[Video] Problemi con webcam integrata....HELP ME!!!
[Video] Problemi con webcam integrata....HELP ME!!!
Salve a tutti!!!...ho un problemino con la webcam integrata del mio pc...il mio pc è un packard bell easynote mx45006...praticamente dopo aver installato cheese e una volta fatto partire ho notato che dalla mia web nn s vedeva niente...grigiore assoluto, come se nn fosse connessa...ho letto alcuni topic e ho provato a dare il comando lsusb per vedere quali e quante periferiche attive c sono,ma niente da fare...sembra nn la riveli neanche come se nn fosse accesa...finora nn me ne sono mai accorto in quanto nn l'ho mai usata...qualcuno a suggerimenti?
-
VonNeumann
- Prode Principiante
- Messaggi: 80
- Iscrizione: mercoledì 7 giugno 2006, 19:01
- Località: Ancona
Re: [Video] Problemi con webcam integrata....HELP ME!!!
inzia intanto col verificare se viene riconosciuta... dai un dmesg e vedi che ti viene fuori...potrebbe essere un problema di driver, in tal caso solo conoscendo il modello della webcam si può stabilire come procedere...
«La verità è una cosa troppo complicata perchè permetta qualcosa di differente dalle approssimazioni.»
Re: [Video] Problemi con webcam integrata....HELP ME!!!
Per curiosita, questo comando di fa conoscere ttt le specifiche del pc?
Re: [Video] Problemi con webcam integrata....HELP ME!!!
Nn riesco a trovare nulla che m dica quale modello/driver monto...t posto qui il risultato della ricerca...se puoi darmi una mano nel trovare cio che m serve te ne sarei davvero grato... 
[ 11.303312] Calibrating delay using timer specific routine.. 3462.15 BogoMIPS (lpj=6924305)
[ 11.303335] Security Framework v1.0.0 initialized
[ 11.303343] SELinux: Disabled at boot.
[ 11.303357] Mount-cache hash table entries: 512
[ 11.303474] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[ 11.303483] monitor/mwait feature present.
[ 11.303485] using mwait in idle threads.
[ 11.303489] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 11.303492] CPU: L2 cache: 2048K
[ 11.303494] CPU: Physical Processor ID: 0
[ 11.303496] CPU: Processor Core ID: 0
[ 11.303498] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000
[ 11.303507] Compat vDSO mapped to ffffe000.
[ 11.303520] Checking 'hlt' instruction... OK.
[ 11.319413] SMP alternatives: switching to UP code
[ 11.319842] Early unpacking initramfs... done
[ 11.656543] ACPI: Core revision 20070126
[ 11.656620] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 11.676516] CPU0: Intel Genuine Intel(R) CPU T2250 @ 1.73GHz stepping 08
[ 11.676535] SMP alternatives: switching to SMP code
[ 11.676659] Booting processor 1/1 eip 3000
[ 11.686912] Initializing CPU#1
[ 11.767142] Calibrating delay using timer specific routine.. 3458.30 BogoMIPS (lpj=6916616)
[ 11.767149] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[ 11.767154] monitor/mwait feature present.
[ 11.767157] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 11.767159] CPU: L2 cache: 2048K
[ 11.767162] CPU: Physical Processor ID: 0
[ 11.767163] CPU: Processor Core ID: 1
[ 11.767165] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000
[ 11.767718] CPU1: Intel Genuine Intel(R) CPU T2250 @ 1.73GHz stepping 08
[ 11.767741] Total of 2 processors activated (6920.46 BogoMIPS).
[ 11.767940] ENABLING IO-APIC IRQs
[ 11.768145] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 11.915198] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 11.935210] Brought up 2 CPUs
[ 12.000599] migration_cost=47
[ 12.000745] Booting paravirtualized kernel on bare hardware
[ 12.000822] Time: 10:03:59 Date: 01/24/108
[ 12.000844] NET: Registered protocol family 16
[ 12.000935] EISA bus registered
[ 12.000939] ACPI: bus type pci registered
[ 12.001137] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[ 12.001140] PCI: Using configuration type 1
[ 12.001142] Setting up standard PCI resources
[ 12.004774] ACPI: EC: Look up EC in DSDT
[ 12.005292] ACPI: EC: GPE=0x1c, ports=0x66, 0x62
[ 12.009862] APIC error on CPU1: 00(40)
[ 12.056622] ACPI: Interpreter enabled
[ 12.056625] ACPI: (supports S0 S3 S4 S5)
[ 12.056646] ACPI: Using IOAPIC for interrupt routing
[ 12.064530] ACPI: EC: GPE=0x1c, ports=0x66, 0x62
[ 12.064661] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 12.064674] PCI: Probing PCI hardware (bus 00)
[ 12.065402] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 12.065407] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 12.066376] PCI: Transparent bridge - 0000:00:1e.0
[ 12.066440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 12.066635] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 12.066744] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 12.066859] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 12.078359] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
[ 12.078509] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 12)
[ 12.078657] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 12)
[ 12.078805] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 12)
[ 12.078952] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 12.079127] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 12)
[ 12.079275] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 12)
[ 12.079422] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 12)
[ 12.079543] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 12.079554] pnp: PnP ACPI init
[ 12.079561] ACPI: bus type pnp registered
[ 12.081520] pnp: PnP ACPI: found 12 devices
[ 12.081523] ACPI: ACPI bus type pnp unregistered
[ 12.081527] PnPBIOS: Disabled by ACPI PNP
[ 12.081572] PCI: Using ACPI for IRQ routing
[ 12.081575] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 12.095808] NET: Registered protocol family 8
[ 12.095810] NET: Registered protocol family 20
[ 12.095862] pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 12.095871] pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 12.095874] pnp: 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 12.095877] pnp: 00:08: iomem range 0xfed45000-0xfed89fff has been reserved
[ 12.095880] pnp: 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 12.095885] pnp: 00:09: ioport range 0x400-0x41f has been reserved
[ 12.095888] pnp: 00:09: ioport range 0x250-0x25f has been reserved
[ 12.095891] pnp: 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[ 12.095895] pnp: 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 12.095898] pnp: 00:09: iomem range 0xfec18000-0xfec1ffff has been reserved
[ 12.095901] pnp: 00:09: iomem range 0xfec20000-0xfec27fff has been reserved
[ 12.095906] pnp: 00:0a: iomem range 0xe0000000-0xe3ffffff has been reserved
[ 12.095911] pnp: 00:0b: iomem range 0x0-0x9ffff could not be reserved
[ 12.095914] pnp: 00:0b: iomem range 0xc0000-0xcffff could not be reserved
[ 12.095917] pnp: 00:0b: iomem range 0xe0000-0xfffff could not be reserved
[ 12.095921] pnp: 00:0b: iomem range 0x100000-0x3f7fffff could not be reserved
[ 12.099043] Time: tsc clocksource has been installed.
[ 12.126210] PCI: Bridge: 0000:00:1c.0
[ 12.126211] IO window: disabled.
[ 12.126217] MEM window: disabled.
[ 12.126222] PREFETCH window: disabled.
[ 12.126228] PCI: Bridge: 0000:00:1c.1
[ 12.126230] IO window: disabled.
[ 12.126236] MEM window: ff200000-ff2fffff
[ 12.126240] PREFETCH window: disabled.
[ 12.126247] PCI: Bridge: 0000:00:1e.0
[ 12.126250] IO window: d000-dfff
[ 12.126256] MEM window: ff300000-ff3fffff
[ 12.126261] PREFETCH window: disabled.
[ 12.126291] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 12.126298] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 12.126322] ACPI: PCI Interrupt 0000:00:1c.1 -> GSI 17 (level, low) -> IRQ 17
[ 12.126328] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 12.126343] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 12.126355] NET: Registered protocol family 2
[ 12.163047] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 12.163112] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 12.164167] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 12.164549] TCP: Hash tables configured (established 131072 bind 65536)
[ 12.164552] TCP reno registered
[ 12.175163] checking if image is initramfs... it is
[ 12.622976] Switched to high resolution mode on CPU 1
[ 12.626856] Switched to high resolution mode on CPU 0
[ 12.842898] Freeing initrd memory: 7048k freed
[ 12.843017] Simple Boot Flag at 0x52 set to 0x1
[ 12.843530] audit: initializing netlink socket (disabled)
[ 12.843546] audit(1203847440.208:1): initialized
[ 12.843644] highmem bounce pool size: 64 pages
[ 12.845698] VFS: Disk quotas dquot_6.5.1
[ 12.845747] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 12.845839] io scheduler noop registered
[ 12.845841] io scheduler anticipatory registered
[ 12.845844] io scheduler deadline registered
[ 12.845858] io scheduler cfq registered (default)
[ 12.845874] Boot video device is 0000:00:02.0
[ 12.846046] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 12.846105] assign_interrupt_mode Found MSI capability
[ 12.846108] Allocate Port Service[0000:00:1c.0:pcie00]
[ 12.846147] Allocate Port Service[0000:00:1c.0:pcie02]
[ 12.846249] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 12.846307] assign_interrupt_mode Found MSI capability
[ 12.846310] Allocate Port Service[0000:00:1c.1:pcie00]
[ 12.846343] Allocate Port Service[0000:00:1c.1:pcie02]
[ 12.846507] isapnp: Scanning for PnP cards...
[ 13.200275] isapnp: No Plug & Play device found
[ 13.224132] Real Time Clock Driver v1.12ac
[ 13.224253] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 13.225409] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 13.225539] input: Macintosh mouse button emulation as /class/input/input0
[ 13.225624] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 13.227744] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 13.228922] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 13.228927] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 13.228931] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 13.228934] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 13.228936] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 13.229085] mice: PS/2 mouse device common for all mice
[ 13.229214] EISA: Probing bus 0 at eisa.0
[ 13.229258] EISA: Detected 0 cards.
[ 13.229351] TCP cubic registered
[ 13.229368] NET: Registered protocol family 1
[ 13.229390] Using IPI No-Shortcut mode
[ 13.229571] Magic number: 12:350:73
[ 13.229918] Freeing unused kernel memory: 364k freed
[ 13.266587] input: AT Translated Set 2 keyboard as /class/input/input1
[ 14.437938] AppArmor: AppArmor initializedaudit(1203847441.708:2): type=1505 info="AppArmor initialized" pid=1226
[ 14.445986] fuse init (API version 7.
[ 14.451401] Failure registering capabilities with primary security module.
[ 14.474846] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 5F, should be 24 [20070126]
[ 14.474854] ACPI: SSDT 3F7D7AC0, 0382 (r1 AMI CPU1PM 1 INTL 2002026)
[ 14.475198] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 14.475202] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 14.475251] ACPI Warning (tbutils-0217): Incorrect checksum in table [SSDT] - 10, should be 6C [20070126]
[ 14.475256] ACPI: SSDT 3F7D7E50, 0382 (r1 AMI CPU2PM 1 INTL 2002026)
[ 14.475556] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 14.475560] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 3.088000] Marking TSC unstable due to: possible TSC halt in C2.
[ 3.092000] Time: acpi_pm clocksource has been installed.
[ 3.092000] ACPI: Thermal Zone [THRM] (25 C)
[ 3.548000] usbcore: registered new interface driver usbfs
[ 3.552000] usbcore: registered new interface driver hub
[ 3.552000] usbcore: registered new device driver usb
[ 3.552000] USB Universal Host Controller Interface driver v3.0
[ 3.552000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
[ 3.552000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.552000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.552000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 3.552000] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000e880
[ 3.552000] usb usb1: configuration #1 chosen from 1 choice
[ 3.552000] hub 1-0:1.0: USB hub found
[ 3.552000] hub 1-0:1.0: 2 ports detected
[ 3.588000] SCSI subsystem initialized
[ 3.596000] libata version 2.21 loaded.
[ 3.624000] 8139too Fast Ethernet driver 0.9.28
[ 3.656000] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 19
[ 3.656000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.656000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.656000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 3.656000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800
[ 3.656000] usb usb2: configuration #1 chosen from 1 choice
[ 3.656000] hub 2-0:1.0: USB hub found
[ 3.656000] hub 2-0:1.0: 2 ports detected
[ 3.760000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 3.760000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.760000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.760000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 3.760000] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000e480
[ 3.760000] usb usb3: configuration #1 chosen from 1 choice
[ 3.760000] hub 3-0:1.0: USB hub found
[ 3.760000] hub 3-0:1.0: 2 ports detected
[ 3.864000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 21
[ 3.864000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.864000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.864000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 3.864000] uhci_hcd 0000:00:1d.3: irq 21, io base 0x0000e400
[ 3.864000] usb usb4: configuration #1 chosen from 1 choice
[ 3.864000] hub 4-0:1.0: USB hub found
[ 3.864000] hub 4-0:1.0: 2 ports detected
[ 3.968000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
[ 3.968000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.968000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.968000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 3.968000] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.968000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 3.968000] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xff63bc00
[ 4.000000] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 4.000000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.000000] usb usb5: configuration #1 chosen from 1 choice
[ 4.000000] hub 5-0:1.0: USB hub found
[ 4.000000] hub 5-0:1.0: 8 ports detected
[ 4.104000] ata_piix 0000:00:1f.1: version 2.11
[ 4.104000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20
[ 4.104000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 4.104000] scsi0 : ata_piix
[ 4.104000] scsi1 : ata_piix
[ 4.104000] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
[ 4.104000] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
[ 4.572000] ata1.00: ATA-6: ST9100828A, 3.ALA, max UDMA/100
[ 4.572000] ata1.00: 195371568 sectors, multi 16: LBA48
[ 4.572000] ata1.01: ATAPI: Slimtype DVDRW SOSW-833S, V9S2, max UDMA/33
[ 4.588000] ata1.00: configured for UDMA/100
[ 4.616000] usb 5-5: new high speed USB device using ehci_hcd and address 3
[ 4.756000] usb 5-5: configuration #1 chosen from 1 choice
[ 4.760000] ata1.01: configured for UDMA/33
[ 4.760000] ata2: port disabled. ignoring.
[ 4.764000] scsi 0:0:0:0: Direct-Access ATA ST9100828A 3.AL PQ: 0 ANSI: 5
[ 4.764000] scsi 0:0:1:0: CD-ROM Slimtype DVDRW SOSW-833S V9S2 PQ: 0 ANSI: 5
[ 4.764000] ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 4.768000] eth0: RealTek RTL8139 at 0xf8868c00, 00:18:f3:32:34:93, IRQ 16
[ 4.768000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 4.768000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 4.776000] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[ 4.776000] sd 0:0:0:0: [sda] Write Protect is off
[ 4.776000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.776000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.776000] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[ 4.776000] sd 0:0:0:0: [sda] Write Protect is off
[ 4.776000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.776000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.776000] sda: sda1 sda2 sda3
[ 4.820000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.824000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.824000] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 4.828000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 4.828000] Uniform CD-ROM driver Revision: 3.20
[ 4.828000] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 4.996000] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 5.140000] Attempting manual resume
[ 5.140000] swsusp: Resume From Partition 8:3
[ 5.140000] PM: Checking swsusp image.
[ 5.140000] PM: Resume from disk failed.
[ 5.172000] usb 2-2: configuration #1 chosen from 1 choice
[ 5.180000] kjournald starting. Commit interval 5 seconds
[ 5.180000] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.184000] usbcore: registered new interface driver hiddev
[ 5.196000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
[ 5.196000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2
[ 5.196000] usbcore: registered new interface driver usbhid
[ 5.196000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 11.880000] eth0: link down
[ 12.768000] NET: Registered protocol family 10
[ 12.768000] lo: Disabled Privacy Extensions
[ 12.768000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.908000] intel_rng: FWH not detected
[ 12.920000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.924000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.968000] iTCO_vendor_support: vendor-support=0
[ 12.968000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 12.968000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0860)
[ 12.968000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.052000] Linux agpgart interface v0.102 (c) Dave Jones
[ 13.196000] agpgart: Detected an Intel 945GM Chipset.
[ 13.196000] agpgart: Detected 7932K stolen memory.
[ 13.212000] agpgart: AGP aperture is 256M @ 0xd0000000
[ 13.284000] input: PC Speaker as /class/input/input3
[ 13.364000] sdhci: Secure Digital Host Controller Interface driver
[ 13.364000] sdhci: Copyright(c) Pierre Ossman
[ 13.364000] sdhci: SDHCI controller found at 0000:03:01.0 [1180:0822] (rev 19)
[ 13.364000] ACPI: PCI Interrupt 0000:03:01.0 -> GSI 18 (level, low) -> IRQ 20
[ 13.364000] mmc0: SDHCI at 0xff3ffc00 irq 20 DMA
[ 13.516000] ieee80211_crypt: registered algorithm 'NULL'
[ 13.524000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 13.524000] ieee80211: Copyright (C) 2004-2005 Intel Corporation
[ 13.600000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1
[ 13.600000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 13.600000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 13.600000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 13.600000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 13.804000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 22
[ 13.804000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 13.808000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x3aa0b4, caps: 0xa04713/0x200000
[ 13.848000] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[ 14.804000] lp: driver loaded but no devices found
[ 14.844000] Adding 1951888k swap on /dev/sda3. Priority:-1 extents:1 across:1951888k
[ 15.256000] EXT3 FS on sda2, internal journal
[ 15.472000] ipw3945: Radio Frequency Kill Switch is On:
[ 15.472000] Kill switch must be turned off for wireless networking to work.
[ 16.860000] PPP generic driver version 2.4.2
[ 16.892000] NET: Registered protocol family 17
[ 17.152000] ACPI: Battery Slot [BAT0] (battery absent)
[ 17.316000] ACPI: AC Adapter [AC0] (on-line)
[ 17.344000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 17.360000] input: Power Button (FF) as /class/input/input5
[ 17.360000] ACPI: Power Button (FF) [PWRF]
[ 17.360000] input: Lid Switch as /class/input/input6
[ 17.360000] ACPI: Lid Switch [liD]
[ 17.360000] input: Power Button (CM) as /class/input/input7
[ 17.360000] ACPI: Power Button (CM) [PWRB]
[ 17.360000] input: Sleep Button (CM) as /class/input/input8
[ 17.360000] ACPI: Sleep Button (CM) [SLPB]
[ 17.432000] No dock devices found.
[ 17.512000] Asus Laptop ACPI Extras version 0.30
[ 17.516000] unsupported model T12F, trying default values
[ 17.516000] send /proc/acpi/dsdt to the developers
[ 18.712000] ppdev: user-space parallel port driver
[ 18.952000] audit(1203843857.924:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4907 profile="/usr/sbin/cupsd"
[ 19.012000] apm: BIOS not found.
[ 19.304000] Failure registering capabilities with primary security module.
[ 19.528000] Bluetooth: Core ver 2.11
[ 19.528000] NET: Registered protocol family 31
[ 19.528000] Bluetooth: HCI device and connection manager initialized
[ 19.528000] Bluetooth: HCI socket layer initialized
[ 19.548000] Bluetooth: L2CAP ver 2.8
[ 19.548000] Bluetooth: L2CAP socket layer initialized
[ 19.624000] Bluetooth: RFCOMM socket layer initialized
[ 19.624000] Bluetooth: RFCOMM TTY layer initialized
[ 19.624000] Bluetooth: RFCOMM ver 1.8
[ 24.452000] [drm] Initialized drm 1.1.0 20060810
[ 24.452000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 24.452000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 352.932000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 352.936000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 363.472000] eth0: no IPv6 routers present
[ 407.424000] NET: Registered protocol family 24
[ 408.960000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 480.432000] usb 5-2: new high speed USB device using ehci_hcd and address 4
[ 480.564000] usb 5-2: configuration #1 chosen from 1 choice
[ 480.660000] usbcore: registered new interface driver libusual
[ 480.708000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 480.708000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 480.716000] Initializing USB Mass Storage driver...
[ 480.716000] scsi2 : SCSI emulation for USB Mass Storage devices
[ 480.716000] usb-storage: device found at 4
[ 480.716000] usb-storage: waiting for device to settle before scanning
[ 480.716000] usbcore: registered new interface driver usb-storage
[ 480.716000] USB Mass Storage support registered.
[ 485.716000] usb-storage: device scan complete
[ 485.716000] scsi 2:0:0:0: Direct-Access Samsung YP-U1 0100 PQ: 0 ANSI: 4
[ 485.716000] sd 2:0:0:0: [sdb] 254720 2048-byte hardware sectors (522 MB)
[ 485.716000] sd 2:0:0:0: [sdb] Write Protect is off
[ 485.716000] sd 2:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 485.716000] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 485.720000] sd 2:0:0:0: [sdb] 254720 2048-byte hardware sectors (522 MB)
[ 485.724000] sd 2:0:0:0: [sdb] Write Protect is off
[ 485.724000] sd 2:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 485.724000] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 485.724000] sdb: sdb1
[ 485.724000] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 485.724000] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1320.144000] usb 5-2: USB disconnect, address 4
[ 1320.216000] scsi 2:0:0:0: rejecting I/O to dead device
[ 1320.936000] usb 5-2: new high speed USB device using ehci_hcd and address 5
[ 1321.068000] usb 5-2: configuration #1 chosen from 1 choice
[ 1321.068000] scsi3 : SCSI emulation for USB Mass Storage devices
[ 1321.068000] usb-storage: device found at 5
[ 1321.068000] usb-storage: waiting for device to settle before scanning
[ 1323.316000] usb 5-1: new high speed USB device using ehci_hcd and address 6
[ 1323.448000] usb 5-1: configuration #1 chosen from 1 choice
[ 1323.448000] scsi4 : SCSI emulation for USB Mass Storage devices
[ 1323.448000] usb-storage: device found at 6
[ 1323.448000] usb-storage: waiting for device to settle before scanning
[ 1326.068000] usb-storage: device scan complete
[ 1326.068000] scsi 3:0:0:0: Direct-Access Samsung YP-U1 0100 PQ: 0 ANSI: 4
[ 1326.068000] sd 3:0:0:0: [sdb] 254720 2048-byte hardware sectors (522 MB)
[ 1326.068000] sd 3:0:0:0: [sdb] Write Protect is off
[ 1326.068000] sd 3:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 1326.068000] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 1326.072000] sd 3:0:0:0: [sdb] 254720 2048-byte hardware sectors (522 MB)
[ 1326.072000] sd 3:0:0:0: [sdb] Write Protect is off
[ 1326.072000] sd 3:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 1326.072000] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 1326.072000] sdb: sdb1
[ 1326.076000] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 1326.076000] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1328.448000] usb-storage: device scan complete
[ 1328.448000] scsi 4:0:0:0: Direct-Access Ext Hard Disk PQ: 0 ANSI: 4
[ 1328.448000] sd 4:0:0:0: [sdc] 234441648 512-byte hardware sectors (120034 MB)
[ 1328.448000] sd 4:0:0:0: [sdc] Write Protect is off
[ 1328.448000] sd 4:0:0:0: [sdc] Mode Sense: 10 00 00 00
[ 1328.448000] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 1328.448000] sd 4:0:0:0: [sdc] 234441648 512-byte hardware sectors (120034 MB)
[ 1328.448000] sd 4:0:0:0: [sdc] Write Protect is off
[ 1328.448000] sd 4:0:0:0: [sdc] Mode Sense: 10 00 00 00
[ 1328.448000] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 1328.448000] sdc: sdc1
[ 1328.472000] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 1328.472000] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 1464.780000] usb 5-2: USB disconnect, address 5
[ 1466.564000] usb 5-2: new high speed USB device using ehci_hcd and address 7
[ 1466.696000] usb 5-2: configuration #1 chosen from 1 choice
[ 1466.696000] scsi5 : SCSI emulation for USB Mass Storage devices
[ 1466.696000] usb-storage: device found at 7
[ 1466.696000] usb-storage: waiting for device to settle before scanning
[ 1471.696000] usb-storage: device scan complete
[ 1471.696000] scsi 5:0:0:0: Direct-Access Samsung YP-U1 0100 PQ: 0 ANSI: 4
[ 1471.696000] sd 5:0:0:0: [sdb] 254720 2048-byte hardware sectors (522 MB)
[ 1471.696000] sd 5:0:0:0: [sdb] Write Protect is off
[ 1471.696000] sd 5:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 1471.696000] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 1471.700000] sd 5:0:0:0: [sdb] 254720 2048-byte hardware sectors (522 MB)
[ 1471.700000] sd 5:0:0:0: [sdb] Write Protect is off
[ 1471.700000] sd 5:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 1471.700000] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 1471.700000] sdb: sdb1
[ 1471.704000] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 1471.704000] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 4999.700000] usb 5-1: USB disconnect, address 6
[ 5000.556000] usb 5-2: USB disconnect, address 7
[ 5432.004000] usb 2-2: USB disconnect, address 3
[ 11.303312] Calibrating delay using timer specific routine.. 3462.15 BogoMIPS (lpj=6924305)
[ 11.303335] Security Framework v1.0.0 initialized
[ 11.303343] SELinux: Disabled at boot.
[ 11.303357] Mount-cache hash table entries: 512
[ 11.303474] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[ 11.303483] monitor/mwait feature present.
[ 11.303485] using mwait in idle threads.
[ 11.303489] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 11.303492] CPU: L2 cache: 2048K
[ 11.303494] CPU: Physical Processor ID: 0
[ 11.303496] CPU: Processor Core ID: 0
[ 11.303498] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000
[ 11.303507] Compat vDSO mapped to ffffe000.
[ 11.303520] Checking 'hlt' instruction... OK.
[ 11.319413] SMP alternatives: switching to UP code
[ 11.319842] Early unpacking initramfs... done
[ 11.656543] ACPI: Core revision 20070126
[ 11.656620] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 11.676516] CPU0: Intel Genuine Intel(R) CPU T2250 @ 1.73GHz stepping 08
[ 11.676535] SMP alternatives: switching to SMP code
[ 11.676659] Booting processor 1/1 eip 3000
[ 11.686912] Initializing CPU#1
[ 11.767142] Calibrating delay using timer specific routine.. 3458.30 BogoMIPS (lpj=6916616)
[ 11.767149] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[ 11.767154] monitor/mwait feature present.
[ 11.767157] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 11.767159] CPU: L2 cache: 2048K
[ 11.767162] CPU: Physical Processor ID: 0
[ 11.767163] CPU: Processor Core ID: 1
[ 11.767165] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000
[ 11.767718] CPU1: Intel Genuine Intel(R) CPU T2250 @ 1.73GHz stepping 08
[ 11.767741] Total of 2 processors activated (6920.46 BogoMIPS).
[ 11.767940] ENABLING IO-APIC IRQs
[ 11.768145] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 11.915198] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 11.935210] Brought up 2 CPUs
[ 12.000599] migration_cost=47
[ 12.000745] Booting paravirtualized kernel on bare hardware
[ 12.000822] Time: 10:03:59 Date: 01/24/108
[ 12.000844] NET: Registered protocol family 16
[ 12.000935] EISA bus registered
[ 12.000939] ACPI: bus type pci registered
[ 12.001137] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[ 12.001140] PCI: Using configuration type 1
[ 12.001142] Setting up standard PCI resources
[ 12.004774] ACPI: EC: Look up EC in DSDT
[ 12.005292] ACPI: EC: GPE=0x1c, ports=0x66, 0x62
[ 12.009862] APIC error on CPU1: 00(40)
[ 12.056622] ACPI: Interpreter enabled
[ 12.056625] ACPI: (supports S0 S3 S4 S5)
[ 12.056646] ACPI: Using IOAPIC for interrupt routing
[ 12.064530] ACPI: EC: GPE=0x1c, ports=0x66, 0x62
[ 12.064661] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 12.064674] PCI: Probing PCI hardware (bus 00)
[ 12.065402] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 12.065407] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 12.066376] PCI: Transparent bridge - 0000:00:1e.0
[ 12.066440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 12.066635] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 12.066744] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 12.066859] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 12.078359] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
[ 12.078509] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 12)
[ 12.078657] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 12)
[ 12.078805] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 12)
[ 12.078952] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 12.079127] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 12)
[ 12.079275] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 12)
[ 12.079422] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 12)
[ 12.079543] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 12.079554] pnp: PnP ACPI init
[ 12.079561] ACPI: bus type pnp registered
[ 12.081520] pnp: PnP ACPI: found 12 devices
[ 12.081523] ACPI: ACPI bus type pnp unregistered
[ 12.081527] PnPBIOS: Disabled by ACPI PNP
[ 12.081572] PCI: Using ACPI for IRQ routing
[ 12.081575] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 12.095808] NET: Registered protocol family 8
[ 12.095810] NET: Registered protocol family 20
[ 12.095862] pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 12.095871] pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 12.095874] pnp: 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 12.095877] pnp: 00:08: iomem range 0xfed45000-0xfed89fff has been reserved
[ 12.095880] pnp: 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 12.095885] pnp: 00:09: ioport range 0x400-0x41f has been reserved
[ 12.095888] pnp: 00:09: ioport range 0x250-0x25f has been reserved
[ 12.095891] pnp: 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[ 12.095895] pnp: 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 12.095898] pnp: 00:09: iomem range 0xfec18000-0xfec1ffff has been reserved
[ 12.095901] pnp: 00:09: iomem range 0xfec20000-0xfec27fff has been reserved
[ 12.095906] pnp: 00:0a: iomem range 0xe0000000-0xe3ffffff has been reserved
[ 12.095911] pnp: 00:0b: iomem range 0x0-0x9ffff could not be reserved
[ 12.095914] pnp: 00:0b: iomem range 0xc0000-0xcffff could not be reserved
[ 12.095917] pnp: 00:0b: iomem range 0xe0000-0xfffff could not be reserved
[ 12.095921] pnp: 00:0b: iomem range 0x100000-0x3f7fffff could not be reserved
[ 12.099043] Time: tsc clocksource has been installed.
[ 12.126210] PCI: Bridge: 0000:00:1c.0
[ 12.126211] IO window: disabled.
[ 12.126217] MEM window: disabled.
[ 12.126222] PREFETCH window: disabled.
[ 12.126228] PCI: Bridge: 0000:00:1c.1
[ 12.126230] IO window: disabled.
[ 12.126236] MEM window: ff200000-ff2fffff
[ 12.126240] PREFETCH window: disabled.
[ 12.126247] PCI: Bridge: 0000:00:1e.0
[ 12.126250] IO window: d000-dfff
[ 12.126256] MEM window: ff300000-ff3fffff
[ 12.126261] PREFETCH window: disabled.
[ 12.126291] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 12.126298] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 12.126322] ACPI: PCI Interrupt 0000:00:1c.1 -> GSI 17 (level, low) -> IRQ 17
[ 12.126328] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 12.126343] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 12.126355] NET: Registered protocol family 2
[ 12.163047] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 12.163112] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 12.164167] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 12.164549] TCP: Hash tables configured (established 131072 bind 65536)
[ 12.164552] TCP reno registered
[ 12.175163] checking if image is initramfs... it is
[ 12.622976] Switched to high resolution mode on CPU 1
[ 12.626856] Switched to high resolution mode on CPU 0
[ 12.842898] Freeing initrd memory: 7048k freed
[ 12.843017] Simple Boot Flag at 0x52 set to 0x1
[ 12.843530] audit: initializing netlink socket (disabled)
[ 12.843546] audit(1203847440.208:1): initialized
[ 12.843644] highmem bounce pool size: 64 pages
[ 12.845698] VFS: Disk quotas dquot_6.5.1
[ 12.845747] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 12.845839] io scheduler noop registered
[ 12.845841] io scheduler anticipatory registered
[ 12.845844] io scheduler deadline registered
[ 12.845858] io scheduler cfq registered (default)
[ 12.845874] Boot video device is 0000:00:02.0
[ 12.846046] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 12.846105] assign_interrupt_mode Found MSI capability
[ 12.846108] Allocate Port Service[0000:00:1c.0:pcie00]
[ 12.846147] Allocate Port Service[0000:00:1c.0:pcie02]
[ 12.846249] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 12.846307] assign_interrupt_mode Found MSI capability
[ 12.846310] Allocate Port Service[0000:00:1c.1:pcie00]
[ 12.846343] Allocate Port Service[0000:00:1c.1:pcie02]
[ 12.846507] isapnp: Scanning for PnP cards...
[ 13.200275] isapnp: No Plug & Play device found
[ 13.224132] Real Time Clock Driver v1.12ac
[ 13.224253] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 13.225409] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 13.225539] input: Macintosh mouse button emulation as /class/input/input0
[ 13.225624] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 13.227744] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 13.228922] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 13.228927] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 13.228931] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 13.228934] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 13.228936] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 13.229085] mice: PS/2 mouse device common for all mice
[ 13.229214] EISA: Probing bus 0 at eisa.0
[ 13.229258] EISA: Detected 0 cards.
[ 13.229351] TCP cubic registered
[ 13.229368] NET: Registered protocol family 1
[ 13.229390] Using IPI No-Shortcut mode
[ 13.229571] Magic number: 12:350:73
[ 13.229918] Freeing unused kernel memory: 364k freed
[ 13.266587] input: AT Translated Set 2 keyboard as /class/input/input1
[ 14.437938] AppArmor: AppArmor initializedaudit(1203847441.708:2): type=1505 info="AppArmor initialized" pid=1226
[ 14.445986] fuse init (API version 7.
[ 14.451401] Failure registering capabilities with primary security module.
[ 14.474846] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 5F, should be 24 [20070126]
[ 14.474854] ACPI: SSDT 3F7D7AC0, 0382 (r1 AMI CPU1PM 1 INTL 2002026)
[ 14.475198] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 14.475202] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 14.475251] ACPI Warning (tbutils-0217): Incorrect checksum in table [SSDT] - 10, should be 6C [20070126]
[ 14.475256] ACPI: SSDT 3F7D7E50, 0382 (r1 AMI CPU2PM 1 INTL 2002026)
[ 14.475556] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 14.475560] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 3.088000] Marking TSC unstable due to: possible TSC halt in C2.
[ 3.092000] Time: acpi_pm clocksource has been installed.
[ 3.092000] ACPI: Thermal Zone [THRM] (25 C)
[ 3.548000] usbcore: registered new interface driver usbfs
[ 3.552000] usbcore: registered new interface driver hub
[ 3.552000] usbcore: registered new device driver usb
[ 3.552000] USB Universal Host Controller Interface driver v3.0
[ 3.552000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
[ 3.552000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.552000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.552000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 3.552000] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000e880
[ 3.552000] usb usb1: configuration #1 chosen from 1 choice
[ 3.552000] hub 1-0:1.0: USB hub found
[ 3.552000] hub 1-0:1.0: 2 ports detected
[ 3.588000] SCSI subsystem initialized
[ 3.596000] libata version 2.21 loaded.
[ 3.624000] 8139too Fast Ethernet driver 0.9.28
[ 3.656000] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 19
[ 3.656000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.656000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.656000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 3.656000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800
[ 3.656000] usb usb2: configuration #1 chosen from 1 choice
[ 3.656000] hub 2-0:1.0: USB hub found
[ 3.656000] hub 2-0:1.0: 2 ports detected
[ 3.760000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 3.760000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.760000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.760000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 3.760000] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000e480
[ 3.760000] usb usb3: configuration #1 chosen from 1 choice
[ 3.760000] hub 3-0:1.0: USB hub found
[ 3.760000] hub 3-0:1.0: 2 ports detected
[ 3.864000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 21
[ 3.864000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.864000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.864000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 3.864000] uhci_hcd 0000:00:1d.3: irq 21, io base 0x0000e400
[ 3.864000] usb usb4: configuration #1 chosen from 1 choice
[ 3.864000] hub 4-0:1.0: USB hub found
[ 3.864000] hub 4-0:1.0: 2 ports detected
[ 3.968000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
[ 3.968000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.968000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.968000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 3.968000] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.968000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 3.968000] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xff63bc00
[ 4.000000] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 4.000000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.000000] usb usb5: configuration #1 chosen from 1 choice
[ 4.000000] hub 5-0:1.0: USB hub found
[ 4.000000] hub 5-0:1.0: 8 ports detected
[ 4.104000] ata_piix 0000:00:1f.1: version 2.11
[ 4.104000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20
[ 4.104000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 4.104000] scsi0 : ata_piix
[ 4.104000] scsi1 : ata_piix
[ 4.104000] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
[ 4.104000] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
[ 4.572000] ata1.00: ATA-6: ST9100828A, 3.ALA, max UDMA/100
[ 4.572000] ata1.00: 195371568 sectors, multi 16: LBA48
[ 4.572000] ata1.01: ATAPI: Slimtype DVDRW SOSW-833S, V9S2, max UDMA/33
[ 4.588000] ata1.00: configured for UDMA/100
[ 4.616000] usb 5-5: new high speed USB device using ehci_hcd and address 3
[ 4.756000] usb 5-5: configuration #1 chosen from 1 choice
[ 4.760000] ata1.01: configured for UDMA/33
[ 4.760000] ata2: port disabled. ignoring.
[ 4.764000] scsi 0:0:0:0: Direct-Access ATA ST9100828A 3.AL PQ: 0 ANSI: 5
[ 4.764000] scsi 0:0:1:0: CD-ROM Slimtype DVDRW SOSW-833S V9S2 PQ: 0 ANSI: 5
[ 4.764000] ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 4.768000] eth0: RealTek RTL8139 at 0xf8868c00, 00:18:f3:32:34:93, IRQ 16
[ 4.768000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 4.768000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 4.776000] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[ 4.776000] sd 0:0:0:0: [sda] Write Protect is off
[ 4.776000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.776000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.776000] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[ 4.776000] sd 0:0:0:0: [sda] Write Protect is off
[ 4.776000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.776000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.776000] sda: sda1 sda2 sda3
[ 4.820000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.824000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.824000] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 4.828000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 4.828000] Uniform CD-ROM driver Revision: 3.20
[ 4.828000] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 4.996000] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 5.140000] Attempting manual resume
[ 5.140000] swsusp: Resume From Partition 8:3
[ 5.140000] PM: Checking swsusp image.
[ 5.140000] PM: Resume from disk failed.
[ 5.172000] usb 2-2: configuration #1 chosen from 1 choice
[ 5.180000] kjournald starting. Commit interval 5 seconds
[ 5.180000] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.184000] usbcore: registered new interface driver hiddev
[ 5.196000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
[ 5.196000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2
[ 5.196000] usbcore: registered new interface driver usbhid
[ 5.196000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 11.880000] eth0: link down
[ 12.768000] NET: Registered protocol family 10
[ 12.768000] lo: Disabled Privacy Extensions
[ 12.768000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.908000] intel_rng: FWH not detected
[ 12.920000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.924000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.968000] iTCO_vendor_support: vendor-support=0
[ 12.968000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 12.968000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0860)
[ 12.968000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.052000] Linux agpgart interface v0.102 (c) Dave Jones
[ 13.196000] agpgart: Detected an Intel 945GM Chipset.
[ 13.196000] agpgart: Detected 7932K stolen memory.
[ 13.212000] agpgart: AGP aperture is 256M @ 0xd0000000
[ 13.284000] input: PC Speaker as /class/input/input3
[ 13.364000] sdhci: Secure Digital Host Controller Interface driver
[ 13.364000] sdhci: Copyright(c) Pierre Ossman
[ 13.364000] sdhci: SDHCI controller found at 0000:03:01.0 [1180:0822] (rev 19)
[ 13.364000] ACPI: PCI Interrupt 0000:03:01.0 -> GSI 18 (level, low) -> IRQ 20
[ 13.364000] mmc0: SDHCI at 0xff3ffc00 irq 20 DMA
[ 13.516000] ieee80211_crypt: registered algorithm 'NULL'
[ 13.524000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 13.524000] ieee80211: Copyright (C) 2004-2005 Intel Corporation
[ 13.600000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1
[ 13.600000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 13.600000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 13.600000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 13.600000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 13.804000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 22
[ 13.804000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 13.808000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x3aa0b4, caps: 0xa04713/0x200000
[ 13.848000] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[ 14.804000] lp: driver loaded but no devices found
[ 14.844000] Adding 1951888k swap on /dev/sda3. Priority:-1 extents:1 across:1951888k
[ 15.256000] EXT3 FS on sda2, internal journal
[ 15.472000] ipw3945: Radio Frequency Kill Switch is On:
[ 15.472000] Kill switch must be turned off for wireless networking to work.
[ 16.860000] PPP generic driver version 2.4.2
[ 16.892000] NET: Registered protocol family 17
[ 17.152000] ACPI: Battery Slot [BAT0] (battery absent)
[ 17.316000] ACPI: AC Adapter [AC0] (on-line)
[ 17.344000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 17.360000] input: Power Button (FF) as /class/input/input5
[ 17.360000] ACPI: Power Button (FF) [PWRF]
[ 17.360000] input: Lid Switch as /class/input/input6
[ 17.360000] ACPI: Lid Switch [liD]
[ 17.360000] input: Power Button (CM) as /class/input/input7
[ 17.360000] ACPI: Power Button (CM) [PWRB]
[ 17.360000] input: Sleep Button (CM) as /class/input/input8
[ 17.360000] ACPI: Sleep Button (CM) [SLPB]
[ 17.432000] No dock devices found.
[ 17.512000] Asus Laptop ACPI Extras version 0.30
[ 17.516000] unsupported model T12F, trying default values
[ 17.516000] send /proc/acpi/dsdt to the developers
[ 18.712000] ppdev: user-space parallel port driver
[ 18.952000] audit(1203843857.924:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4907 profile="/usr/sbin/cupsd"
[ 19.012000] apm: BIOS not found.
[ 19.304000] Failure registering capabilities with primary security module.
[ 19.528000] Bluetooth: Core ver 2.11
[ 19.528000] NET: Registered protocol family 31
[ 19.528000] Bluetooth: HCI device and connection manager initialized
[ 19.528000] Bluetooth: HCI socket layer initialized
[ 19.548000] Bluetooth: L2CAP ver 2.8
[ 19.548000] Bluetooth: L2CAP socket layer initialized
[ 19.624000] Bluetooth: RFCOMM socket layer initialized
[ 19.624000] Bluetooth: RFCOMM TTY layer initialized
[ 19.624000] Bluetooth: RFCOMM ver 1.8
[ 24.452000] [drm] Initialized drm 1.1.0 20060810
[ 24.452000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 24.452000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 352.932000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 352.936000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 363.472000] eth0: no IPv6 routers present
[ 407.424000] NET: Registered protocol family 24
[ 408.960000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 480.432000] usb 5-2: new high speed USB device using ehci_hcd and address 4
[ 480.564000] usb 5-2: configuration #1 chosen from 1 choice
[ 480.660000] usbcore: registered new interface driver libusual
[ 480.708000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 480.708000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 480.716000] Initializing USB Mass Storage driver...
[ 480.716000] scsi2 : SCSI emulation for USB Mass Storage devices
[ 480.716000] usb-storage: device found at 4
[ 480.716000] usb-storage: waiting for device to settle before scanning
[ 480.716000] usbcore: registered new interface driver usb-storage
[ 480.716000] USB Mass Storage support registered.
[ 485.716000] usb-storage: device scan complete
[ 485.716000] scsi 2:0:0:0: Direct-Access Samsung YP-U1 0100 PQ: 0 ANSI: 4
[ 485.716000] sd 2:0:0:0: [sdb] 254720 2048-byte hardware sectors (522 MB)
[ 485.716000] sd 2:0:0:0: [sdb] Write Protect is off
[ 485.716000] sd 2:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 485.716000] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 485.720000] sd 2:0:0:0: [sdb] 254720 2048-byte hardware sectors (522 MB)
[ 485.724000] sd 2:0:0:0: [sdb] Write Protect is off
[ 485.724000] sd 2:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 485.724000] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 485.724000] sdb: sdb1
[ 485.724000] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 485.724000] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1320.144000] usb 5-2: USB disconnect, address 4
[ 1320.216000] scsi 2:0:0:0: rejecting I/O to dead device
[ 1320.936000] usb 5-2: new high speed USB device using ehci_hcd and address 5
[ 1321.068000] usb 5-2: configuration #1 chosen from 1 choice
[ 1321.068000] scsi3 : SCSI emulation for USB Mass Storage devices
[ 1321.068000] usb-storage: device found at 5
[ 1321.068000] usb-storage: waiting for device to settle before scanning
[ 1323.316000] usb 5-1: new high speed USB device using ehci_hcd and address 6
[ 1323.448000] usb 5-1: configuration #1 chosen from 1 choice
[ 1323.448000] scsi4 : SCSI emulation for USB Mass Storage devices
[ 1323.448000] usb-storage: device found at 6
[ 1323.448000] usb-storage: waiting for device to settle before scanning
[ 1326.068000] usb-storage: device scan complete
[ 1326.068000] scsi 3:0:0:0: Direct-Access Samsung YP-U1 0100 PQ: 0 ANSI: 4
[ 1326.068000] sd 3:0:0:0: [sdb] 254720 2048-byte hardware sectors (522 MB)
[ 1326.068000] sd 3:0:0:0: [sdb] Write Protect is off
[ 1326.068000] sd 3:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 1326.068000] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 1326.072000] sd 3:0:0:0: [sdb] 254720 2048-byte hardware sectors (522 MB)
[ 1326.072000] sd 3:0:0:0: [sdb] Write Protect is off
[ 1326.072000] sd 3:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 1326.072000] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 1326.072000] sdb: sdb1
[ 1326.076000] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 1326.076000] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1328.448000] usb-storage: device scan complete
[ 1328.448000] scsi 4:0:0:0: Direct-Access Ext Hard Disk PQ: 0 ANSI: 4
[ 1328.448000] sd 4:0:0:0: [sdc] 234441648 512-byte hardware sectors (120034 MB)
[ 1328.448000] sd 4:0:0:0: [sdc] Write Protect is off
[ 1328.448000] sd 4:0:0:0: [sdc] Mode Sense: 10 00 00 00
[ 1328.448000] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 1328.448000] sd 4:0:0:0: [sdc] 234441648 512-byte hardware sectors (120034 MB)
[ 1328.448000] sd 4:0:0:0: [sdc] Write Protect is off
[ 1328.448000] sd 4:0:0:0: [sdc] Mode Sense: 10 00 00 00
[ 1328.448000] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 1328.448000] sdc: sdc1
[ 1328.472000] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 1328.472000] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 1464.780000] usb 5-2: USB disconnect, address 5
[ 1466.564000] usb 5-2: new high speed USB device using ehci_hcd and address 7
[ 1466.696000] usb 5-2: configuration #1 chosen from 1 choice
[ 1466.696000] scsi5 : SCSI emulation for USB Mass Storage devices
[ 1466.696000] usb-storage: device found at 7
[ 1466.696000] usb-storage: waiting for device to settle before scanning
[ 1471.696000] usb-storage: device scan complete
[ 1471.696000] scsi 5:0:0:0: Direct-Access Samsung YP-U1 0100 PQ: 0 ANSI: 4
[ 1471.696000] sd 5:0:0:0: [sdb] 254720 2048-byte hardware sectors (522 MB)
[ 1471.696000] sd 5:0:0:0: [sdb] Write Protect is off
[ 1471.696000] sd 5:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 1471.696000] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 1471.700000] sd 5:0:0:0: [sdb] 254720 2048-byte hardware sectors (522 MB)
[ 1471.700000] sd 5:0:0:0: [sdb] Write Protect is off
[ 1471.700000] sd 5:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 1471.700000] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 1471.700000] sdb: sdb1
[ 1471.704000] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 1471.704000] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 4999.700000] usb 5-1: USB disconnect, address 6
[ 5000.556000] usb 5-2: USB disconnect, address 7
[ 5432.004000] usb 2-2: USB disconnect, address 3
Re: [Video] Problemi con webcam integrata....HELP ME!!!
dai il comando
lsusb
lsusb
Massimiliano Ubuntu user # 16155
Potrete ingannare tutti per un po'. Potrete ingannare qualcuno per sempre.
Ma non potrete ingannare tutti per sempre [Abramo Lincoln]
Potrete ingannare tutti per un po'. Potrete ingannare qualcuno per sempre.
Ma non potrete ingannare tutti per sempre [Abramo Lincoln]
Re: [Video] Problemi con webcam integrata....HELP ME!!!
Questa è la risposta:
vojevoda@vojevoda-laptop:~$ lsusb
Bus 005 Device 003: ID 0402:5602 ALi Corp.
Bus 005 Device 001: ID 0000:0000
Bus 002 Device 004: ID 046d:c03d Logitech, Inc.
Bus 002 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Considerando il fatto che ho un mouse della logitec...
vojevoda@vojevoda-laptop:~$ lsusb
Bus 005 Device 003: ID 0402:5602 ALi Corp.
Bus 005 Device 001: ID 0000:0000
Bus 002 Device 004: ID 046d:c03d Logitech, Inc.
Bus 002 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Considerando il fatto che ho un mouse della logitec...
Re: [Video] Problemi con webcam integrata....HELP ME!!!
Raga ho lo stesso problema con un macbook pro do il comando lsusb e mi esce questo:
Bus 004 Device 002: ID 05ac:8240 Apple Computer, Inc.
Bus 004 Device 001: ID 0000:0000
Bus 001 Device 002: ID 05ac:021b Apple Computer, Inc.
Bus 001 Device 001: ID 0000:0000
Bus 003 Device 002: ID 1241:1177 Belkin F8E842-DL Mouse
Bus 003 Device 001: ID 0000:0000
Bus 005 Device 003: ID 05ac:8205 Apple Computer, Inc.
Bus 005 Device 001: ID 0000:0000
Bus 002 Device 003: ID 05ac:8300 Apple Computer, Inc.
Bus 002 Device 001: ID 0000:0000
non so quale sia la cam;
Bus 004 Device 002: ID 05ac:8240 Apple Computer, Inc.
Bus 004 Device 001: ID 0000:0000
Bus 001 Device 002: ID 05ac:021b Apple Computer, Inc.
Bus 001 Device 001: ID 0000:0000
Bus 003 Device 002: ID 1241:1177 Belkin F8E842-DL Mouse
Bus 003 Device 001: ID 0000:0000
Bus 005 Device 003: ID 05ac:8205 Apple Computer, Inc.
Bus 005 Device 001: ID 0000:0000
Bus 002 Device 003: ID 05ac:8300 Apple Computer, Inc.
Bus 002 Device 001: ID 0000:0000
non so quale sia la cam;
Re: [Video] Problemi con webcam integrata....HELP ME!!!
e questo è il mio dmsg:
[ 50.203410] CPU: Physical Processor ID: 0
[ 50.203411] CPU: Processor Core ID: 0
[ 50.203412] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 50.203420] Compat vDSO mapped to ffffe000.
[ 50.203431] Checking 'hlt' instruction... OK.
[ 50.219312] SMP alternatives: switching to UP code
[ 50.219913] Early unpacking initramfs... done
[ 50.462959] ACPI: Core revision 20070126
[ 50.462993] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 50.464608] CPU0: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz stepping 06
[ 50.464621] SMP alternatives: switching to SMP code
[ 50.464687] Booting processor 1/1 eip 3000
[ 50.475061] Initializing CPU#1
[ 50.554482] Calibrating delay using timer specific routine.. 4655.04 BogoMIPS (lpj=9310089)
[ 50.554487] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 50.554490] monitor/mwait feature present.
[ 50.554493] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 50.554494] CPU: L2 cache: 4096K
[ 50.554496] CPU: Physical Processor ID: 0
[ 50.554497] CPU: Processor Core ID: 1
[ 50.554498] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 50.555129] CPU1: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz stepping 06
[ 50.555148] Total of 2 processors activated (9315.02 BogoMIPS).
[ 50.555340] ENABLING IO-APIC IRQs
[ 50.555533] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 50.702233] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 50.722202] Brought up 2 CPUs
[ 50.842024] migration_cost=42
[ 50.842129] Booting paravirtualized kernel on bare hardware
[ 50.842210] Time: 10:07:16 Date: 01/24/108
[ 50.842226] NET: Registered protocol family 16
[ 50.842291] EISA bus registered
[ 50.842294] ACPI: bus type pci registered
[ 50.842431] PCI: Using configuration type 1
[ 50.842432] Setting up standard PCI resources
[ 50.843626] ACPI: EC: Found ECDT
[ 50.845150] ACPI: System BIOS is requesting _OSI(Linux)
[ 50.845152] ACPI: Please test with "acpi_osi=!Linux"
[ 50.845153] Please send dmidecode to linux-acpi@vger.kernel.org
[ 50.845468] ACPI: Interpreter enabled
[ 50.845471] ACPI: (supports S0 S3 S4 S5)
[ 50.845483] ACPI: Using IOAPIC for interrupt routing
[ 50.854839] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[ 50.855039] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 50.855051] PCI: Probing PCI hardware (bus 00)
[ 50.855739] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 50.855743] PCI quirk: region 0500-053f claimed by ICH6 GPIO
[ 50.857092] PCI: Transparent bridge - 0000:00:1e.0
[ 50.857171] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 50.857373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 50.857459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 50.857543] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 50.857624] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 50.857713] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 50.863396] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 50.863463] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 50.863528] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 50.863593] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 50.863657] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 50.863724] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 50.863789] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 50.863853] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 50.863943] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 50.863950] pnp: PnP ACPI init
[ 50.863956] ACPI: bus type pnp registered
[ 50.867045] pnp: PnP ACPI: found 9 devices
[ 50.867047] ACPI: ACPI bus type pnp unregistered
[ 50.867050] PnPBIOS: Disabled by ACPI PNP
[ 50.867131] PCI: Using ACPI for IRQ routing
[ 50.867132] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 50.867242] NET: Registered protocol family 8
[ 50.867244] NET: Registered protocol family 20
[ 50.867279] pnp: 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved
[ 50.867282] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 50.867284] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 50.867286] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 50.867291] pnp: 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
[ 50.869799] Time: tsc clocksource has been installed.
[ 50.869805] Switched to high resolution mode on CPU 0
[ 50.869877] Switched to high resolution mode on CPU 1
[ 50.897460] PCI: Bridge: 0000:00:01.0
[ 50.897462] IO window: 3000-3fff
[ 50.897465] MEM window: 98300000-983fffff
[ 50.897468] PREFETCH window: 80000000-8fffffff
[ 50.897471] PCI: Bridge: 0000:00:1c.0
[ 50.897474] IO window: 2000-2fff
[ 50.897479] MEM window: 98200000-982fffff
[ 50.897483] PREFETCH window: 98500000-985fffff
[ 50.897488] PCI: Bridge: 0000:00:1c.1
[ 50.897489] IO window: disabled.
[ 50.897495] MEM window: 98100000-981fffff
[ 50.897499] PREFETCH window: disabled.
[ 50.897504] PCI: Bridge: 0000:00:1c.2
[ 50.897506] IO window: 1000-1fff
[ 50.897511] MEM window: 94100000-980fffff
[ 50.897515] PREFETCH window: 90000000-93ffffff
[ 50.897521] PCI: Bridge: 0000:00:1e.0
[ 50.897522] IO window: disabled.
[ 50.897527] MEM window: 94000000-940fffff
[ 50.897531] PREFETCH window: disabled.
[ 50.897544] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 50.897548] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 50.897570] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 50.897575] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 50.897596] ACPI: PCI Interrupt 0000:00:1c.1 -> GSI 16 (level, low) -> IRQ 16
[ 50.897600] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 50.897622] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 50.897627] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 50.897640] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 50.897648] NET: Registered protocol family 2
[ 50.945622] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 50.945682] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 50.946215] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 50.946400] TCP: Hash tables configured (established 131072 bind 65536)
[ 50.946402] TCP reno registered
[ 50.961665] checking if image is initramfs... it is
[ 51.427671] Freeing initrd memory: 7047k freed
[ 51.428174] audit: initializing netlink socket (disabled)
[ 51.428189] audit(1203847636.124:1): initialized
[ 51.428269] highmem bounce pool size: 64 pages
[ 51.429801] VFS: Disk quotas dquot_6.5.1
[ 51.429837] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 51.429911] io scheduler noop registered
[ 51.429913] io scheduler anticipatory registered
[ 51.429914] io scheduler deadline registered
[ 51.429924] io scheduler cfq registered (default)
[ 51.430022] Boot video device is 0000:01:00.0
[ 51.430085] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 51.430116] assign_interrupt_mode Found MSI capability
[ 51.430119] Allocate Port Service[0000:00:01.0:pcie00]
[ 51.430186] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 51.430240] assign_interrupt_mode Found MSI capability
[ 51.430242] Allocate Port Service[0000:00:1c.0:pcie00]
[ 51.430266] Allocate Port Service[0000:00:1c.0:pcie02]
[ 51.430353] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 51.430407] assign_interrupt_mode Found MSI capability
[ 51.430409] Allocate Port Service[0000:00:1c.1:pcie00]
[ 51.430435] Allocate Port Service[0000:00:1c.1:pcie02]
[ 51.430522] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 51.430575] assign_interrupt_mode Found MSI capability
[ 51.430576] Allocate Port Service[0000:00:1c.2:pcie00]
[ 51.430602] Allocate Port Service[0000:00:1c.2:pcie02]
[ 51.430742] isapnp: Scanning for PnP cards...
[ 51.784400] isapnp: No Plug & Play device found
[ 51.800581] Real Time Clock Driver v1.12ac
[ 51.800776] hpet_resources: 0xfed00000 is busy
[ 51.800798] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 51.801635] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 51.801736] input: Macintosh mouse button emulation as /class/input/input0
[ 51.801832] PNP: No PS/2 controller found. Probing ports directly.
[ 51.802688] i8042.c: No controller found.
[ 51.802846] mice: PS/2 mouse device common for all mice
[ 51.802927] EISA: Probing bus 0 at eisa.0
[ 51.802933] Cannot allocate resource for EISA slot 1
[ 51.802935] Cannot allocate resource for EISA slot 2
[ 51.802937] Cannot allocate resource for EISA slot 3
[ 51.802939] Cannot allocate resource for EISA slot 4
[ 51.802956] EISA: Detected 0 cards.
[ 51.803018] TCP cubic registered
[ 51.803028] NET: Registered protocol family 1
[ 51.803043] Using IPI No-Shortcut mode
[ 51.803165] Magic number: 12:900:123
[ 51.803438] Freeing unused kernel memory: 364k freed
[ 52.945580] AppArmor: AppArmor initializedaudit(1203847637.624:2): type=1505 info="AppArmor initialized" pid=1245
[ 52.954412] fuse init (API version 7.
[ 52.960106] Failure registering capabilities with primary security module.
[ 52.990881] ACPI: SSDT 7FEB8A90, 02F0 (r1 APPLE Cpu0Ist 3000 INTL 20050309)
[ 52.991021] ACPI: SSDT 7FEB6C10, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309)
[ 52.991196] Monitor-Mwait will be used to enter C-1 state
[ 52.991198] Monitor-Mwait will be used to enter C-2 state
[ 52.991200] Monitor-Mwait will be used to enter C-3 state
[ 52.991203] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 52.991207] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 52.991365] ACPI: SSDT 7FEB7F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309)
[ 52.991493] ACPI: SSDT 7FEB6F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309)
[ 52.993178] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 52.993182] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 53.348943] usbcore: registered new interface driver usbfs
[ 53.348960] usbcore: registered new interface driver hub
[ 53.348976] usbcore: registered new device driver usb
[ 53.349488] USB Universal Host Controller Interface driver v3.0
[ 53.349551] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 53.349568] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 53.349573] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 53.349672] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 53.349735] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00004080
[ 53.349829] usb usb1: configuration #1 chosen from 1 choice
[ 53.349850] hub 1-0:1.0: USB hub found
[ 53.349855] hub 1-0:1.0: 2 ports detected
[ 53.373325] SCSI subsystem initialized
[ 53.433933] libata version 2.21 loaded.
[ 3.204000] Marking TSC unstable due to: possible TSC halt in C2.
[ 3.208000] Time: hpet clocksource has been installed.
[ 3.212000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 3.212000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.212000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.212000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 3.212000] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.212000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 3.212000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0x98405400
[ 3.216000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.216000] usb usb2: configuration #1 chosen from 1 choice
[ 3.216000] hub 2-0:1.0: USB hub found
[ 3.216000] hub 2-0:1.0: 8 ports detected
[ 3.324000] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 20
[ 3.372000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[94004000-940047ff] Max Packet=[4096] IR/IT contexts=[4/8]
[ 3.380000] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 20
[ 3.380000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.380000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.380000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.380000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00004060
[ 3.380000] usb usb3: configuration #1 chosen from 1 choice
[ 3.380000] hub 3-0:1.0: USB hub found
[ 3.380000] hub 3-0:1.0: 2 ports detected
[ 3.484000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 3.484000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.484000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.484000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.484000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[ 3.484000] usb usb4: configuration #1 chosen from 1 choice
[ 3.484000] hub 4-0:1.0: USB hub found
[ 3.484000] hub 4-0:1.0: 2 ports detected
[ 3.588000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 3.588000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.588000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.588000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 3.588000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
[ 3.588000] usb usb5: configuration #1 chosen from 1 choice
[ 3.588000] hub 5-0:1.0: USB hub found
[ 3.588000] hub 5-0:1.0: 2 ports detected
[ 3.692000] ata_piix 0000:00:1f.1: version 2.11
[ 3.692000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 3.692000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 3.692000] scsi0 : ata_piix
[ 3.692000] scsi1 : ata_piix
[ 3.692000] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000140b0 irq 14
[ 3.692000] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x000140b8 irq 15
[ 3.852000] usb 2-4: new high speed USB device using ehci_hcd and address 3
[ 3.984000] usb 2-4: configuration #1 chosen from 1 choice
[ 4.012000] ata1.00: ATAPI: HL-DT-ST DVDRW GWA4080MA, AE39, max UDMA/33
[ 4.184000] ata1.00: configured for UDMA/33
[ 4.356000] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRW GWA4080MA AE39 PQ: 0 ANSI: 5
[ 4.356000] ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ]
[ 4.356000] ata_piix 0000:00:1f.2: invalid MAP value 0
[ 4.512000] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 19 (level, low) -> IRQ 20
[ 4.512000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 4.512000] scsi2 : ata_piix
[ 4.512000] scsi3 : ata_piix
[ 4.512000] ata3: SATA max UDMA/133 cmd 0x000140c8 ctl 0x000140e6 bmdma 0x000140a0 irq 20
[ 4.512000] ata4: SATA max UDMA/133 cmd 0x000140c0 ctl 0x000140e2 bmdma 0x000140a8 irq 20
[ 4.648000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0019e3fffe1e3404]
[ 4.700000] ata3.01: ATA-8: FUJITSU MHW2120BH, 00810013, max UDMA/100
[ 4.700000] ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.716000] ata3.01: configured for UDMA/100
[ 4.836000] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 4.884000] scsi 2:0:1:0: Direct-Access ATA FUJITSU MHW2120B 0081 PQ: 0 ANSI: 5
[ 4.888000] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 4.888000] sd 2:0:1:0: [sda] Write Protect is off
[ 4.888000] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 4.888000] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.888000] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 4.888000] sd 2:0:1:0: [sda] Write Protect is off
[ 4.888000] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 4.888000] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.888000] sda: sda1 sda2
[ 4.892000] sd 2:0:1:0: [sda] Attached SCSI disk
[ 4.892000] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[ 4.892000] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 4.956000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 4.956000] Uniform CD-ROM driver Revision: 3.20
[ 4.956000] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 5.028000] usb 4-2: configuration #1 chosen from 1 choice
[ 5.208000] Attempting manual resume
[ 5.208000] swsusp: Resume From Partition 8:5
[ 5.208000] PM: Checking swsusp image.
[ 5.208000] PM: Resume from disk failed.
[ 5.248000] kjournald starting. Commit interval 5 seconds
[ 5.248000] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.268000] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 5.460000] usb 5-1: configuration #1 chosen from 1 choice
[ 5.464000] usbcore: registered new interface driver hiddev
[ 5.708000] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 5.916000] usb 1-2: configuration #1 chosen from 1 choice
[ 5.948000] input: HID 05ac:1000 as /class/input/input1
[ 5.948000] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 5.964000] input: HID 05ac:1000 as /class/input/input2
[ 5.964000] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 5.968000] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input3
[ 5.968000] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 5.972000] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input4
[ 5.972000] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 5.972000] usbcore: registered new interface driver usbhid
[ 5.972000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 12.576000] Linux agpgart interface v0.102 (c) Dave Jones
[ 12.608000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.612000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.864000] ath_hal: module license 'Proprietary' taints kernel.
[ 12.868000] ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
[ 12.980000] wlan: 0.8.4.2 (svn r2717)
[ 13.016000] ath_pci: 0.9.4.5 (svn r2717)
[ 13.016000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 13.016000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 13.152000] ath_pci: switching rfkill capability off
[ 13.152000] intel_rng: FWH not detected
[ 13.184000] ath_rate_sample: 1.2 (svn r2717)
[ 13.184000] ath_pci: switching per-packet transmit power control off
[ 13.184000] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 13.184000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 13.184000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 13.184000] wifi0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 13.184000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 13.184000] wifi0: mac 12.10 phy 8.1 radio 12.0
[ 13.184000] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 13.184000] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 13.184000] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 13.184000] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 13.184000] wifi0: Use hw queue 8 for CAB traffic
[ 13.184000] wifi0: Use hw queue 9 for beacons
[ 13.288000] Linux video capture interface: v2.00
[ 13.332000] wifi0: Atheros 5418: mem=0x98100000, irq=17
[ 13.332000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 13.332000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 13.332000] sky2 0000:02:00.0: v1.18 addr 0x98200000 irq 16 Yukon-EC (0xb6) rev 2
[ 13.332000] sky2 eth0: addr 00:17:f2:cb:39:cb
[ 13.360000] usbcore: registered new interface driver xpad
[ 13.360000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6
[ 13.364000] iTCO_vendor_support: vendor-support=0
[ 13.368000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 13.368000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460)
[ 13.368000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.456000] input: Apple Mac mini infrared remote control driver as /class/input/input5
[ 13.456000] usbcore: registered new interface driver appleir
[ 13.456000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/mactel/appleir.c: v1.1:USB Apple MacMini IR Receiver driver
[ 13.576000] uvcvideo: iSight: firmware file AppleUSBVideoSupport not found.
[ 13.576000] usbcore: registered new interface driver isight
[ 13.576000] USB Video Class driver (v0.1.0)
[ 13.580000] appletouch Geyser 3 inited.
[ 13.580000] input: appletouch as /class/input/input6
[ 13.580000] usbcore: registered new interface driver appletouch
[ 13.632000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[ 13.632000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 13.796000] hda_codec: STAC922x, Apple subsys_id=106b1e00
[ 14.308000] lp: driver loaded but no devices found
[ 14.412000] Adding 4803392k swap on /dev/sda5. Priority:-1 extents:1 across:4803392k
[ 14.804000] EXT3 FS on sda1, internal journal
[ 16.144000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 16.232000] ACPI: Battery Slot [BAT0] (battery present)
[ 16.288000] No dock devices found.
[ 16.320000] ACPI: AC Adapter [ADP1] (off-line)
[ 16.400000] input: Power Button (FF) as /class/input/input7
[ 16.400000] ACPI: Power Button (FF) [PWRF]
[ 16.400000] input: Lid Switch as /class/input/input8
[ 16.400000] ACPI: Lid Switch [liD0]
[ 16.400000] input: Power Button (CM) as /class/input/input9
[ 16.400000] ACPI: Power Button (CM) [PWRB]
[ 16.400000] input: Sleep Button (CM) as /class/input/input10
[ 16.400000] ACPI: Sleep Button (CM) [SLPB]
[ 17.924000] ppdev: user-space parallel port driver
[ 18.200000] sky2 eth0: enabling interface
[ 18.292000] audit(1203847653.094:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5059 profile="/usr/sbin/cupsd"
[ 18.352000] apm: BIOS not found.
[ 19.496000] Failure registering capabilities with primary security module.
[ 19.720000] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -71
[ 19.876000] Bluetooth: Core ver 2.11
[ 19.876000] NET: Registered protocol family 31
[ 19.876000] Bluetooth: HCI device and connection manager initialized
[ 19.876000] Bluetooth: HCI socket layer initialized
[ 19.880000] Bluetooth: L2CAP ver 2.8
[ 19.880000] Bluetooth: L2CAP socket layer initialized
[ 19.964000] Bluetooth: RFCOMM socket layer initialized
[ 19.964000] Bluetooth: RFCOMM TTY layer initialized
[ 19.964000] Bluetooth: RFCOMM ver 1.8
[ 20.004000] usb 5-1: USB disconnect, address 2
[ 20.248000] usb 5-1: new full speed USB device using uhci_hcd and address 3
[ 20.456000] usb 5-1: configuration #1 chosen from 1 choice
[ 20.536000] Bluetooth: HCI USB driver ver 2.9
[ 20.540000] usbcore: registered new interface driver hci_usb
[ 32.368000] /dev/vmmon[5583]: VMCI: Driver initialized.
[ 32.372000] /dev/vmmon[5583]: Module vmmon: registered with major=10 minor=165
[ 32.372000] /dev/vmmon[5583]: Module vmmon: initialized
[ 32.460000] [fglrx] Maximum main memory to use for locked dma buffers: 1885 MBytes.
[ 32.460000] [fglrx] module loaded - fglrx 8.37.6 [May 25 2007] on minor 0
[ 32.500000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 33.104000] /dev/vmnet: open called by PID 5641 (vmnet-bridge)
[ 33.104000] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 33.104000] /dev/vmnet: port on hub 0 successfully opened
[ 33.104000] bridge-eth0: enabling the bridge
[ 33.104000] bridge-eth0: up
[ 33.104000] bridge-eth0: already up
[ 33.104000] bridge-eth0: attached
[ 33.356000] /dev/vmnet: open called by PID 5658 (vmnet-netifup)
[ 33.356000] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 33.356000] /dev/vmnet: port on hub 1 successfully opened
[ 33.552000] /dev/vmnet: open called by PID 5657 (vmnet-dhcpd)
[ 33.552000] /dev/vmnet: port on hub 1 successfully opened
[ 33.568000] /dev/vmnet: open called by PID 5680 (vmnet-netifup)
[ 33.568000] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 33.568000] /dev/vmnet: port on hub 8 successfully opened
[ 33.600000] /dev/vmnet: open called by PID 5679 (vmnet-dhcpd)
[ 33.600000] /dev/vmnet: port on hub 8 successfully opened
[ 33.628000] /dev/vmnet: open called by PID 5695 (vmnet-natd)
[ 33.628000] /dev/vmnet: port on hub 8 successfully opened
[ 34.616000] [fglrx] total GART = 130023424
[ 34.616000] [fglrx] free GART = 114032640
[ 34.616000] [fglrx] max single GART = 114032640
[ 34.616000] [fglrx] total LFB = 268304384
[ 34.616000] [fglrx] free LFB = 250089472
[ 34.616000] [fglrx] max single LFB = 250089472
[ 34.616000] [fglrx] total Inv = 0
[ 34.616000] [fglrx] free Inv = 0
[ 34.616000] [fglrx] max single Inv = 0
[ 34.616000] [fglrx] total TIM = 0
[ 36.000000] Clocksource tsc unstable (delta = -163199353 ns)
[ 36.640000] appletouch: incomplete data package (first byte: 2, length: 4).
[ 63.536000] NET: Registered protocol family 17
[ 97.616000] NET: Registered protocol family 10
[ 97.616000] lo: Disabled Privacy Extensions
[ 97.616000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 107.732000] ath0: no IPv6 routers present
[ 107.984000] vmnet1: no IPv6 routers present
[ 108.072000] vmnet8: no IPv6 routers present
[ 822.980000] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 823.176000] usb 3-1: configuration #1 chosen from 1 choice
[ 823.224000] input: HID 1241:1177 as /class/input/input11
[ 823.224000] input: USB HID v1.10 Mouse [HID 1241:1177] on usb-0000:00:1d.1-1
[ 50.203410] CPU: Physical Processor ID: 0
[ 50.203411] CPU: Processor Core ID: 0
[ 50.203412] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 50.203420] Compat vDSO mapped to ffffe000.
[ 50.203431] Checking 'hlt' instruction... OK.
[ 50.219312] SMP alternatives: switching to UP code
[ 50.219913] Early unpacking initramfs... done
[ 50.462959] ACPI: Core revision 20070126
[ 50.462993] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 50.464608] CPU0: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz stepping 06
[ 50.464621] SMP alternatives: switching to SMP code
[ 50.464687] Booting processor 1/1 eip 3000
[ 50.475061] Initializing CPU#1
[ 50.554482] Calibrating delay using timer specific routine.. 4655.04 BogoMIPS (lpj=9310089)
[ 50.554487] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 50.554490] monitor/mwait feature present.
[ 50.554493] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 50.554494] CPU: L2 cache: 4096K
[ 50.554496] CPU: Physical Processor ID: 0
[ 50.554497] CPU: Processor Core ID: 1
[ 50.554498] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 50.555129] CPU1: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz stepping 06
[ 50.555148] Total of 2 processors activated (9315.02 BogoMIPS).
[ 50.555340] ENABLING IO-APIC IRQs
[ 50.555533] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 50.702233] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 50.722202] Brought up 2 CPUs
[ 50.842024] migration_cost=42
[ 50.842129] Booting paravirtualized kernel on bare hardware
[ 50.842210] Time: 10:07:16 Date: 01/24/108
[ 50.842226] NET: Registered protocol family 16
[ 50.842291] EISA bus registered
[ 50.842294] ACPI: bus type pci registered
[ 50.842431] PCI: Using configuration type 1
[ 50.842432] Setting up standard PCI resources
[ 50.843626] ACPI: EC: Found ECDT
[ 50.845150] ACPI: System BIOS is requesting _OSI(Linux)
[ 50.845152] ACPI: Please test with "acpi_osi=!Linux"
[ 50.845153] Please send dmidecode to linux-acpi@vger.kernel.org
[ 50.845468] ACPI: Interpreter enabled
[ 50.845471] ACPI: (supports S0 S3 S4 S5)
[ 50.845483] ACPI: Using IOAPIC for interrupt routing
[ 50.854839] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[ 50.855039] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 50.855051] PCI: Probing PCI hardware (bus 00)
[ 50.855739] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 50.855743] PCI quirk: region 0500-053f claimed by ICH6 GPIO
[ 50.857092] PCI: Transparent bridge - 0000:00:1e.0
[ 50.857171] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 50.857373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 50.857459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 50.857543] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 50.857624] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 50.857713] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 50.863396] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 50.863463] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 50.863528] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 50.863593] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 50.863657] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 50.863724] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 50.863789] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 50.863853] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 50.863943] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 50.863950] pnp: PnP ACPI init
[ 50.863956] ACPI: bus type pnp registered
[ 50.867045] pnp: PnP ACPI: found 9 devices
[ 50.867047] ACPI: ACPI bus type pnp unregistered
[ 50.867050] PnPBIOS: Disabled by ACPI PNP
[ 50.867131] PCI: Using ACPI for IRQ routing
[ 50.867132] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 50.867242] NET: Registered protocol family 8
[ 50.867244] NET: Registered protocol family 20
[ 50.867279] pnp: 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved
[ 50.867282] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 50.867284] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 50.867286] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 50.867291] pnp: 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
[ 50.869799] Time: tsc clocksource has been installed.
[ 50.869805] Switched to high resolution mode on CPU 0
[ 50.869877] Switched to high resolution mode on CPU 1
[ 50.897460] PCI: Bridge: 0000:00:01.0
[ 50.897462] IO window: 3000-3fff
[ 50.897465] MEM window: 98300000-983fffff
[ 50.897468] PREFETCH window: 80000000-8fffffff
[ 50.897471] PCI: Bridge: 0000:00:1c.0
[ 50.897474] IO window: 2000-2fff
[ 50.897479] MEM window: 98200000-982fffff
[ 50.897483] PREFETCH window: 98500000-985fffff
[ 50.897488] PCI: Bridge: 0000:00:1c.1
[ 50.897489] IO window: disabled.
[ 50.897495] MEM window: 98100000-981fffff
[ 50.897499] PREFETCH window: disabled.
[ 50.897504] PCI: Bridge: 0000:00:1c.2
[ 50.897506] IO window: 1000-1fff
[ 50.897511] MEM window: 94100000-980fffff
[ 50.897515] PREFETCH window: 90000000-93ffffff
[ 50.897521] PCI: Bridge: 0000:00:1e.0
[ 50.897522] IO window: disabled.
[ 50.897527] MEM window: 94000000-940fffff
[ 50.897531] PREFETCH window: disabled.
[ 50.897544] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 50.897548] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 50.897570] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 50.897575] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 50.897596] ACPI: PCI Interrupt 0000:00:1c.1 -> GSI 16 (level, low) -> IRQ 16
[ 50.897600] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 50.897622] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 50.897627] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 50.897640] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 50.897648] NET: Registered protocol family 2
[ 50.945622] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 50.945682] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 50.946215] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 50.946400] TCP: Hash tables configured (established 131072 bind 65536)
[ 50.946402] TCP reno registered
[ 50.961665] checking if image is initramfs... it is
[ 51.427671] Freeing initrd memory: 7047k freed
[ 51.428174] audit: initializing netlink socket (disabled)
[ 51.428189] audit(1203847636.124:1): initialized
[ 51.428269] highmem bounce pool size: 64 pages
[ 51.429801] VFS: Disk quotas dquot_6.5.1
[ 51.429837] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 51.429911] io scheduler noop registered
[ 51.429913] io scheduler anticipatory registered
[ 51.429914] io scheduler deadline registered
[ 51.429924] io scheduler cfq registered (default)
[ 51.430022] Boot video device is 0000:01:00.0
[ 51.430085] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 51.430116] assign_interrupt_mode Found MSI capability
[ 51.430119] Allocate Port Service[0000:00:01.0:pcie00]
[ 51.430186] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 51.430240] assign_interrupt_mode Found MSI capability
[ 51.430242] Allocate Port Service[0000:00:1c.0:pcie00]
[ 51.430266] Allocate Port Service[0000:00:1c.0:pcie02]
[ 51.430353] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 51.430407] assign_interrupt_mode Found MSI capability
[ 51.430409] Allocate Port Service[0000:00:1c.1:pcie00]
[ 51.430435] Allocate Port Service[0000:00:1c.1:pcie02]
[ 51.430522] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 51.430575] assign_interrupt_mode Found MSI capability
[ 51.430576] Allocate Port Service[0000:00:1c.2:pcie00]
[ 51.430602] Allocate Port Service[0000:00:1c.2:pcie02]
[ 51.430742] isapnp: Scanning for PnP cards...
[ 51.784400] isapnp: No Plug & Play device found
[ 51.800581] Real Time Clock Driver v1.12ac
[ 51.800776] hpet_resources: 0xfed00000 is busy
[ 51.800798] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 51.801635] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 51.801736] input: Macintosh mouse button emulation as /class/input/input0
[ 51.801832] PNP: No PS/2 controller found. Probing ports directly.
[ 51.802688] i8042.c: No controller found.
[ 51.802846] mice: PS/2 mouse device common for all mice
[ 51.802927] EISA: Probing bus 0 at eisa.0
[ 51.802933] Cannot allocate resource for EISA slot 1
[ 51.802935] Cannot allocate resource for EISA slot 2
[ 51.802937] Cannot allocate resource for EISA slot 3
[ 51.802939] Cannot allocate resource for EISA slot 4
[ 51.802956] EISA: Detected 0 cards.
[ 51.803018] TCP cubic registered
[ 51.803028] NET: Registered protocol family 1
[ 51.803043] Using IPI No-Shortcut mode
[ 51.803165] Magic number: 12:900:123
[ 51.803438] Freeing unused kernel memory: 364k freed
[ 52.945580] AppArmor: AppArmor initializedaudit(1203847637.624:2): type=1505 info="AppArmor initialized" pid=1245
[ 52.954412] fuse init (API version 7.
[ 52.960106] Failure registering capabilities with primary security module.
[ 52.990881] ACPI: SSDT 7FEB8A90, 02F0 (r1 APPLE Cpu0Ist 3000 INTL 20050309)
[ 52.991021] ACPI: SSDT 7FEB6C10, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309)
[ 52.991196] Monitor-Mwait will be used to enter C-1 state
[ 52.991198] Monitor-Mwait will be used to enter C-2 state
[ 52.991200] Monitor-Mwait will be used to enter C-3 state
[ 52.991203] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 52.991207] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 52.991365] ACPI: SSDT 7FEB7F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309)
[ 52.991493] ACPI: SSDT 7FEB6F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309)
[ 52.993178] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 52.993182] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 53.348943] usbcore: registered new interface driver usbfs
[ 53.348960] usbcore: registered new interface driver hub
[ 53.348976] usbcore: registered new device driver usb
[ 53.349488] USB Universal Host Controller Interface driver v3.0
[ 53.349551] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 53.349568] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 53.349573] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 53.349672] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 53.349735] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00004080
[ 53.349829] usb usb1: configuration #1 chosen from 1 choice
[ 53.349850] hub 1-0:1.0: USB hub found
[ 53.349855] hub 1-0:1.0: 2 ports detected
[ 53.373325] SCSI subsystem initialized
[ 53.433933] libata version 2.21 loaded.
[ 3.204000] Marking TSC unstable due to: possible TSC halt in C2.
[ 3.208000] Time: hpet clocksource has been installed.
[ 3.212000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 3.212000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.212000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.212000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 3.212000] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.212000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 3.212000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0x98405400
[ 3.216000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.216000] usb usb2: configuration #1 chosen from 1 choice
[ 3.216000] hub 2-0:1.0: USB hub found
[ 3.216000] hub 2-0:1.0: 8 ports detected
[ 3.324000] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 20
[ 3.372000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[94004000-940047ff] Max Packet=[4096] IR/IT contexts=[4/8]
[ 3.380000] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 20
[ 3.380000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.380000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.380000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.380000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00004060
[ 3.380000] usb usb3: configuration #1 chosen from 1 choice
[ 3.380000] hub 3-0:1.0: USB hub found
[ 3.380000] hub 3-0:1.0: 2 ports detected
[ 3.484000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 3.484000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.484000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.484000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.484000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[ 3.484000] usb usb4: configuration #1 chosen from 1 choice
[ 3.484000] hub 4-0:1.0: USB hub found
[ 3.484000] hub 4-0:1.0: 2 ports detected
[ 3.588000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 3.588000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.588000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.588000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 3.588000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
[ 3.588000] usb usb5: configuration #1 chosen from 1 choice
[ 3.588000] hub 5-0:1.0: USB hub found
[ 3.588000] hub 5-0:1.0: 2 ports detected
[ 3.692000] ata_piix 0000:00:1f.1: version 2.11
[ 3.692000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 3.692000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 3.692000] scsi0 : ata_piix
[ 3.692000] scsi1 : ata_piix
[ 3.692000] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000140b0 irq 14
[ 3.692000] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x000140b8 irq 15
[ 3.852000] usb 2-4: new high speed USB device using ehci_hcd and address 3
[ 3.984000] usb 2-4: configuration #1 chosen from 1 choice
[ 4.012000] ata1.00: ATAPI: HL-DT-ST DVDRW GWA4080MA, AE39, max UDMA/33
[ 4.184000] ata1.00: configured for UDMA/33
[ 4.356000] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRW GWA4080MA AE39 PQ: 0 ANSI: 5
[ 4.356000] ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ]
[ 4.356000] ata_piix 0000:00:1f.2: invalid MAP value 0
[ 4.512000] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 19 (level, low) -> IRQ 20
[ 4.512000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 4.512000] scsi2 : ata_piix
[ 4.512000] scsi3 : ata_piix
[ 4.512000] ata3: SATA max UDMA/133 cmd 0x000140c8 ctl 0x000140e6 bmdma 0x000140a0 irq 20
[ 4.512000] ata4: SATA max UDMA/133 cmd 0x000140c0 ctl 0x000140e2 bmdma 0x000140a8 irq 20
[ 4.648000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0019e3fffe1e3404]
[ 4.700000] ata3.01: ATA-8: FUJITSU MHW2120BH, 00810013, max UDMA/100
[ 4.700000] ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.716000] ata3.01: configured for UDMA/100
[ 4.836000] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 4.884000] scsi 2:0:1:0: Direct-Access ATA FUJITSU MHW2120B 0081 PQ: 0 ANSI: 5
[ 4.888000] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 4.888000] sd 2:0:1:0: [sda] Write Protect is off
[ 4.888000] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 4.888000] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.888000] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 4.888000] sd 2:0:1:0: [sda] Write Protect is off
[ 4.888000] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 4.888000] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.888000] sda: sda1 sda2
[ 4.892000] sd 2:0:1:0: [sda] Attached SCSI disk
[ 4.892000] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[ 4.892000] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 4.956000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 4.956000] Uniform CD-ROM driver Revision: 3.20
[ 4.956000] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 5.028000] usb 4-2: configuration #1 chosen from 1 choice
[ 5.208000] Attempting manual resume
[ 5.208000] swsusp: Resume From Partition 8:5
[ 5.208000] PM: Checking swsusp image.
[ 5.208000] PM: Resume from disk failed.
[ 5.248000] kjournald starting. Commit interval 5 seconds
[ 5.248000] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.268000] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 5.460000] usb 5-1: configuration #1 chosen from 1 choice
[ 5.464000] usbcore: registered new interface driver hiddev
[ 5.708000] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 5.916000] usb 1-2: configuration #1 chosen from 1 choice
[ 5.948000] input: HID 05ac:1000 as /class/input/input1
[ 5.948000] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 5.964000] input: HID 05ac:1000 as /class/input/input2
[ 5.964000] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 5.968000] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input3
[ 5.968000] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 5.972000] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input4
[ 5.972000] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 5.972000] usbcore: registered new interface driver usbhid
[ 5.972000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 12.576000] Linux agpgart interface v0.102 (c) Dave Jones
[ 12.608000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.612000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.864000] ath_hal: module license 'Proprietary' taints kernel.
[ 12.868000] ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
[ 12.980000] wlan: 0.8.4.2 (svn r2717)
[ 13.016000] ath_pci: 0.9.4.5 (svn r2717)
[ 13.016000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 13.016000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 13.152000] ath_pci: switching rfkill capability off
[ 13.152000] intel_rng: FWH not detected
[ 13.184000] ath_rate_sample: 1.2 (svn r2717)
[ 13.184000] ath_pci: switching per-packet transmit power control off
[ 13.184000] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 13.184000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 13.184000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 13.184000] wifi0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 13.184000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 13.184000] wifi0: mac 12.10 phy 8.1 radio 12.0
[ 13.184000] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 13.184000] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 13.184000] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 13.184000] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 13.184000] wifi0: Use hw queue 8 for CAB traffic
[ 13.184000] wifi0: Use hw queue 9 for beacons
[ 13.288000] Linux video capture interface: v2.00
[ 13.332000] wifi0: Atheros 5418: mem=0x98100000, irq=17
[ 13.332000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 13.332000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 13.332000] sky2 0000:02:00.0: v1.18 addr 0x98200000 irq 16 Yukon-EC (0xb6) rev 2
[ 13.332000] sky2 eth0: addr 00:17:f2:cb:39:cb
[ 13.360000] usbcore: registered new interface driver xpad
[ 13.360000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6
[ 13.364000] iTCO_vendor_support: vendor-support=0
[ 13.368000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 13.368000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460)
[ 13.368000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.456000] input: Apple Mac mini infrared remote control driver as /class/input/input5
[ 13.456000] usbcore: registered new interface driver appleir
[ 13.456000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/mactel/appleir.c: v1.1:USB Apple MacMini IR Receiver driver
[ 13.576000] uvcvideo: iSight: firmware file AppleUSBVideoSupport not found.
[ 13.576000] usbcore: registered new interface driver isight
[ 13.576000] USB Video Class driver (v0.1.0)
[ 13.580000] appletouch Geyser 3 inited.
[ 13.580000] input: appletouch as /class/input/input6
[ 13.580000] usbcore: registered new interface driver appletouch
[ 13.632000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[ 13.632000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 13.796000] hda_codec: STAC922x, Apple subsys_id=106b1e00
[ 14.308000] lp: driver loaded but no devices found
[ 14.412000] Adding 4803392k swap on /dev/sda5. Priority:-1 extents:1 across:4803392k
[ 14.804000] EXT3 FS on sda1, internal journal
[ 16.144000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 16.232000] ACPI: Battery Slot [BAT0] (battery present)
[ 16.288000] No dock devices found.
[ 16.320000] ACPI: AC Adapter [ADP1] (off-line)
[ 16.400000] input: Power Button (FF) as /class/input/input7
[ 16.400000] ACPI: Power Button (FF) [PWRF]
[ 16.400000] input: Lid Switch as /class/input/input8
[ 16.400000] ACPI: Lid Switch [liD0]
[ 16.400000] input: Power Button (CM) as /class/input/input9
[ 16.400000] ACPI: Power Button (CM) [PWRB]
[ 16.400000] input: Sleep Button (CM) as /class/input/input10
[ 16.400000] ACPI: Sleep Button (CM) [SLPB]
[ 17.924000] ppdev: user-space parallel port driver
[ 18.200000] sky2 eth0: enabling interface
[ 18.292000] audit(1203847653.094:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5059 profile="/usr/sbin/cupsd"
[ 18.352000] apm: BIOS not found.
[ 19.496000] Failure registering capabilities with primary security module.
[ 19.720000] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -71
[ 19.876000] Bluetooth: Core ver 2.11
[ 19.876000] NET: Registered protocol family 31
[ 19.876000] Bluetooth: HCI device and connection manager initialized
[ 19.876000] Bluetooth: HCI socket layer initialized
[ 19.880000] Bluetooth: L2CAP ver 2.8
[ 19.880000] Bluetooth: L2CAP socket layer initialized
[ 19.964000] Bluetooth: RFCOMM socket layer initialized
[ 19.964000] Bluetooth: RFCOMM TTY layer initialized
[ 19.964000] Bluetooth: RFCOMM ver 1.8
[ 20.004000] usb 5-1: USB disconnect, address 2
[ 20.248000] usb 5-1: new full speed USB device using uhci_hcd and address 3
[ 20.456000] usb 5-1: configuration #1 chosen from 1 choice
[ 20.536000] Bluetooth: HCI USB driver ver 2.9
[ 20.540000] usbcore: registered new interface driver hci_usb
[ 32.368000] /dev/vmmon[5583]: VMCI: Driver initialized.
[ 32.372000] /dev/vmmon[5583]: Module vmmon: registered with major=10 minor=165
[ 32.372000] /dev/vmmon[5583]: Module vmmon: initialized
[ 32.460000] [fglrx] Maximum main memory to use for locked dma buffers: 1885 MBytes.
[ 32.460000] [fglrx] module loaded - fglrx 8.37.6 [May 25 2007] on minor 0
[ 32.500000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 33.104000] /dev/vmnet: open called by PID 5641 (vmnet-bridge)
[ 33.104000] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 33.104000] /dev/vmnet: port on hub 0 successfully opened
[ 33.104000] bridge-eth0: enabling the bridge
[ 33.104000] bridge-eth0: up
[ 33.104000] bridge-eth0: already up
[ 33.104000] bridge-eth0: attached
[ 33.356000] /dev/vmnet: open called by PID 5658 (vmnet-netifup)
[ 33.356000] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 33.356000] /dev/vmnet: port on hub 1 successfully opened
[ 33.552000] /dev/vmnet: open called by PID 5657 (vmnet-dhcpd)
[ 33.552000] /dev/vmnet: port on hub 1 successfully opened
[ 33.568000] /dev/vmnet: open called by PID 5680 (vmnet-netifup)
[ 33.568000] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 33.568000] /dev/vmnet: port on hub 8 successfully opened
[ 33.600000] /dev/vmnet: open called by PID 5679 (vmnet-dhcpd)
[ 33.600000] /dev/vmnet: port on hub 8 successfully opened
[ 33.628000] /dev/vmnet: open called by PID 5695 (vmnet-natd)
[ 33.628000] /dev/vmnet: port on hub 8 successfully opened
[ 34.616000] [fglrx] total GART = 130023424
[ 34.616000] [fglrx] free GART = 114032640
[ 34.616000] [fglrx] max single GART = 114032640
[ 34.616000] [fglrx] total LFB = 268304384
[ 34.616000] [fglrx] free LFB = 250089472
[ 34.616000] [fglrx] max single LFB = 250089472
[ 34.616000] [fglrx] total Inv = 0
[ 34.616000] [fglrx] free Inv = 0
[ 34.616000] [fglrx] max single Inv = 0
[ 34.616000] [fglrx] total TIM = 0
[ 36.000000] Clocksource tsc unstable (delta = -163199353 ns)
[ 36.640000] appletouch: incomplete data package (first byte: 2, length: 4).
[ 63.536000] NET: Registered protocol family 17
[ 97.616000] NET: Registered protocol family 10
[ 97.616000] lo: Disabled Privacy Extensions
[ 97.616000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 107.732000] ath0: no IPv6 routers present
[ 107.984000] vmnet1: no IPv6 routers present
[ 108.072000] vmnet8: no IPv6 routers present
[ 822.980000] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 823.176000] usb 3-1: configuration #1 chosen from 1 choice
[ 823.224000] input: HID 1241:1177 as /class/input/input11
[ 823.224000] input: USB HID v1.10 Mouse [HID 1241:1177] on usb-0000:00:1d.1-1
Re: [Video] Problemi con webcam integrata....HELP ME!!!
@voyevoda e ilbudda
quando postate cose molto lunghe sarebbe meglio usare il tag code
questo lo trovate sopre le faccine e corrisponde a questo simbolo # il cancelletto
risulta più facile leggere
@voyevoda
ho guardato con google ma sembra molto difficile far funzionare la tua webcam su ubuntu
prova a fare una ricerca con google mettendo il risultato di lsub che riguarda la tua webcam
e poi prova le guide che dicono come installare i driver
io di più non riesco a fare
@ilbudda
sinceramente nemmeno io ma proverei a mettere tramite google le voci
una per volta e vedere se ti dice qual'è la tua webcam
quando postate cose molto lunghe sarebbe meglio usare il tag code
questo lo trovate sopre le faccine e corrisponde a questo simbolo # il cancelletto
risulta più facile leggere
@voyevoda
ho guardato con google ma sembra molto difficile far funzionare la tua webcam su ubuntu
prova a fare una ricerca con google mettendo il risultato di lsub che riguarda la tua webcam
Codice: Seleziona tutto
ID 0402:5602 ALi Corp.io di più non riesco a fare
@ilbudda
sinceramente nemmeno io ma proverei a mettere tramite google le voci
Codice: Seleziona tutto
ID 05ac:8240 Apple Computer, Inc
ID 05ac:021b Apple Computer, Inc.
ID 05ac:8205 Apple Computer, Inc.
ID 05ac:8300 Apple Computer, Inc. Massimiliano Ubuntu user # 16155
Potrete ingannare tutti per un po'. Potrete ingannare qualcuno per sempre.
Ma non potrete ingannare tutti per sempre [Abramo Lincoln]
Potrete ingannare tutti per un po'. Potrete ingannare qualcuno per sempre.
Ma non potrete ingannare tutti per sempre [Abramo Lincoln]
Re: [Video] Problemi con webcam integrata....HELP ME!!!
Grazie maxfact...v faro sapere ulteriori novita...ubuntu forever!!!!! (good)
-
VonNeumann
- Prode Principiante
- Messaggi: 80
- Iscrizione: mercoledì 7 giugno 2006, 19:01
- Località: Ancona
Re: [Video] Problemi con webcam integrata....HELP ME!!!
purtroppo è la webcam che sta dando molti problemi a moltissimi utilizzatori di portatili Asus. A tutt'ora non sò se sono stati rilasciati i driver..voyevoda ha scritto: Questa è la risposta:
vojevoda@vojevoda-laptop:~$ lsusb
Bus 005 Device 003: ID 0402:5602 ALi Corp.
Bus 005 Device 001: ID 0000:0000
Bus 002 Device 004: ID 046d:c03d Logitech, Inc.
Bus 002 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Considerando il fatto che ho un mouse della logitec...
il portatile è un Asus giusto? che modello?
«La verità è una cosa troppo complicata perchè permetta qualcosa di differente dalle approssimazioni.»
Re: [Video] Problemi con webcam integrata....HELP ME!!!
@ilbudda
forse la tua webcam dovrebbe funzionare coi driver uvc
prova a fare cosi
prima installi i build-essential e il pacchetto subversion
svn checkout svn://svn.berlios.de/linux-uvc/linux-uvc/trunk
poi
cd ~/trunk
poi
make
poi
sudo make install
poi
sudo depmod -ae
dopo
sudo nano /etc/modules
ed aggiungi
uvcvideo
forse la tua webcam dovrebbe funzionare coi driver uvc
prova a fare cosi
prima installi i build-essential e il pacchetto subversion
svn checkout svn://svn.berlios.de/linux-uvc/linux-uvc/trunk
poi
cd ~/trunk
poi
make
poi
sudo make install
poi
sudo depmod -ae
dopo
sudo nano /etc/modules
ed aggiungi
uvcvideo
Massimiliano Ubuntu user # 16155
Potrete ingannare tutti per un po'. Potrete ingannare qualcuno per sempre.
Ma non potrete ingannare tutti per sempre [Abramo Lincoln]
Potrete ingannare tutti per un po'. Potrete ingannare qualcuno per sempre.
Ma non potrete ingannare tutti per sempre [Abramo Lincoln]
Re: [Video] Problemi con webcam integrata....HELP ME!!!
::) niente di niente non va....questo mac bookre! mi sta uccidendo!!!!nemmeno il microfono per skype riesco a farlo partire!
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 9 ospiti