Pagina 1 di 1

configurazione nvidia svideo

Inviato: sabato 29 dicembre 2007, 14:30
da SAKO
ciao a tutti, ho problemi a configuare l'uscita tv del mio portatile,spero che qualcuno abbia voglia aiutarmi!
ho una scheda video nvidia geforce go 7400.
ho provato a seguire questa guida http://forum.ubuntu-it.org/viewtopic.php?t=68703
e quella nel wiki http://wiki.ubuntu-it.org/Hardware/Vide ... 8nvidia%29
così facendo nella tv appare solo il mio sfondo e in basso una barra delle applicazioni di ubuntu (quella standard) che io nemmeno uso nel mio pc.
è come se apparisse un'altro desktop, non il mio e non si vede altro sulla tv qualunque cosa io faccia.
io vorrei solo vedere dei film sulla tv collegando il mio pc ad essa, ho provato anche con nvtv ma il risultato è questo:
fabio@fabio-laptop:~$ nvtv
Fatal: No supported video card found.

non so più cosa cosa fare,sicuramente sbaglio io ma non capisco dove.....qualcuno mi da una mano? :(
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder3)  Thu Oct  4 10:34:46 PDT 2007

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#  sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"

# Uncomment if you have a wacom tablet
# InputDevice    "stylus" "SendCoreEvents"
# InputDevice    "cursor" "SendCoreEvents"
# InputDevice    "eraser" "SendCoreEvents"
    Identifier    "Default Layout"
    Screen      0  "Screen0" 0 0
    Screen      1  "Screen1" RightOf "Screen0"
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice    "Synaptics Touchpad"
EndSection

Section "Files"
EndSection

Section "Module"
    Load          "glx"
    Load          "v4l"
EndSection

Section "ServerFlags"
    Option        "Xinerama" "0"
EndSection

Section "InputDevice"
    Identifier    "Generic Keyboard"
    Driver        "kbd"
    Option        "CoreKeyboard"
    Option        "XkbRules" "xorg"
    Option        "XkbModel" "pc105"
    Option        "XkbLayout" "it"
EndSection

Section "InputDevice"
    Identifier    "Configured Mouse"
    Driver        "mouse"
    Option        "CorePointer"
    Option        "Device" "/dev/input/mice"
    Option        "Protocol" "ImPS/2"
    Option        "ZAxisMapping" "4 5"
    Option        "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
    Identifier    "Synaptics Touchpad"
    Driver        "synaptics"
    Option        "SendCoreEvents" "true"
    Option        "Device" "/dev/psaux"
    Option        "Protocol" "auto-dev"
    Option        "HorizEdgeScroll" "0"
EndSection

Section "InputDevice"
    Identifier    "stylus"
    Driver        "wacom"
    Option        "Device" "/dev/input/wacom"
    Option        "Type" "stylus"
    Option        "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
    Identifier    "eraser"
    Driver        "wacom"
    Option        "Device" "/dev/input/wacom"
    Option        "Type" "eraser"
    Option        "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
    Identifier    "cursor"
    Driver        "wacom"
    Option        "Device" "/dev/input/wacom"
    Option        "Type" "cursor"
    Option        "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Monitor"
    Identifier    "Monitor Generico"
    VendorName    "Generic LCD Display"
    ModelName      "LCD Panel 1280x800"
    HorizSync      31.0 - 50.0
    VertRefresh    56.0 - 65.0
    Gamma          1
    ModeLine      "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    ModeLine      "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    ModeLine      "1280x768@60" 80.0 1280 1344 1480 1680 768 769 772 795 -hsync +vsync
    ModeLine      "1280x720@60" 74.0 1280 1336 1472 1664 720 721 724 746 -hsync +vsync
    ModeLine      "1280x800@60" 83.0 1280 1344 1480 1680 800 801 804 828 -hsync +vsync
EndSection

Section "Monitor"
#     
    Identifier    "monitor1"
    VendorName    "Unknown"
    ModelName      "TV-0"
    HorizSync      28.0 - 33.0
    VertRefresh    43.0 - 72.0
    Gamma          1
    ModeLine      "640x480@60" 25.0 640 656 752 800 480 490 492 525 -hsync -vsync
EndSection

Section "Monitor"
    Identifier    "Monitor0"
    VendorName    "Unknown"
    ModelName      "Nvidia Default Flat Panel"
    HorizSync      29.0 - 49.0
    VertRefresh    0.0 - 61.0
EndSection

Section "Device"
    Identifier    "nVidia Corporation G72M [GeForce Go 7400]"
    Driver        "nvidia"
    BoardName      "nv"
    BusID          "PCI:1:0:0"
    Screen          0
EndSection

Section "Device"
#     
    Identifier    "device1"
    Driver        "nvidia"
    BoardName      "nv"
    BusID          "PCI:1:0:0"
    Screen          1
EndSection

Section "Device"
    Identifier    "Videocard0"
    Driver        "nvidia"
    VendorName    "NVIDIA Corporation"
    BoardName      "GeForce Go 7400"
    BusID          "PCI:1:0:0"
    Screen          0
EndSection

Section "Device"
    Identifier    "Videocard1"
    Driver        "nvidia"
    VendorName    "NVIDIA Corporation"
    BoardName      "GeForce Go 7400"
    BusID          "PCI:1:0:0"
    Screen          1
    Option "TwinView" "true"
    Option "TwinViewOrientation" "Clone"
    Option "TVOutFormat" "S-VIDEO"
    Option "TVStandard" "PAL-B"
    Option "SecondMonitorHorizSync" "30-50"
    Option "SecondMonitorVertRefresh" "60"
    Option "MetaModes" "1024x768,1024x768;800x600,800x600;640x480,640x480;    512x384,512x384"
EndSection

Section "Screen"
    Identifier    "Default Screen"
    Device        "nVidia Corporation G72M [GeForce Go 7400]"
    Monitor        "Monitor Generico"
    DefaultDepth    24
    Option        "AddARGBGLXVisuals" "True"
    SubSection    "Display"
        Virtual    1280 800
        Depth      24
        Modes      "1280x800@60" "1280x720@60" "1280x768@60" "800x600@60" "800x600@56"
    EndSubSection
EndSection

Section "Screen"
#     
    Identifier    "screen1"
    Device        "Videocard1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option        "TwinView" "0"
    Option        "metamodes" "TV: nvidia-auto-select +0+0"
    SubSection    "Display"
        Depth      24
    EndSubSection
EndSection

Section "Screen"
    Identifier    "Screen0"
    Device        "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option        "TwinView" "0"
    Option        "metamodes" "DFP: nvidia-auto-select +0+0; DFP: 1280x720@60 +0+0; DFP: 800x600@60 +0+0; DFP: 800x600@56 +0+0"
EndSection

Section "Extensions"
    Option        "Composite" "Enable"
EndSection

Re: configurazione nvidia svideo

Inviato: martedì 5 maggio 2009, 23:03
da mixtico
Beato te che almeno riesci a vedere un desktop!! Sono 3 giorni che smanetto e non sono riuscito ancora a far rilevare la TV collegata in S-Video!!! Le ho provate tutte!!!  >:(
Nemmeno con il Twinview sono riuscito a far comparire un secondo monitor!!  :'(