[Risolto] [Driver] Driver onda ET505UP pcmcia

Riconoscimento, installazione e configurazione delle periferiche.
Avatar utente
jean-marc
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 253
Iscrizione: venerdì 15 dicembre 2006, 1:11
Località: Castefranco Veneto (TV)

[Risolto] [Driver] Driver onda ET505UP pcmcia

Messaggio da jean-marc »

Ciao tutti!
Qualcuno mi sa dare dritte per fare andare questa scheda (pcmcia)...
Ho provatto vari topics notamente quello sui modelli MT505UP (usb) e anche su: [htp]http://wiki.ubuntu-it.org/OndaN500DH [/htp] ma niente non viene riconosciuta!!!
Grazie!
Ultima modifica di jean-marc il giovedì 23 ottobre 2008, 17:24, modificato 1 volta in totale.
Shaved
Rampante Reduce
Rampante Reduce
Messaggi: 7738
Iscrizione: lunedì 27 marzo 2006, 18:36

Re: [Driver] Driver onda ET505UP pcmcia

Messaggio da Shaved »

Non ho esperienza sulla tua scheda, ma provo ugualmente a venirti incontro :)

Avvia il pc senza inserire la scheda, poi apri il terminale e digita

Codice: Seleziona tutto

tail -f /var/log/messages
Lascia aperto il terminale e inserisci la scheda. Osserva i messaggi a video e posta quelli che verranno scritti dopo avere inserito la scheda. Copiali e incollali qui, in un post ;)
Avatar utente
jean-marc
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 253
Iscrizione: venerdì 15 dicembre 2006, 1:11
Località: Castefranco Veneto (TV)

Re: [Driver] Driver onda ET505UP pcmcia

Messaggio da jean-marc »

Ciao shaved!

allora un po di info:

lsusb senza la scheda:

Codice: Seleziona tutto

debian:/home/polux# lsusb
Bus 005 Device 001: ID 0000:0000  
Bus 004 Device 001: ID 0000:0000  
Bus 003 Device 001: ID 0000:0000  
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 001: ID 0000:0000  
debian:/home/polux# 


con la scheda:

Codice: Seleziona tutto

debian:/home/polux# lsusb
Bus 008 Device 001: ID 0000:0000  
Bus 007 Device 001: ID 0000:0000  
Bus 006 Device 002: ID 19d2:2000  
Bus 006 Device 001: ID 0000:0000  
Bus 005 Device 001: ID 0000:0000  
Bus 004 Device 001: ID 0000:0000  
Bus 003 Device 001: ID 0000:0000  
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 001: ID 0000:0000  
debian:/home/polux#


Quindi ottengo id product e id vendor.
Invece se digito: cat /proc/bus/usb/devices (con la scheda..!)

Codice: Seleziona tutto

debian:/home/polux# cat /proc/bus/usb/devices 
T:  Bus=08 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 2
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.24-1-686 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=0000:03:00.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms
[...]
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 3
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.24-1-686 ohci_hcd
S:  Product=OHCI Host Controller
S:  SerialNumber=0000:00:13.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
Non viene riconosciuto niente...
Tolgo la schede e digito: tail -f  /var/log/messages

Codice: Seleziona tutto

debian:/home/polux# tail -f  /var/log/messages
May 20 15:54:35 debian kernel: ohci_hcd 0000:03:00.0: USB bus 6 deregistered
May 20 15:54:35 debian kernel: ACPI: PCI interrupt for device 0000:03:00.0 disabled
May 20 15:54:35 debian kernel: ohci_hcd 0000:03:00.1: remove, state 0
May 20 15:54:35 debian kernel: usb usb7: USB disconnect, address 1
May 20 15:54:35 debian kernel: ohci_hcd 0000:03:00.1: USB bus 7 deregistered
May 20 15:54:35 debian kernel: ACPI: PCI interrupt for device 0000:03:00.1 disabled
May 20 15:54:35 debian kernel: ehci_hcd 0000:03:00.2: remove, state 0
May 20 15:54:35 debian kernel: usb usb8: USB disconnect, address 1
May 20 15:54:35 debian kernel: ehci_hcd 0000:03:00.2: USB bus 8 deregistered
May 20 15:54:35 debian kernel: ACPI: PCI interrupt for device 0000:03:00.2 disabled
inserisco la scheda :

Codice: Seleziona tutto

[...]
May 20 15:56:50 debian kernel: pccard: CardBus card inserted into slot 0
May 20 15:56:50 debian kernel: PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
May 20 15:56:50 debian kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16
May 20 15:56:50 debian kernel: ohci_hcd 0000:03:00.0: OHCI Host Controller
May 20 15:56:50 debian kernel: ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
May 20 15:56:50 debian kernel: ohci_hcd 0000:03:00.0: irq 16, io mem 0x48000000
May 20 15:56:51 debian kernel: usb usb6: configuration #1 chosen from 1 choice
May 20 15:56:51 debian kernel: hub 6-0:1.0: USB hub found
May 20 15:56:51 debian kernel: hub 6-0:1.0: 1 port detected
May 20 15:56:51 debian kernel: PCI: Enabling device 0000:03:00.1 (0000 -> 0002)
May 20 15:56:51 debian kernel: ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 16
May 20 15:56:51 debian kernel: ohci_hcd 0000:03:00.1: OHCI Host Controller
May 20 15:56:51 debian kernel: ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 7
May 20 15:56:51 debian kernel: ohci_hcd 0000:03:00.1: irq 16, io mem 0x48001000
May 20 15:56:51 debian kernel: usb usb7: configuration #1 chosen from 1 choice
May 20 15:56:51 debian kernel: hub 7-0:1.0: USB hub found
May 20 15:56:51 debian kernel: hub 7-0:1.0: 1 port detected
May 20 15:56:51 debian kernel: PCI: Enabling device 0000:03:00.2 (0000 -> 0002)
May 20 15:56:51 debian kernel: ACPI: PCI Interrupt 0000:03:00.2[C] -> GSI 17 (level, low) -> IRQ 16
May 20 15:56:51 debian kernel: ehci_hcd 0000:03:00.2: EHCI Host Controller
May 20 15:56:51 debian kernel: ehci_hcd 0000:03:00.2: new USB bus registered, assigned bus number 8
May 20 15:56:51 debian kernel: ehci_hcd 0000:03:00.2: irq 16, io mem 0x48002000
May 20 15:56:51 debian kernel: ehci_hcd 0000:03:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
May 20 15:56:51 debian kernel: usb usb8: configuration #1 chosen from 1 choice
May 20 15:56:51 debian kernel: hub 8-0:1.0: USB hub found
May 20 15:56:51 debian kernel: hub 8-0:1.0: 2 ports detected
May 20 15:56:56 debian kernel: usb 6-1: new full speed USB device using ohci_hcd and address 2
May 20 15:56:57 debian kernel: usb 6-1: new full speed USB device using ohci_hcd and address 3
May 20 15:56:58 debian kernel: usb 6-1: new full speed USB device using ohci_hcd and address 4
May 20 15:56:58 debian kernel: usb 6-1: new full speed USB device using ohci_hcd and address 5
May 20 15:57:50 debian kernel: usb 6-1: new full speed USB device using ohci_hcd and address 6
May 20 15:57:51 debian kernel: usb 6-1: new full speed USB device using ohci_hcd and address 7
May 20 15:57:52 debian kernel: usb 6-1: new full speed USB device using ohci_hcd and address 8
May 20 15:57:52 debian kernel: usb 6-1: new full speed USB device using ohci_hcd and address 9
May 20 15:57:55 debian kernel: pccard: card ejected from slot 0
May 20 15:57:55 debian kernel: ohci_hcd 0000:03:00.0: remove, state 0
May 20 15:57:55 debian kernel: usb usb6: USB disconnect, address 1
May 20 15:57:55 debian kernel: ohci_hcd 0000:03:00.0: USB bus 6 deregistered
May 20 15:57:55 debian kernel: ACPI: PCI interrupt for device 0000:03:00.0 disabled
May 20 15:57:55 debian kernel: ohci_hcd 0000:03:00.1: remove, state 0
May 20 15:57:55 debian kernel: usb usb7: USB disconnect, address 1
May 20 15:57:55 debian kernel: ohci_hcd 0000:03:00.1: USB bus 7 deregistered
May 20 15:57:55 debian kernel: ACPI: PCI interrupt for device 0000:03:00.1 disabled
May 20 15:57:55 debian kernel: ehci_hcd 0000:03:00.2: remove, state 0
May 20 15:57:55 debian kernel: usb usb8: USB disconnect, address 1
May 20 15:57:55 debian kernel: ehci_hcd 0000:03:00.2: USB bus 8 deregistered
May 20 15:57:55 debian kernel: ACPI: PCI interrupt for device 0000:03:00.2 disabled
Tolgo la scheda perchè sino dopo un po mi si impalla il sistema (nel senso che devo premere il botone on/off de portabile)...
Per finire dmesg:

Codice: Seleziona tutto

debian:/home/polux# dmesg
[...]
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 18, io mem 0xd0001000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
libata version 3.00 loaded.
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.1: irq 18, io mem 0xd0002000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 16 (level, low) -> IRQ 17
ohci_hcd 0000:02:07.0: OHCI Host Controller
ohci_hcd 0000:02:07.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:02:07.0: irq 17, io mem 0xd0200000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:02:07.1[B] -> GSI 18 (level, low) -> IRQ 19
ohci_hcd 0000:02:07.1: OHCI Host Controller
ohci_hcd 0000:02:07.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:02:07.1: irq 19, io mem 0xd0201000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 18
eth0: RealTek RTL8139 at 0xa000, 00:02:3f:20:4f:f5, IRQ 18
eth0:  Identified 8139 chip type 'RTL-8101'
ACPI: PCI Interrupt 0000:02:07.2[C] -> GSI 19 (level, low) -> IRQ 18
ehci_hcd 0000:02:07.2: EHCI Host Controller
ehci_hcd 0000:02:07.2: new USB bus registered, assigned bus number 5
ehci_hcd 0000:02:07.2: irq 18, io mem 0xd0202400
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
ehci_hcd 0000:02:07.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[...]
Yenta: CardBus bridge found at 0000:02:04.0 [103c:006b]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:04.0, mfunc 0x01111d22, devctl 0x64
input: PS/2 Mouse as /class/input/input6
input: AlpsPS/2 ALPS GlidePoint as /class/input/input7
Real Time Clock Driver v1.12ac
Yenta: ISA IRQ mask 0x0ed8, PCI irq 16
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
cs: IO port probe 0xa000-0xafff: clean.
pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
Yenta: CardBus bridge found at 0000:02:04.1 [103c:006b]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:04.1, mfunc 0x01111d22, devctl 0x64
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
Yenta: ISA IRQ mask 0x0e18, PCI irq 17
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#02) from #04 to #07
pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
cs: IO port probe 0xa000-0xafff: clean.
pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 5 (level, low) -> IRQ 5
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x408-0x40f 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x408-0x40f 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07
cs: IO port probe 0xa00-0xaff: clean.
[...]
pccard: CardBus card inserted into slot 0
PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.0 to 64
ohci_hcd 0000:03:00.0: OHCI Host Controller
ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
ohci_hcd 0000:03:00.0: irq 16, io mem 0x48000000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
PCI: Enabling device 0000:03:00.1 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.1 to 64
ohci_hcd 0000:03:00.1: OHCI Host Controller
ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 7
ohci_hcd 0000:03:00.1: irq 16, io mem 0x48001000
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
PCI: Enabling device 0000:03:00.2 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.2[C] -> GSI 17 (level, low) -> IRQ 16
ehci_hcd 0000:03:00.2: EHCI Host Controller
ehci_hcd 0000:03:00.2: new USB bus registered, assigned bus number 8
ehci_hcd 0000:03:00.2: irq 16, io mem 0x48002000
ehci_hcd 0000:03:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb 6-1: new full speed USB device using ohci_hcd and address 2
usb 6-1: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 0:0:0:0: CD-ROM            ONDA     USB Storage      2.31 PQ: 0 ANSI: 2
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi-1 drive
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00
sr: Sense Key : No Sense [current] 
sr: Add. Sense: No additional sense information
usb 6-1: reset full speed USB device using ohci_hcd and address 2
sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00
sr: Sense Key : No Sense [current] 
sr: Add. Sense: No additional sense information
ohci_hcd 0000:03:00.0: HC died; cleaning up
ohci_hcd 0000:03:00.1: HC died; cleaning up
ehci_hcd 0000:03:00.2: HC died; cleaning up
pccard: card ejected from slot 0
usb 6-1: USB disconnect, address 2
ohci_hcd 0000:03:00.0: leak ed dfa92080 (#87) state 0 (has tds)
scsi 0:0:0:0: rejecting I/O to dead device
scsi 0:0:0:0: rejecting I/O to dead device
scsi 0:0:0:0: rejecting I/O to dead device
scsi 0:0:0:0: rejecting I/O to dead device
ohci_hcd 0000:03:00.0: remove, state 0
usb usb6: USB disconnect, address 1
ohci_hcd 0000:03:00.0: dma_pool_destroy ohci_ed, dfa92000 busy
ohci_hcd 0000:03:00.0: USB bus 6 deregistered
ACPI: PCI interrupt for device 0000:03:00.0 disabled
ohci_hcd 0000:03:00.1: remove, state 0
usb usb7: USB disconnect, address 1
ohci_hcd 0000:03:00.1: USB bus 7 deregistered
ACPI: PCI interrupt for device 0000:03:00.1 disabled
ehci_hcd 0000:03:00.2: remove, state 0
usb usb8: USB disconnect, address 1
ehci_hcd 0000:03:00.2: USB bus 8 deregistered
ACPI: PCI interrupt for device 0000:03:00.2 disabled
pccard: CardBus card inserted into slot 0
PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.0 to 64
ohci_hcd 0000:03:00.0: OHCI Host Controller
ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
ohci_hcd 0000:03:00.0: irq 16, io mem 0x48000000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
PCI: Enabling device 0000:03:00.1 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.1 to 64
ohci_hcd 0000:03:00.1: OHCI Host Controller
ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 7
ohci_hcd 0000:03:00.1: irq 16, io mem 0x48001000
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
PCI: Enabling device 0000:03:00.2 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.2[C] -> GSI 17 (level, low) -> IRQ 16
ehci_hcd 0000:03:00.2: EHCI Host Controller
ehci_hcd 0000:03:00.2: new USB bus registered, assigned bus number 8
ehci_hcd 0000:03:00.2: irq 16, io mem 0x48002000
ehci_hcd 0000:03:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb 6-1: new full speed USB device using ohci_hcd and address 2
usb 6-1: device descriptor read/64, error -62
usb 6-1: device descriptor read/64, error -62
usb 6-1: new full speed USB device using ohci_hcd and address 3
usb 6-1: device descriptor read/64, error -62
usb 6-1: device descriptor read/64, error -62
usb 6-1: new full speed USB device using ohci_hcd and address 4
usb 6-1: device not accepting address 4, error -62
usb 6-1: new full speed USB device using ohci_hcd and address 5
usb 6-1: device not accepting address 5, error -62
usb 6-1: new full speed USB device using ohci_hcd and address 6
usb 6-1: device descriptor read/64, error -62
usb 6-1: device descriptor read/64, error -62
usb 6-1: new full speed USB device using ohci_hcd and address 7
usb 6-1: device descriptor read/64, error -62
usb 6-1: device descriptor read/64, error -62
usb 6-1: new full speed USB device using ohci_hcd and address 8
usb 6-1: device not accepting address 8, error -62
usb 6-1: new full speed USB device using ohci_hcd and address 9
usb 6-1: device not accepting address 9, error -62
ohci_hcd 0000:03:00.0: HC died; cleaning up
ohci_hcd 0000:03:00.1: HC died; cleaning up
ehci_hcd 0000:03:00.2: HC died; cleaning up
pccard: card ejected from slot 0
ohci_hcd 0000:03:00.0: remove, state 0
usb usb6: USB disconnect, address 1
ohci_hcd 0000:03:00.0: USB bus 6 deregistered
ACPI: PCI interrupt for device 0000:03:00.0 disabled
ohci_hcd 0000:03:00.1: remove, state 0
usb usb7: USB disconnect, address 1
ohci_hcd 0000:03:00.1: USB bus 7 deregistered
ACPI: PCI interrupt for device 0000:03:00.1 disabled
ehci_hcd 0000:03:00.2: remove, state 0
usb usb8: USB disconnect, address 1
ehci_hcd 0000:03:00.2: USB bus 8 deregistered
ACPI: PCI interrupt for device 0000:03:00.2 disabled
pccard: CardBus card inserted into slot 0
PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.0 to 64
ohci_hcd 0000:03:00.0: OHCI Host Controller
ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
ohci_hcd 0000:03:00.0: irq 16, io mem 0x48000000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
PCI: Enabling device 0000:03:00.1 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.1 to 64
ohci_hcd 0000:03:00.1: OHCI Host Controller
ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 7
ohci_hcd 0000:03:00.1: irq 16, io mem 0x48001000
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
PCI: Enabling device 0000:03:00.2 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.2[C] -> GSI 17 (level, low) -> IRQ 16
ehci_hcd 0000:03:00.2: EHCI Host Controller
ehci_hcd 0000:03:00.2: new USB bus registered, assigned bus number 8
ehci_hcd 0000:03:00.2: irq 16, io mem 0x48002000
ehci_hcd 0000:03:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb 6-1: new full speed USB device using ohci_hcd and address 3
usb 6-1: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 1:0:0:0: CD-ROM            ONDA     USB Storage      2.31 PQ: 0 ANSI: 2
sr0: scsi-1 drive
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg0 type 5
sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00
sr: Sense Key : No Sense [current] 
sr: Add. Sense: No additional sense information
debian:/home/polux#
il seguitto nel prossimo post...
Avatar utente
jean-marc
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 253
Iscrizione: venerdì 15 dicembre 2006, 1:11
Località: Castefranco Veneto (TV)

Re: [Driver] Driver onda ET505UP pcmcia

Messaggio da jean-marc »

ecco di seguitto:

Adesso, caricando il modulo option:

Codice: Seleziona tutto

debian:/home/polux# modprobe option
E: tail -f  /var/log/messages
debian:/home/polux# tail -f  /var/log/messages

Codice: Seleziona tutto

debian:/home/polux# tail -f  /var/log/messages
May 20 16:10:48 debian kernel: ohci_hcd 0000:03:00.0: USB bus 6 deregistered
May 20 16:10:48 debian kernel: ACPI: PCI interrupt for device 0000:03:00.0 disabled
May 20 16:10:48 debian kernel: ohci_hcd 0000:03:00.1: remove, state 0
May 20 16:10:48 debian kernel: usb usb7: USB disconnect, address 1
May 20 16:10:48 debian kernel: ohci_hcd 0000:03:00.1: USB bus 7 deregistered
May 20 16:10:48 debian kernel: ACPI: PCI interrupt for device 0000:03:00.1 disabled
May 20 16:10:48 debian kernel: ehci_hcd 0000:03:00.2: remove, state 0
May 20 16:10:48 debian kernel: usb usb8: USB disconnect, address 1
May 20 16:10:48 debian kernel: ehci_hcd 0000:03:00.2: USB bus 8 deregistered
May 20 16:10:48 debian kernel: ACPI: PCI interrupt for device 0000:03:00.2 disabled
May 20 16:11:44 debian kernel: pccard: CardBus card inserted into slot 0
May 20 16:11:44 debian kernel: PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
May 20 16:11:44 debian kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16
May 20 16:11:44 debian kernel: ohci_hcd 0000:03:00.0: OHCI Host Controller
May 20 16:11:44 debian kernel: ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
May 20 16:11:44 debian kernel: ohci_hcd 0000:03:00.0: irq 16, io mem 0x48000000
May 20 16:11:44 debian kernel: usb usb6: configuration #1 chosen from 1 choice
May 20 16:11:44 debian kernel: hub 6-0:1.0: USB hub found
May 20 16:11:44 debian kernel: hub 6-0:1.0: 1 port detected
May 20 16:11:44 debian kernel: PCI: Enabling device 0000:03:00.1 (0000 -> 0002)
May 20 16:11:44 debian kernel: ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 16
May 20 16:11:44 debian kernel: ohci_hcd 0000:03:00.1: OHCI Host Controller
May 20 16:11:44 debian kernel: ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 7
May 20 16:11:44 debian kernel: ohci_hcd 0000:03:00.1: irq 16, io mem 0x48001000
May 20 16:11:44 debian kernel: usb usb7: configuration #1 chosen from 1 choice
May 20 16:11:44 debian kernel: hub 7-0:1.0: USB hub found
May 20 16:11:44 debian kernel: hub 7-0:1.0: 1 port detected
May 20 16:11:44 debian kernel: PCI: Enabling device 0000:03:00.2 (0000 -> 0002)
May 20 16:11:44 debian kernel: ACPI: PCI Interrupt 0000:03:00.2[C] -> GSI 17 (level, low) -> IRQ 16
May 20 16:11:44 debian kernel: ehci_hcd 0000:03:00.2: EHCI Host Controller
May 20 16:11:44 debian kernel: ehci_hcd 0000:03:00.2: new USB bus registered, assigned bus number 8
May 20 16:11:44 debian kernel: ehci_hcd 0000:03:00.2: irq 16, io mem 0x48002000
May 20 16:11:44 debian kernel: ehci_hcd 0000:03:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
May 20 16:11:44 debian kernel: usb usb8: configuration #1 chosen from 1 choice
May 20 16:11:44 debian kernel: hub 8-0:1.0: USB hub found
May 20 16:11:44 debian kernel: hub 8-0:1.0: 2 ports detected
May 20 16:11:48 debian kernel: usb 6-1: new full speed USB device using ohci_hcd and address 2
May 20 16:11:50 debian kernel: usb 6-1: new full speed USB device using ohci_hcd and address 3
May 20 16:11:50 debian kernel: usb 6-1: configuration #1 chosen from 1 choice
May 20 16:11:50 debian kernel: scsi2 : SCSI emulation for USB Mass Storage devices
May 20 16:11:55 debian kernel: scsi 2:0:0:0: CD-ROM            ONDA     USB Storage      2.31 PQ: 0 ANSI: 2
May 20 16:11:55 debian kernel: sr0: scsi-1 drive
May 20 16:11:55 debian kernel: sr 2:0:0:0: Attached scsi generic sg0 type 5
May 20 16:11:56 debian kernel: sr: Sense Key : No Sense [current] 
May 20 16:11:56 debian kernel: sr: Add. Sense: No additional sense information
La scheda viene riconosciuta come CD-ROM (e già qualcosa..!)

E con:
debian:/home/polux# cat /proc/bus/usb/devices
Si vede la scheda !
 

Codice: Seleziona tutto

T:  Bus=06 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=2000 Rev= 0.00
S:  Manufacturer=Qualcomm, Incorporated
S:  Product=USB ONDA Storage
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=87(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=07(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
Per finire dmesg:

Codice: Seleziona tutto

0x820-0x8ff: clean.
...
pccard: CardBus card inserted into slot 0
PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.0 to 64
ohci_hcd 0000:03:00.0: OHCI Host Controller
ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
ohci_hcd 0000:03:00.0: irq 16, io mem 0x48000000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
PCI: Enabling device 0000:03:00.1 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.1 to 64
ohci_hcd 0000:03:00.1: OHCI Host Controller
ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 7
ohci_hcd 0000:03:00.1: irq 16, io mem 0x48001000
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
PCI: Enabling device 0000:03:00.2 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.2[C] -> GSI 17 (level, low) -> IRQ 16
ehci_hcd 0000:03:00.2: EHCI Host Controller
ehci_hcd 0000:03:00.2: new USB bus registered, assigned bus number 8
ehci_hcd 0000:03:00.2: irq 16, io mem 0x48002000
ehci_hcd 0000:03:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb 6-1: new full speed USB device using ohci_hcd and address 2
usb 6-1: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 0:0:0:0: CD-ROM            ONDA     USB Storage      2.31 PQ: 0 ANSI: 2
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi-1 drive
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00
sr: Sense Key : No Sense [current] 
sr: Add. Sense: No additional sense information
usb 6-1: reset full speed USB device using ohci_hcd and address 2
sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00
sr: Sense Key : No Sense [current] 
sr: Add. Sense: No additional sense information
ohci_hcd 0000:03:00.0: HC died; cleaning up
ohci_hcd 0000:03:00.1: HC died; cleaning up
ehci_hcd 0000:03:00.2: HC died; cleaning up
pccard: card ejected from slot 0
usb 6-1: USB disconnect, address 2
ohci_hcd 0000:03:00.0: leak ed dfa92080 (#87) state 0 (has tds)
scsi 0:0:0:0: rejecting I/O to dead device
scsi 0:0:0:0: rejecting I/O to dead device
scsi 0:0:0:0: rejecting I/O to dead device
scsi 0:0:0:0: rejecting I/O to dead device
ohci_hcd 0000:03:00.0: remove, state 0
usb usb6: USB disconnect, address 1
ohci_hcd 0000:03:00.0: dma_pool_destroy ohci_ed, dfa92000 busy
ohci_hcd 0000:03:00.0: USB bus 6 deregistered
ACPI: PCI interrupt for device 0000:03:00.0 disabled
ohci_hcd 0000:03:00.1: remove, state 0
usb usb7: USB disconnect, address 1
ohci_hcd 0000:03:00.1: USB bus 7 deregistered
ACPI: PCI interrupt for device 0000:03:00.1 disabled
ehci_hcd 0000:03:00.2: remove, state 0
usb usb8: USB disconnect, address 1
ehci_hcd 0000:03:00.2: USB bus 8 deregistered
ACPI: PCI interrupt for device 0000:03:00.2 disabled
pccard: CardBus card inserted into slot 0
PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.0 to 64
ohci_hcd 0000:03:00.0: OHCI Host Controller
ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
ohci_hcd 0000:03:00.0: irq 16, io mem 0x48000000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
PCI: Enabling device 0000:03:00.1 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.1 to 64
ohci_hcd 0000:03:00.1: OHCI Host Controller
ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 7
ohci_hcd 0000:03:00.1: irq 16, io mem 0x48001000
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
PCI: Enabling device 0000:03:00.2 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.2[C] -> GSI 17 (level, low) -> IRQ 16
ehci_hcd 0000:03:00.2: EHCI Host Controller
ehci_hcd 0000:03:00.2: new USB bus registered, assigned bus number 8
ehci_hcd 0000:03:00.2: irq 16, io mem 0x48002000
ehci_hcd 0000:03:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb 6-1: new full speed USB device using ohci_hcd and address 2
usb 6-1: device descriptor read/64, error -62
usb 6-1: device descriptor read/64, error -62
usb 6-1: new full speed USB device using ohci_hcd and address 3
usb 6-1: device descriptor read/64, error -62
usb 6-1: device descriptor read/64, error -62
usb 6-1: new full speed USB device using ohci_hcd and address 4
usb 6-1: device not accepting address 4, error -62
usb 6-1: new full speed USB device using ohci_hcd and address 5
usb 6-1: device not accepting address 5, error -62
usb 6-1: new full speed USB device using ohci_hcd and address 6
usb 6-1: device descriptor read/64, error -62
usb 6-1: device descriptor read/64, error -62
usb 6-1: new full speed USB device using ohci_hcd and address 7
usb 6-1: device descriptor read/64, error -62
usb 6-1: device descriptor read/64, error -62
usb 6-1: new full speed USB device using ohci_hcd and address 8
usb 6-1: device not accepting address 8, error -62
usb 6-1: new full speed USB device using ohci_hcd and address 9
usb 6-1: device not accepting address 9, error -62
ohci_hcd 0000:03:00.0: HC died; cleaning up
ohci_hcd 0000:03:00.1: HC died; cleaning up
ehci_hcd 0000:03:00.2: HC died; cleaning up
pccard: card ejected from slot 0
ohci_hcd 0000:03:00.0: remove, state 0
usb usb6: USB disconnect, address 1
ohci_hcd 0000:03:00.0: USB bus 6 deregistered
ACPI: PCI interrupt for device 0000:03:00.0 disabled
ohci_hcd 0000:03:00.1: remove, state 0
usb usb7: USB disconnect, address 1
ohci_hcd 0000:03:00.1: USB bus 7 deregistered
ACPI: PCI interrupt for device 0000:03:00.1 disabled
ehci_hcd 0000:03:00.2: remove, state 0
usb usb8: USB disconnect, address 1
ehci_hcd 0000:03:00.2: USB bus 8 deregistered
ACPI: PCI interrupt for device 0000:03:00.2 disabled
pccard: CardBus card inserted into slot 0
PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.0 to 64
ohci_hcd 0000:03:00.0: OHCI Host Controller
ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
ohci_hcd 0000:03:00.0: irq 16, io mem 0x48000000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
PCI: Enabling device 0000:03:00.1 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.1 to 64
ohci_hcd 0000:03:00.1: OHCI Host Controller
ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 7
ohci_hcd 0000:03:00.1: irq 16, io mem 0x48001000
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
PCI: Enabling device 0000:03:00.2 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.2[C] -> GSI 17 (level, low) -> IRQ 16
ehci_hcd 0000:03:00.2: EHCI Host Controller
ehci_hcd 0000:03:00.2: new USB bus registered, assigned bus number 8
ehci_hcd 0000:03:00.2: irq 16, io mem 0x48002000
ehci_hcd 0000:03:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb 6-1: new full speed USB device using ohci_hcd and address 3
usb 6-1: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 1:0:0:0: CD-ROM            ONDA     USB Storage      2.31 PQ: 0 ANSI: 2
sr0: scsi-1 drive
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg0 type 5
sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00
sr: Sense Key : No Sense [current] 
sr: Add. Sense: No additional sense information
ohci_hcd 0000:03:00.0: HC died; cleaning up
ohci_hcd 0000:03:00.1: HC died; cleaning up
ehci_hcd 0000:03:00.2: HC died; cleaning up
pccard: card ejected from slot 0
usb 6-1: USB disconnect, address 3
ohci_hcd 0000:03:00.0: leak ed df9e0080 (#87) state 0 (has tds)
scsi 1:0:0:0: rejecting I/O to dead device
scsi 1:0:0:0: rejecting I/O to dead device
scsi 1:0:0:0: rejecting I/O to dead device
scsi 1:0:0:0: rejecting I/O to dead device
ohci_hcd 0000:03:00.0: remove, state 0
usb usb6: USB disconnect, address 1
ohci_hcd 0000:03:00.0: dma_pool_destroy ohci_ed, df9e0000 busy
ohci_hcd 0000:03:00.0: USB bus 6 deregistered
ACPI: PCI interrupt for device 0000:03:00.0 disabled
ohci_hcd 0000:03:00.1: remove, state 0
usb usb7: USB disconnect, address 1
ohci_hcd 0000:03:00.1: USB bus 7 deregistered
ACPI: PCI interrupt for device 0000:03:00.1 disabled
ehci_hcd 0000:03:00.2: remove, state 0
usb usb8: USB disconnect, address 1
ehci_hcd 0000:03:00.2: USB bus 8 deregistered
ACPI: PCI interrupt for device 0000:03:00.2 disabled
pccard: CardBus card inserted into slot 0
PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.0 to 64
ohci_hcd 0000:03:00.0: OHCI Host Controller
ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
ohci_hcd 0000:03:00.0: irq 16, io mem 0x48000000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
PCI: Enabling device 0000:03:00.1 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.1 to 64
ohci_hcd 0000:03:00.1: OHCI Host Controller
ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 7
ohci_hcd 0000:03:00.1: irq 16, io mem 0x48001000
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
PCI: Enabling device 0000:03:00.2 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.2[C] -> GSI 17 (level, low) -> IRQ 16
ehci_hcd 0000:03:00.2: EHCI Host Controller
ehci_hcd 0000:03:00.2: new USB bus registered, assigned bus number 8
ehci_hcd 0000:03:00.2: irq 16, io mem 0x48002000
ehci_hcd 0000:03:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb 6-1: new full speed USB device using ohci_hcd and address 2
usb 6-1: device descriptor read/64, error -62
usb 6-1: device descriptor read/64, error -62
usb 6-1: new full speed USB device using ohci_hcd and address 3
usb 6-1: device descriptor read/64, error -62
usb 6-1: device descriptor read/64, error -62
usb 6-1: new full speed USB device using ohci_hcd and address 4
usb 6-1: device not accepting address 4, error -62
usb 6-1: new full speed USB device using ohci_hcd and address 5
usb 6-1: device not accepting address 5, error -62
usb 6-1: new full speed USB device using ohci_hcd and address 6
usb 6-1: device descriptor read/64, error -62
usb 6-1: device descriptor read/64, error -62
usb 6-1: new full speed USB device using ohci_hcd and address 7
usb 6-1: device descriptor read/64, error -62
usb 6-1: device descriptor read/64, error -62
usb 6-1: new full speed USB device using ohci_hcd and address 8
usb 6-1: device not accepting address 8, error -62
usb 6-1: new full speed USB device using ohci_hcd and address 9
usb 6-1: device not accepting address 9, error -62
ohci_hcd 0000:03:00.0: HC died; cleaning up
ohci_hcd 0000:03:00.1: HC died; cleaning up
ehci_hcd 0000:03:00.2: HC died; cleaning up
pccard: card ejected from slot 0
ohci_hcd 0000:03:00.0: remove, state 0
usb usb6: USB disconnect, address 1
ohci_hcd 0000:03:00.0: USB bus 6 deregistered
ACPI: PCI interrupt for device 0000:03:00.0 disabled
ohci_hcd 0000:03:00.1: remove, state 0
usb usb7: USB disconnect, address 1
ohci_hcd 0000:03:00.1: USB bus 7 deregistered
ACPI: PCI interrupt for device 0000:03:00.1 disabled
ehci_hcd 0000:03:00.2: remove, state 0
usb usb8: USB disconnect, address 1
ehci_hcd 0000:03:00.2: USB bus 8 deregistered
ACPI: PCI interrupt for device 0000:03:00.2 disabled
pccard: CardBus card inserted into slot 0
PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.0 to 64
ohci_hcd 0000:03:00.0: OHCI Host Controller
ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
ohci_hcd 0000:03:00.0: irq 16, io mem 0x48000000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
PCI: Enabling device 0000:03:00.1 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.1 to 64
ohci_hcd 0000:03:00.1: OHCI Host Controller
ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 7
ohci_hcd 0000:03:00.1: irq 16, io mem 0x48001000
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
PCI: Enabling device 0000:03:00.2 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.2[C] -> GSI 17 (level, low) -> IRQ 16
ehci_hcd 0000:03:00.2: EHCI Host Controller
ehci_hcd 0000:03:00.2: new USB bus registered, assigned bus number 8
ehci_hcd 0000:03:00.2: irq 16, io mem 0x48002000
ehci_hcd 0000:03:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb 6-1: new full speed USB device using ohci_hcd and address 2
usb 6-1: device descriptor read/64, error -62
usb 6-1: device descriptor read/64, error -62
usb 6-1: new full speed USB device using ohci_hcd and address 3
usb 6-1: device descriptor read/64, error -62
usb 6-1: device descriptor read/64, error -62
usb 6-1: new full speed USB device using ohci_hcd and address 4
usb 6-1: device not accepting address 4, error -62
usb 6-1: new full speed USB device using ohci_hcd and address 5
usb 6-1: device not accepting address 5, error -62
usb 6-1: new full speed USB device using ohci_hcd and address 6
usb 6-1: device descriptor read/64, error -62
usb 6-1: device descriptor read/64, error -62
usb 6-1: new full speed USB device using ohci_hcd and address 7
usb 6-1: device descriptor read/64, error -62
usb 6-1: device descriptor read/64, error -62
usb 6-1: new full speed USB device using ohci_hcd and address 8
usb 6-1: device not accepting address 8, error -62
usb 6-1: new full speed USB device using ohci_hcd and address 9
usb 6-1: device not accepting address 9, error -62
ohci_hcd 0000:03:00.0: HC died; cleaning up
ohci_hcd 0000:03:00.1: HC died; cleaning up
ehci_hcd 0000:03:00.2: HC died; cleaning up
pccard: card ejected from slot 0
ohci_hcd 0000:03:00.0: remove, state 0
usb usb6: USB disconnect, address 1
ohci_hcd 0000:03:00.0: USB bus 6 deregistered
ACPI: PCI interrupt for device 0000:03:00.0 disabled
ohci_hcd 0000:03:00.1: remove, state 0
usb usb7: USB disconnect, address 1
ohci_hcd 0000:03:00.1: USB bus 7 deregistered
ACPI: PCI interrupt for device 0000:03:00.1 disabled
ehci_hcd 0000:03:00.2: remove, state 0
usb usb8: USB disconnect, address 1
ehci_hcd 0000:03:00.2: USB bus 8 deregistered
ACPI: PCI interrupt for device 0000:03:00.2 disabled
pccard: CardBus card inserted into slot 0
PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.0 to 64
ohci_hcd 0000:03:00.0: OHCI Host Controller
ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
ohci_hcd 0000:03:00.0: irq 16, io mem 0x48000000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
PCI: Enabling device 0000:03:00.1 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.1 to 64
ohci_hcd 0000:03:00.1: OHCI Host Controller
ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 7
ohci_hcd 0000:03:00.1: irq 16, io mem 0x48001000
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
PCI: Enabling device 0000:03:00.2 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.2[C] -> GSI 17 (level, low) -> IRQ 16
ehci_hcd 0000:03:00.2: EHCI Host Controller
ehci_hcd 0000:03:00.2: new USB bus registered, assigned bus number 8
ehci_hcd 0000:03:00.2: irq 16, io mem 0x48002000
ehci_hcd 0000:03:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb 6-1: new full speed USB device using ohci_hcd and address 2
usb 6-1: new full speed USB device using ohci_hcd and address 3
usb 6-1: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 2:0:0:0: CD-ROM            ONDA     USB Storage      2.31 PQ: 0 ANSI: 2
sr0: scsi-1 drive
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg0 type 5
sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00
sr: Sense Key : No Sense [current] 
sr: Add. Sense: No additional sense information
usb 6-1: reset full speed USB device using ohci_hcd and address 3
sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00
sr: Sense Key : No Sense [current] 
sr: Add. Sense: No additional sense information
ohci_hcd 0000:03:00.0: HC died; cleaning up
ohci_hcd 0000:03:00.1: HC died; cleaning up
ehci_hcd 0000:03:00.2: HC died; cleaning up
pccard: card ejected from slot 0
usb 6-1: USB disconnect, address 3
ohci_hcd 0000:03:00.0: leak ed dfa82080 (#87) state 0 (has tds)
scsi 2:0:0:0: rejecting I/O to dead device
scsi 2:0:0:0: rejecting I/O to dead device
scsi 2:0:0:0: rejecting I/O to dead device
scsi 2:0:0:0: rejecting I/O to dead device
ohci_hcd 0000:03:00.0: remove, state 0
usb usb6: USB disconnect, address 1
ohci_hcd 0000:03:00.0: dma_pool_destroy ohci_ed, dfa82000 busy
ohci_hcd 0000:03:00.0: USB bus 6 deregistered
ACPI: PCI interrupt for device 0000:03:00.0 disabled
ohci_hcd 0000:03:00.1: remove, state 0
usb usb7: USB disconnect, address 1
ohci_hcd 0000:03:00.1: USB bus 7 deregistered
ACPI: PCI interrupt for device 0000:03:00.1 disabled
ehci_hcd 0000:03:00.2: remove, state 0
usb usb8: USB disconnect, address 1
ehci_hcd 0000:03:00.2: USB bus 8 deregistered
ACPI: PCI interrupt for device 0000:03:00.2 disabled
pccard: CardBus card inserted into slot 0
PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.0 to 64
ohci_hcd 0000:03:00.0: OHCI Host Controller
ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
ohci_hcd 0000:03:00.0: irq 16, io mem 0x48000000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
PCI: Enabling device 0000:03:00.1 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.1 to 64
ohci_hcd 0000:03:00.1: OHCI Host Controller
ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 7
ohci_hcd 0000:03:00.1: irq 16, io mem 0x48001000
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
PCI: Enabling device 0000:03:00.2 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.2[C] -> GSI 17 (level, low) -> IRQ 16
ehci_hcd 0000:03:00.2: EHCI Host Controller
ehci_hcd 0000:03:00.2: new USB bus registered, assigned bus number 8
ehci_hcd 0000:03:00.2: irq 16, io mem 0x48002000
ehci_hcd 0000:03:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb 6-1: new full speed USB device using ohci_hcd and address 2
usb 6-1: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 3:0:0:0: CD-ROM            ONDA     USB Storage      2.31 PQ: 0 ANSI: 2
sr0: scsi-1 drive
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg0 type 5
sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00
sr: Sense Key : No Sense [current] 
sr: Add. Sense: No additional sense information
ohci_hcd 0000:03:00.0: HC died; cleaning up
ohci_hcd 0000:03:00.1: HC died; cleaning up
ehci_hcd 0000:03:00.2: HC died; cleaning up
pccard: card ejected from slot 0
usb 6-1: USB disconnect, address 2
ohci_hcd 0000:03:00.0: leak ed dfb08080 (#87) state 0 (has tds)
scsi 3:0:0:0: rejecting I/O to dead device
scsi 3:0:0:0: rejecting I/O to dead device
scsi 3:0:0:0: rejecting I/O to dead device
scsi 3:0:0:0: rejecting I/O to dead device
ohci_hcd 0000:03:00.0: remove, state 0
usb usb6: USB disconnect, address 1
ohci_hcd 0000:03:00.0: dma_pool_destroy ohci_ed, dfb08000 busy
ohci_hcd 0000:03:00.0: USB bus 6 deregistered
ACPI: PCI interrupt for device 0000:03:00.0 disabled
ohci_hcd 0000:03:00.1: remove, state 0
usb usb7: USB disconnect, address 1
ohci_hcd 0000:03:00.1: USB bus 7 deregistered
ACPI: PCI interrupt for device 0000:03:00.1 disabled
ehci_hcd 0000:03:00.2: remove, state 0
usb usb8: USB disconnect, address 1
ehci_hcd 0000:03:00.2: USB bus 8 deregistered
ACPI: PCI interrupt for device 0000:03:00.2 disabled
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xef
usb 5-3: new high speed USB device using ehci_hcd and address 2
usb 5-3: configuration #1 chosen from 1 choice
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 4:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
scsi 4:0:0:1: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
scsi 4:0:0:2: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
scsi 4:0:0:3: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
scsi 4:0:0:0: Attached scsi generic sg0 type 0
scsi 4:0:0:1: Attached scsi generic sg1 type 0
scsi 4:0:0:2: Attached scsi generic sg2 type 0
scsi 4:0:0:3: Attached scsi generic sg3 type 0
Driver 'sd' needs updating - please use bus_type methods
sd 4:0:0:0: [sda] Attached SCSI removable disk
sd 4:0:0:1: [sdb] Attached SCSI removable disk
sd 4:0:0:2: [sdc] 2012160 512-byte hardware sectors (1030 MB)
sd 4:0:0:2: [sdc] Write Protect is off
sd 4:0:0:2: [sdc] Mode Sense: 02 00 00 00
sd 4:0:0:2: [sdc] Assuming drive cache: write through
sd 4:0:0:2: [sdc] 2012160 512-byte hardware sectors (1030 MB)
sd 4:0:0:2: [sdc] Write Protect is off
sd 4:0:0:2: [sdc] Mode Sense: 02 00 00 00
sd 4:0:0:2: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 4:0:0:2: [sdc] Attached SCSI removable disk
sd 4:0:0:3: [sdd] Attached SCSI removable disk
pccard: CardBus card inserted into slot 0
PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.0 to 64
ohci_hcd 0000:03:00.0: OHCI Host Controller
ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
ohci_hcd 0000:03:00.0: irq 16, io mem 0x48000000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
PCI: Enabling device 0000:03:00.1 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.1 to 64
ohci_hcd 0000:03:00.1: OHCI Host Controller
ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 7
ohci_hcd 0000:03:00.1: irq 16, io mem 0x48001000
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
PCI: Enabling device 0000:03:00.2 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.2[C] -> GSI 17 (level, low) -> IRQ 16
ehci_hcd 0000:03:00.2: EHCI Host Controller
ehci_hcd 0000:03:00.2: new USB bus registered, assigned bus number 8
ehci_hcd 0000:03:00.2: irq 16, io mem 0x48002000
ehci_hcd 0000:03:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb 6-1: new full speed USB device using ohci_hcd and address 3
usb 6-1: configuration #1 chosen from 1 choice
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 5:0:0:0: CD-ROM            ONDA     USB Storage      2.31 PQ: 0 ANSI: 2
sr0: scsi-1 drive
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg4 type 5
sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00
sr: Sense Key : No Sense [current] 
sr: Add. Sense: No additional sense information
usb 5-3: USB disconnect, address 2
usb 6-1: reset full speed USB device using ohci_hcd and address 3
sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00
sr: Sense Key : No Sense [current] 
sr: Add. Sense: No additional sense information
usb 5-3: new high speed USB device using ehci_hcd and address 3
usb 5-3: configuration #1 chosen from 1 choice
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 6:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
scsi 6:0:0:1: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
scsi 6:0:0:2: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
scsi 6:0:0:3: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
sd 6:0:0:0: [sda] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg0 type 0
sd 6:0:0:1: [sdb] Attached SCSI removable disk
sd 6:0:0:1: Attached scsi generic sg1 type 0
sd 6:0:0:2: [sdc] 2012160 512-byte hardware sectors (1030 MB)
sd 6:0:0:2: [sdc] Write Protect is off
sd 6:0:0:2: [sdc] Mode Sense: 02 00 00 00
sd 6:0:0:2: [sdc] Assuming drive cache: write through
sd 6:0:0:2: [sdc] 2012160 512-byte hardware sectors (1030 MB)
sd 6:0:0:2: [sdc] Write Protect is off
sd 6:0:0:2: [sdc] Mode Sense: 02 00 00 00
sd 6:0:0:2: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 6:0:0:2: [sdc] Attached SCSI removable disk
sd 6:0:0:2: Attached scsi generic sg2 type 0
sd 6:0:0:3: [sdd] Attached SCSI removable disk
sd 6:0:0:3: Attached scsi generic sg3 type 0
usb 6-1: reset full speed USB device using ohci_hcd and address 3
usb 5-3: USB disconnect, address 3
usb 5-3: new high speed USB device using ehci_hcd and address 4
usb 5-3: configuration #1 chosen from 1 choice
scsi7 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 7:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
scsi 7:0:0:1: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
scsi 7:0:0:2: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
scsi 7:0:0:3: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
sd 7:0:0:0: [sda] Attached SCSI removable disk
sd 7:0:0:0: Attached scsi generic sg0 type 0
sd 7:0:0:1: [sdb] Attached SCSI removable disk
sd 7:0:0:1: Attached scsi generic sg1 type 0
sd 7:0:0:2: [sdc] 2012160 512-byte hardware sectors (1030 MB)
sd 7:0:0:2: [sdc] Write Protect is off
sd 7:0:0:2: [sdc] Mode Sense: 02 00 00 00
sd 7:0:0:2: [sdc] Assuming drive cache: write through
sd 7:0:0:2: [sdc] 2012160 512-byte hardware sectors (1030 MB)
sd 7:0:0:2: [sdc] Write Protect is off
sd 7:0:0:2: [sdc] Mode Sense: 02 00 00 00
sd 7:0:0:2: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 7:0:0:2: [sdc] Attached SCSI removable disk
sd 7:0:0:2: Attached scsi generic sg2 type 0
sd 7:0:0:3: [sdd] Attached SCSI removable disk
sd 7:0:0:3: Attached scsi generic sg3 type 0
Se non stacco la scheda il portatile si impalla..!

Qualche idee ?

Grazie !
Shaved
Rampante Reduce
Rampante Reduce
Messaggi: 7738
Iscrizione: lunedì 27 marzo 2006, 18:36

Re: [Driver] Driver onda ET505UP pcmcia

Messaggio da Shaved »

In effetti, la scheda ti viene riconosciuta ed utilizza l'usbserial (sempre che non abbia visto male :D).

Il problema, secondo me, sta sempre nel solito discorso: che viene erroneamente riconosciuta come cd-rom.
La soluzione che conosco io è quella di creare una regola in /etc/udev/rules.d/ (i codici produttore e prodotto ci sono: 19d2 e 2000) che avvii un programma "correttivo" (come i vari usb_modeswitch, icon_switch e HuaweiAktBbo).

Poi ci sarebbe da ricompilare il modulo airprime...

Facendo una ricerca sul forum, ho trovato questo topic (nel quale ho postato anch'io, ma me lo ero dimenticato :-[), http://forum.ubuntu-it.org/viewtopic.ph ... msg1085729, dove un utente spiega i vari passaggi da compiere.

Non dovresti avere difficoltà a seguirlo ;)
Avatar utente
jean-marc
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 253
Iscrizione: venerdì 15 dicembre 2006, 1:11
Località: Castefranco Veneto (TV)

Re: [Driver] Driver onda ET505UP pcmcia

Messaggio da jean-marc »

Ok! provo questa strada...anche se non avrei voluto andare a ritocare moduli del kernel...se bisogna bisogna!
Ti facio sapere il risultato...se risolvo prometto di fare un wiki sulla scheda da propore nel forum  :)
Grazie...Ciao!
Shaved
Rampante Reduce
Rampante Reduce
Messaggi: 7738
Iscrizione: lunedì 27 marzo 2006, 18:36

Re: [Driver] Driver onda ET505UP pcmcia

Messaggio da Shaved »

Buna idea (yes)

Comunque ricompilare quel modulo non è così difficile: l'ho fatto anch'io con Gutsy e non sono proprio un... mago Immagine
Avatar utente
jean-marc
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 253
Iscrizione: venerdì 15 dicembre 2006, 1:11
Località: Castefranco Veneto (TV)

Re: [Driver] Driver onda ET505UP pcmcia

Messaggio da jean-marc »

Ciao!
non so perchè ma sono blocato a:

Codice: Seleziona tutto

9) make -C /lib/modules/`uname -r`/build M=`pwd` { serve a compilare il nuovo modulo
non vuol saperne niente...!
provo lo stesso a andare avanti visto che nel link del topic (quello di andrea boscolo) non c'e quel passaggio.. ???
Shaved
Rampante Reduce
Rampante Reduce
Messaggi: 7738
Iscrizione: lunedì 27 marzo 2006, 18:36

Re: [Driver] Driver onda ET505UP pcmcia

Messaggio da Shaved »

Ho un vago sospetto: usi debian? Potrebbe dipendere da quello :-\

Hai scaricato gli headers e i sorgenti del kernel così come il pacchetto build-essential?

Riesci a postare l'errore?
Avatar utente
jean-marc
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 253
Iscrizione: venerdì 15 dicembre 2006, 1:11
Località: Castefranco Veneto (TV)

Re: [Driver] Driver onda ET505UP pcmcia

Messaggio da jean-marc »

Becatto...Si Debian dipendente... ;)
ecco i messaggi:

Codice: Seleziona tutto

debian:/usr/src/linux-source-2.6.24/drivers/usb/serial# make -C /lib/modules/`uname -r`/build M=`pwd` 
make: *** /lib/modules/2.6.24-1-686/build: No such file or directory.  Stop. 

debian:/usr/src/linux-source-2.6.24/drivers/usb/serial# make -C /lib/modules/`uname -r`/ build M=`pwd` 
make: Entering directory `/lib/modules/2.6.24-1-686' 
make: *** No rule to make target `build'.  Stop. 
make: Leaving directory `/lib/modules/2.6.24-1-686' 
debian:/usr/src/linux-source-2.6.24/drivers/usb/serial#
prima con build attacato ('/build -C) mi dice che non c'e la cartella...
dopo con build stacato ('/ build -C) mi dice niente target?
Avatar utente
jean-marc
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 253
Iscrizione: venerdì 15 dicembre 2006, 1:11
Località: Castefranco Veneto (TV)

Re: [Driver] Driver onda ET505UP pcmcia

Messaggio da jean-marc »

Allora ho mi mancava gli headers...installati...ecco il risultato:

Codice: Seleziona tutto

polux@debian:/usr/src/linux-source-2.6.24/drivers/usb/serial$ make -C /lib/modules/2.6.24-1-686/build M='pwd' 
make: Entering directory `/usr/src/linux-headers-2.6.24-1-686' 
mkdir: impossibile creare la directory `pwd': Permission denied 
scripts/Makefile.build:41: /usr/src/linux-headers-2.6.24-1-686/pwd/Makefile: No such file or directory 
make[1]: *** No rule to make target `/usr/src/linux-headers-2.6.24-1-686/pwd/Makefile'.  Stop. 
make: *** [_module_pwd] Error 2 
make: Leaving directory `/usr/src/linux-headers-2.6.24-1-686' 
polux@debian:/usr/src/linux-source-2.6.24/drivers/usb/serial$ su root 
Parola d'ordine: 
debian:/usr/src/linux-source-2.6.24/drivers/usb/serial# make -C /lib 
lib/   lib64/  
debian:/usr/src/linux-source-2.6.24/drivers/usb/serial# make -C /lib/modules/2.6.24-1-686/build M='pwd' 
make: Entering directory `/usr/src/linux-headers-2.6.24-1-686' 
scripts/Makefile.build:41: /usr/src/linux-headers-2.6.24-1-686/pwd/Makefile: No such file or directory 
make[1]: *** No rule to make target `/usr/src/linux-headers-2.6.24-1-686/pwd/Makefile'.  Stop. 
make: *** [_module_pwd] Error 2 
make: Leaving directory `/usr/src/linux-headers-2.6.24-1-686' 
debian:/usr/src/linux-source-2.6.24/drivers/usb/serial#
Prima mi dice che devo essere root (per make ?...), una volta fatto...
Avatar utente
jean-marc
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 253
Iscrizione: venerdì 15 dicembre 2006, 1:11
Località: Castefranco Veneto (TV)

Re: [Driver] Driver onda ET505UP pcmcia

Messaggio da jean-marc »

Va bene...il problema era le '...shell non accetta le mie.. (mad)!..da casa ho fatto un copia/incolla...ed ecco cosa viene fuori con un tail -f /var/log/syslog
:

Codice: Seleziona tutto

debian:/home/polux# tail -f /var/log/syslog

May 22 12:38:36 debian dhclient: No working leases in persistent database - sleeping.

May 22 12:38:36 debian avahi-autoipd(eth0)[3267]: Found user 'avahi-autoipd' (UID 104) and group 'avahi-autoipd' (GID 109).

May 22 12:38:36 debian avahi-autoipd(eth0)[3267]: Successfully called chroot().

May 22 12:38:36 debian avahi-autoipd(eth0)[3267]: Successfully dropped root privileges.

May 22 12:38:36 debian avahi-autoipd(eth0)[3267]: Starting with address 169.254.6.230

May 22 12:38:40 debian avahi-autoipd(eth0)[3267]: Callout BIND, address 169.254.6.230 on interface eth0

May 22 12:38:41 debian avahi-daemon[2816]: Joining mDNS multicast group on interface eth0.IPv4 with address 169.254.6.230.

May 22 12:38:41 debian avahi-daemon[2816]: New relevant interface eth0.IPv4 for mDNS.

May 22 12:38:41 debian avahi-daemon[2816]: Registering new address record for 169.254.6.230 on eth0.IPv4.

May 22 12:38:44 debian avahi-autoipd(eth0)[3267]: Successfully claimed IP address 169.254.6.230


inserisco la scheda e:
 
May 22 12:39:42 debian kernel: pccard: CardBus card inserted into slot 0

May 22 12:39:42 debian kernel: PCI: Enabling device 0000:03:00.0 (0000 -> 0002)

May 22 12:39:42 debian kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16

May 22 12:39:42 debian kernel: PCI: Setting latency timer of device 0000:03:00.0 to 64

May 22 12:39:42 debian kernel: ohci_hcd 0000:03:00.0: OHCI Host Controller

May 22 12:39:42 debian kernel: ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6

May 22 12:39:42 debian kernel: ohci_hcd 0000:03:00.0: irq 16, io mem 0x48000000

May 22 12:39:42 debian kernel: usb usb6: configuration #1 chosen from 1 choice

May 22 12:39:42 debian kernel: hub 6-0:1.0: USB hub found

May 22 12:39:42 debian kernel: hub 6-0:1.0: 1 port detected

May 22 12:39:42 debian kernel: PCI: Enabling device 0000:03:00.1 (0000 -> 0002)

May 22 12:39:42 debian kernel: ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 16

May 22 12:39:42 debian kernel: PCI: Setting latency timer of device 0000:03:00.1 to 64

May 22 12:39:42 debian kernel: ohci_hcd 0000:03:00.1: OHCI Host Controller

May 22 12:39:42 debian kernel: ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 7

May 22 12:39:42 debian kernel: ohci_hcd 0000:03:00.1: irq 16, io mem 0x48001000

May 22 12:39:42 debian kernel: usb usb7: configuration #1 chosen from 1 choice

May 22 12:39:42 debian kernel: hub 7-0:1.0: USB hub found

May 22 12:39:42 debian kernel: hub 7-0:1.0: 1 port detected

May 22 12:39:42 debian kernel: PCI: Enabling device 0000:03:00.2 (0000 -> 0002)

May 22 12:39:42 debian kernel: ACPI: PCI Interrupt 0000:03:00.2[C] -> GSI 17 (level, low) -> IRQ 16

May 22 12:39:42 debian kernel: ehci_hcd 0000:03:00.2: EHCI Host Controller

May 22 12:39:42 debian kernel: ehci_hcd 0000:03:00.2: new USB bus registered, assigned bus number 8

May 22 12:39:42 debian kernel: ehci_hcd 0000:03:00.2: irq 16, io mem 0x48002000

May 22 12:39:42 debian kernel: ehci_hcd 0000:03:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

May 22 12:39:42 debian kernel: usb usb8: configuration #1 chosen from 1 choice

May 22 12:39:42 debian kernel: hub 8-0:1.0: USB hub found

May 22 12:39:42 debian kernel: hub 8-0:1.0: 2 ports detected

May 22 12:39:42 debian NetworkManager: <debug> [1211452782.855741] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/pci_1033_35_1'). 

May 22 12:39:42 debian NetworkManager: <debug> [1211452782.887815] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/pci_1033_35_2'). 

May 22 12:39:42 debian NetworkManager: <debug> [1211452782.919062] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/pci_1033_e0_0'). 

May 22 12:39:43 debian NetworkManager: <debug> [1211452783.008620] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_03_00_0'). 

May 22 12:39:43 debian NetworkManager: <debug> [1211452783.063656] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_03_00_1'). 

May 22 12:39:43 debian NetworkManager: <debug> [1211452783.135922] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_03_00_2'). 

May 22 12:39:43 debian NetworkManager: <debug> [1211452783.386475] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_03_00_0_if0'). 

May 22 12:39:43 debian NetworkManager: <debug> [1211452783.572790] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_03_00_1_if0'). 

May 22 12:39:43 debian NetworkManager: <debug> [1211452783.603692] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_03_00_2_if0'). 

May 22 12:39:43 debian NetworkManager: <debug> [1211452783.611156] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_03_00_0_usbraw'). 

May 22 12:39:43 debian NetworkManager: <debug> [1211452783.620461] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_03_00_1_usbraw'). 

May 22 12:39:43 debian NetworkManager: <debug> [1211452783.627861] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_03_00_2_usbraw'). 

May 22 12:39:46 debian kernel: usb 6-1: new full speed USB device using ohci_hcd and address 2

May 22 12:39:46 debian kernel: usb 6-1: configuration #1 chosen from 1 choice

May 22 12:39:47 debian kernel: usbcore: registered new interface driver usbserial

May 22 12:39:47 debian kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for generic

May 22 12:39:47 debian kernel: usbcore: registered new interface driver usbserial_generic

May 22 12:39:47 debian kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core

May 22 12:39:47 debian kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for airprime

May 22 12:39:47 debian kernel: usbcore: registered new interface driver airprime

May 22 12:39:47 debian NetworkManager: <debug> [1211452787.144729] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2000_noserial'). 

May 22 12:39:47 debian kernel: Initializing USB Mass Storage driver...

May 22 12:39:47 debian kernel: scsi0 : SCSI emulation for USB Mass Storage devices

May 22 12:39:47 debian kernel: usbcore: registered new interface driver usb-storage

May 22 12:39:47 debian kernel: USB Mass Storage support registered.

May 22 12:39:47 debian kernel: usb-storage: device found at 2

May 22 12:39:47 debian kernel: usb-storage: waiting for device to settle before scanning

May 22 12:39:47 debian NetworkManager: <debug> [1211452787.366899] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2000_noserial_if0'). 

May 22 12:39:47 debian NetworkManager: <debug> [1211452787.382439] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2000_noserial_usbraw'). 

May 22 12:39:52 debian kernel: usb-storage: device scan complete

May 22 12:39:52 debian kernel: scsi 0:0:0:0: CD-ROM            ONDA     USB Storage      2.31 PQ: 0 ANSI: 2

May 22 12:39:52 debian kernel: Driver 'sr' needs updating - please use bus_type methods

May 22 12:39:52 debian kernel: sr0: scsi-1 drive

May 22 12:39:52 debian kernel: sr 0:0:0:0: Attached scsi CD-ROM sr0

May 22 12:39:52 debian NetworkManager: <debug> [1211452792.585936] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2000_noserial_if0_scsi_host'). 

May 22 12:39:52 debian NetworkManager: <debug> [1211452792.591203] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2000_noserial_if0_scsi_host_scsi_device_lun0'). 

May 22 12:39:52 debian kernel: sr 0:0:0:0: Attached scsi generic sg0 type 5

May 22 12:39:52 debian NetworkManager: <debug> [1211452792.724800] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2000_noserial_if0_scsi_host_scsi_device_lun0_scsi_generic'). 

May 22 12:39:52 debian NetworkManager: <debug> [1211452792.911452] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/storage_serial_ONDA_USB_Storage_0_0'). 

May 22 12:39:52 debian kernel: sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00

May 22 12:39:52 debian kernel: sr: Sense Key : No Sense [current] 

May 22 12:39:52 debian kernel: sr: Add. Sense: No additional sense information

May 22 12:40:53 debian kernel: usb 6-1: reset full speed USB device using ohci_hcd and address 2

May 22 12:40:53 debian kernel: sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00

May 22 12:40:53 debian kernel: sr: Sense Key : No Sense [current] 

May 22 12:40:53 debian kernel: sr: Add. Sense: No additional sense information

May 22 12:41:53 debian kernel: usb 6-1: reset full speed USB device using ohci_hcd and address 2

May 22 12:43:38 debian dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3

May 22 12:43:41 debian dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4

May 22 12:43:45 debian dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5

May 22 12:43:50 debian dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13

May 22 12:44:03 debian dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14

May 22 12:44:17 debian dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8

May 22 12:44:25 debian dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14

May 22 12:44:39 debian dhclient: No DHCPOFFERS received.

May 22 12:44:39 debian dhclient: No working leases in persistent database - sleeping.
Insomma sempre peggio mi sa!  ::)

Comunque si come la mia debian mi rompe anche x altri drivers mi sa que tornero sulla 'più simplice' kubuntu...anche se devo ammetere il fatto che ogni sei mesi mi veniva il stress della novità...
giosimar
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1249
Iscrizione: martedì 7 novembre 2006, 21:30

Re: [Driver] Driver onda ET505UP pcmcia

Messaggio da giosimar »

ma, alla fine, sei riuscito a farla funzionare?
http://xoomer.alice.it/giosimar/ubuntulinux.swf
Prima di dirmi cosa è giusto e cose è sbagliato, paga l'IRPEF.
Avatar utente
jean-marc
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 253
Iscrizione: venerdì 15 dicembre 2006, 1:11
Località: Castefranco Veneto (TV)

Re: [Driver] Driver onda ET505UP pcmcia

Messaggio da jean-marc »

Veramente l'avevo lasciata da parte...in attesa...ed ho visto (proprio oggi !!!) che sei riuscito a farla andare...
adesso riprovo...
ciao,
Avatar utente
jean-marc
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 253
Iscrizione: venerdì 15 dicembre 2006, 1:11
Località: Castefranco Veneto (TV)

Re: [Driver] Driver onda ET505UP pcmcia

Messaggio da jean-marc »

Ciao giosimar!
Ho seguito la guida di roby78 dove scrivi di essere riuscito a fare andare la et505up, sanza risultato...
Tu hai seguito la guida 'alla lettera' ?. Io nel file di conf di usb_switch-0.9.4 ho provato sia con idproduct=2000 che idproduct=0002, lo stesso per il rules di udev...
E questo usb_switch bisogna installarlo come detto sul suo sito??? (nella guida di roby78 non ce ne traccia...)
Qui sotto aggiungo il tail -f /var/log/syslog del risultato:

Codice: Seleziona tutto

Jul 13 17:36:56 alibaba NetworkManager: <debug> [1215963416.440397] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/pci_1033_e0_0').
Jul 13 17:37:04 alibaba kernel: [ 4148.987437] mtrr: no MTRR for e0000000,8000000 found
Jul 13 17:37:04 alibaba kdm[7379]: X server for display :0 terminated unexpectedly
Jul 13 17:37:06 alibaba kernel: [ 4150.658280] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
Jul 13 17:37:06 alibaba kernel: [ 4150.658789] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
Jul 13 17:37:06 alibaba kernel: [ 4150.659225] agpgart: Putting AGP V3 device at 0000:01:05.0 into 8x mode
Jul 13 17:37:07 alibaba kernel: [ 4151.862389] [drm] Setting GART location based on new memory map
Jul 13 17:37:07 alibaba kernel: [ 4151.862411] [drm] Loading R200 Microcode
Jul 13 17:37:07 alibaba kernel: [ 4151.862461] [drm] writeback test succeeded in 1 usecs
Jul 13 17:37:42 alibaba NetworkManager: <info>  Updating allowed wireless network lists.
Jul 13 17:38:05 alibaba kernel: [ 4209.539414] pccard: CardBus card inserted into slot 0
Jul 13 17:38:05 alibaba kernel: [ 4209.539864] PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
Jul 13 17:38:05 alibaba kernel: [ 4209.539876] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16
Jul 13 17:38:05 alibaba kernel: [ 4209.539923] PCI: Setting latency timer of device 0000:03:00.0 to 64
Jul 13 17:38:05 alibaba kernel: [ 4209.539928] ohci_hcd 0000:03:00.0: OHCI Host Controller
Jul 13 17:38:05 alibaba kernel: [ 4209.540009] ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
Jul 13 17:38:05 alibaba kernel: [ 4209.540038] ohci_hcd 0000:03:00.0: irq 16, io mem 0x48000000
Jul 13 17:38:05 alibaba kernel: [ 4209.627062] usb usb6: configuration #1 chosen from 1 choice
Jul 13 17:38:05 alibaba kernel: [ 4209.628160] hub 6-0:1.0: USB hub found
Jul 13 17:38:05 alibaba kernel: [ 4209.628608] hub 6-0:1.0: 1 port detected
Jul 13 17:38:05 alibaba NetworkManager: <debug> [1215963485.395343] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/pci_1033_35_1').
Jul 13 17:38:05 alibaba NetworkManager: <debug> [1215963485.445899] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_03_00_0').
Jul 13 17:38:05 alibaba kernel: [ 4209.731352] PCI: Enabling device 0000:03:00.1 (0000 -> 0002)
Jul 13 17:38:05 alibaba kernel: [ 4209.731373] ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 16
Jul 13 17:38:05 alibaba kernel: [ 4209.731425] PCI: Setting latency timer of device 0000:03:00.1 to 64
Jul 13 17:38:05 alibaba kernel: [ 4209.731430] ohci_hcd 0000:03:00.1: OHCI Host Controller
Jul 13 17:38:05 alibaba kernel: [ 4209.731509] ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 7
Jul 13 17:38:05 alibaba kernel: [ 4209.731539] ohci_hcd 0000:03:00.1: irq 16, io mem 0x48001000
Jul 13 17:38:05 alibaba kernel: [ 4209.817812] usb usb7: configuration #1 chosen from 1 choice
Jul 13 17:38:05 alibaba kernel: [ 4209.819323] hub 7-0:1.0: USB hub found
Jul 13 17:38:05 alibaba kernel: [ 4209.820226] hub 7-0:1.0: 1 port detected
Jul 13 17:38:05 alibaba NetworkManager: <debug> [1215963485.657029] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/pci_1033_35_2').
Jul 13 17:38:05 alibaba kernel: [ 4209.922954] PCI: Enabling device 0000:03:00.2 (0000 -> 0002)
Jul 13 17:38:05 alibaba kernel: [ 4209.922979] ACPI: PCI Interrupt 0000:03:00.2[C] -> GSI 17 (level, low) -> IRQ 16
Jul 13 17:38:05 alibaba kernel: [ 4209.923044] ehci_hcd 0000:03:00.2: EHCI Host Controller
Jul 13 17:38:05 alibaba kernel: [ 4209.923122] ehci_hcd 0000:03:00.2: new USB bus registered, assigned bus number 8
Jul 13 17:38:05 alibaba kernel: [ 4209.923194] ehci_hcd 0000:03:00.2: irq 16, io mem 0x48002000
Jul 13 17:38:05 alibaba kernel: [ 4209.934649] ehci_hcd 0000:03:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jul 13 17:38:05 alibaba kernel: [ 4209.934899] usb usb8: configuration #1 chosen from 1 choice
Jul 13 17:38:05 alibaba kernel: [ 4209.934965] hub 8-0:1.0: USB hub found
Jul 13 17:38:05 alibaba kernel: [ 4209.934982] hub 8-0:1.0: 2 ports detected
Jul 13 17:38:05 alibaba NetworkManager: <debug> [1215963485.977549] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_03_00_0_if0').
Jul 13 17:38:06 alibaba NetworkManager: <debug> [1215963486.050323] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_03_00_1').
Jul 13 17:38:06 alibaba NetworkManager: <debug> [1215963486.146727] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/pci_1033_e0_0').
Jul 13 17:38:06 alibaba NetworkManager: <debug> [1215963486.175994] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_03_00_2').
Jul 13 17:38:06 alibaba NetworkManager: <debug> [1215963486.277760] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_03_00_1_if0').
Jul 13 17:38:06 alibaba NetworkManager: <debug> [1215963486.350362] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_03_00_2_if0').
Jul 13 17:38:09 alibaba kernel: [ 4213.966808] usb 6-1: new full speed USB device using ohci_hcd and address 2
Jul 13 17:38:09 alibaba kernel: [ 4214.178726] usb 6-1: configuration #1 chosen from 1 choice
Jul 13 17:38:09 alibaba kernel: [ 4214.182938] airprime 6-1:1.0: airprime converter detected
Jul 13 17:38:09 alibaba kernel: [ 4214.183302] usb 6-1: airprime converter now attached to ttyUSB0
Jul 13 17:38:09 alibaba kernel: [ 4214.183608] usb 6-1: airprime converter now attached to ttyUSB1
Jul 13 17:38:09 alibaba kernel: [ 4214.183947] usb 6-1: airprime converter now attached to ttyUSB2
Jul 13 17:38:09 alibaba kernel: [ 4214.188668] usbcore: deregistering interface driver airprime
Jul 13 17:38:09 alibaba kernel: [ 4214.189321] airprime ttyUSB0: airprime converter now disconnected from ttyUSB0
Jul 13 17:38:09 alibaba kernel: [ 4214.189935] airprime ttyUSB1: airprime converter now disconnected from ttyUSB1
Jul 13 17:38:09 alibaba kernel: [ 4214.190591] airprime ttyUSB2: airprime converter now disconnected from ttyUSB2
Jul 13 17:38:09 alibaba kernel: [ 4214.190623] airprime 6-1:1.0: device disconnected
Jul 13 17:38:09 alibaba kernel: [ 4214.192550] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial deregistering driver airprime
Jul 13 17:38:09 alibaba kernel: [ 4214.204588] usbcore: deregistering interface driver usb-storage
Jul 13 17:38:09 alibaba NetworkManager: <debug> [1215963489.973036] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_5e3_710_04331_if0_scsi_host_scsi_device_lun0_scsi_generic').
Jul 13 17:38:10 alibaba NetworkManager: <debug> [1215963490.045783] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2000_noserial').
Jul 13 17:38:10 alibaba NetworkManager: <debug> [1215963490.089095] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/storage_serial_Generic_STORAGE_DEVICE_04331_0_0').
Jul 13 17:38:10 alibaba NetworkManager: <debug> [1215963490.103996] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_5e3_710_04331_if0_scsi_host_scsi_device_lun0').
Jul 13 17:38:10 alibaba NetworkManager: <debug> [1215963490.106798] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_5e3_710_04331_if0_scsi_host_scsi_device_lun1').
Jul 13 17:38:10 alibaba NetworkManager: <debug> [1215963490.109809] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_5e3_710_04331_if0_scsi_host_scsi_device_lun2').
Jul 13 17:38:10 alibaba NetworkManager: <debug> [1215963490.112811] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_5e3_710_04331_if0_scsi_host_scsi_device_lun3').
Jul 13 17:38:10 alibaba NetworkManager: <debug> [1215963490.115449] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_5e3_710_04331_if0_scsi_host').
Jul 13 17:38:10 alibaba NetworkManager: <debug> [1215963490.137075] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_5e3_710_04331_if0_scsi_host_scsi_device_lun1_scsi_generic').
Jul 13 17:38:10 alibaba NetworkManager: <debug> [1215963490.183571] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/storage_serial_Generic_STORAGE_DEVICE_04331_0_1').
Jul 13 17:38:10 alibaba NetworkManager: <debug> [1215963490.207734] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_5e3_710_04331_if0_scsi_host_scsi_device_lun2_scsi_generic').
Jul 13 17:38:10 alibaba NetworkManager: <debug> [1215963490.246632] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_060E_A36A').
Jul 13 17:38:10 alibaba NetworkManager: <debug> [1215963490.287996] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/storage_serial_Generic_STORAGE_DEVICE_04331_0_2').
Jul 13 17:38:10 alibaba NetworkManager: <debug> [1215963490.325190] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_5e3_710_04331_if0_scsi_host_scsi_device_lun3_scsi_generic').
Jul 13 17:38:10 alibaba NetworkManager: <debug> [1215963490.371550] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/storage_serial_Generic_STORAGE_DEVICE_04331_0_3').
Jul 13 17:38:10 alibaba kernel: [ 4214.626973] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for airprime
Jul 13 17:38:10 alibaba kernel: [ 4214.627628] airprime 6-1:1.0: airprime converter detected
Jul 13 17:38:10 alibaba kernel: [ 4214.628446] usb 6-1: airprime converter now attached to ttyUSB0
Jul 13 17:38:10 alibaba kernel: [ 4214.629307] usb 6-1: airprime converter now attached to ttyUSB1
Jul 13 17:38:10 alibaba kernel: [ 4214.630369] usb 6-1: airprime converter now attached to ttyUSB2
Jul 13 17:38:10 alibaba kernel: [ 4214.630919] usbcore: registered new interface driver airprime
Jul 13 17:38:10 alibaba NetworkManager: <debug> [1215963490.668130] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2000_noserial_if0').
Jul 13 17:38:10 alibaba NetworkManager: <debug> [1215963490.732938] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2000_noserial_if0_serial_usb_0').
Jul 13 17:38:10 alibaba NetworkManager: <debug> [1215963490.759493] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2000_noserial_if0_serial_usb_0').
Jul 13 17:38:10 alibaba NetworkManager: <debug> [1215963490.779069] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2000_noserial_if0_serial_usb_1').
Jul 13 17:38:10 alibaba NetworkManager: <debug> [1215963490.880093] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2000_noserial_if0_serial_usb_2').
Jul 13 17:38:10 alibaba NetworkManager: <debug> [1215963490.903044] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2000_noserial_if0_serial_usb_1').
Jul 13 17:38:10 alibaba NetworkManager: <debug> [1215963490.921706] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2000_noserial_if0_serial_usb_2').
Jul 13 17:38:10 alibaba NetworkManager: <debug> [1215963490.973712] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2000_noserial_if0_serial_usb_0').
Jul 13 17:38:11 alibaba NetworkManager: <debug> [1215963491.020884] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2000_noserial_if0_serial_usb_1').
Jul 13 17:38:11 alibaba NetworkManager: <debug> [1215963491.049242] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2000_noserial_if0_serial_usb_2').
Jul 13 17:38:33 alibaba kernel: [ 4238.196218] usb 6-1: USB disconnect, address 2
Jul 13 17:38:33 alibaba kernel: [ 4238.197129] airprime ttyUSB0: airprime converter now disconnected from ttyUSB0
Jul 13 17:38:33 alibaba kernel: [ 4238.197761] airprime ttyUSB1: airprime converter now disconnected from ttyUSB1
Jul 13 17:38:33 alibaba kernel: [ 4238.198396] airprime ttyUSB2: airprime converter now disconnected from ttyUSB2
Jul 13 17:38:33 alibaba kernel: [ 4238.198438] airprime 6-1:1.0: device disconnected
Jul 13 17:38:34 alibaba NetworkManager: <debug> [1215963514.009076] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2000_noserial_if0_serial_usb_0').
Jul 13 17:38:34 alibaba NetworkManager: <debug> [1215963514.018606] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2000_noserial_if0_serial_usb_1').
Jul 13 17:38:34 alibaba NetworkManager: <debug> [1215963514.053388] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2000_noserial_if0_serial_usb_2').
Jul 13 17:38:34 alibaba NetworkManager: <debug> [1215963514.075244] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2000_noserial_if0').
Jul 13 17:38:34 alibaba NetworkManager: <debug> [1215963514.090481] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2000_noserial').
Jul 13 17:38:35 alibaba kernel: [ 4239.780565] usb 6-1: new full speed USB device using ohci_hcd and address 3
Jul 13 17:38:35 alibaba kernel: [ 4239.983379] usb 6-1: config 1 has an invalid interface number: 4 but max is 3
Jul 13 17:38:35 alibaba kernel: [ 4239.983392] usb 6-1: config 1 has no interface number 0
Jul 13 17:38:35 alibaba kernel: [ 4239.992542] usb 6-1: configuration #1 chosen from 1 choice
Jul 13 17:38:35 alibaba kernel: [ 4239.995967] airprime 6-1:1.1: airprime converter detected
Jul 13 17:38:35 alibaba kernel: [ 4239.996426] usb 6-1: airprime converter now attached to ttyUSB0
Jul 13 17:38:35 alibaba kernel: [ 4239.996737] usb 6-1: airprime converter now attached to ttyUSB1
Jul 13 17:38:35 alibaba kernel: [ 4239.997056] usb 6-1: airprime converter now attached to ttyUSB2
Jul 13 17:38:35 alibaba kernel: [ 4240.005223] airprime 6-1:1.2: airprime converter detected
Jul 13 17:38:35 alibaba kernel: [ 4240.005597] usb 6-1: airprime converter now attached to ttyUSB3
Jul 13 17:38:35 alibaba kernel: [ 4240.005909] usb 6-1: airprime converter now attached to ttyUSB4
Jul 13 17:38:35 alibaba kernel: [ 4240.006226] usb 6-1: airprime converter now attached to ttyUSB5
Jul 13 17:38:35 alibaba kernel: [ 4240.012418] airprime 6-1:1.3: airprime converter detected
Jul 13 17:38:35 alibaba kernel: [ 4240.012791] usb 6-1: airprime converter now attached to ttyUSB6
Jul 13 17:38:35 alibaba kernel: [ 4240.013146] usb 6-1: airprime converter now attached to ttyUSB7
Jul 13 17:38:35 alibaba kernel: [ 4240.013454] usb 6-1: airprime converter now attached to ttyUSB8
Jul 13 17:38:35 alibaba kernel: [ 4240.017340] airprime 6-1:1.4: airprime converter detected
Jul 13 17:38:35 alibaba kernel: [ 4240.017722] usb 6-1: airprime converter now attached to ttyUSB9
Jul 13 17:38:35 alibaba kernel: [ 4240.018051] usb 6-1: airprime converter now attached to ttyUSB10
Jul 13 17:38:35 alibaba kernel: [ 4240.018382] usb 6-1: airprime converter now attached to ttyUSB11
Jul 13 17:38:35 alibaba NetworkManager: <debug> [1215963515.863360] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2_noserial').
Jul 13 17:38:36 alibaba NetworkManager: <debug> [1215963516.538266] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2_noserial_if2').
Jul 13 17:38:36 alibaba NetworkManager: <debug> [1215963516.859866] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2_noserial_if3').
Jul 13 17:38:36 alibaba NetworkManager: <debug> [1215963516.930176] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2_noserial_if4').
Jul 13 17:38:37 alibaba NetworkManager: <debug> [1215963517.003086] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2_noserial_if1').
Jul 13 17:38:37 alibaba NetworkManager: <debug> [1215963517.097610] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2_noserial_if2_serial_usb_3').
Jul 13 17:38:37 alibaba NetworkManager: <debug> [1215963517.181368] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2_noserial_if2_serial_usb_5').
Jul 13 17:38:37 alibaba NetworkManager: <debug> [1215963517.198256] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2_noserial_if2_serial_usb_4').
Jul 13 17:38:37 alibaba NetworkManager: <debug> [1215963517.277134] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2_noserial_if1_serial_usb_0').
Jul 13 17:38:37 alibaba NetworkManager: <debug> [1215963517.290219] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2_noserial_if1_serial_usb_1').
Jul 13 17:38:37 alibaba NetworkManager: <debug> [1215963517.307253] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2_noserial_if1_serial_usb_2').
Jul 13 17:38:37 alibaba NetworkManager: <debug> [1215963517.341158] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2_noserial_if3_serial_usb_7').
Jul 13 17:38:37 alibaba NetworkManager: <debug> [1215963517.375775] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2_noserial_if3_serial_usb_6').
Jul 13 17:38:37 alibaba NetworkManager: <debug> [1215963517.380399] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2_noserial_if3_serial_usb_8').
Jul 13 17:38:37 alibaba NetworkManager: <debug> [1215963517.385746] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2_noserial_if4_serial_usb_9').
Jul 13 17:38:37 alibaba NetworkManager: <debug> [1215963517.390372] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2_noserial_if4_serial_usb_10').
Jul 13 17:38:37 alibaba NetworkManager: <debug> [1215963517.395197] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2_noserial_if4_serial_usb_11').

[1]+  Stopped                 tail -f /var/log/syslog
 
Qualche idee?
Ciao!
giosimar
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1249
Iscrizione: martedì 7 novembre 2006, 21:30

Re: [Driver] Driver onda ET505UP pcmcia

Messaggio da giosimar »

io ho seguito "alla lettera" (salvo le versioni del kernel, che sono un po' confusionarie...)

piuttosto, ho notato che con il 2.6.24.16 funziona benissimo, con il .19 no.
http://xoomer.alice.it/giosimar/ubuntulinux.swf
Prima di dirmi cosa è giusto e cose è sbagliato, paga l'IRPEF.
Avatar utente
jean-marc
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 253
Iscrizione: venerdì 15 dicembre 2006, 1:11
Località: Castefranco Veneto (TV)

Re: [Driver] Driver onda ET505UP pcmcia

Messaggio da jean-marc »

Grazie per l'info!...Ho proprio i due kernel e ovviamente il sistema boot sul .19!
adesso provo con il .16!
Ciao!
Avatar utente
jean-marc
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 253
Iscrizione: venerdì 15 dicembre 2006, 1:11
Località: Castefranco Veneto (TV)

Re: [Driver] Driver onda ET505UP pcmcia

Messaggio da jean-marc »

Bene...Sembra andare!...il problema adesso e che avviando wvdial:

Codice: Seleziona tutto

polux@alibaba:~/Scrivania $ wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATX3
ATX3
ERROR
--> Bad init string.
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATX3
ATX3
ERROR
--> Bad init string.
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATX3
ATX3
ERROR
--> Bad init string.
 
bohh...!!!...???
Avatar utente
jean-marc
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 253
Iscrizione: venerdì 15 dicembre 2006, 1:11
Località: Castefranco Veneto (TV)

Re: [Driver] Driver onda ET505UP pcmcia

Messaggio da jean-marc »

ciao!
Mi sa che la sim era inserita male...comunque nel prosseguire la mia "battaglia" del momento ecco cosa adesso succede lanciando wvdial:

Codice: Seleziona tutto

--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATX3
ATX3
OK
--> Sending: AT+COPS?
AT+COPS?
+COPS: 0
OK
--> Sending: AT+CGDCONT=1,"IP","ibox.tim.it",,0,0
AT+CGDCONT=1,"IP","ibox.tim.it",,0,0
OK
--> Modem initialized.
--> Sending: ATM1L3DT*99#
--> Waiting for carrier.
ATM1L3DT*99#
CONNECT
--> Carrier detected.  Starting PPP immediately.
--> Starting pppd at Tue Jul 15 15:11:09 2008
--> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
--> --> PAP (Password Authentication Protocol) may be flaky.
--> Warning: Could not modify /etc/ppp/chap-secrets: Permission denied
--> --> CHAP (Challenge Handshake) may be flaky.
--> Pid of pppd: 8367
--> Using interface ppp0
--> pppd: ��[06][08][10]�[06][08]
--> pppd: ��[06][08][10]�[06][08]
--> pppd: ��[06][08][10]�[06][08]
--> pppd: ��[06][08][10]�[06][08]
--> pppd: ��[06][08][10]�[06][08]
--> Disconnecting at Tue Jul 15 15:11:40 2008
--> The PPP daemon has died: A modem hung up the phone (exit code = 16)
--> man pppd explains pppd error codes in more detail.
--> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information.
Se riprovo un altra volta :

Codice: Seleziona tutto

polux@alibaba:~$ wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
--> Re-Sending: ATZ
--> Modem not responding.
Con gcom :

Codice: Seleziona tutto

polux@alibaba:~$ gcom -d /dev/ttyUSB3
 ***SIM ERROR***
Check device port configuration.
Check SIM is inserted
Test SIM in a mobile phone?
Questo invece e il solito tail -f /var/log/syslog :

Codice: Seleziona tutto

Jul 15 14:59:24 alibaba kernel: [   70.175210] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 16 (level, low) -> IRQ 17
Jul 15 14:59:24 alibaba kernel: [   70.177453] [drm] Initialized radeon 1.28.0 20060524 on minor 0
Jul 15 14:59:24 alibaba NetworkManager: <debug> [1216126764.280165] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/pci_1002_5835_drm_r200_card0').
Jul 15 14:59:25 alibaba kernel: [   71.438386] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
Jul 15 14:59:25 alibaba kernel: [   71.440256] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
Jul 15 14:59:25 alibaba kernel: [   71.441743] agpgart: Putting AGP V3 device at 0000:01:05.0 into 8x mode
Jul 15 14:59:26 alibaba kernel: [   72.665544] [drm] Setting GART location based on new memory map
Jul 15 14:59:26 alibaba kernel: [   72.665567] [drm] Loading R200 Microcode
Jul 15 14:59:26 alibaba kernel: [   72.665617] [drm] writeback test succeeded in 1 usecs
Jul 15 15:00:26 alibaba NetworkManager: <info>  Updating allowed wireless network lists.
Jul 15 15:00:46 alibaba kernel: [  152.150454] pccard: CardBus card inserted into slot 0
Jul 15 15:00:46 alibaba kernel: [  152.150898] PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
Jul 15 15:00:46 alibaba kernel: [  152.150909] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16
Jul 15 15:00:46 alibaba kernel: [  152.150956] PCI: Setting latency timer of device 0000:03:00.0 to 64
Jul 15 15:00:46 alibaba kernel: [  152.150962] ohci_hcd 0000:03:00.0: OHCI Host Controller
Jul 15 15:00:46 alibaba kernel: [  152.151035] ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
Jul 15 15:00:46 alibaba kernel: [  152.151067] ohci_hcd 0000:03:00.0: irq 16, io mem 0x48000000
Jul 15 15:00:46 alibaba kernel: [  152.237997] usb usb6: configuration #1 chosen from 1 choice
Jul 15 15:00:46 alibaba kernel: [  152.240358] hub 6-0:1.0: USB hub found
Jul 15 15:00:46 alibaba kernel: [  152.241528] hub 6-0:1.0: 1 port detected
Jul 15 15:00:46 alibaba NetworkManager: <debug> [1216126846.470431] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/pci_1033_35_1').
Jul 15 15:00:46 alibaba NetworkManager: <debug> [1216126846.522238] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_03_00_0').
Jul 15 15:00:46 alibaba kernel: [  152.346754] PCI: Enabling device 0000:03:00.1 (0000 -> 0002)
Jul 15 15:00:46 alibaba kernel: [  152.346773] ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 16
Jul 15 15:00:46 alibaba kernel: [  152.346822] PCI: Setting latency timer of device 0000:03:00.1 to 64
Jul 15 15:00:46 alibaba kernel: [  152.346828] ohci_hcd 0000:03:00.1: OHCI Host Controller
Jul 15 15:00:46 alibaba kernel: [  152.346903] ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 7
Jul 15 15:00:46 alibaba kernel: [  152.346932] ohci_hcd 0000:03:00.1: irq 16, io mem 0x48001000
Jul 15 15:00:46 alibaba kernel: [  152.432680] usb usb7: configuration #1 chosen from 1 choice
Jul 15 15:00:46 alibaba kernel: [  152.434377] hub 7-0:1.0: USB hub found
Jul 15 15:00:46 alibaba kernel: [  152.435507] hub 7-0:1.0: 1 port detected
Jul 15 15:00:46 alibaba kernel: [  152.538166] PCI: Enabling device 0000:03:00.2 (0000 -> 0002)
Jul 15 15:00:46 alibaba kernel: [  152.538187] ACPI: PCI Interrupt 0000:03:00.2[C] -> GSI 17 (level, low) -> IRQ 16
Jul 15 15:00:46 alibaba kernel: [  152.538237] ehci_hcd 0000:03:00.2: EHCI Host Controller
Jul 15 15:00:46 alibaba kernel: [  152.538318] ehci_hcd 0000:03:00.2: new USB bus registered, assigned bus number 8
Jul 15 15:00:46 alibaba kernel: [  152.538406] ehci_hcd 0000:03:00.2: irq 16, io mem 0x48002000
Jul 15 15:00:46 alibaba kernel: [  152.549681] ehci_hcd 0000:03:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jul 15 15:00:46 alibaba kernel: [  152.549902] usb usb8: configuration #1 chosen from 1 choice
Jul 15 15:00:46 alibaba kernel: [  152.549965] hub 8-0:1.0: USB hub found
Jul 15 15:00:46 alibaba kernel: [  152.549983] hub 8-0:1.0: 2 ports detected
Jul 15 15:00:46 alibaba NetworkManager: <debug> [1216126846.768800] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/pci_1033_35_2').
Jul 15 15:00:46 alibaba NetworkManager: <debug> [1216126846.972639] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_03_00_0_if0').
Jul 15 15:00:47 alibaba NetworkManager: <debug> [1216126847.028962] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_03_00_1').
Jul 15 15:00:47 alibaba NetworkManager: <debug> [1216126847.075351] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/pci_1033_e0_0').
Jul 15 15:00:47 alibaba NetworkManager: <debug> [1216126847.154425] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_03_00_2').
Jul 15 15:00:47 alibaba NetworkManager: <debug> [1216126847.412639] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_03_00_1_if0').
Jul 15 15:00:47 alibaba NetworkManager: <debug> [1216126847.656746] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_03_00_2_if0').
Jul 15 15:00:52 alibaba kernel: [  157.915246] usb 6-1: new full speed USB device using ohci_hcd and address 2
Jul 15 15:00:52 alibaba kernel: [  158.094919] usb 6-1: device descriptor read/64, error -62
Jul 15 15:00:52 alibaba kernel: [  158.382348] usb 6-1: device descriptor read/64, error -62
Jul 15 15:00:52 alibaba kernel: [  158.661808] usb 6-1: new full speed USB device using ohci_hcd and address 3
Jul 15 15:00:53 alibaba kernel: [  158.841469] usb 6-1: device descriptor read/64, error -62
Jul 15 15:00:53 alibaba kernel: [  159.125627] usb 6-1: device descriptor read/64, error -62
Jul 15 15:00:53 alibaba kernel: [  159.404378] usb 6-1: new full speed USB device using ohci_hcd and address 4
Jul 15 15:00:54 alibaba kernel: [  159.811552] usb 6-1: device not accepting address 4, error -62
Jul 15 15:00:54 alibaba kernel: [  159.987244] usb 6-1: new full speed USB device using ohci_hcd and address 5
Jul 15 15:00:54 alibaba kernel: [  160.394671] usb 6-1: device not accepting address 5, error -62
Jul 15 15:01:45 alibaba kernel: [  211.415360] usb 6-1: new full speed USB device using ohci_hcd and address 6
Jul 15 15:01:45 alibaba kernel: [  211.598977] usb 6-1: device descriptor read/64, error -62
Jul 15 15:01:46 alibaba kernel: [  211.886419] usb 6-1: device descriptor read/64, error -62
Jul 15 15:01:46 alibaba kernel: [  212.165878] usb 6-1: new full speed USB device using ohci_hcd and address 7
Jul 15 15:01:46 alibaba kernel: [  212.349516] usb 6-1: device descriptor read/64, error -62
Jul 15 15:01:46 alibaba kernel: [  212.636959] usb 6-1: device descriptor read/64, error -62
Jul 15 15:01:47 alibaba kernel: [  212.916417] usb 6-1: new full speed USB device using ohci_hcd and address 8
Jul 15 15:01:47 alibaba kernel: [  213.323609] usb 6-1: device not accepting address 8, error -62
Jul 15 15:01:47 alibaba kernel: [  213.499287] usb 6-1: new full speed USB device using ohci_hcd and address 9
Jul 15 15:01:48 alibaba kernel: [  213.906476] usb 6-1: device not accepting address 9, error -62

[1]+  Stopped                 tail -f /var/log/syslog
polux@alibaba:~$ tail -f /var/log/syslog
Jul 15 15:10:34 alibaba kernel: [  739.282015] ehci_hcd 0000:03:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jul 15 15:10:34 alibaba kernel: [  739.282241] usb usb8: configuration #1 chosen from 1 choice
Jul 15 15:10:34 alibaba kernel: [  739.282299] hub 8-0:1.0: USB hub found
Jul 15 15:10:34 alibaba kernel: [  739.282314] hub 8-0:1.0: 2 ports detected
Jul 15 15:10:34 alibaba NetworkManager: <debug> [1216127434.849673] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_03_00_0_if0').
Jul 15 15:10:34 alibaba NetworkManager: <debug> [1216127434.901872] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_03_00_1').
Jul 15 15:10:34 alibaba NetworkManager: <debug> [1216127434.940917] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/pci_1033_e0_0').
Jul 15 15:10:35 alibaba NetworkManager: <debug> [1216127435.006314] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_03_00_2').
Jul 15 15:10:35 alibaba NetworkManager: <debug> [1216127435.244064] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_03_00_1_if0').
Jul 15 15:10:35 alibaba NetworkManager: <debug> [1216127435.315758] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_03_00_2_if0').
Jul 15 15:10:40 alibaba kernel: [  744.775264] usb 6-1: new full speed USB device using ohci_hcd and address 3
Jul 15 15:10:40 alibaba kernel: [  744.987167] usb 6-1: configuration #1 chosen from 1 choice
Jul 15 15:10:40 alibaba kernel: [  744.994212] scsi3 : SCSI emulation for USB Mass Storage devices
Jul 15 15:10:40 alibaba kernel: [  744.996769] usb-storage: device found at 3
Jul 15 15:10:40 alibaba kernel: [  744.996777] usb-storage: waiting for device to settle before scanning
Jul 15 15:10:40 alibaba kernel: [  745.100386] usbcore: deregistering interface driver usbserial_generic
Jul 15 15:10:40 alibaba kernel: [  745.100469] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial deregistering driver generic
Jul 15 15:10:40 alibaba kernel: [  745.100509] usbcore: deregistering interface driver usbserial
Jul 15 15:10:40 alibaba kernel: [  745.117248] usbcore: deregistering interface driver usb-storage
Jul 15 15:10:40 alibaba NetworkManager: <debug> [1216127440.489432] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_5e3_710_04331_if0_scsi_host_scsi_device_lun0_scsi_generic').
Jul 15 15:10:40 alibaba NetworkManager: <debug> [1216127440.520457] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/storage_serial_Generic_STORAGE_DEVICE_04331_0_0').
Jul 15 15:10:40 alibaba kernel: [  745.175333] usbcore: registered new interface driver usbserial
Jul 15 15:10:40 alibaba kernel: [  745.177055] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
Jul 15 15:10:40 alibaba kernel: [  745.179694] usbcore: registered new interface driver usbserial_generic
Jul 15 15:10:40 alibaba kernel: [  745.179710] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial Driver core
Jul 15 15:10:40 alibaba NetworkManager: <debug> [1216127440.548220] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2000_noserial').
Jul 15 15:10:40 alibaba NetworkManager: <debug> [1216127440.557241] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_5e3_710_04331_if0_scsi_host_scsi_device_lun0').
Jul 15 15:10:40 alibaba NetworkManager: <debug> [1216127440.561221] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_5e3_710_04331_if0_scsi_host_scsi_device_lun1').
Jul 15 15:10:40 alibaba NetworkManager: <debug> [1216127440.570323] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_5e3_710_04331_if0_scsi_host_scsi_device_lun2').
Jul 15 15:10:40 alibaba NetworkManager: <debug> [1216127440.571308] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_5e3_710_04331_if0_scsi_host_scsi_device_lun3').
Jul 15 15:10:40 alibaba NetworkManager: <debug> [1216127440.571776] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_5e3_710_04331_if0_scsi_host').
Jul 15 15:10:40 alibaba NetworkManager: <debug> [1216127440.583579] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_5e3_710_04331_if0_scsi_host_scsi_device_lun1_scsi_generic').
Jul 15 15:10:40 alibaba NetworkManager: <debug> [1216127440.621230] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/storage_serial_Generic_STORAGE_DEVICE_04331_0_1').
Jul 15 15:10:40 alibaba NetworkManager: <debug> [1216127440.652360] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_5e3_710_04331_if0_scsi_host_scsi_device_lun2_scsi_generic').
Jul 15 15:10:40 alibaba NetworkManager: <debug> [1216127440.688308] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_060E_A36A').
Jul 15 15:10:40 alibaba NetworkManager: <debug> [1216127440.705094] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/storage_serial_Generic_STORAGE_DEVICE_04331_0_2').
Jul 15 15:10:40 alibaba NetworkManager: <debug> [1216127440.731465] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_5e3_710_04331_if0_scsi_host_scsi_device_lun3_scsi_generic').
Jul 15 15:10:40 alibaba NetworkManager: <debug> [1216127440.945692] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2000_noserial_if0').
Jul 15 15:10:40 alibaba NetworkManager: <debug> [1216127440.969015] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/storage_serial_Generic_STORAGE_DEVICE_04331_0_3').
Jul 15 15:11:03 alibaba kernel: [  768.190111] usb 6-1: USB disconnect, address 3
Jul 15 15:11:03 alibaba NetworkManager: <debug> [1216127463.595058] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2000_noserial_if0').
Jul 15 15:11:03 alibaba NetworkManager: <debug> [1216127463.603672] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2000_noserial').
Jul 15 15:11:05 alibaba kernel: [  769.774622] usb 6-1: new full speed USB device using ohci_hcd and address 4
Jul 15 15:11:05 alibaba kernel: [  769.981407] usb 6-1: config 1 has an invalid interface number: 4 but max is 3
Jul 15 15:11:05 alibaba kernel: [  769.981418] usb 6-1: config 1 has no interface number 0
Jul 15 15:11:05 alibaba kernel: [  769.990595] usb 6-1: configuration #1 chosen from 1 choice
Jul 15 15:11:05 alibaba kernel: [  769.998310] usbserial_generic 6-1:1.1: generic converter detected
Jul 15 15:11:05 alibaba kernel: [  769.998666] usb 6-1: generic converter now attached to ttyUSB0
Jul 15 15:11:05 alibaba kernel: [  770.000652] usbserial_generic 6-1:1.2: generic converter detected
Jul 15 15:11:05 alibaba kernel: [  770.001004] usb 6-1: generic converter now attached to ttyUSB1
Jul 15 15:11:05 alibaba kernel: [  770.006445] usbserial_generic 6-1:1.3: generic converter detected
Jul 15 15:11:05 alibaba kernel: [  770.006804] usb 6-1: generic converter now attached to ttyUSB2
Jul 15 15:11:05 alibaba kernel: [  770.008610] usbserial_generic 6-1:1.4: generic converter detected
Jul 15 15:11:05 alibaba kernel: [  770.008967] usb 6-1: generic converter now attached to ttyUSB3
Jul 15 15:11:05 alibaba kernel: [  770.038891] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for airprime
Jul 15 15:11:05 alibaba kernel: [  770.038959] usbcore: registered new interface driver airprime
Jul 15 15:11:05 alibaba NetworkManager: <debug> [1216127465.483873] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2_noserial').
Jul 15 15:11:05 alibaba NetworkManager: <debug> [1216127465.944497] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2_noserial_if2').
Jul 15 15:11:06 alibaba NetworkManager: <debug> [1216127466.380536] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2_noserial_if3').
Jul 15 15:11:06 alibaba NetworkManager: <debug> [1216127466.388975] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2_noserial_if1').
Jul 15 15:11:06 alibaba NetworkManager: <debug> [1216127466.413146] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2_noserial_if4').
Jul 15 15:11:06 alibaba NetworkManager: <debug> [1216127466.468427] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2_noserial_if1_serial_usb_0').
Jul 15 15:11:06 alibaba NetworkManager: <debug> [1216127466.483221] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2_noserial_if2_serial_usb_1').
Jul 15 15:11:06 alibaba NetworkManager: <debug> [1216127466.497374] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2_noserial_if3_serial_usb_2').
Jul 15 15:11:06 alibaba NetworkManager: <debug> [1216127466.510741] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_19d2_2_noserial_if4_serial_usb_3').
Jul 15 15:11:09 alibaba kernel: [  774.159574] PPP generic driver version 2.4.2
Jul 15 15:11:09 alibaba kernel: [  774.261393] NET: Registered protocol family 10
Jul 15 15:11:09 alibaba kernel: [  774.263196] lo: Disabled Privacy Extensions
Jul 15 15:11:09 alibaba kernel: [  774.265133] ADDRCONF(NETDEV_UP): eth0: link is not ready
Jul 15 15:11:09 alibaba pppd[8367]: pppd 2.4.4 started by polux, uid 1000
Jul 15 15:11:09 alibaba pppd[8367]: Using interface ppp0
Jul 15 15:11:09 alibaba pppd[8367]: Connect: ppp0 <--> /dev/ttyUSB3
Jul 15 15:11:39 alibaba pppd[8367]: LCP: timeout sending Config-Requests
Jul 15 15:11:39 alibaba pppd[8367]: Connection terminated.
Jul 15 15:11:39 alibaba pppd[8367]: Modem hangup
Jul 15 15:11:39 alibaba pppd[8367]: Exit.
Come si puo vedere la prima volta che inserisco la scheda succede di tutto e se provo wvdial mi dice che non esiste /dev/ttyUSB3...con "control+z" fermo tail, stacando, riatacando la scheda, riavviando tail ecco che vediamo la scheda riconosciuta (correttamente?) e si abilitanon sia dev/ttyUSB3 che dev/ttyUSB1 e dev/ttyUSB2

Ci sono quasi...!!! Ci sono qualche idee ???

Provo postare questo anche sul topics di roby78 "[RISOLTO] Onda MT505UP - TIM Funziona..(forse) (!!!)"
giosimar
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1249
Iscrizione: martedì 7 novembre 2006, 21:30

Re: [Driver] Driver onda ET505UP pcmcia

Messaggio da giosimar »

uhm, anche a me non funziona "da subito", ma rimettendo la scheda.

di fatto, prima avvio ubuntu e poi inserisco la scheda.

mi sono perso il tuo wvdial.conf
http://xoomer.alice.it/giosimar/ubuntulinux.swf
Prima di dirmi cosa è giusto e cose è sbagliato, paga l'IRPEF.
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: Google [Bot] e 4 ospiti