ho una scheda video nvidia geforce go 7400.
ho provato a seguire questa guida http://forum.ubuntu-it.org/viewtopic.php?t=68703
e quella nel wiki http://wiki.ubuntu-it.org/Hardware/Vide ... 8nvidia%29
così facendo nella tv appare solo il mio sfondo e in basso una barra delle applicazioni di ubuntu (quella standard) che io nemmeno uso nel mio pc.
è come se apparisse un'altro desktop, non il mio e non si vede altro sulla tv qualunque cosa io faccia.
io vorrei solo vedere dei film sulla tv collegando il mio pc ad essa, ho provato anche con nvtv ma il risultato è questo:
fabio@fabio-laptop:~$ nvtv
Fatal: No supported video card found.
non so più cosa cosa fare,sicuramente sbaglio io ma non capisco dove.....qualcuno mi da una mano?
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder3) Thu Oct 4 10:34:46 PDT 2007
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
EndSection
Section "Files"
EndSection
Section "Module"
Load "glx"
Load "v4l"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "Monitor Generico"
VendorName "Generic LCD Display"
ModelName "LCD Panel 1280x800"
HorizSync 31.0 - 50.0
VertRefresh 56.0 - 65.0
Gamma 1
ModeLine "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
ModeLine "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "1280x768@60" 80.0 1280 1344 1480 1680 768 769 772 795 -hsync +vsync
ModeLine "1280x720@60" 74.0 1280 1336 1472 1664 720 721 724 746 -hsync +vsync
ModeLine "1280x800@60" 83.0 1280 1344 1480 1680 800 801 804 828 -hsync +vsync
EndSection
Section "Monitor"
#
Identifier "monitor1"
VendorName "Unknown"
ModelName "TV-0"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Gamma 1
ModeLine "640x480@60" 25.0 640 656 752 800 480 490 492 525 -hsync -vsync
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Nvidia Default Flat Panel"
HorizSync 29.0 - 49.0
VertRefresh 0.0 - 61.0
EndSection
Section "Device"
Identifier "nVidia Corporation G72M [GeForce Go 7400]"
Driver "nvidia"
BoardName "nv"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
#
Identifier "device1"
Driver "nvidia"
BoardName "nv"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce Go 7400"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce Go 7400"
BusID "PCI:1:0:0"
Screen 1
Option "TwinView" "true"
Option "TwinViewOrientation" "Clone"
Option "TVOutFormat" "S-VIDEO"
Option "TVStandard" "PAL-B"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
Option "MetaModes" "1024x768,1024x768;800x600,800x600;640x480,640x480; 512x384,512x384"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation G72M [GeForce Go 7400]"
Monitor "Monitor Generico"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Virtual 1280 800
Depth 24
Modes "1280x800@60" "1280x720@60" "1280x768@60" "800x600@60" "800x600@56"
EndSubSection
EndSection
Section "Screen"
#
Identifier "screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "TV: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP: nvidia-auto-select +0+0; DFP: 1280x720@60 +0+0; DFP: 800x600@60 +0+0; DFP: 800x600@56 +0+0"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
