[risolto]Problema con driver ATI

[demish]

ok ora provo

[demish]

niente da fare la situazione non cambia, su restricted manager c'è selezionata la casella di spunta ma i driver risultano non in uso, infatto da fglrx risultano ancora i mesa.

ti riposto lsmod:

Codice: Seleziona tutto

massi@massi-laptop:~$ lsmod
Module                  Size  Used by
ipv6                  273892  8 
xt_limit                3584  0 
xt_tcpudp               4224  0 
ipt_LOG                 7552  0 
ipt_MASQUERADE          4608  0 
ipt_TOS                 3200  0 
ipt_REJECT              5760  0 
nf_conntrack_irc        8088  0 
nf_conntrack_ftp       11136  0 
xt_state                3456  0 
af_packet              24840  2 
binfmt_misc            12936  1 
vboxdrv                61104  0 
ppdev                  10244  0 
parport_pc             37412  0 
lp                     12580  0 
parport                37448  3 ppdev,parport_pc,lp
acpi_cpufreq           10568  0 
cpufreq_stats           7232  0 
cpufreq_ondemand        9612  1 
freq_table              5792  3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
cpufreq_userspace       5280  0 
cpufreq_conservative     8072  0 
cpufreq_powersave       2688  0 
button                  8976  0 
sbs                    19592  0 
container               5504  0 
battery                11012  0 
dock                   10656  0 
video                  18060  0 
ac                      6148  0 
joydev                 11328  0 
snd_intel8x0           34972  1 
snd_ac97_codec        100644  1 snd_intel8x0
ac97_bus                3200  1 snd_ac97_codec
snd_pcm_oss            44672  0 
snd_mixer_oss          17664  1 snd_pcm_oss
snd_pcm                80388  3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy           4740  0 
pcmcia                 41388  0 
snd_seq_oss            33152  0 
snd_seq_midi            9600  0 
snd_rawmidi            25728  1 snd_seq_midi
snd_seq_midi_event      8448  2 snd_seq_oss,snd_seq_midi
serio_raw               8068  0 
psmouse                39952  0 
snd_seq                53232  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              24324  2 snd_pcm,snd_seq
snd_seq_device          9228  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
ipw2200               149320  0 
ieee80211              35656  1 ipw2200
tifm_7xx1               8576  0 
tifm_core              11268  1 tifm_7xx1
sdhci                  18828  0 
mmc_core               28420  1 sdhci
yenta_socket           27532  1 
rsrc_nonstatic         14080  1 yenta_socket
pcmcia_core            40980  3 pcmcia,yenta_socket,rsrc_nonstatic
snd                    54660  12 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
ieee80211_crypt         7040  1 ieee80211
iTCO_wdt               11940  0 
iTCO_vendor_support     4868  1 iTCO_wdt
soundcore               8800  1 snd
snd_page_alloc         11400  2 snd_intel8x0,snd_pcm
intel_agp              25620  0 
shpchp                 34580  0 
pci_hotplug            32704  1 shpchp
agpgart                35016  1 intel_agp
evdev                  11136  5 
iptable_nat             8708  0 
nf_nat                 20140  2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4      19724  2 iptable_nat
nf_conntrack           65288  7 ipt_MASQUERADE,nf_conntrack_irc,nf_conntrack_ftp,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4
nfnetlink               6936  3 nf_nat,nf_conntrack_ipv4,nf_conntrack
iptable_mangle          3840  0 
iptable_filter          3968  0 
ip_tables              13924  3 iptable_nat,iptable_mangle,iptable_filter
x_tables               16260  9 xt_limit,xt_tcpudp,ipt_LOG,ipt_MASQUERADE,ipt_TOS,ipt_REJECT,xt_state,iptable_nat,ip_tables
ext3                  133896  1 
jbd                    60456  1 ext3
mbcache                 9732  1 ext3
sg                     36764  0 
sd_mod                 30336  5 
sr_mod                 17828  0 
cdrom                  37536  1 sr_mod
ahci                   23300  0 
8139cp                 25088  0 
ata_piix               17540  4 
8139too                27776  0 
mii                     6528  2 8139cp,8139too
ata_generic             8452  0 
libata                125168  3 ahci,ata_piix,ata_generic
scsi_mod              147084  4 sg,sd_mod,sr_mod,libata
ohci1394               36528  0 
ieee1394               96312  1 ohci1394
ehci_hcd               36492  0 
uhci_hcd               26640  0 
usbcore               138632  3 ehci_hcd,uhci_hcd
thermal                14344  0 
processor              32072  2 acpi_cpufreq,thermal
fan                     5764  0 
fuse                   47124  5 
apparmor               40728  0 
commoncap               8320  1 apparmor

e dmesg

Codice: Seleziona tutto

[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   261856
[    0.000000] On node 0 totalpages: 261856
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 253 pages used for memmap
[    0.000000]   HighMem zone: 32227 pages, LIFO batch:7
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP signature @ 0xC00F6980 checksum 0
[    0.000000] ACPI: RSDP 000F6980, 0014 (r0 TOSCPL)
[    0.000000] ACPI: RSDT 3FEE276F, 0044 (r1 TOSCPL   RSDT    6040000  LTP        0)
[    0.000000] ACPI: APIC 3FEE9E88, 0068 (r1 INTEL  ALVISO    6040000 LOHR       5F)
[    0.000000] ACPI: FACP 3FEE9EF0, 0074 (r1 TOSCPL ALVISO    6040000 LOHR       32)
[    0.000000] ACPI: DSDT 3FEE3217, 6C71 (r1 TOSCPL ALVISO    6040000 MSFT  100000E)
[    0.000000] ACPI: FACS 3FEFAFC0, 0040
[    0.000000] ACPI: BOOT 3FEE9FD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
[    0.000000] ACPI: MCFG 3FEE9F9C, 003C (r1 INTEL  ALVISO    6040000 LOHR       5F)
[    0.000000] ACPI: SSDT 3FEE2FE5, 022E (r1 SataRe SataAhci     1000 INTL 20030224)
[    0.000000] ACPI: SSDT 3FEE2BAA, 022B (r1  PmRef  Cpu0Ist     3000 INTL 20030224)
[    0.000000] ACPI: SSDT 3FEE29CC, 01DE (r1  PmRef  Cpu0Cst     3001 INTL 20030224)
[    0.000000] ACPI: SSDT 3FEE27B3, 0219 (r1  PmRef    CpuPm     3000 INTL 20030224)
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:13 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[    0.000000] Built 1 zonelists.  Total pages: 259811
[    0.000000] Kernel command line: root=UUID=f470dd2b-055d-4a13-9a0d-93b72dbdf133 ro quiet splash locale=it_IT
[    0.000000] mapped APIC to ffffd000 (fee00000)
[    0.000000] mapped IOAPIC to ffffc000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1729.077 MHz processor.
[    8.650641] Console: colour VGA+ 80x25
[    8.650945] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    8.651357] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    8.684860] Memory: 1026688k/1047424k available (2015k kernel code, 19980k reserved, 915k data, 364k init, 129920k highmem)
[    8.684869] virtual kernel memory layout:
[    8.684870]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[    8.684872]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    8.684873]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[    8.684874]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[    8.684876]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
[    8.684877]       .data : 0xc02f7e86 - 0xc03dce84   ( 915 kB)
[    8.684878]       .text : 0xc0100000 - 0xc02f7e86   (2015 kB)
[    8.684882] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[    8.684917] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[    8.764911] Calibrating delay using timer specific routine.. 3461.74 BogoMIPS (lpj=6923497)
[    8.764935] Security Framework v1.0.0 initialized
[    8.764942] SELinux:  Disabled at boot.
[    8.764955] Mount-cache hash table entries: 512
[    8.765073] CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000
[    8.765085] CPU: L1 I cache: 32K, L1 D cache: 32K
[    8.765087] CPU: L2 cache: 2048K
[    8.765090] CPU: After all inits, caps: afe9fbff 00000000 00000000 00002040 00000180 00000000 00000000
[    8.765099] Compat vDSO mapped to ffffe000.
[    8.765110] Checking 'hlt' instruction... OK.
[    8.780998] SMP alternatives: switching to UP code
[    8.781162] Freeing SMP alternatives: 11k freed
[    8.781406] Early unpacking initramfs... done
[    9.118440] ACPI: Core revision 20070126
[    9.118515] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[    9.126695] CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
[    9.126719] Total of 1 processors activated (3461.74 BogoMIPS).
[    9.126908] ENABLING IO-APIC IRQs
[    9.127101] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[    9.272777] Brought up 1 CPUs
[    9.272875] Booting paravirtualized kernel on bare hardware
[    9.272945] Time: 23:33:49  Date: 01/24/108
[    9.272964] NET: Registered protocol family 16
[    9.273034] EISA bus registered
[    9.273048] ACPI: bus type pci registered
[    9.273439] PCI: PCI BIOS revision 2.10 entry at 0xfd924, last bus=7
[    9.273441] PCI: Using configuration type 1
[    9.273443] Setting up standard PCI resources
[    9.277220] ACPI: EC: Look up EC in DSDT
[    9.277816] ACPI: EC: GPE=0x1d, ports=0x66, 0x62
[    9.279358] ACPI: Interpreter enabled
[    9.279361] ACPI: (supports S0 S3 S4 S5)
[    9.279376] ACPI: Using IOAPIC for interrupt routing
[    9.321330] ACPI: EC: GPE=0x1d, ports=0x66, 0x62
[    9.321368] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    9.321376] PCI: Probing PCI hardware (bus 00)
[    9.322028] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[    9.322032] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[    9.322974] PCI: Transparent bridge - 0000:00:1e.0
[    9.323092] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    9.323370] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    9.323507] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    9.323636] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    9.323776] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    9.330470] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    9.330569] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    9.330666] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    9.330762] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    9.330858] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    9.330955] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    9.331055] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    9.331152] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    9.331243] Linux Plug and Play Support v0.97 (c) Adam Belay
[    9.331251] pnp: PnP ACPI init
[    9.331258] ACPI: bus type pnp registered
[    9.352900] pnp: PnP ACPI: found 9 devices
[    9.352902] ACPI: ACPI bus type pnp unregistered
[    9.352906] PnPBIOS: Disabled by ACPI PNP
[    9.352943] PCI: Using ACPI for IRQ routing
[    9.352945] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    9.375050] NET: Registered protocol family 8
[    9.375052] NET: Registered protocol family 20
[    9.375094] pnp: 00:01: ioport range 0xfe00-0xfe7f has been reserved
[    9.375097] pnp: 00:01: ioport range 0xfe80-0xfeff has been reserved
[    9.375100] pnp: 00:01: ioport range 0xff00-0xff7f has been reserved
[    9.375103] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[    9.375107] pnp: 00:01: iomem range 0xf0000000-0xf0003fff could not be reserved
[    9.375110] pnp: 00:01: iomem range 0xf0004000-0xf0004fff could not be reserved
[    9.375113] pnp: 00:01: iomem range 0xf0005000-0xf0005fff could not be reserved
[    9.376705] Time: tsc clocksource has been installed.
[    9.405365] PCI: Bridge: 0000:00:01.0
[    9.405367]   IO window: 3000-3fff
[    9.405371]   MEM window: b8100000-b81fffff
[    9.405374]   PREFETCH window: c8000000-cfffffff
[    9.405378] PCI: Bridge: 0000:00:1c.0
[    9.405381]   IO window: 4000-4fff
[    9.405386]   MEM window: bc000000-bfffffff
[    9.405391]   PREFETCH window: d0000000-d3ffffff
[    9.405397] PCI: Bridge: 0000:00:1c.1
[    9.405400]   IO window: 5000-5fff
[    9.405405]   MEM window: c0000000-c3ffffff
[    9.405410]   PREFETCH window: d4000000-d7ffffff
[    9.405418] PCI: Bus 7, cardbus bridge: 0000:06:04.0
[    9.405421]   IO window: 00006400-000064ff
[    9.405426]   IO window: 00006800-000068ff
[    9.405431]   PREFETCH window: 50000000-53ffffff
[    9.405437]   MEM window: 54000000-57ffffff
[    9.405442] PCI: Bridge: 0000:00:1e.0
[    9.405445]   IO window: 6000-6fff
[    9.405450]   MEM window: c4000000-c40fffff
[    9.405455]   PREFETCH window: 50000000-53ffffff
[    9.405469] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[    9.405474] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    9.405496] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[    9.405501] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    9.405522] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[    9.405527] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    9.405540] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    9.405556] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 16
[    9.405570] NET: Registered protocol family 2
[    9.444704] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    9.444761] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[    9.445931] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    9.446459] TCP: Hash tables configured (established 131072 bind 65536)
[    9.446462] TCP reno registered
[    9.456834] checking if image is initramfs... it is
[    9.908518] Switched to high resolution mode on CPU 0
[   10.117037] Freeing initrd memory: 7114k freed
[   10.117179] Simple Boot Flag at 0x36 set to 0x1
[   10.117411] audit: initializing netlink socket (disabled)
[   10.117427] audit(1203896029.088:1): initialized
[   10.117499] highmem bounce pool size: 64 pages
[   10.119183] VFS: Disk quotas dquot_6.5.1
[   10.119229] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   10.119315] io scheduler noop registered
[   10.119318] io scheduler anticipatory registered
[   10.119320] io scheduler deadline registered
[   10.119336] io scheduler cfq registered (default)
[   10.119431] Boot video device is 0000:01:00.0
[   10.119514] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   10.119542] assign_interrupt_mode Found MSI capability
[   10.119545] Allocate Port Service[0000:00:01.0:pcie00]
[   10.119611] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   10.119662] assign_interrupt_mode Found MSI capability
[   10.119665] Allocate Port Service[0000:00:1c.0:pcie00]
[   10.119696] Allocate Port Service[0000:00:1c.0:pcie02]
[   10.119783] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   10.119834] assign_interrupt_mode Found MSI capability
[   10.119836] Allocate Port Service[0000:00:1c.1:pcie00]
[   10.119864] Allocate Port Service[0000:00:1c.1:pcie02]
[   10.120002] isapnp: Scanning for PnP cards...
[   10.473912] isapnp: No Plug & Play device found
[   10.496670] Real Time Clock Driver v1.12ac
[   10.496773] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   10.497369] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 18
[   10.497378] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
[   10.497870] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   10.498055] input: Macintosh mouse button emulation as /class/input/input0
[   10.498121] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   10.498420] i8042.c: Detected active multiplexing controller, rev 1.1.
[   10.498488] serio: i8042 KBD port at 0x60,0x64 irq 1
[   10.498492] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   10.498498] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   10.498501] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   10.498503] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   10.498657] mice: PS/2 mouse device common for all mice
[   10.498899] EISA: Probing bus 0 at eisa.0
[   10.498907] Cannot allocate resource for EISA slot 1
[   10.498910] Cannot allocate resource for EISA slot 2
[   10.498912] Cannot allocate resource for EISA slot 3
[   10.498914] Cannot allocate resource for EISA slot 4
[   10.498917] Cannot allocate resource for EISA slot 5
[   10.498919] Cannot allocate resource for EISA slot 6
[   10.498929] EISA: Detected 0 cards.
[   10.499083] TCP cubic registered
[   10.499100] NET: Registered protocol family 1
[   10.499123] Using IPI No-Shortcut mode
[   10.499312]   Magic number: 12:249:606
[   10.499360]   hash matches device ptyad
[   10.499611] Freeing unused kernel memory: 364k freed
[   10.575135] input: AT Translated Set 2 keyboard as /class/input/input1
[   11.681101] AppArmor: AppArmor initialized<5>audit(1203896030.588:2):  type=1505 info="AppArmor initialized" pid=1211
[   11.689005] fuse init (API version 7.8)
[   11.692858] Failure registering capabilities with primary security module.
[   11.707806] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[   11.707820] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[   12.089360] usbcore: registered new interface driver usbfs
[   12.089382] usbcore: registered new interface driver hub
[   12.089399] usbcore: registered new device driver usb
[   12.090122] USB Universal Host Controller Interface driver v3.0
[   12.090188] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[   12.090198] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   12.090202] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   12.090372] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   12.090403] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001800
[   12.090502] usb usb1: configuration #1 chosen from 1 choice
[   12.090530] hub 1-0:1.0: USB hub found
[   12.090535] hub 1-0:1.0: 2 ports detected
[   12.191613] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
[   12.191625] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   12.191630] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   12.191651] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   12.191683] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001820
[   12.191778] usb usb2: configuration #1 chosen from 1 choice
[   12.191802] hub 2-0:1.0: USB hub found
[   12.191807] hub 2-0:1.0: 2 ports detected
[   12.258362] SCSI subsystem initialized
[   12.263408] libata version 2.21 loaded.
[   12.284991] 8139too Fast Ethernet driver 0.9.28
[   12.295597] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21
[   12.295609] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   12.295613] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   12.295635] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   12.295668] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001840
[   12.295759] usb usb3: configuration #1 chosen from 1 choice
[   12.295787] hub 3-0:1.0: USB hub found
[   12.295793] hub 3-0:1.0: 2 ports detected
[   12.399530] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[   12.399543] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   12.399547] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   12.399571] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   12.399605] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[   12.399702] usb usb4: configuration #1 chosen from 1 choice
[   12.399727] hub 4-0:1.0: USB hub found
[   12.399732] hub 4-0:1.0: 2 ports detected
[   12.503660] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[   12.503673] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   12.503677] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   12.503700] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   12.503733] ehci_hcd 0000:00:1d.7: debug port 1
[   12.503740] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   12.503746] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xb8000000
[   12.507625] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   12.507701] usb usb5: configuration #1 chosen from 1 choice
[   12.507730] hub 5-0:1.0: USB hub found
[   12.507736] hub 5-0:1.0: 8 ports detected
[    3.772000] Marking TSC unstable due to: possible TSC halt in C2.
[    3.776000] Time: acpi_pm clocksource has been installed.
[    3.824000] ACPI: PCI Interrupt 0000:06:04.2[C] -> GSI 18 (level, low) -> IRQ 21
[    3.872000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[c4006800-c4006fff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    3.888000] ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 21 (level, low) -> IRQ 22
[    3.888000] eth0: RealTek RTL8139 at 0xf8850000, 00:0f:b0:a6:82:51, IRQ 22
[    3.888000] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[    3.888000] ata_piix 0000:00:1f.1: version 2.11
[    3.888000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 21
[    3.888000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[    3.888000] scsi0 : ata_piix
[    3.888000] scsi1 : ata_piix
[    3.888000] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118c0 irq 14
[    3.888000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118c8 irq 15
[    3.892000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    4.116000] Clocksource tsc unstable (delta = -145875742 ns)
[    4.208000] ata1.00: ATAPI: MATSHITADVD-RAM UJ-841S, 1.50, max UDMA/33
[    4.380000] ata1.00: configured for UDMA/33
[    4.380000] ata2: port disabled. ignoring.
[    4.380000] scsi 0:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-841S  1.50 PQ: 0 ANSI: 5
[    4.380000] ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ]
[    4.380000] ata_piix 0000:00:1f.2: invalid MAP value 0
[    4.380000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
[    4.380000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    4.380000] scsi2 : ata_piix
[    4.380000] scsi3 : ata_piix
[    4.380000] ata3: SATA max UDMA/133 cmd 0x00012088 ctl 0x000118ee bmdma 0x000118f0 irq 20
[    4.380000] ata4: SATA max UDMA/133 cmd 0x00012080 ctl 0x000118ea bmdma 0x000118f8 irq 20
[    4.544000] ata3.00: ATA-6: TOSHIBA MK1032GSX, AS021G, max UDMA/100
[    4.544000] ata3.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    4.552000] ata3.00: configured for UDMA/100
[    4.716000] scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA MK1032GS AS02 PQ: 0 ANSI: 5
[    4.736000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.736000] Uniform CD-ROM driver Revision: 3.20
[    4.736000] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    4.740000] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    4.740000] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    4.752000] sd 2:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[    4.752000] sd 2:0:0:0: [sda] Write Protect is off
[    4.752000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.752000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.752000] sd 2:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[    4.752000] sd 2:0:0:0: [sda] Write Protect is off
[    4.752000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.752000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.752000]  sda: sda1 sda2 sda3 < sda5 > sda4
[    4.812000] sd 2:0:0:0: [sda] Attached SCSI disk
[    5.072000] Attempting manual resume
[    5.072000] swsusp: Resume From Partition 8:5
[    5.072000] PM: Checking swsusp image.
[    5.072000] PM: Resume from disk failed.
[    5.104000] kjournald starting.  Commit interval 5 seconds
[    5.104000] EXT3-fs: mounted filesystem with ordered data mode.
[    5.144000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023f5b8140d86b]
[   15.560000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   15.616000] Netfilter messages via NETLINK v0.30.
[   15.632000] nf_conntrack version 0.5.0 (8183 buckets, 65464 max)
[   17.236000] Linux agpgart interface v0.102 (c) Dave Jones
[   17.248000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   17.296000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   17.536000] iTCO_vendor_support: vendor-support=0
[   17.560000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[   17.560000] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[   17.560000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   17.576000] intel_rng: FWH not detected
[   17.688000] ieee80211_crypt: registered algorithm 'NULL'
[   17.928000] Yenta: CardBus bridge found at 0000:06:04.0 [1179:ff00]
[   17.928000] Yenta: Enabling burst memory read transactions
[   17.928000] Yenta: Using CSCINT to route CSC interrupts to PCI
[   17.928000] Yenta: Routing CardBus interrupts to PCI
[   17.928000] Yenta TI: socket 0000:06:04.0, mfunc 0x10aa1b22, devctl 0x66
[   18.052000] sdhci: Secure Digital Host Controller Interface driver
[   18.052000] sdhci: Copyright(c) Pierre Ossman
[   18.160000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
[   18.160000] Socket status: 30000006
[   18.160000] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[   18.160000] pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
[   18.160000] cs: IO port probe 0x6000-0x6fff: clean.
[   18.160000] pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xc40fffff
[   18.160000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[   18.164000] sdhci: SDHCI controller found at 0000:06:04.4 [104c:8034] (rev 0)
[   18.164000] ACPI: PCI Interrupt 0000:06:04.4[D] -> GSI 19 (level, low) -> IRQ 20
[   18.164000] mmc0: SDHCI at 0xc4009400 irq 20 DMA
[   18.164000] mmc1: SDHCI at 0xc4009000 irq 20 DMA
[   18.164000] mmc2: SDHCI at 0xc4006400 irq 20 DMA
[   18.168000] ACPI: PCI Interrupt 0000:06:04.3[B] -> GSI 17 (level, low) -> IRQ 17
[   18.168000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   18.168000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   18.276000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq
[   18.276000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[   18.276000] ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 22 (level, low) -> IRQ 23
[   18.276000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[   18.920000] input: PS/2 Mouse as /class/input/input2
[   18.932000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
[   19.332000] ipw2200: Radio Frequency Kill Switch is On:
[   19.332000] Kill switch must be turned off for wireless networking to work.
[   19.332000] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[   19.332000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 17
[   19.332000] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[   19.388000] cs: IO port probe 0x100-0x3af: clean.
[   19.392000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   19.392000] cs: IO port probe 0x820-0x8ff: clean.
[   19.392000] cs: IO port probe 0xc00-0xcf7: clean.
[   19.392000] cs: IO port probe 0xa00-0xaff: clean.
[   20.160000] intel8x0_measure_ac97_clock: measured 55329 usecs
[   20.160000] intel8x0: clocking to 48000
[   21.284000] Adding 626492k swap on /dev/sda5.  Priority:-1 extents:1 across:626492k
[   21.672000] EXT3 FS on sda2, internal journal
[   23.480000] ACPI: AC Adapter [ACAD] (on-line)
[   23.496000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   23.496000] ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
[   23.512000] No dock devices found.
[   23.544000] ACPI: Battery Slot [BAT1] (battery present)
[   23.672000] input: Power Button (FF) as /class/input/input4
[   23.676000] ACPI: Power Button (FF) [PWRF]
[   23.720000] input: Lid Switch as /class/input/input5
[   23.724000] ACPI: Lid Switch [LID0]
[   23.768000] input: Power Button (CM) as /class/input/input6
[   23.768000] ACPI: Power Button (CM) [PWRB]
[   25.956000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[   27.648000] lp: driver loaded but no devices found
[   27.696000] ppdev: user-space parallel port driver
[   28.764000] audit(1203892457.156:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4968 profile="/usr/sbin/cupsd"
[   29.056000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   29.056000] apm: overridden by ACPI.
[   32.196000] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   32.196000] vboxdrv: Successfully done.
[   37.496000] NET: Registered protocol family 17
[   43.472000] NET: Registered protocol family 10
[   43.472000] lo: Disabled Privacy Extensions
[   43.472000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   53.708000] eth0: no IPv6 routers present
[  141.664000] eth0: link down
[  145.004000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[  145.008000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  151.712000] eth0: link down
[  154.084000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[  154.088000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  164.328000] eth0: no IPv6 routers present
[  185.636000] eth0: no IPv6 routers present
[  355.136000] Inbound IN=eth0 OUT= MAC=00:0f:b0:a6:82:51:00:1c:f0:9c:d1:33:08:00 SRC=83.181.160.118 DST=83.181.251.194 LEN=48 TOS=0x00 PREC=0x00 TTL=121 ID=54481 PROTO=TCP SPT=18295 DPT=135 WINDOW=64240 RES=0x00 SYN URGP=0 
massi@massi-laptop:~$ 

[dj_def]

La cosa veramente strana è che fglrx non viene proprio caricato... per diagnosticare il motivo potresti avviare in modalità utente singolo (quella senza interfaccia grafica) e provare un sudo modprobe fglrx e poi vedere in dmesg il messaggio che esce fuori.

[demish]

eheh peccato che poi non ci capirei niente del dmesg.
EDIT:
allora dando sudo modprobe fglrx sia in modalità normale che in modalità sicura mi dà un errore FATAL: ecc...
poi ho provato ad avviare in modalità normale ma non l'ultimo kernel ma il penultimo (il 2.20) e la situazione è questa:


inoltra sempre con il penultimo kernel dando il comando sudo modprobe fglrx non mi dà l'errore di prima.

Ciao  e  grazie per la pazienza

[dj_def]

quindi il problema sta proprio nel modulo... prova un pò seguento questa guida: http://lucamarchi.wordpress.com/2007/12 ... rto-aiglx/ (naturalmente devi sostituire la versione 8.42.3 con la 8.40 e devi far attenzione a non abilitare il composite). In poche parole la guida ti fa costruire un pacchetto .deb a partire dall'installer ati (così facendo puoi essere sicuro che il modulo che verrà costruito sarà conforme al kernel attualmente in uso e non dovrebbe più dirti FATAL...)

[demish]

che dici se seguo questo wiki?
http://wiki.ubuntu-it.org/Hardware/Vide ... uoviDriver

provo ad installare gli ultimissimi driver manualmente?

[dj_def]

Da 8.42 in poi non è cambiato più niente di grosso, installa quelli che vuoi ma l'importante è che venga ricostruito il modulo fglrx altrimenti non ti funziona niente.

[demish]

niente, anche il wiki mi si blocca a questo comando:
sudo m-a build fglrx

[dj_def]

posta il build log file e inoltre assicurati di avere installati i sorgenti del kernel in uso

[demish]

cioè tradotto in codici?

[dj_def]

cioè tradotto in codici?

nella schermata che hai postato c'è un'opzione che ti mostra quel file di log... credo che il file si trovi in /usr/share/ati (ma non ne sono affatto sicuro) e mi interessava sapere cosa ci fosse scritto.

Per i sorgenti basta che apri synaptic e selezioni il kernel source col numero di versione che stai usando.

[demish]

allora il file log non è niente di che, si trova in var/cache/modass
ed è:
Build log starting, file: /var/cache/modass/fglrx-kernel-source.buildlog.2.6.22-14-generic.1204049491
Date: Tue, 26 Feb 2008 19:11:31 +0100


invece per quanto riguarda il kernel source se ti riferisci a fglrx-kernel-source sì ce l'ho, se invece ti riferisci a linux-kernel-devel no quello non ce l'ho.

Inoltre dopo aver seguito quei primi passi del wiki, anche il fglrxinfo è cambiato:
massi@massi-laptop:~$ fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: DRI R300 Project
OpenGL renderer string: Mesa DRI R300 20060815 x86/MMX/SSE2 TCL
OpenGL version string: 1.3 Mesa 7.0.1

Segmentation fault (core dumped)

[dj_def]

ad occhio e croce direi che sei con l'accelerazione del driver open source... senza un log che dica qual è il problema però non so davvero cosa consigliarti... a questo punto potresti giocarti il tutto per tutto provando a lanciare l'installer (ma non credo che funzioni).

[demish]

il log in pratica sono quelle 2 righe che a quanto pare non dicono granchè

[demish]

oddio non so come sia possibile, in pratica seguendo la guida fino al punto in cui mi sono bloccato e modificando il file xorg.conf sembra che si sia sistemato.


Boh.
Secondo me però gli fglrx senza aiglx (cioè quelli restricted manager) non me li fa mettere.

[dj_def]

Ma che modifica hai fatto allo xorg.conf? A me sembrava già giusto l'ultima volta che l'hai postato.

PS. Ma se questi funzionano a che pro mettere quelli più vecchi?

[kapello]

Secondo me però gli fglrx senza aiglx (cioè quelli restricted manager) non me li fa mettere.

Cosa vuoi dire? AIGLX è un modulo di X "non supportato" dai driver ATI (forse gli ultimi lo supportano ma malissimo)
vedi http://it.wikipedia.org/wiki/AIGLX

Il restricted manager è un programma di ubuntu per la gestione automatica dei moduli proprietari, tra cui i driver ATI, che però sono gli stessi che si installano con ENVY o manualmente, cambia solo la versione, che per il restricted di solito non è l'ultimissima disponibile ...

[demish]

@kapello: si infatti intendevo che forse la versione vecchia (quella che sta su restricted) non me la fa installare

@dj_def: la modifica su xorg era cambiare "ati" con "fglrx" poichè quando stavo seguendo il wiki stavo utillizzando i driver open (visto che quelli closed c'erano ma non partivano).

A che pro mettere quelli vecchi?
Perchè quelli vecchi + Xgl sono più performanti di questi con Aiglx, infatti con questi è quasi impossibile giocare a frets on fire.

[dj_def]

Ma guarda che xgl lo puoi installare anche con quelli nuovi eh?
Le performance inoltre dovrebbero essere molto migliori con quelli nuovi... se sono scarse prova a disabilitare AIGLX.

[demish]

ecco forse cosa è che fa calare le prestazioni dei giochi 3d: AIglx.
c'è un modo semplice per disabilitarlo senza riavviare?