Asus TV-7131/FM Analogue & Hybrid TV Tuner Driver

[klave]

salve a tutti forse dal titolo gia si capisce, io ho un packard bell, sono una new entry del mondo linux, utilizzo ubuntu (la nuova versione beta la 8.4) sono riuscito ad installare tutto quello di cui avevo bisogno, skeda video, skeda audio, stampante, scanner, ecc ecc. ho una skeda tv che è anke skeda di acquisizione... e vorrei poterla utilizzare anke con ubuntu... xo nn l'ho configurata e non saprei proprio da dove incominciare... ripeto nn so veramente nulla di UBUNTU... anke se studio informatica da 7 anni.... aspetto una vostra risposta sperando ke questa skeda sia supportata da questo sistema operativo...
aiutatemi please
vi posto anke il modello del mio pc semmai ne aveste bisogno
http://support.packardbell.com/it/item/ ... 315&g=1400

vi ringrazio x l'attenzione aspetto una vostra risposta

[blackcat]

per prima cosa apri un terminale e dammi il risultato di questi 3 comandi

Codice: Seleziona tutto

dmesg | grep saa
dmesg | grep tuner
dmesg | grep DVB
lspci

[klave]

amministratore@ubuntu:~$ dmesg | grep saa
[  32.981283] saa7130/34: v4l2 driver version 0.2.14 loaded
[  32.981370] saa7133[0]: found at 0000:00:09.0, rev: 209, irq: 22, latency: 32, mmio: 0xdfffe000
[  32.981376] saa7133[0]: subsystem: 1043:4857, board: ASUSTeK P7131 Dual [card=78,autodetected]
[  32.981385] saa7133[0]: board init: gpio is 0
[  32.981445] input: saa7134 IR (ASUSTeK P7131 Dual) as /devices/pci0000:00/0000:00:09.0/input/input6
[  33.177264] saa7133[0]: i2c eeprom 00: 43 10 57 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[  33.177274] saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff
[  33.177282] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 b6 ff ff ff ff
[  33.177290] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  33.177298] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 00 ff ff ff ff ff ff
[  33.177306] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  33.177313] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  33.177321] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  33.661063] tuner 1-004b: chip found @ 0x96 (saa7133[0])
[  33.972767] saa7133[0]: registered device video0 [v4l2]
[  33.972786] saa7133[0]: registered device vbi0
[  33.972803] saa7133[0]: registered device radio0
[  34.020561] saa7134 ALSA driver for DMA sound loaded
[  34.020592] saa7133[0]/alsa: saa7133[0] at 0xdfffe000 irq 22 registered as card -2
[  34.158304] DVB: registering new adapter (saa7133[0])

amministratore@ubuntu:~$ dmesg | grep tuner
[  33.661063] tuner 1-004b: chip found @ 0x96 (saa7133[0])
[  33.709049] tda8290 1-004b: setting tuner address to 61
[  33.819113] tuner 1-004b: type set to tda8290+75a
[  33.866011] tda8290 1-004b: setting tuner address to 61
[  33.969949] tuner 1-004b: type set to tda8290+75a

amministratore@ubuntu:~$ dmesg | grep DVB
[  34.158304] DVB: registering new adapter (saa7133[0])
[  34.158308] DVB: registering frontend 0 (Philips TDA10046H DVB-T)...

amministratore@ubuntu:~$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.5 PIC: VIA Technologies, Inc. P4M890 I/O APIC Interrupt Controller
00:00.6 Host bridge: VIA Technologies, Inc. P4M890 Security Device
00:00.7 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. [K8T890 North / VT8237 South] PCI Bridge
00:02.0 PCI bridge: VIA Technologies, Inc. P4M890 PCI to PCI Bridge Controller
00:03.0 PCI bridge: VIA Technologies, Inc. P4M890 PCI to PCI Bridge Controller
00:08.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev c0)
00:09.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
00:0f.0 IDE interface: VIA Technologies, Inc. VT8237A SATA 2-Port Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237A PCI to ISA Bridge
00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c)
00:13.0 PCI bridge: VIA Technologies, Inc. VT8237A Host Bridge
02:00.0 VGA compatible controller: nVidia Corporation G72 [GeForce 7300 SE] (rev a1)
04:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio Controller (rev 10)

[blackcat]

la scheda è già configurata in tutto e per tutto in maniera automatica

per ascoltare la radio fm puoi usare gnome-radio o rhythmbox (se usi gnome) o kradio (per kde)
per il digitale terrestre me-tv o kaffeine
per la tv analogica xawtv, tvtime o kdetv

EDIT: dimenticavo, per il digiate terrestre non c'è nessun problema sull'audio, per la radio e la tv analogica prima di avviare i programmi devi dare questo comando per poter ascoltare qualcosa:

Codice: Seleziona tutto

arecord -D hw:1,0 -r 32000 -c 2 -f S16_LE | aplay

se con questo comando non senti niente devi cercare di modificare il valore di hw: per impostarlo sulla scheda tv

[klave]

grazie mille non so cosa avrei fatto se nn avessi avuto te grazie

[klave]

ho fatto come hai detto tu c'è solo un problema non funge l'audio... (xawtv) mentre tvtime non mi apre proprio il programma (cioe ci clicco esce una finestra x meno d un secondo nera e si rikiude) ke faccio?

[Ada90]

salve, anke io ho un packard bell con la scheda x vedere la tv, questo è il mio risultato a quei comandi....li ho confrontati e non sono del tutto uguali...cosa dovrei fare x poter vedere anke io la tv?
grazie a tt in anticipo

ada@Mercedes:~$ dmesg | grep saa
[  45.347886] saa7130/34: v4l2 driver version 0.2.14 loaded
[  45.347996] saa7133[0]: found at 0000:02:01.0, rev: 208, irq: 17, latency: 64, mmio: 0xfddfe000
[  45.348008] saa7133[0]: subsystem: 1043:4857, board: ASUSTeK P7131 Dual [card=78,autodetected]
[  45.348022] saa7133[0]: board init: gpio is 0
[  45.348133] input: saa7134 IR (ASUSTeK P7131 Dual) as /devices/pci0000:00/0000:00:14.4/0000:02:01.0/input/input6
[  45.538048] saa7133[0]: i2c eeprom 00: 43 10 57 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[  45.538068] saa7133[0]: i2c eeprom 10: 00 01 20 00 ff 20 ff ff ff ff ff ff ff ff ff ff
[  45.538085] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 cb ff ff ff ff
[  45.538102] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  45.538120] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 00 ff ff ff ff ff ff
[  45.538136] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  45.538152] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  45.538170] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  45.706757] tuner 1-004b: chip found @ 0x96 (saa7133[0])
[  46.011976] saa7133[0]: registered device video1 [v4l2]
[  46.012016] saa7133[0]: registered device vbi0
[  46.012048] saa7133[0]: registered device radio0
[  46.096192] saa7134 ALSA driver for DMA sound loaded
[  46.096243] saa7133[0]/alsa: saa7133[0] at 0xfddfe000 irq 17 registered as card -2
[  46.193698] DVB: registering new adapter (saa7133[0])
ada@Mercedes:~$ dmesg | grep tuner
[  45.706757] tuner 1-004b: chip found @ 0x96 (saa7133[0])
[  45.754697] tda8290 1-004b: setting tuner address to 61
[  45.857503] tuner 1-004b: type set to tda8290+75a
[  45.905401] tda8290 1-004b: setting tuner address to 61
[  46.009257] tuner 1-004b: type set to tda8290+75a
ada@Mercedes:~$ dmesg | grep DVB
[  46.193698] DVB: registering new adapter (saa7133[0])
[  46.193708] DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
ada@Mercedes:~$ lspci
00:00.0 Host bridge: ATI Technologies Inc Radeon Xpress 200 Host Bridge (rev 01)
00:02.0 PCI bridge: ATI Technologies Inc RS480 PCI-X Root Port
00:11.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller (rev 80)
00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller (rev 80)
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80)
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 82)
00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller (rev 80)
00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller (rev 01)
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80)
01:00.0 VGA compatible controller: ATI Technologies Inc RV515 [Radeon X1300]
01:00.1 Display controller: ATI Technologies Inc RV515 [Radeon X1300] (Secondary)
02:00.0 Modem: Motorola SM56 Data Fax Modem (rev 04)
02:01.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d0)
02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:06.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
ada@Mercedes:~$