[Boot] Hard disk da 2.5" con partizioni errate
Inviato: domenica 16 marzo 2008, 15:18
Ciao,
qualcuno mi può aiutare per riparare un HD da 20GB da 2.5"
Durante un'installazione di ubuntu 7.10 su un IBM-Thinkpad devo aver fatto qualche pasticcio con le partizioni.
Alle successive partenze da errori sul disco.
Se provo nuovamente ad installare con LIVE-CD niente al momento del partizionamento si pianta....
Ho provato a partire con il LIVE-CD e poi provare altri software di gestione delle partizioni a cancellare tutto....
Questo è quanto mi succede con "sfdisk"
The number of cylinders for this disk is set to 2432.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
premendo p per elencare le partizioni ottengo
----------------------------------------------------------------------------------------
Disk /dev/sda: 20.0 GB, 20003880960 bytes
255 heads, 63 sectors/track, 2432 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xd55fd55f
Device Boot Start End Blocks Id System
/dev/sda1 * 1 1275 10241406 83 Linux
/dev/sda2 1276 1657 3068415 82 Linux swap / Solaris
/dev/sda3 1658 2432 6225187+ 83 Linux
Command (m for help):
---------------------------------------------------------------------------------------
cancello le partizioni e alla fine ottengo
----------------------------------------------------------------------------------------
Disk /dev/sda (Sun disk label): 255 heads, 63 sectors, 5400 rpm
2432 cylinders, 2 alternate cylinders, 2432 physical cylinders
0 extra sects/cyl, interleave 1:1
Label ID: Linux cyl 2432 alt 2 hd 255 sec 63
Volume ID:
Units = cylinders of 16065 * 512 bytes
Device Flag Start End Blocks Id System
----------------------------------------------------------------------------------------
Quando tento di consolidare con il comando di scrittura ottengo
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table.
The new table will be used at the next reboot.
Syncing disks.
Alla successiva ripartenza nulla è cambiato.........
Con altri partizionari sempre la stessa cosa mi lasciano agire sulle partizioni ma alla scrittura il disco non cambia, come se fosse protetto.....
Con i partizionatori win ovviamente nulla.....
Ciao e grazie in anticipo a tutti.....
qualcuno mi può aiutare per riparare un HD da 20GB da 2.5"
Durante un'installazione di ubuntu 7.10 su un IBM-Thinkpad devo aver fatto qualche pasticcio con le partizioni.
Alle successive partenze da errori sul disco.
Se provo nuovamente ad installare con LIVE-CD niente al momento del partizionamento si pianta....
Ho provato a partire con il LIVE-CD e poi provare altri software di gestione delle partizioni a cancellare tutto....
Questo è quanto mi succede con "sfdisk"
The number of cylinders for this disk is set to 2432.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
premendo p per elencare le partizioni ottengo
----------------------------------------------------------------------------------------
Disk /dev/sda: 20.0 GB, 20003880960 bytes
255 heads, 63 sectors/track, 2432 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xd55fd55f
Device Boot Start End Blocks Id System
/dev/sda1 * 1 1275 10241406 83 Linux
/dev/sda2 1276 1657 3068415 82 Linux swap / Solaris
/dev/sda3 1658 2432 6225187+ 83 Linux
Command (m for help):
---------------------------------------------------------------------------------------
cancello le partizioni e alla fine ottengo
----------------------------------------------------------------------------------------
Disk /dev/sda (Sun disk label): 255 heads, 63 sectors, 5400 rpm
2432 cylinders, 2 alternate cylinders, 2432 physical cylinders
0 extra sects/cyl, interleave 1:1
Label ID: Linux cyl 2432 alt 2 hd 255 sec 63
Volume ID:
Units = cylinders of 16065 * 512 bytes
Device Flag Start End Blocks Id System
----------------------------------------------------------------------------------------
Quando tento di consolidare con il comando di scrittura ottengo
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table.
The new table will be used at the next reboot.
Syncing disks.
Alla successiva ripartenza nulla è cambiato.........
Con altri partizionari sempre la stessa cosa mi lasciano agire sulle partizioni ma alla scrittura il disco non cambia, come se fosse protetto.....
Con i partizionatori win ovviamente nulla.....
Ciao e grazie in anticipo a tutti.....