Forum Ubuntu-it

Salve a tutti!!!...ho un problemino con la webcam integrata del mio pc...il mio pc è un packard bell easynote mx45006...praticamente dopo aver installato cheese e una volta fatto partire ho notato che dalla mia web nn s vedeva niente...grigiore assoluto, come se nn fosse connessa...ho letto alcuni topic e ho provato a dare il comando lsusb per vedere quali e quante periferiche attive c sono,ma niente da fare...sembra nn la riveli neanche come se nn fosse accesa...finora nn me ne sono mai accorto in quanto nn l'ho mai usata...qualcuno a suggerimenti?

inzia intanto col verificare se viene riconosciuta... dai un dmesg e vedi che ti viene fuori...potrebbe essere un problema di driver, in tal caso solo conoscendo il modello della webcam si può stabilire come procedere...

Per curiosita, questo comando di fa conoscere ttt le specifiche del pc?

Nn riesco a trovare nulla che m dica quale modello/driver monto...t posto qui il risultato della ricerca...se puoi darmi una mano nel trovare cio che m serve te ne sarei davvero grato...
[  11.303312] Calibrating delay using timer specific routine.. 3462.15 BogoMIPS (lpj=6924305)
[  11.303335] Security Framework v1.0.0 initialized
[  11.303343] SELinux:  Disabled at boot.
[  11.303357] Mount-cache hash table entries: 512
[  11.303474] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[  11.303483] monitor/mwait feature present.
[  11.303485] using mwait in idle threads.
[  11.303489] CPU: L1 I cache: 32K, L1 D cache: 32K
[  11.303492] CPU: L2 cache: 2048K
[  11.303494] CPU: Physical Processor ID: 0
[  11.303496] CPU: Processor Core ID: 0
[  11.303498] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000
[  11.303507] Compat vDSO mapped to ffffe000.
[  11.303520] Checking 'hlt' instruction... OK.
[  11.319413] SMP alternatives: switching to UP code
[  11.319842] Early unpacking initramfs... done
[  11.656543] ACPI: Core revision 20070126
[  11.656620] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[  11.676516] CPU0: Intel Genuine Intel(R) CPU          T2250  @ 1.73GHz stepping 08
[  11.676535] SMP alternatives: switching to SMP code
[  11.676659] Booting processor 1/1 eip 3000
[  11.686912] Initializing CPU#1
[  11.767142] Calibrating delay using timer specific routine.. 3458.30 BogoMIPS (lpj=6916616)
[  11.767149] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[  11.767154] monitor/mwait feature present.
[  11.767157] CPU: L1 I cache: 32K, L1 D cache: 32K
[  11.767159] CPU: L2 cache: 2048K
[  11.767162] CPU: Physical Processor ID: 0
[  11.767163] CPU: Processor Core ID: 1
[  11.767165] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000
[  11.767718] CPU1: Intel Genuine Intel(R) CPU          T2250  @ 1.73GHz stepping 08
[  11.767741] Total of 2 processors activated (6920.46 BogoMIPS).
[  11.767940] ENABLING IO-APIC IRQs
[  11.768145] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[  11.915198] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[  11.935210] Brought up 2 CPUs
[  12.000599] migration_cost=47
[  12.000745] Booting paravirtualized kernel on bare hardware
[  12.000822] Time: 10:03:59  Date: 01/24/108
[  12.000844] NET: Registered protocol family 16
[  12.000935] EISA bus registered
[  12.000939] ACPI: bus type pci registered
[  12.001137] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[  12.001140] PCI: Using configuration type 1
[  12.001142] Setting up standard PCI resources
[  12.004774] ACPI: EC: Look up EC in DSDT
[  12.005292] ACPI: EC: GPE=0x1c, ports=0x66, 0x62
[  12.009862] APIC error on CPU1: 00(40)
[  12.056622] ACPI: Interpreter enabled
[  12.056625] ACPI: (supports S0 S3 S4 S5)
[  12.056646] ACPI: Using IOAPIC for interrupt routing
[  12.064530] ACPI: EC: GPE=0x1c, ports=0x66, 0x62
[  12.064661] ACPI: PCI Root Bridge [PCI0] (0000:00)
[  12.064674] PCI: Probing PCI hardware (bus 00)
[  12.065402] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[  12.065407] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[  12.066376] PCI: Transparent bridge - 0000:00:1e.0
[  12.066440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[  12.066635] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[  12.066744] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[  12.066859] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[  12.078359] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
[  12.078509] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 12)
[  12.078657] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 12)
[  12.078805] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 12)
[  12.078952] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
[  12.079127] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 12)
[  12.079275] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 12)
[  12.079422] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 12)
[  12.079543] Linux Plug and Play Support v0.97 (c) Adam Belay
[  12.079554] pnp: PnP ACPI init
[  12.079561] ACPI: bus type pnp registered
[  12.081520] pnp: PnP ACPI: found 12 devices
[  12.081523] ACPI: ACPI bus type pnp unregistered
[  12.081527] PnPBIOS: Disabled by ACPI PNP
[  12.081572] PCI: Using ACPI for IRQ routing
[  12.081575] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[  12.095808] NET: Registered protocol family 8
[  12.095810] NET: Registered protocol family 20
[  12.095862] pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[  12.095871] pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[  12.095874] pnp: 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[  12.095877] pnp: 00:08: iomem range 0xfed45000-0xfed89fff has been reserved
[  12.095880] pnp: 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
[  12.095885] pnp: 00:09: ioport range 0x400-0x41f has been reserved
[  12.095888] pnp: 00:09: ioport range 0x250-0x25f has been reserved
[  12.095891] pnp: 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[  12.095895] pnp: 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
[  12.095898] pnp: 00:09: iomem range 0xfec18000-0xfec1ffff has been reserved
[  12.095901] pnp: 00:09: iomem range 0xfec20000-0xfec27fff has been reserved
[  12.095906] pnp: 00:0a: iomem range 0xe0000000-0xe3ffffff has been reserved
[  12.095911] pnp: 00:0b: iomem range 0x0-0x9ffff could not be reserved
[  12.095914] pnp: 00:0b: iomem range 0xc0000-0xcffff could not be reserved
[  12.095917] pnp: 00:0b: iomem range 0xe0000-0xfffff could not be reserved
[  12.095921] pnp: 00:0b: iomem range 0x100000-0x3f7fffff could not be reserved
[  12.099043] Time: tsc clocksource has been installed.
[  12.126210] PCI: Bridge: 0000:00:1c.0
[  12.126211]  IO window: disabled.
[  12.126217]  MEM window: disabled.
[  12.126222]  PREFETCH window: disabled.
[  12.126228] PCI: Bridge: 0000:00:1c.1
[  12.126230]  IO window: disabled.
[  12.126236]  MEM window: ff200000-ff2fffff
[  12.126240]  PREFETCH window: disabled.
[  12.126247] PCI: Bridge: 0000:00:1e.0
[  12.126250]  IO window: d000-dfff
[  12.126256]  MEM window: ff300000-ff3fffff
[  12.126261]  PREFETCH window: disabled.
[  12.126291] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[  12.126298] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[  12.126322] ACPI: PCI Interrupt 0000:00:1c.1 -> GSI 17 (level, low) -> IRQ 17
[  12.126328] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[  12.126343] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[  12.126355] NET: Registered protocol family 2
[  12.163047] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[  12.163112] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[  12.164167] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[  12.164549] TCP: Hash tables configured (established 131072 bind 65536)
[  12.164552] TCP reno registered
[  12.175163] checking if image is initramfs... it is
[  12.622976] Switched to high resolution mode on CPU 1
[  12.626856] Switched to high resolution mode on CPU 0
[  12.842898] Freeing initrd memory: 7048k freed
[  12.843017] Simple Boot Flag at 0x52 set to 0x1
[  12.843530] audit: initializing netlink socket (disabled)
[  12.843546] audit(1203847440.208:1): initialized
[  12.843644] highmem bounce pool size: 64 pages
[  12.845698] VFS: Disk quotas dquot_6.5.1
[  12.845747] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[  12.845839] io scheduler noop registered
[  12.845841] io scheduler anticipatory registered
[  12.845844] io scheduler deadline registered
[  12.845858] io scheduler cfq registered (default)
[  12.845874] Boot video device is 0000:00:02.0
[  12.846046] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[  12.846105] assign_interrupt_mode Found MSI capability
[  12.846108] Allocate Port Service[0000:00:1c.0:pcie00]
[  12.846147] Allocate Port Service[0000:00:1c.0:pcie02]
[  12.846249] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[  12.846307] assign_interrupt_mode Found MSI capability
[  12.846310] Allocate Port Service[0000:00:1c.1:pcie00]
[  12.846343] Allocate Port Service[0000:00:1c.1:pcie02]
[  12.846507] isapnp: Scanning for PnP cards...
[  13.200275] isapnp: No Plug & Play device found
[  13.224132] Real Time Clock Driver v1.12ac
[  13.224253] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[  13.225409] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[  13.225539] input: Macintosh mouse button emulation as /class/input/input0
[  13.225624] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[  13.227744] i8042.c: Detected active multiplexing controller, rev 1.1.
[  13.228922] serio: i8042 KBD port at 0x60,0x64 irq 1
[  13.228927] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[  13.228931] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[  13.228934] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[  13.228936] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[  13.229085] mice: PS/2 mouse device common for all mice
[  13.229214] EISA: Probing bus 0 at eisa.0
[  13.229258] EISA: Detected 0 cards.
[  13.229351] TCP cubic registered
[  13.229368] NET: Registered protocol family 1
[  13.229390] Using IPI No-Shortcut mode
[  13.229571]  Magic number: 12:350:73
[  13.229918] Freeing unused kernel memory: 364k freed
[  13.266587] input: AT Translated Set 2 keyboard as /class/input/input1
[  14.437938] AppArmor: AppArmor initializedaudit(1203847441.708:2):  type=1505 info="AppArmor initialized" pid=1226
[  14.445986] fuse init (API version 7.
[  14.451401] Failure registering capabilities with primary security module.
[  14.474846] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  5F, should be 24 [20070126]
[  14.474854] ACPI: SSDT 3F7D7AC0, 0382 (r1    AMI  CPU1PM        1 INTL  2002026)
[  14.475198] ACPI: CPU0 (power states: C1[C1] C2[C2])
[  14.475202] ACPI: Processor [CPU1] (supports 8 throttling states)
[  14.475251] ACPI Warning (tbutils-0217): Incorrect checksum in table [SSDT] -  10, should be 6C [20070126]
[  14.475256] ACPI: SSDT 3F7D7E50, 0382 (r1    AMI  CPU2PM        1 INTL  2002026)
[  14.475556] ACPI: CPU1 (power states: C1[C1] C2[C2])
[  14.475560] ACPI: Processor [CPU2] (supports 8 throttling states)
[    3.088000] Marking TSC unstable due to: possible TSC halt in C2.
[    3.092000] Time: acpi_pm clocksource has been installed.
[    3.092000] ACPI: Thermal Zone [THRM] (25 C)
[    3.548000] usbcore: registered new interface driver usbfs
[    3.552000] usbcore: registered new interface driver hub
[    3.552000] usbcore: registered new device driver usb
[    3.552000] USB Universal Host Controller Interface driver v3.0
[    3.552000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
[    3.552000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    3.552000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.552000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    3.552000] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000e880
[    3.552000] usb usb1: configuration #1 chosen from 1 choice
[    3.552000] hub 1-0:1.0: USB hub found
[    3.552000] hub 1-0:1.0: 2 ports detected
[    3.588000] SCSI subsystem initialized
[    3.596000] libata version 2.21 loaded.
[    3.624000] 8139too Fast Ethernet driver 0.9.28
[    3.656000] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 19
[    3.656000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    3.656000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.656000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    3.656000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800
[    3.656000] usb usb2: configuration #1 chosen from 1 choice
[    3.656000] hub 2-0:1.0: USB hub found
[    3.656000] hub 2-0:1.0: 2 ports detected
[    3.760000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[    3.760000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    3.760000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.760000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    3.760000] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000e480
[    3.760000] usb usb3: configuration #1 chosen from 1 choice
[    3.760000] hub 3-0:1.0: USB hub found
[    3.760000] hub 3-0:1.0: 2 ports detected
[    3.864000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 21
[    3.864000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[    3.864000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    3.864000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    3.864000] uhci_hcd 0000:00:1d.3: irq 21, io base 0x0000e400
[    3.864000] usb usb4: configuration #1 chosen from 1 choice
[    3.864000] hub 4-0:1.0: USB hub found
[    3.864000] hub 4-0:1.0: 2 ports detected
[    3.968000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
[    3.968000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    3.968000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.968000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    3.968000] ehci_hcd 0000:00:1d.7: debug port 1
[    3.968000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    3.968000] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xff63bc00
[    4.000000] usb 2-2: new low speed USB device using uhci_hcd and address 2
[    4.000000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    4.000000] usb usb5: configuration #1 chosen from 1 choice
[    4.000000] hub 5-0:1.0: USB hub found
[    4.000000] hub 5-0:1.0: 8 ports detected
[    4.104000] ata_piix 0000:00:1f.1: version 2.11
[    4.104000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20
[    4.104000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[    4.104000] scsi0 : ata_piix
[    4.104000] scsi1 : ata_piix
[    4.104000] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
[    4.104000] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
[    4.572000] ata1.00: ATA-6: ST9100828A, 3.ALA, max UDMA/100
[    4.572000] ata1.00: 195371568 sectors, multi 16: LBA48
[    4.572000] ata1.01: ATAPI: Slimtype DVDRW SOSW-833S, V9S2, max UDMA/33
[    4.588000] ata1.00: configured for UDMA/100
[    4.616000] usb 5-5: new high speed USB device using ehci_hcd and address 3
[    4.756000] usb 5-5: configuration #1 chosen from 1 choice
[    4.760000] ata1.01: configured for UDMA/33
[    4.760000] ata2: port disabled. ignoring.
[    4.764000] scsi 0:0:0:0: Direct-Access    ATA      ST9100828A      3.AL PQ: 0 ANSI: 5
[    4.764000] scsi 0:0:1:0: CD-ROM            Slimtype DVDRW SOSW-833S  V9S2 PQ: 0 ANSI: 5
[    4.764000] ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 16 (level, low) -> IRQ 16
[    4.768000] eth0: RealTek RTL8139 at 0xf8868c00, 00:18:f3:32:34:93, IRQ 16
[    4.768000] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[    4.768000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    4.776000] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[    4.776000] sd 0:0:0:0: [sda] Write Protect is off
[    4.776000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.776000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.776000] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[    4.776000] sd 0:0:0:0: [sda] Write Protect is off
[    4.776000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.776000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.776000]  sda: sda1 sda2 sda3
[    4.820000] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.824000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.824000] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    4.828000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    4.828000] Uniform CD-ROM driver Revision: 3.20
[    4.828000] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    4.996000] usb 2-2: new low speed USB device using uhci_hcd and address 3
[    5.140000] Attempting manual resume
[    5.140000] swsusp: Resume From Partition 8:3
[    5.140000] PM: Checking swsusp image.
[    5.140000] PM: Resume from disk failed.
[    5.172000] usb 2-2: configuration #1 chosen from 1 choice
[    5.180000] kjournald starting.  Commit interval 5 seconds
[    5.180000] EXT3-fs: mounted filesystem with ordered data mode.
[    5.184000] usbcore: registered new interface driver hiddev
[    5.196000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
[    5.196000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2
[    5.196000] usbcore: registered new interface driver usbhid
[    5.196000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[  11.880000] eth0: link down
[  12.768000] NET: Registered protocol family 10
[  12.768000] lo: Disabled Privacy Extensions
[  12.768000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  12.908000] intel_rng: FWH not detected
[  12.920000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[  12.924000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  12.968000] iTCO_vendor_support: vendor-support=0
[  12.968000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[  12.968000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0860)
[  12.968000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[  13.052000] Linux agpgart interface v0.102 (c) Dave Jones
[  13.196000] agpgart: Detected an Intel 945GM Chipset.
[  13.196000] agpgart: Detected 7932K stolen memory.
[  13.212000] agpgart: AGP aperture is 256M @ 0xd0000000
[  13.284000] input: PC Speaker as /class/input/input3
[  13.364000] sdhci: Secure Digital Host Controller Interface driver
[  13.364000] sdhci: Copyright(c) Pierre Ossman
[  13.364000] sdhci: SDHCI controller found at 0000:03:01.0 [1180:0822] (rev 19)
[  13.364000] ACPI: PCI Interrupt 0000:03:01.0 -> GSI 18 (level, low) -> IRQ 20
[  13.364000] mmc0: SDHCI at 0xff3ffc00 irq 20 DMA
[  13.516000] ieee80211_crypt: registered algorithm 'NULL'
[  13.524000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[  13.524000] ieee80211: Copyright (C) 2004-2005 Intel Corporation
[  13.600000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1
[  13.600000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[  13.600000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[  13.600000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[  13.600000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[  13.804000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 22
[  13.804000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[  13.808000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x3aa0b4, caps: 0xa04713/0x200000
[  13.848000] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[  14.804000] lp: driver loaded but no devices found
[  14.844000] Adding 1951888k swap on /dev/sda3.  Priority:-1 extents:1 across:1951888k
[  15.256000] EXT3 FS on sda2, internal journal
[  15.472000] ipw3945: Radio Frequency Kill Switch is On:
[  15.472000] Kill switch must be turned off for wireless networking to work.
[  16.860000] PPP generic driver version 2.4.2
[  16.892000] NET: Registered protocol family 17
[  17.152000] ACPI: Battery Slot [BAT0] (battery absent)
[  17.316000] ACPI: AC Adapter [AC0] (on-line)
[  17.344000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[  17.360000] input: Power Button (FF) as /class/input/input5
[  17.360000] ACPI: Power Button (FF) [PWRF]
[  17.360000] input: Lid Switch as /class/input/input6
[  17.360000] ACPI: Lid Switch [liD]
[  17.360000] input: Power Button (CM) as /class/input/input7
[  17.360000] ACPI: Power Button (CM) [PWRB]
[  17.360000] input: Sleep Button (CM) as /class/input/input8
[  17.360000] ACPI: Sleep Button (CM) [SLPB]
[  17.432000] No dock devices found.
[  17.512000] Asus Laptop ACPI Extras version 0.30
[  17.516000]  unsupported model T12F, trying default values
[  17.516000]  send /proc/acpi/dsdt to the developers
[  18.712000] ppdev: user-space parallel port driver
[  18.952000] audit(1203843857.924:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4907 profile="/usr/sbin/cupsd"
[  19.012000] apm: BIOS not found.
[  19.304000] Failure registering capabilities with primary security module.
[  19.528000] Bluetooth: Core ver 2.11
[  19.528000] NET: Registered protocol family 31
[  19.528000] Bluetooth: HCI device and connection manager initialized
[  19.528000] Bluetooth: HCI socket layer initialized
[  19.548000] Bluetooth: L2CAP ver 2.8
[  19.548000] Bluetooth: L2CAP socket layer initialized
[  19.624000] Bluetooth: RFCOMM socket layer initialized
[  19.624000] Bluetooth: RFCOMM TTY layer initialized
[  19.624000] Bluetooth: RFCOMM ver 1.8
[  24.452000] [drm] Initialized drm 1.1.0 20060810
[  24.452000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[  24.452000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[  352.932000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  352.936000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  363.472000] eth0: no IPv6 routers present
[  407.424000] NET: Registered protocol family 24
[  408.960000] ip_tables: (C) 2000-2006 Netfilter Core Team
[  480.432000] usb 5-2: new high speed USB device using ehci_hcd and address 4
[  480.564000] usb 5-2: configuration #1 chosen from 1 choice
[  480.660000] usbcore: registered new interface driver libusual
[  480.708000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[  480.708000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[  480.716000] Initializing USB Mass Storage driver...
[  480.716000] scsi2 : SCSI emulation for USB Mass Storage devices
[  480.716000] usb-storage: device found at 4
[  480.716000] usb-storage: waiting for device to settle before scanning
[  480.716000] usbcore: registered new interface driver usb-storage
[  480.716000] USB Mass Storage support registered.
[  485.716000] usb-storage: device scan complete
[  485.716000] scsi 2:0:0:0: Direct-Access    Samsung  YP-U1            0100 PQ: 0 ANSI: 4
[  485.716000] sd 2:0:0:0: [sdb] 254720 2048-byte hardware sectors (522 MB)
[  485.716000] sd 2:0:0:0: [sdb] Write Protect is off
[  485.716000] sd 2:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[  485.716000] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  485.720000] sd 2:0:0:0: [sdb] 254720 2048-byte hardware sectors (522 MB)
[  485.724000] sd 2:0:0:0: [sdb] Write Protect is off
[  485.724000] sd 2:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[  485.724000] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  485.724000]  sdb: sdb1
[  485.724000] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[  485.724000] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1320.144000] usb 5-2: USB disconnect, address 4
[ 1320.216000] scsi 2:0:0:0: rejecting I/O to dead device
[ 1320.936000] usb 5-2: new high speed USB device using ehci_hcd and address 5
[ 1321.068000] usb 5-2: configuration #1 chosen from 1 choice
[ 1321.068000] scsi3 : SCSI emulation for USB Mass Storage devices
[ 1321.068000] usb-storage: device found at 5
[ 1321.068000] usb-storage: waiting for device to settle before scanning
[ 1323.316000] usb 5-1: new high speed USB device using ehci_hcd and address 6
[ 1323.448000] usb 5-1: configuration #1 chosen from 1 choice
[ 1323.448000] scsi4 : SCSI emulation for USB Mass Storage devices
[ 1323.448000] usb-storage: device found at 6
[ 1323.448000] usb-storage: waiting for device to settle before scanning
[ 1326.068000] usb-storage: device scan complete
[ 1326.068000] scsi 3:0:0:0: Direct-Access    Samsung  YP-U1            0100 PQ: 0 ANSI: 4
[ 1326.068000] sd 3:0:0:0: [sdb] 254720 2048-byte hardware sectors (522 MB)
[ 1326.068000] sd 3:0:0:0: [sdb] Write Protect is off
[ 1326.068000] sd 3:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 1326.068000] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 1326.072000] sd 3:0:0:0: [sdb] 254720 2048-byte hardware sectors (522 MB)
[ 1326.072000] sd 3:0:0:0: [sdb] Write Protect is off
[ 1326.072000] sd 3:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 1326.072000] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 1326.072000]  sdb: sdb1
[ 1326.076000] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 1326.076000] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1328.448000] usb-storage: device scan complete
[ 1328.448000] scsi 4:0:0:0: Direct-Access    Ext Hard  Disk                PQ: 0 ANSI: 4
[ 1328.448000] sd 4:0:0:0: [sdc] 234441648 512-byte hardware sectors (120034 MB)
[ 1328.448000] sd 4:0:0:0: [sdc] Write Protect is off
[ 1328.448000] sd 4:0:0:0: [sdc] Mode Sense: 10 00 00 00
[ 1328.448000] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 1328.448000] sd 4:0:0:0: [sdc] 234441648 512-byte hardware sectors (120034 MB)
[ 1328.448000] sd 4:0:0:0: [sdc] Write Protect is off
[ 1328.448000] sd 4:0:0:0: [sdc] Mode Sense: 10 00 00 00
[ 1328.448000] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 1328.448000]  sdc: sdc1
[ 1328.472000] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 1328.472000] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 1464.780000] usb 5-2: USB disconnect, address 5
[ 1466.564000] usb 5-2: new high speed USB device using ehci_hcd and address 7
[ 1466.696000] usb 5-2: configuration #1 chosen from 1 choice
[ 1466.696000] scsi5 : SCSI emulation for USB Mass Storage devices
[ 1466.696000] usb-storage: device found at 7
[ 1466.696000] usb-storage: waiting for device to settle before scanning
[ 1471.696000] usb-storage: device scan complete
[ 1471.696000] scsi 5:0:0:0: Direct-Access    Samsung  YP-U1            0100 PQ: 0 ANSI: 4
[ 1471.696000] sd 5:0:0:0: [sdb] 254720 2048-byte hardware sectors (522 MB)
[ 1471.696000] sd 5:0:0:0: [sdb] Write Protect is off
[ 1471.696000] sd 5:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 1471.696000] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 1471.700000] sd 5:0:0:0: [sdb] 254720 2048-byte hardware sectors (522 MB)
[ 1471.700000] sd 5:0:0:0: [sdb] Write Protect is off
[ 1471.700000] sd 5:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 1471.700000] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 1471.700000]  sdb: sdb1
[ 1471.704000] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 1471.704000] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 4999.700000] usb 5-1: USB disconnect, address 6
[ 5000.556000] usb 5-2: USB disconnect, address 7
[ 5432.004000] usb 2-2: USB disconnect, address 3

dai il comando
lsusb

Questa è la risposta:

vojevoda@vojevoda-laptop:~$ lsusb
Bus 005 Device 003: ID 0402:5602 ALi Corp.
Bus 005 Device 001: ID 0000:0000 
Bus 002 Device 004: ID 046d:c03d Logitech, Inc.
Bus 002 Device 001: ID 0000:0000 
Bus 004 Device 001: ID 0000:0000 
Bus 001 Device 001: ID 0000:0000 
Bus 003 Device 001: ID 0000:0000 

Considerando il fatto che ho un mouse della logitec...

Raga ho lo stesso problema  con un macbook pro do il comando lsusb e mi esce questo:
Bus 004 Device 002: ID 05ac:8240 Apple Computer, Inc.
Bus 004 Device 001: ID 0000:0000 
Bus 001 Device 002: ID 05ac:021b Apple Computer, Inc.
Bus 001 Device 001: ID 0000:0000 
Bus 003 Device 002: ID 1241:1177 Belkin F8E842-DL Mouse
Bus 003 Device 001: ID 0000:0000 
Bus 005 Device 003: ID 05ac:8205 Apple Computer, Inc.
Bus 005 Device 001: ID 0000:0000 
Bus 002 Device 003: ID 05ac:8300 Apple Computer, Inc.
Bus 002 Device 001: ID 0000:0000
non so quale sia la cam;

e questo è il mio dmsg:
[  50.203410] CPU: Physical Processor ID: 0
[  50.203411] CPU: Processor Core ID: 0
[  50.203412] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[  50.203420] Compat vDSO mapped to ffffe000.
[  50.203431] Checking 'hlt' instruction... OK.
[  50.219312] SMP alternatives: switching to UP code
[  50.219913] Early unpacking initramfs... done
[  50.462959] ACPI: Core revision 20070126
[  50.462993] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[  50.464608] CPU0: Intel(R) Core(TM)2 CPU        T7600  @ 2.33GHz stepping 06
[  50.464621] SMP alternatives: switching to SMP code
[  50.464687] Booting processor 1/1 eip 3000
[  50.475061] Initializing CPU#1
[  50.554482] Calibrating delay using timer specific routine.. 4655.04 BogoMIPS (lpj=9310089)
[  50.554487] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[  50.554490] monitor/mwait feature present.
[  50.554493] CPU: L1 I cache: 32K, L1 D cache: 32K
[  50.554494] CPU: L2 cache: 4096K
[  50.554496] CPU: Physical Processor ID: 0
[  50.554497] CPU: Processor Core ID: 1
[  50.554498] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[  50.555129] CPU1: Intel(R) Core(TM)2 CPU        T7600  @ 2.33GHz stepping 06
[  50.555148] Total of 2 processors activated (9315.02 BogoMIPS).
[  50.555340] ENABLING IO-APIC IRQs
[  50.555533] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[  50.702233] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[  50.722202] Brought up 2 CPUs
[  50.842024] migration_cost=42
[  50.842129] Booting paravirtualized kernel on bare hardware
[  50.842210] Time: 10:07:16  Date: 01/24/108
[  50.842226] NET: Registered protocol family 16
[  50.842291] EISA bus registered
[  50.842294] ACPI: bus type pci registered
[  50.842431] PCI: Using configuration type 1
[  50.842432] Setting up standard PCI resources
[  50.843626] ACPI: EC: Found ECDT
[  50.845150] ACPI: System BIOS is requesting _OSI(Linux)
[  50.845152] ACPI: Please test with "acpi_osi=!Linux"
[  50.845153] Please send dmidecode to linux-acpi@vger.kernel.org
[  50.845468] ACPI: Interpreter enabled
[  50.845471] ACPI: (supports S0 S3 S4 S5)
[  50.845483] ACPI: Using IOAPIC for interrupt routing
[  50.854839] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[  50.855039] ACPI: PCI Root Bridge [PCI0] (0000:00)
[  50.855051] PCI: Probing PCI hardware (bus 00)
[  50.855739] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[  50.855743] PCI quirk: region 0500-053f claimed by ICH6 GPIO
[  50.857092] PCI: Transparent bridge - 0000:00:1e.0
[  50.857171] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[  50.857373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[  50.857459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[  50.857543] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[  50.857624] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[  50.857713] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[  50.863396] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[  50.863463] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[  50.863528] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[  50.863593] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[  50.863657] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[  50.863724] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[  50.863789] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[  50.863853] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[  50.863943] Linux Plug and Play Support v0.97 (c) Adam Belay
[  50.863950] pnp: PnP ACPI init
[  50.863956] ACPI: bus type pnp registered
[  50.867045] pnp: PnP ACPI: found 9 devices
[  50.867047] ACPI: ACPI bus type pnp unregistered
[  50.867050] PnPBIOS: Disabled by ACPI PNP
[  50.867131] PCI: Using ACPI for IRQ routing
[  50.867132] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[  50.867242] NET: Registered protocol family 8
[  50.867244] NET: Registered protocol family 20
[  50.867279] pnp: 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved
[  50.867282] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[  50.867284] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[  50.867286] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[  50.867291] pnp: 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
[  50.869799] Time: tsc clocksource has been installed.
[  50.869805] Switched to high resolution mode on CPU 0
[  50.869877] Switched to high resolution mode on CPU 1
[  50.897460] PCI: Bridge: 0000:00:01.0
[  50.897462]  IO window: 3000-3fff
[  50.897465]  MEM window: 98300000-983fffff
[  50.897468]  PREFETCH window: 80000000-8fffffff
[  50.897471] PCI: Bridge: 0000:00:1c.0
[  50.897474]  IO window: 2000-2fff
[  50.897479]  MEM window: 98200000-982fffff
[  50.897483]  PREFETCH window: 98500000-985fffff
[  50.897488] PCI: Bridge: 0000:00:1c.1
[  50.897489]  IO window: disabled.
[  50.897495]  MEM window: 98100000-981fffff
[  50.897499]  PREFETCH window: disabled.
[  50.897504] PCI: Bridge: 0000:00:1c.2
[  50.897506]  IO window: 1000-1fff
[  50.897511]  MEM window: 94100000-980fffff
[  50.897515]  PREFETCH window: 90000000-93ffffff
[  50.897521] PCI: Bridge: 0000:00:1e.0
[  50.897522]  IO window: disabled.
[  50.897527]  MEM window: 94000000-940fffff
[  50.897531]  PREFETCH window: disabled.
[  50.897544] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[  50.897548] PCI: Setting latency timer of device 0000:00:01.0 to 64
[  50.897570] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[  50.897575] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[  50.897596] ACPI: PCI Interrupt 0000:00:1c.1 -> GSI 16 (level, low) -> IRQ 16
[  50.897600] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[  50.897622] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[  50.897627] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[  50.897640] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[  50.897648] NET: Registered protocol family 2
[  50.945622] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[  50.945682] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[  50.946215] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[  50.946400] TCP: Hash tables configured (established 131072 bind 65536)
[  50.946402] TCP reno registered
[  50.961665] checking if image is initramfs... it is
[  51.427671] Freeing initrd memory: 7047k freed
[  51.428174] audit: initializing netlink socket (disabled)
[  51.428189] audit(1203847636.124:1): initialized
[  51.428269] highmem bounce pool size: 64 pages
[  51.429801] VFS: Disk quotas dquot_6.5.1
[  51.429837] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[  51.429911] io scheduler noop registered
[  51.429913] io scheduler anticipatory registered
[  51.429914] io scheduler deadline registered
[  51.429924] io scheduler cfq registered (default)
[  51.430022] Boot video device is 0000:01:00.0
[  51.430085] PCI: Setting latency timer of device 0000:00:01.0 to 64
[  51.430116] assign_interrupt_mode Found MSI capability
[  51.430119] Allocate Port Service[0000:00:01.0:pcie00]
[  51.430186] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[  51.430240] assign_interrupt_mode Found MSI capability
[  51.430242] Allocate Port Service[0000:00:1c.0:pcie00]
[  51.430266] Allocate Port Service[0000:00:1c.0:pcie02]
[  51.430353] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[  51.430407] assign_interrupt_mode Found MSI capability
[  51.430409] Allocate Port Service[0000:00:1c.1:pcie00]
[  51.430435] Allocate Port Service[0000:00:1c.1:pcie02]
[  51.430522] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[  51.430575] assign_interrupt_mode Found MSI capability
[  51.430576] Allocate Port Service[0000:00:1c.2:pcie00]
[  51.430602] Allocate Port Service[0000:00:1c.2:pcie02]
[  51.430742] isapnp: Scanning for PnP cards...
[  51.784400] isapnp: No Plug & Play device found
[  51.800581] Real Time Clock Driver v1.12ac
[  51.800776] hpet_resources: 0xfed00000 is busy
[  51.800798] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[  51.801635] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[  51.801736] input: Macintosh mouse button emulation as /class/input/input0
[  51.801832] PNP: No PS/2 controller found. Probing ports directly.
[  51.802688] i8042.c: No controller found.
[  51.802846] mice: PS/2 mouse device common for all mice
[  51.802927] EISA: Probing bus 0 at eisa.0
[  51.802933] Cannot allocate resource for EISA slot 1
[  51.802935] Cannot allocate resource for EISA slot 2
[  51.802937] Cannot allocate resource for EISA slot 3
[  51.802939] Cannot allocate resource for EISA slot 4
[  51.802956] EISA: Detected 0 cards.
[  51.803018] TCP cubic registered
[  51.803028] NET: Registered protocol family 1
[  51.803043] Using IPI No-Shortcut mode
[  51.803165]  Magic number: 12:900:123
[  51.803438] Freeing unused kernel memory: 364k freed
[  52.945580] AppArmor: AppArmor initializedaudit(1203847637.624:2):  type=1505 info="AppArmor initialized" pid=1245
[  52.954412] fuse init (API version 7.
[  52.960106] Failure registering capabilities with primary security module.
[  52.990881] ACPI: SSDT 7FEB8A90, 02F0 (r1 APPLE  Cpu0Ist    3000 INTL 20050309)
[  52.991021] ACPI: SSDT 7FEB6C10, 02A0 (r1 APPLE  Cpu0Cst    3001 INTL 20050309)
[  52.991196] Monitor-Mwait will be used to enter C-1 state
[  52.991198] Monitor-Mwait will be used to enter C-2 state
[  52.991200] Monitor-Mwait will be used to enter C-3 state
[  52.991203] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[  52.991207] ACPI: Processor [CPU0] (supports 8 throttling states)
[  52.991365] ACPI: SSDT 7FEB7F10, 0087 (r1 APPLE  Cpu1Ist    3000 INTL 20050309)
[  52.991493] ACPI: SSDT 7FEB6F10, 0085 (r1 APPLE  Cpu1Cst    3000 INTL 20050309)
[  52.993178] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[  52.993182] ACPI: Processor [CPU1] (supports 8 throttling states)
[  53.348943] usbcore: registered new interface driver usbfs
[  53.348960] usbcore: registered new interface driver hub
[  53.348976] usbcore: registered new device driver usb
[  53.349488] USB Universal Host Controller Interface driver v3.0
[  53.349551] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[  53.349568] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[  53.349573] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[  53.349672] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[  53.349735] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00004080
[  53.349829] usb usb1: configuration #1 chosen from 1 choice
[  53.349850] hub 1-0:1.0: USB hub found
[  53.349855] hub 1-0:1.0: 2 ports detected
[  53.373325] SCSI subsystem initialized
[  53.433933] libata version 2.21 loaded.
[    3.204000] Marking TSC unstable due to: possible TSC halt in C2.
[    3.208000] Time: hpet clocksource has been installed.
[    3.212000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[    3.212000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    3.212000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.212000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    3.212000] ehci_hcd 0000:00:1d.7: debug port 1
[    3.212000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    3.212000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0x98405400
[    3.216000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.216000] usb usb2: configuration #1 chosen from 1 choice
[    3.216000] hub 2-0:1.0: USB hub found
[    3.216000] hub 2-0:1.0: 8 ports detected
[    3.324000] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 20
[    3.372000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20]  MMIO=[94004000-940047ff]  Max Packet=[4096]  IR/IT contexts=[4/8]
[    3.380000] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 20
[    3.380000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    3.380000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.380000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    3.380000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00004060
[    3.380000] usb usb3: configuration #1 chosen from 1 choice
[    3.380000] hub 3-0:1.0: USB hub found
[    3.380000] hub 3-0:1.0: 2 ports detected
[    3.484000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[    3.484000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    3.484000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.484000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    3.484000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[    3.484000] usb usb4: configuration #1 chosen from 1 choice
[    3.484000] hub 4-0:1.0: USB hub found
[    3.484000] hub 4-0:1.0: 2 ports detected
[    3.588000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[    3.588000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[    3.588000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    3.588000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    3.588000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
[    3.588000] usb usb5: configuration #1 chosen from 1 choice
[    3.588000] hub 5-0:1.0: USB hub found
[    3.588000] hub 5-0:1.0: 2 ports detected
[    3.692000] ata_piix 0000:00:1f.1: version 2.11
[    3.692000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[    3.692000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[    3.692000] scsi0 : ata_piix
[    3.692000] scsi1 : ata_piix
[    3.692000] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000140b0 irq 14
[    3.692000] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x000140b8 irq 15
[    3.852000] usb 2-4: new high speed USB device using ehci_hcd and address 3
[    3.984000] usb 2-4: configuration #1 chosen from 1 choice
[    4.012000] ata1.00: ATAPI: HL-DT-ST DVDRW GWA4080MA, AE39, max UDMA/33
[    4.184000] ata1.00: configured for UDMA/33
[    4.356000] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRW GWA4080MA  AE39 PQ: 0 ANSI: 5
[    4.356000] ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ]
[    4.356000] ata_piix 0000:00:1f.2: invalid MAP value 0
[    4.512000] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 19 (level, low) -> IRQ 20
[    4.512000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    4.512000] scsi2 : ata_piix
[    4.512000] scsi3 : ata_piix
[    4.512000] ata3: SATA max UDMA/133 cmd 0x000140c8 ctl 0x000140e6 bmdma 0x000140a0 irq 20
[    4.512000] ata4: SATA max UDMA/133 cmd 0x000140c0 ctl 0x000140e2 bmdma 0x000140a8 irq 20
[    4.648000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0019e3fffe1e3404]
[    4.700000] ata3.01: ATA-8: FUJITSU MHW2120BH, 00810013, max UDMA/100
[    4.700000] ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    4.716000] ata3.01: configured for UDMA/100
[    4.836000] usb 4-2: new full speed USB device using uhci_hcd and address 2
[    4.884000] scsi 2:0:1:0: Direct-Access    ATA      FUJITSU MHW2120B 0081 PQ: 0 ANSI: 5
[    4.888000] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[    4.888000] sd 2:0:1:0: [sda] Write Protect is off
[    4.888000] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    4.888000] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.888000] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[    4.888000] sd 2:0:1:0: [sda] Write Protect is off
[    4.888000] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    4.888000] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.888000]  sda: sda1 sda2
[    4.892000] sd 2:0:1:0: [sda] Attached SCSI disk
[    4.892000] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[    4.892000] sd 2:0:1:0: Attached scsi generic sg1 type 0
[    4.956000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    4.956000] Uniform CD-ROM driver Revision: 3.20
[    4.956000] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    5.028000] usb 4-2: configuration #1 chosen from 1 choice
[    5.208000] Attempting manual resume
[    5.208000] swsusp: Resume From Partition 8:5
[    5.208000] PM: Checking swsusp image.
[    5.208000] PM: Resume from disk failed.
[    5.248000] kjournald starting.  Commit interval 5 seconds
[    5.248000] EXT3-fs: mounted filesystem with ordered data mode.
[    5.268000] usb 5-1: new full speed USB device using uhci_hcd and address 2
[    5.460000] usb 5-1: configuration #1 chosen from 1 choice
[    5.464000] usbcore: registered new interface driver hiddev
[    5.708000] usb 1-2: new full speed USB device using uhci_hcd and address 2
[    5.916000] usb 1-2: configuration #1 chosen from 1 choice
[    5.948000] input: HID 05ac:1000 as /class/input/input1
[    5.948000] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
[    5.964000] input: HID 05ac:1000 as /class/input/input2
[    5.964000] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
[    5.968000] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input3
[    5.968000] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[    5.972000] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input4
[    5.972000] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[    5.972000] usbcore: registered new interface driver usbhid
[    5.972000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[  12.576000] Linux agpgart interface v0.102 (c) Dave Jones
[  12.608000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[  12.612000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  12.864000] ath_hal: module license 'Proprietary' taints kernel.
[  12.868000] ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
[  12.980000] wlan: 0.8.4.2 (svn r2717)
[  13.016000] ath_pci: 0.9.4.5 (svn r2717)
[  13.016000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[  13.016000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[  13.152000] ath_pci: switching rfkill capability off
[  13.152000] intel_rng: FWH not detected
[  13.184000] ath_rate_sample: 1.2 (svn r2717)
[  13.184000] ath_pci: switching per-packet transmit power control off
[  13.184000] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[  13.184000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[  13.184000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[  13.184000] wifi0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[  13.184000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[  13.184000] wifi0: mac 12.10 phy 8.1 radio 12.0
[  13.184000] wifi0: Use hw queue 1 for WME_AC_BE traffic
[  13.184000] wifi0: Use hw queue 0 for WME_AC_BK traffic
[  13.184000] wifi0: Use hw queue 2 for WME_AC_VI traffic
[  13.184000] wifi0: Use hw queue 3 for WME_AC_VO traffic
[  13.184000] wifi0: Use hw queue 8 for CAB traffic
[  13.184000] wifi0: Use hw queue 9 for beacons
[  13.288000] Linux video capture interface: v2.00
[  13.332000] wifi0: Atheros 5418: mem=0x98100000, irq=17
[  13.332000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[  13.332000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[  13.332000] sky2 0000:02:00.0: v1.18 addr 0x98200000 irq 16 Yukon-EC (0xb6) rev 2
[  13.332000] sky2 eth0: addr 00:17:f2:cb:39:cb
[  13.360000] usbcore: registered new interface driver xpad
[  13.360000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6
[  13.364000] iTCO_vendor_support: vendor-support=0
[  13.368000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[  13.368000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460)
[  13.368000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[  13.456000] input: Apple Mac mini infrared remote control driver as /class/input/input5
[  13.456000] usbcore: registered new interface driver appleir
[  13.456000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/mactel/appleir.c: v1.1:USB Apple MacMini IR Receiver driver
[  13.576000] uvcvideo: iSight: firmware file AppleUSBVideoSupport not found.
[  13.576000] usbcore: registered new interface driver isight
[  13.576000] USB Video Class driver (v0.1.0)
[  13.580000] appletouch Geyser 3 inited.
[  13.580000] input: appletouch as /class/input/input6
[  13.580000] usbcore: registered new interface driver appletouch
[  13.632000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[  13.632000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[  13.796000] hda_codec: STAC922x, Apple subsys_id=106b1e00
[  14.308000] lp: driver loaded but no devices found
[  14.412000] Adding 4803392k swap on /dev/sda5.  Priority:-1 extents:1 across:4803392k
[  14.804000] EXT3 FS on sda1, internal journal
[  16.144000] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[  16.232000] ACPI: Battery Slot [BAT0] (battery present)
[  16.288000] No dock devices found.
[  16.320000] ACPI: AC Adapter [ADP1] (off-line)
[  16.400000] input: Power Button (FF) as /class/input/input7
[  16.400000] ACPI: Power Button (FF) [PWRF]
[  16.400000] input: Lid Switch as /class/input/input8
[  16.400000] ACPI: Lid Switch [liD0]
[  16.400000] input: Power Button (CM) as /class/input/input9
[  16.400000] ACPI: Power Button (CM) [PWRB]
[  16.400000] input: Sleep Button (CM) as /class/input/input10
[  16.400000] ACPI: Sleep Button (CM) [SLPB]
[  17.924000] ppdev: user-space parallel port driver
[  18.200000] sky2 eth0: enabling interface
[  18.292000] audit(1203847653.094:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5059 profile="/usr/sbin/cupsd"
[  18.352000] apm: BIOS not found.
[  19.496000] Failure registering capabilities with primary security module.
[  19.720000] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -71
[  19.876000] Bluetooth: Core ver 2.11
[  19.876000] NET: Registered protocol family 31
[  19.876000] Bluetooth: HCI device and connection manager initialized
[  19.876000] Bluetooth: HCI socket layer initialized
[  19.880000] Bluetooth: L2CAP ver 2.8
[  19.880000] Bluetooth: L2CAP socket layer initialized
[  19.964000] Bluetooth: RFCOMM socket layer initialized
[  19.964000] Bluetooth: RFCOMM TTY layer initialized
[  19.964000] Bluetooth: RFCOMM ver 1.8
[  20.004000] usb 5-1: USB disconnect, address 2
[  20.248000] usb 5-1: new full speed USB device using uhci_hcd and address 3
[  20.456000] usb 5-1: configuration #1 chosen from 1 choice
[  20.536000] Bluetooth: HCI USB driver ver 2.9
[  20.540000] usbcore: registered new interface driver hci_usb
[  32.368000] /dev/vmmon[5583]: VMCI: Driver initialized.
[  32.372000] /dev/vmmon[5583]: Module vmmon: registered with major=10 minor=165
[  32.372000] /dev/vmmon[5583]: Module vmmon: initialized
[  32.460000] [fglrx] Maximum main memory to use for locked dma buffers: 1885 MBytes.
[  32.460000] [fglrx] module loaded - fglrx 8.37.6 [May 25 2007] on minor 0
[  32.500000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[  33.104000] /dev/vmnet: open called by PID 5641 (vmnet-bridge)
[  33.104000] /dev/vmnet: hub 0 does not exist, allocating memory.
[  33.104000] /dev/vmnet: port on hub 0 successfully opened
[  33.104000] bridge-eth0: enabling the bridge
[  33.104000] bridge-eth0: up
[  33.104000] bridge-eth0: already up
[  33.104000] bridge-eth0: attached
[  33.356000] /dev/vmnet: open called by PID 5658 (vmnet-netifup)
[  33.356000] /dev/vmnet: hub 1 does not exist, allocating memory.
[  33.356000] /dev/vmnet: port on hub 1 successfully opened
[  33.552000] /dev/vmnet: open called by PID 5657 (vmnet-dhcpd)
[  33.552000] /dev/vmnet: port on hub 1 successfully opened
[  33.568000] /dev/vmnet: open called by PID 5680 (vmnet-netifup)
[  33.568000] /dev/vmnet: hub 8 does not exist, allocating memory.
[  33.568000] /dev/vmnet: port on hub 8 successfully opened
[  33.600000] /dev/vmnet: open called by PID 5679 (vmnet-dhcpd)
[  33.600000] /dev/vmnet: port on hub 8 successfully opened
[  33.628000] /dev/vmnet: open called by PID 5695 (vmnet-natd)
[  33.628000] /dev/vmnet: port on hub 8 successfully opened
[  34.616000] [fglrx] total      GART = 130023424
[  34.616000] [fglrx] free      GART = 114032640
[  34.616000] [fglrx] max single GART = 114032640
[  34.616000] [fglrx] total      LFB  = 268304384
[  34.616000] [fglrx] free      LFB  = 250089472
[  34.616000] [fglrx] max single LFB  = 250089472
[  34.616000] [fglrx] total      Inv  = 0
[  34.616000] [fglrx] free      Inv  = 0
[  34.616000] [fglrx] max single Inv  = 0
[  34.616000] [fglrx] total      TIM  = 0
[  36.000000] Clocksource tsc unstable (delta = -163199353 ns)
[  36.640000] appletouch: incomplete data package (first byte: 2, length: 4).
[  63.536000] NET: Registered protocol family 17
[  97.616000] NET: Registered protocol family 10
[  97.616000] lo: Disabled Privacy Extensions
[  97.616000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  107.732000] ath0: no IPv6 routers present
[  107.984000] vmnet1: no IPv6 routers present
[  108.072000] vmnet8: no IPv6 routers present
[  822.980000] usb 3-1: new low speed USB device using uhci_hcd and address 2
[  823.176000] usb 3-1: configuration #1 chosen from 1 choice
[  823.224000] input: HID 1241:1177 as /class/input/input11
[  823.224000] input: USB HID v1.10 Mouse [HID 1241:1177] on usb-0000:00:1d.1-1

@voyevoda e ilbudda
quando postate cose molto lunghe sarebbe meglio usare il tag code
questo lo trovate sopre le faccine e corrisponde a questo simbolo # il cancelletto
risulta più facile leggere 

@voyevoda
ho guardato con google ma sembra molto difficile far funzionare la tua webcam su ubuntu
prova a fare una ricerca con google mettendo il risultato di lsub che riguarda la tua webcam e poi prova le guide che dicono come installare i driver
io di più non riesco a fare

@ilbudda
sinceramente nemmeno io ma proverei a mettere tramite google le voci una per volta e vedere se ti dice qual'è la tua webcam 

Grazie maxfact...v faro sapere ulteriori novita...ubuntu forever!!!!! (good)

voyevoda ha scritto: Questa è la risposta:

vojevoda@vojevoda-laptop:~$ lsusb
Bus 005 Device 003: ID 0402:5602 ALi Corp.
Bus 005 Device 001: ID 0000:0000 
Bus 002 Device 004: ID 046d:c03d Logitech, Inc.
Bus 002 Device 001: ID 0000:0000 
Bus 004 Device 001: ID 0000:0000 
Bus 001 Device 001: ID 0000:0000 
Bus 003 Device 001: ID 0000:0000 

Considerando il fatto che ho un mouse della logitec...

purtroppo è la webcam che sta dando molti problemi a moltissimi utilizzatori di portatili Asus. A tutt'ora non sò se sono stati rilasciati i driver..
il portatile è un Asus giusto? che modello?

@ilbudda
forse la tua webcam dovrebbe funzionare coi driver uvc
prova a fare cosi
prima installi i build-essential e il pacchetto subversion
svn checkout svn://svn.berlios.de/linux-uvc/linux-uvc/trunk
poi
cd ~/trunk
poi
make
poi
sudo make install
poi
sudo depmod -ae

dopo
sudo nano /etc/modules
ed aggiungi
uvcvideo

::) niente di niente non va....questo mac bookre! mi sta uccidendo!!!!nemmeno il microfono per skype riesco a farlo partire!