Xorg.conf, ATI e 2 monitor: Impossibile.
Inviato: martedì 26 febbraio 2008, 19:11
Allora, il mio problema è questo: sto cercando di usare (senza risultato) due monitor con la mia Ati X1050.
Ho letto il wiki su come editare xorg.conf ed in più ho cercato nel forum con risultati ottimi...
Quello che non riesco a capire ora è cosa va nel mio xorg.conf, dato che ad ogni avvio i due monitor funzionano ma i driver fglrx non vengono caricati e mi parte la modalità grafica sicura.
Ecco il mio xorg.conf:
Grazie a tutti quelli che spero mi aiuteranno...
Ho letto il wiki su come editare xorg.conf ed in più ho cercato nel forum con risultati ottimi...
Quello che non riesco a capire ora è cosa va nel mio xorg.conf, dato che ad ogni avvio i due monitor funzionano ma i driver fglrx non vengono caricati e mi parte la modalità grafica sicura.
Ecco il mio xorg.conf:
Codice: Seleziona tutto
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Identifier "Default Layout"
Screen 0 "Default Screen" 0 0
Screen 1 "screen1" LeftOf "Default Screen"
Option "Xinerama" "true"
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dri"
Load "v4l"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "Monitor Generico"
Modelname "Custom 1"
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
Gamma 1.0
EndSection
Section "Device"
Identifier "ATI Technologies Inc RV370 5B60 [Radeon X1050 (PCIE)] 1"
# Boardname "ati"
Busid "PCI:5:0:0"
Driver "fglrx"
Screen 0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc RV370 5B60 [Radeon X1050 (PCIE)] 1"
Monitor "Monitor Generico"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1024 768
Modes "1024x768@60" "800x600@60" "800x600@56" "640x480@60"
EndSubSection
EndSection
Section "device"
Identifier "ATI Technologies Inc RV370 5B60 [Radeon X1050 (PCIE)] 2"
# Boardname "ati2"
Busid "PCI:5:0:0"
Driver "fglrx"
Screen 1
EndSection
Section "Screen"
Identifier "screen1"
Device "ATI Technologies Inc RV370 5B60 [Radeon X1050 (PCIE)] 2"
Defaultdepth 24
Monitor "monitor1"
SubSection "Display"
Depth 24
Modes "1024x768@60" "800x600@60" "800x600@56" "640x480@60"
EndSubSection
EndSection
Section "monitor"
Identifier "monitor1"
Vendorname "Generic LCD Display"
Modelname "LCD Panel 1024x768"
Horizsync 31.5-48.0
Vertrefresh 56.0 - 65.0
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
Gamma 1.0
#############################################
# Section "ServerLayout"
# Identifier "Default Layout"
# Screen 0 "Default Screen" 0 0
# Screen 1 "screen1" LeftOf "Default Screen"
# Option "Xinerama" "true"
# InputDevice "Generic Keyboard"
# InputDevice "Configured Mouse"
# EndSection
#############################################
Section "Extensions"
Option "Composite" "Enable"
EndSection
EndSection
Section "ServerFlags"
EndSection
