630c.h
gspcav1-20071224/Vimicro/mc501cb.h
gspcav1-20071224/Vimicro/tas5130c_vf0250.h
gspcav1-20071224/Vimicro/ov7620.h
gspcav1-20071224/Vimicro/tas5130c.h
gspcav1-20071224/Vimicro/hdcs2020.h
gspcav1-20071224/Etoms/
gspcav1-20071224/Etoms/et61xx51.h
gspcav1-20071224/Sonix/
gspcav1-20071224/Sonix/sn9cxxx.h
gspcav1-20071224/Sonix/sonix.h
gspcav1-20071224/utils/
gspcav1-20071224/utils/spcagamma.h
gspcav1-20071224/utils/spcausb.h
gspcav1-20071224/utils/spcaCompat.h
gspcav1-20071224/Conexant/
gspcav1-20071224/Conexant/cx11646.h
gspcav1-20071224/Conexant/cxlib.h
gspcav1-20071224/Pixart/
gspcav1-20071224/Pixart/pac207-OSX.h
gspcav1-20071224/Pixart/pac7311.h
gspcav1-20071224/Pixart/pac207.h
gspcav1-20071224/changelog
gspcav1-20071224/license
gspcav1-20071224/gspca_core.c
gspcav1-20071224/Transvision/
gspcav1-20071224/Transvision/tv8532.h
gspcav1-20071224/Makefile.kld
gspcav1-20071224/gspca.h
gspcav1-20071224/Sunplus/
gspcav1-20071224/Sunplus/spca501.dat
gspcav1-20071224/Sunplus/spca505.dat
gspcav1-20071224/Sunplus/spca508.dat
gspcav1-20071224/Sunplus/spca561-OSX.h
gspcav1-20071224/Sunplus/spca506.h
gspcav1-20071224/Sunplus/spca561.h
gspcav1-20071224/Sunplus/spca501_init.h
gspcav1-20071224/Sunplus/spca508_init-OSX.h
gspcav1-20071224/Sunplus/spca508_init.h
gspcav1-20071224/Sunplus/spca501_init-OSX.h
gspcav1-20071224/Sunplus/spca505_init.h
gspcav1-20071224/Sunplus-jpeg/
gspcav1-20071224/Sunplus-jpeg/spca500.dat
gspcav1-20071224/Sunplus-jpeg/jpeg_qtables.h
gspcav1-20071224/Sunplus-jpeg/sp5xxfw2.h
gspcav1-20071224/Sunplus-jpeg/sp5xxfw2.dat
gspcav1-20071224/Sunplus-jpeg/spca500_init.h
gspcav1-20071224/gspca_build
gspcav1-20071224/READ_AND_INSTALL
gspcav1-20071224/Mars-Semi/
gspcav1-20071224/Mars-Semi/mr97311.h
gspcav1-20071224/cutlog.py

Codice: Seleziona tutto

zio@ubuntu:~$ cd gspcav1-20071224/

Codice: Seleziona tutto

zio@ubuntu:~/gspcav1-20071224$ sudo make
[sudo] password for zio:
make -C /lib/modules/`uname -r`/build SUBDIRS=/home/zio/gspcav1-20071224 CC=cc modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.22-14-generic'
  Building modules, stage 2.
  MODPOST 1 modules
make[1]: Leaving directory `/usr/src/linux-headers-2.6.22-14-generic'
zio@ubuntu:~/gspcav1-20071224$ sudo make install
mkdir -p /lib/modules/`uname -r`/kernel/drivers/usb/media/
rm -f /lib/modules/`uname -r`/kernel/drivers/usb/media/spca5xx.ko
rm -f /lib/modules/`uname -r`/kernel/drivers/media/video/gspca.ko
install -c -m 0644 gspca.ko /lib/modules/`uname -r`/kernel/drivers/usb/media/
/sbin/depmod -ae

?

sudo ./gspca_build
sudo modprobe gspca

?
dal read and install....
Compiling it
============
The driver module can be built without modifying your kernel source tree.

Before trying to compile the driver, ensure that you've configured your
kernel, and updated the dependencies:
'make [config|menuconfig|xconfig]; make dep'.

Make sure, when compiling the driver, you use the same version of compiler as
was used to compile your kernel. Not doing so can create incompatible binaries.

[glow=red,2,300]as root
goes to gspcav1 directory and run:
./gspca_build

if all goes right the module is compiled and load in memory[/glow]
if not, errors messages can be found in kgspca.err You should post this file to the maintainer
or in the sourceforge project bugs report. .

Comunque....
Come và? hai risolto?

allora il portatile adesso va
sto cercando di far andare il fisso

E vai!

vabbè è già qualcosa
il portatile funziona ma il fisso no, forse perchè ho installato il kernel a bassa latenza rt?
grazie tante (b2b)

Forum Ubuntu-it

[Driver] Webcam trust wb-1100 g su Ubuntu 7.10

[Driver] Webcam trust wb-1100 g su Ubuntu 7.10

Re: [Driver] Webcam trust wb-1100 g su Ubuntu 7.10

Re: [Driver] Webcam trust wb-1100 g su Ubuntu 7.10

errore

Re: [Driver] Webcam trust wb-1100 g su Ubuntu 7.10

Re: [Driver] Webcam trust wb-1100 g su Ubuntu 7.10

Re: [Driver] Webcam trust wb-1100 g su Ubuntu 7.10

Re: [Driver] Webcam trust wb-1100 g su Ubuntu 7.10

Re: [Driver] Webcam trust wb-1100 g su Ubuntu 7.10

Re: [Driver] Webcam trust wb-1100 g su Ubuntu 7.10

Re: [Driver] Webcam trust wb-1100 g su Ubuntu 7.10

Re: [Driver] Webcam trust wb-1100 g su Ubuntu 7.10

Re: [Driver] Webcam trust wb-1100 g su Ubuntu 7.10

Re: [Driver] Webcam trust wb-1100 g su Ubuntu 7.10