Pagina 1 di 1

Aiuto .... Non riesco a far funzionare il 3D con la scheda K8M890 (OpenChrome) !

Inviato: domenica 10 febbraio 2008, 10:13
da dadaloop
Ciao Ragazzi, mi ritengo un pò esperto di linux  e per tanti problemi riesco a cavarmela ma in questo non vedo proprio soluzione  >:( ... ho cercato su internet le procedure, le ho anche provate, ma il risultato è sempre lo stesso : il driver funzionava ma il 3D era completamente assente!!  :o Poi leggo in un blog che la scheda video K8M890 montata su scheda madre : K9VGM-V non sopporta il 3D e allora mi sono messo a mettermi le mani nei capelli!  :'( Come mai una scheda video così potente con 256Mb non sopporta il 3D ??  (mad) Vi prego aiutatemi, illuminatemi voi ... considerate che ho seguito le istruzioni del sito https://help.ubuntu.com/community/OpenChrome?highlight=%28openchrome%29 ed il risultato si vede sopra!  Il driver funziona ma il 3D no .... ci sono delle speranze ??  :-[ Vi prego, mi piacerebbe tanto ... non vorrei comprare una scheda esterna PCI-E!!! Grazie infinite a tutti! Ah... uso ubuntu 7.10 aggiornato ....!!  A chi mi aiuta offro volentieri una birra !!! (b2b)

Re: Aiuto .... Non riesco a far funzionare il 3D con la scheda K8M890 (OpenChrom

Inviato: domenica 10 febbraio 2008, 11:23
da ethyl
non so se hai provato questo driver dovrebbe essere l'ultimo disponibile

Re: Aiuto .... Non riesco a far funzionare il 3D con la scheda K8M890 (OpenChrom

Inviato: domenica 10 febbraio 2008, 12:05
da dadaloop
ma con xorg.conf come procedo ? Cioè installo il driver e poi .... ? Lo autorileva o devo mettere openchrome in xorg.conf ? Grazie infinite (una birra per ethyl!)

Re: Aiuto .... Non riesco a far funzionare il 3D con la scheda K8M890 (OpenChrom

Inviato: domenica 10 febbraio 2008, 12:23
da ethyl
dovresti dire  a xorg di usarlo , ma non so ti darà il 3D.....

Re: Aiuto .... Non riesco a far funzionare il 3D con la scheda K8M890 (OpenChrom

Inviato: domenica 10 febbraio 2008, 12:41
da dadaloop
come mai il 3d è così difficoltoso per questa scheda ? Qualcuno sà qualcosa ?  ???

Re: Aiuto .... Non riesco a far funzionare il 3D con la scheda K8M890 (OpenChrom

Inviato: domenica 10 febbraio 2008, 14:17
da dadaloop
Ragazzi aiuto ... ho installato il driver openchrome ....
Il fatto e' che ora tutta la grafica mi va paurosamente lenta, solo a disegnare lo sfondo ci mette 5 secondi e lo fa a pezzi ... aiuto!!

ora glxinfo mi dice :

Codice: Seleziona tutto

name of display: :1.0
display: :1  screen: 0
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating, 
    GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method, 
    GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe, 
    GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, 
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory, 
    GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control, 
    GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control, 
    GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync, 
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, 
    GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, 
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method, 
    GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_fbconfig, 
    GLX_EXT_texture_from_pixmap
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (2.1 Mesa 7.0.1)
OpenGL extensions:
    GL_ARB_depth_texture, GL_ARB_fragment_program, GL_ARB_imaging, 
    GL_ARB_multitexture, GL_ARB_point_parameters, GL_ARB_point_sprite, 
    GL_ARB_shadow, GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp, 
    GL_ARB_texture_cube_map, GL_ARB_texture_env_add, 
    GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar, 
    GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat, 
    GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle, 
    GL_ARB_transpose_matrix, GL_ARB_vertex_program, GL_ARB_window_pos, 
    GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color, GL_EXT_blend_func_separate, 
    GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract, 
    GL_EXT_clip_volume_hint, GL_EXT_copy_texture, GL_EXT_draw_range_elements, 
    GL_EXT_fog_coord, GL_EXT_framebuffer_object, GL_EXT_multi_draw_arrays, 
    GL_EXT_packed_pixels, GL_EXT_point_parameters, GL_EXT_polygon_offset, 
    GL_EXT_rescale_normal, GL_EXT_secondary_color, 
    GL_EXT_separate_specular_color, GL_EXT_shadow_funcs, GL_EXT_stencil_wrap, 
    GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D, 
    GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add, 
    GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3, 
    GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_texture_rectangle, 
    GL_EXT_vertex_array, GL_APPLE_packed_pixels, GL_ATI_texture_env_combine3, 
    GL_ATI_texture_mirror_once, GL_ATIX_texture_env_combine3, 
    GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate, 
    GL_MESA_pack_invert, GL_MESA_ycbcr_texture, GL_NV_blend_square, 
    GL_NV_point_sprite, GL_NV_texgen_reflection, GL_NV_texture_rectangle, 
    GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp, 
    GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SGIX_depth_texture, 
    GL_SGIX_shadow, GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays

   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x2c 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x2d 24 tc  0 32  0 r  .  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x2e 32 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 Ncon
0x2f 32 tc  0 32  0 r  .  .  8  8  8  8  0  0  0  0  0  0  0  0 0 Ncon
e sto usando questo xorg.conf :

Codice: Seleziona tutto

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Module"
Load "glx"
Load "xtrap"
Load "record"
Load "GLcore"
Load "dri"
EndSection


Section "Files"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"it"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"stylus"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"eraser"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"cursor"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"Generic Video Card"
	Driver		"openchrome"
	BusID		"PCI:1:0:0"
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	Option		"DPMS"
	HorizSync	30-70
	VertRefresh	50-160
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Generic Video Card"
	Monitor		"Generic Monitor"
	DefaultDepth	24
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"

# Uncomment if you have a wacom tablet
#	InputDevice     "stylus"	"SendCoreEvents"
#	InputDevice     "cursor"	"SendCoreEvents"
#	InputDevice     "eraser"	"SendCoreEvents"
EndSection


Un caloroso GRAZIE a chi mi aiuta... veramente ho bisogno di qualcuno che conosca la soluzione !!! Graziee!!!

Re: Aiuto .... Non riesco a far funzionare il 3D con la scheda K8M890 (OpenChrom

Inviato: domenica 23 marzo 2008, 20:56
da E-Vampire
Non ne sono sicuro ma credo tu debba usare "via" come nome per il driver e non "openchrome".
Controlla un pò.