Forum Ubuntu-it

Ho Gutsy installato su un hard disk da 160GB così partizionato:
50 MB --> /boot dove sta Grub
50 GB --> windows xp pro NTFS
10 GB --> / Gutsy Gibbon 7.10
1GB --> swap
100GB --> NTFS partizione per dati

Scheda madre ECS KM400-M2,AMD SEMPRON 2600+(1.8Ghz),256 RAM DDR.
Scheda video ATI RADEON 9200SE su slot AGP.
Schermo LCD SAMSUNG 17'' SyncMaster 710v.

Di seguito ulteriori informazioni:
xorg.conf :

Codice: Seleziona tutto

Section "Files"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"it"
	Option		"XkbOptions"	"lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"stylus"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"eraser"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"cursor"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"ATI Technologies Inc RV280 [Radeon 9200 SE]"
	Driver		"ati"
	BusID		"PCI:1:0:0"
EndSection

Section "Monitor"
	Identifier	"SyncMaster"
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies Inc RV280 [Radeon 9200 SE]"
	Monitor		"SyncMaster"
	DefaultDepth	24
	SubSection "Display"
		Modes		"1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"

# Uncomment if you have a wacom tablet
#	InputDevice     "stylus"	"SendCoreEvents"
#	InputDevice     "cursor"	"SendCoreEvents"
#	InputDevice     "eraser"	"SendCoreEvents"
EndSection

comando lspci:

Codice: Seleziona tutto

betto@Betto-linux:~$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400/A] Chipset Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:09.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01)
00:0a.0 Multimedia controller: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder (rev 01)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01)
01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01)

Quindi la schermata sistema/amministrazione/schermi e grafica

Come mai in questa schermata mi compare il driver fglrx?!?
Eppure glxinfo |grep vendor mi da

Codice: Seleziona tutto

betto@Betto-linux:~$ glxinfo |grep vendor
server glx vendor string: SGI
client glx vendor string: SGI
OpenGL vendor string: Tungsten Graphics, Inc.

e glxinfo |grep "direct rendering" da

Codice: Seleziona tutto

betto@Betto-linux:~$ glxinfo |grep "direct rendering"
direct rendering: Yes

Chiedo ciò poichè capitano in modo random freeze del S.O.

Non so dove sbattere la testa.
Le situazioni in cui capita sono diverse e pare che non abbiano un collegamento...

1.Navigazione con firefox.Mi trovo a fondo pagina web,premo sulla tastiera il pulsante "inizio" (ovvero quello con la freccia verso l'alto sopra il pulsante fine)e freeza...

2.eseguo .wmv col totem 2.20.0 e si blocca dopo un tempo random

Bò?!?

Forum Ubuntu-it

[Ati] Ma che driver sto usando con ATI RADEON 9200SE?

[Ati] Ma che driver sto usando con ATI RADEON 9200SE?

Re: [Ati] Ma che driver sto usando con ATI RADEON 9200SE?