Però mi domando...io che ho scheda video, audio, madwifi e svariati programmi installati direttamente dal sorgente (compilanti e poi installati), se seguissi questa guida dovrei rifare tutto da capo?
La guida è
nella mia infinita ignoranza pare che si ricompilino i moduli....ma quelli già esistenti?First thing is to install the firmware for the bcm43xx
$wget http://downloads.openwrt.org/sources/br ... .0.tar.bz2
$sudo apt-get install bcm43xx-fwcutter
$sudo bcm43xx-fwcutter -w /lib/firmware wl_apsta-3.130.20.0.o
Now the firmware is in the right place and correct.
$wget http://patches.aircrack-ng.org/bcm43xx- ... 6.22.patch
$sudo apt-get install linux-source-2.6.22 build-essential gawk
ok now we should have everything needed to put together the patch and install it
$cd /usr/src
$tar jxvf linux-source-2.6.22.tar.bz2
$cd linux-source-2.6.22
$sudo cp ~/bcm43xx-injection-linux-2.6.22.patch bcm43xx-injection-linux-2.6.22.patch
$sudo cp ../linux-headers-2.6.22-14-generic/.config .config
$sudo patch -p1 -i bcm43xx-injection-linux-2.6.22.patch
should say something like patching file blah blah I dont remember exactly. Just as long as you dont see failed Wink
Now it is time to compile our driver
$sudo make modules
This part take forever...*Suggest you go see a movie*
$sudo make modules_install
Now we should have the .ko file we need
$sudo cp /usr/src/linux-source-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx.ko /lib/modules/2.6.22-14-generic/kernel/drivers/net/wireless/bcm43xx/bcm43xx.ko
$sudo rmmod bcm43xx
$sudo modprobe bcm43xx
$sudo reboot
Ok now we should have a patched driver for our wireless card...Yay!!!
Grazie per il vostro costante aiuto