Forum Ubuntu-it

Codice: Seleziona tutto

Only plain text email is forwarded by the  Discuss@Linmodems.org List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.22-14-generic 
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Your contry's local Linux experts
 can be found through: http://www.linux.org/groups/index.html. 
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org 
--------------------------  System information ----------------------------
CPU=i686,  
Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007
 scanModem update of:  2008_02_25
The modem symbolic link is /dev/modem -> ttySL0
The slmodemd set symbolic link is /dev/ttySL0 -> /dev/pts/0

 There are no blacklisted modem drivers in /etc/modprobe*  files 

The Advanced Linux Sound Architecture (ALSA) packages providing audio support, 
also includes drivers for some modems. The ALSA diagnostics are written during 
bootup to /proc/asound/ folders.

 The /proc/asound/ audio+modem diagostics are being copied.
 Finished copy to Modem/ALSAuser.tgz

The ALSA verion is 1.0.14
The modem cards detected by "aplay -l"  are:
scheda 0: Intel [HDA Intel], dispositivo 6: Si3054 Modem [Si3054 Modem]

The /proc/asound/pcm file reports:
-----------------------
00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1
00-00: HDA Generic : HDA Generic : playback 1 : capture 1

about /proc/asound/cards:
------------------------
 0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xfc400000 irq 22

 The modem codec file for the the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: Generic 11c1 Si3054
Address: 1
Vendor Id: 0x11c11040
Subsystem Id: 0x11790001
Revision Id: 0x100200

 The audio card hosts a softmodem chip:  0x11c11040

 The softmodem chip 0x11c11040 is not yet supported under Linux.
 Code must be developed by manufacture LSI Inc.
 See details in http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00915.html
 Read InfoGeneral.txt about alternatives modem hardware.
USB modem not detected by lsusb

For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:1b.0	8086:284b	1179:ff00	Audio device: Intel Corporation 82801H 

 Modem interrupt assignment and sharing: 
 22:        710        428   IO-APIC-fasteoi   HDA Intel
 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[   14.432000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[   14.432000] PCI: Setting latency timer of device 0000:00:1b.0 to 64

For candidate card in slot 01:00.1, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 01:00.1	1002:aa08	1002:aa08	Audio device: ATI Technologies Inc Unknown device aa08

 Modem interrupt assignment and sharing: 
 --- Bootup diagnostics for card in PCI slot 01:00.1 ----


 === Finished modem firmware and bootup diagnostics section. ===
 === Next deducing cogent software ===


Predictive diagnostics for card in bus 00:1b.0:
	Modem chipset  detected on
CLASS="Class 0403: 8086:284b"
NAME="Audio device: Intel Corporation 82801H "
PCIDEV=8086:284b
SUBSYS=1179:ff00
SUBven=1179
IRQ=22
IDENT=Agere_11c11040_chip_is_not_supported
SLMODEMD_DEVICE=hw:0,6
SoftChip=11c11040
HDA=8086:284b
Driver=snd-hda-intel
SOFT=8086:284b.HDA

 For candidate modem in:  00:1b.0
   Class 0403: 8086:284b Audio device: Intel Corporation 82801H
      Primary PCI_id  8086:284b
    Subsystem PCI_id  1179:ff00 
    Softmodem codec or chipset from diagnostics: 
                               from    Archives: 
                        
      

 Lacking a dsp (digital signal processing) chip, the modem is a software 
 intensive or "softmodem" type. Its primary controller manages the traffic 
 with the CPU. But the software needed is specified in the Subsystem.
 -----------------------------------------
Support type needed or chipset:	Agere_11c11040_chip_is_not_supported

----------------end Softmodem section --------------


Predictive diagnostics for card in bus 01:00.1:
	Modem chipset not detected on
CLASS="Class 0403: 1002:aa08"
NAME="Audio device: ATI Technologies Inc Unknown device aa08"
PCIDEV=1002:aa08
SUBSYS=1002:aa08
SUBven=1002
IRQ=11

 For candidate modem in:  01:00.1
   Class 0403: 1002:aa08 Audio device: ATI Technologies Inc Unknown device aa08
      Primary PCI_id  1002:aa08
 Support type needed or chipset:	
 

----------------end Softmodem section --------------

scanModem could not identify the Support Type needed from diagnosics or archives.
	If an alternative boot into Microsoft windows can be done, do mouse
clicks on:
   Start > Settings > Control Panel > Classical View (for Window XP) > System
> Hardware > Device Manager > Modems > Click on the + > Modem. Double click to
expand the graphic. Manufacturer information may be displayed. For example, CXT
stands for Conexant. Click the Diagnostics Tab. Record any hardware ID or vendor
and device information.
Next do the Query Modem and record the ATI specifications displayed such as:
    ATI3 - Agere SoftModem Version 2.1.22
    ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27
Try to identify the modem setup file, with name perhaps MODEM.INF.
If may contain chipset Vendor informaton.


 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.1.3
             and the compiler used in kernel assembly: 4.1.3


 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.1
   linuc_headers base folder /lib/modules/2.6.22-14-generic/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu,  linux-libc-dev). The also required headers of package libc6 are commonly installed by default. 

Compressed files at: /usr/src/alsa-driver.tar.bz2


If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed package
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
	-rwsr-xr-- 1 root dip 269256 2007-10-04 21:57 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	sudo chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/YourSystem.txt concerning other COMM channels: eth0 eth1
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for the experts
 should trouble shooting be necessary.
==========================================================

# start/stop the daemon when the USB modem is connected
KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   lrwxrwxrwx 1 root root 6 2008-03-01 08:44 /dev/modem -> ttySL0
slmodemd created symbolic link /dev/ttySL0:  lrwxrwxrwx 1 root root 10 2008-03-01 08:44 /dev/ttySL0 -> /dev/pts/0
     Within /etc/udev/ files:
/etc/udev/rules.d/030_sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
/etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
     Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe --ignore-install ungrab-winmodem ;  modprobe --ignore-install slamr; test -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout /dev/slamr0) 
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------