bluetooth

[criceto45]

premessa ho messo lo stesso post anche in kubuntu visto che uso entrambi le distribuzioni e mi sarebbe sufficiente che il cell funzionasse su una non trovando risposte scusate

ciao a tutti e grazie dell'aiuto che mi darete
dunque ho un notebook hp pavilion dv 8000 con bluetooth integrato e ho acquistato un cellulare nokia e65 eseries.non riesco a configurare il bluetooth nonostante abbia seguito il wiki alla lettera e varie ricerche su google.ho solo capito che non e' semplice.il problema e' che il cell non vede il pc e viceversa.vorrei specificare che mi servirebbe solo per inviare e ricevere file dal pc e viceversa senza altre funzioni tipo conessione ecc . aspetto ansioso grazie Roll Eyes Huh?

[Janvitus]

Da terminale, lscpi e lsusb.

[criceto45]

eccole

Codice: Seleziona tutto

giuseppe@giuseppe-laptop:~$ lscpi
bash: lscpi: command not found
giuseppe@giuseppe-laptop:~$

Codice: Seleziona tutto

giuseppe@giuseppe-laptop:~$ lsusb
Bus 003 Device 003: ID 0471:0833 Philips 
Bus 003 Device 001: ID 0000:0000  
Bus 002 Device 002: ID 041e:4052 Creative Technology, Ltd 
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 003: ID 093a:2500 Pixart Imaging, Inc. USB Optical Mouse
Bus 001 Device 001: ID 0000:0000  

non lo vede propio,ho letto su un post che avendo un systema symbiam.il pc nasconda il bluetooth.mi sembrano follie pero'.......

[criceto45]

nessuno possiede un cellulare simile o conosce altri metodi di trasmissione da pc a cell o viceversa tipo infrarossi.si puo' usare solo con windows,spero di no >:( >:(

[criceto45]

dunque poseggo 3 cellulari un nokia come detto un samsung sgh 500 e un wp-s1 della 3g con skype.possibile che il bluetooth non funzioni con nessuno,con la precedente versione di ubuntu il samsung funzionava benissimo.ora sto usando hardy heron grazie per le informazioni

[Janvitus]

Scusa ma il comando è lspci, scritto male.

[criceto45]

Codice: Seleziona tutto

giuseppe@giuseppe-laptop:~$ lspci
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
00:14.6 Modem: ATI Technologies Inc SB400 AC'97 Modem Controller (rev 02)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon XPRESS 200M 5955 (PCIE)
06:02.0 Network controller: Broadcom Corporation BCM4311 [AirForce 54g] 802.11a/b/g PCI Express Transceiver (rev 02)
06:04.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
06:04.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
06:04.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
06:04.4 SD Host controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
06:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
giuseppe@giuseppe-laptop:~$ 

eccolo aggiungo

Codice: Seleziona tutto

giuseppe@giuseppe-laptop:~$ lsusb
Bus 003 Device 001: ID 0000:0000  
Bus 002 Device 002: ID 041e:4052 Creative Technology, Ltd 
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 003: ID 093a:2500 Pixart Imaging, Inc. USB Optical Mouse
Bus 001 Device 001: ID 0000:0000  
giuseppe@giuseppe-laptop:~$ 

[criceto45]

ora ho formatato chi mi assiste nella configurazione grazie 

[Tausinux]

formattato cosa?

[criceto45]

scusa ma e' una settimana che provo,a parte che sembra non andare ancora.comuque io sono gia' operativo

[toastedtech]

Ciao, per configurare il bluetooth, ti consiglio questa guida, da provare....
http://toastedtech.wordpress.com/2007/1 ... -su-linux/
L'ho scritto  io, prova un pò...e naturalmente fammi sapere...ciao

[criceto45]

io non ho una periferica da installare il bluetooth e' integrato,comunque seguendo la tua guida ecco i risultati

Codice: Seleziona tutto

giuseppe@giuseppe-laptop:~$ sudo apt-get install bluez-utils bluez-firmware bluez-hcdidump
[sudo] password for giuseppe: 
Lettura della lista dei pacchetti in corso... Fatto
Generazione dell'albero delle dipendenze in corso       
Lettura delle informazioni di stato... Fatto     
bluez-utils è già alla versione più recente.
Il pacchetto bluez-firmware non ha versioni disponibili, ma è nominato da un altro
pacchetto. Questo significa che il pacchetto manca, è diventato obsoleto
o è disponibile solo all'interno di un'altra sorgente
E: Il pacchetto bluez-firmware non ha candidati da installare
giuseppe@giuseppe-laptop:~$  hciconfig
giuseppe@giuseppe-laptop:~$ 
giuseppe@giuseppe-laptop:~$ 

[toastedtech]

Ciao
Ho effettuato una rcerca e sembra che il problema sia un bug di ubuntu 8.04
Non ti resta che aspettare gli aggiornamenti.
Ciao

[criceto45]

sospettavo,infatti in molti ora con hardy sono messi come me e su google non si trova niente.aspettero eventi grazie 

[saxtro]

accendi il portatile con il bluetooth spento
dopo che ubuntu è partito ed ha caricato tutto lanci il comando

Codice: Seleziona tutto

dmesg

e posti l' ultima 30ina di righe

[criceto45]

Codice: Seleziona tutto

[   17.744840] eth0: RealTek RTL8139 at 0xa000, 00:0f:b0:c0:e3:74, IRQ 22
[   17.744842] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[   17.748151] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   17.767436] hda: max request size: 128KiB
[   17.767443] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63
[   17.771237] hda: cache flushes supported
[   17.771270]  hda: hda1 hda2 < hda5 >
[   17.843381] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
[   17.843389] Uniform CD-ROM driver Revision: 3.20
[   18.114409] Attempting manual resume
[   18.114414] swsusp: Resume From Partition 3:5
[   18.114416] PM: Checking swsusp image.
[   18.114593] PM: Resume from disk failed.
[   18.165572] kjournald starting.  Commit interval 5 seconds
[   18.165587] EXT3-fs: mounted filesystem with ordered data mode.
[   19.012218] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[613f0200400b407a]
[   22.321000] usb-storage: device scan complete
[   22.322111] scsi 0:0:0:0: CD-ROM            PHILIPS  SPD3300L         H5S2 PQ: 0 ANSI: 0
[   30.944484] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   30.968525] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   30.996500] input: PC Speaker as /devices/platform/pcspkr/input/input3
[   31.036383] Linux agpgart interface v0.102
[   31.252224] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[   31.508063] input: Power Button (FF) as /devices/virtual/input/input4
[   31.523893] ACPI: Power Button (FF) [PWRF]
[   31.524006] input: Sleep Button (FF) as /devices/virtual/input/input5
[   31.536961] ACPI: Sleep Button (FF) [SLPF]
[   31.537061] input: Lid Switch as /devices/virtual/input/input6
[   31.537130] ACPI: Lid Switch [LID]
[   31.537184] input: Power Button (CM) as /devices/virtual/input/input7
[   31.547854] ACPI: Power Button (CM) [PWRB]
[   31.840357] Yenta: CardBus bridge found at 0000:06:04.0 [103c:309b]
[   31.840384] Yenta: Enabling burst memory read transactions
[   31.840390] Yenta: Using INTVAL to route CSC interrupts to PCI
[   31.840393] Yenta: Routing CardBus interrupts to ISA
[   31.840399] Yenta TI: socket 0000:06:04.0, mfunc 0x00a61b22, devctl 0x64
[   31.908606] ACPI: WMI-Acer: Mapper loaded
[   32.072100] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
[   32.072106] Socket status: 30000006
[   32.072110] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[   32.072113] cs: IO port probe 0xa000-0xafff: clean.
[   32.072323] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
[   32.151597] ACPI: PCI Interrupt 0000:06:04.3[B] -> GSI 23 (level, low) -> IRQ 21
[   32.216194] sdhci: Secure Digital Host Controller Interface driver
[   32.216199] sdhci: Copyright(c) Pierre Ossman
[   32.216250] sdhci: SDHCI controller found at 0000:06:04.4 [104c:8034] (rev 0)
[   32.216275] ACPI: PCI Interrupt 0000:06:04.4[A] -> GSI 20 (level, low) -> IRQ 16
[   32.216298] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[   32.216344] mmc0: SDHCI at 0xc020a000 irq 16 DMA
[   32.216356] sdhci:slot1: Will use DMA mode even though HW doesn't fully claim to support it.
[   32.216387] mmc1: SDHCI at 0xc0209c00 irq 16 DMA
[   32.216400] sdhci:slot2: Will use DMA mode even though HW doesn't fully claim to support it.
[   32.216429] mmc2: SDHCI at 0xc0209800 irq 16 DMA
[   32.474707] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   32.505551] [fglrx] Maximum main memory to use for locked dma buffers: 1170 MBytes.
[   32.505586] [fglrx] ASYNCIO init succeed!
[   32.505756] [fglrx] PAT is enabled successfully!
[   32.529635] [fglrx] module loaded - fglrx 8.47.3 [Mar 29 2008] on minor 0
[   33.219413] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
[   33.282347] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[   33.306780] ACPI: AC Adapter [ACAD] (on-line)
[   33.829679] ACPI: Battery Slot [BAT1] (battery absent)
[   34.126524] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[   34.165419] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
[   34.227474] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0f/LNXVIDEO:00/input/input9
[   34.253324] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   34.277220] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/ac97/ac97_codec.c:2160: MC'97 0 converters and GPIO not ready (0x1)
[   34.405152] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17
[   34.894067] Linux video capture interface: v2.00
[   34.926204] Driver 'sr' needs updating - please use bus_type methods
[   34.936023] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[   34.936081] sr 0:0:0:0: Attached scsi CD-ROM sr0
[   35.001204] NET: Registered protocol family 10
[   35.001396] lo: Disabled Privacy Extensions
[   35.120621] /home/giuseppe/webcam-driver/ov51x-jpeg-core.c: USB OV519 video device found
[   35.137960] b43-phy0: Broadcom 4318 WLAN found
[   35.159036] sr 0:0:0:0: Attached scsi generic sg0 type 5
[   35.205196] phy0: Selected rate control algorithm 'simple'
[   35.539040] /home/giuseppe/webcam-driver/ov51x-jpeg-core.c: Sensor is an OV7670
[   36.630027] cs: IO port probe 0x100-0x3af: clean.
[   36.632687] cs: IO port probe 0x3e0-0x4ff: clean.
[   36.633764] cs: IO port probe 0x820-0x8ff: clean.
[   36.634619] cs: IO port probe 0xc00-0xcf7: clean.
[   36.635535] cs: IO port probe 0xa00-0xaff: clean.
[   36.803068] /home/giuseppe/webcam-driver/ov51x-jpeg-core.c: Device at usb-0000:00:13.1-3 registered to minor 0
[   36.803090] usbcore: registered new interface driver ov51x
[   36.803094] /home/giuseppe/webcam-driver/ov51x-jpeg-core.c: 1.5.7 : ov51x USB Camera Driver
[   37.321549] lp: driver loaded but no devices found
[   37.565128] Adding 3229024k swap on /dev/hda5.  Priority:-1 extents:1 across:3229024k
[   38.120246] EXT3 FS on hda1, internal journal
[   38.269040] device-mapper: uevent: version 1.0.3
[   38.269068] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[   39.853652] ip_tables: (C) 2000-2006 Netfilter Core Team
[   40.242794] PPP generic driver version 2.4.2
[   40.263032] NET: Registered protocol family 17
[   40.372242] NET: Registered protocol family 24
[   40.842995] No dock devices found.
[   41.161235] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology ML-32 processors (1 cpu cores) (version 2.20.00)
[   41.161272] powernow-k8:    0 : fid 0xa (1800 MHz), vid 0x4
[   41.161274] powernow-k8:    1 : fid 0x8 (1600 MHz), vid 0x6
[   41.161277] powernow-k8:    2 : fid 0x0 (800 MHz), vid 0x16
[   41.161314] powernow-k8: ph2 null fid transition 0xa
[   43.762938] apm: BIOS not found.
[   44.593136] ppdev: user-space parallel port driver
[   45.022695] eth0: no IPv6 routers present
[   45.023910] audit(1211978479.888:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5398 profile="/usr/sbin/cupsd" namespace="default"
[   45.377518] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 17
[   47.032795] [fglrx] GART Table is not in FRAME_BUFFER range 
[   47.032807] [fglrx] Reserve Block - 0 offset =  0X0 length = 0X40000
[   47.032810] [fglrx] Reserve Block - 1 offset =  0X7ff5000 length = 0Xb000
[   47.255563] [fglrx] interrupt source 20008000 successfully enabled
[   47.255570] [fglrx] enable ID = 0x00000004
[   47.255580] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
[   53.497997] Marking TSC unstable due to: cpufreq changes.
[   53.502342] Time: acpi_pm clocksource has been installed.
[   55.219921] input: b43-phy0 as /devices/virtual/input/input10
[   55.344236] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
[   55.344245] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4).
[   55.448716] Bluetooth: Core ver 2.11
[   55.449437] NET: Registered protocol family 31
[   55.449442] Bluetooth: HCI device and connection manager initialized
[   55.449446] Bluetooth: HCI socket layer initialized
[   55.518216] Bluetooth: L2CAP ver 2.9
[   55.518221] Bluetooth: L2CAP socket layer initialized
[   55.552656] Bluetooth: RFCOMM socket layer initialized
[   55.553038] Bluetooth: RFCOMM TTY layer initialized
[   55.553042] Bluetooth: RFCOMM ver 1.8
[  114.595640] Clocksource tsc unstable (delta = -91116073 ns)
[  115.340375] input: b43-phy0 as /devices/virtual/input/input11
[  115.403320] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
[  115.403334] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4).
[  136.486095] input: b43-phy0 as /devices/virtual/input/input12
[  136.547787] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
[  136.547800] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4).
[   73.734068] input: b43-phy0 as /devices/virtual/input/input13
[   73.820147] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
[   73.820156] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4).
[  102.053497] input: b43-phy0 as /devices/virtual/input/input14
[  102.122393] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
[  102.122402] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4).
giuseppe@giuseppe-laptop:~$ 

[saxtro]

preso dà http://linuxwireless.org/en/users/Drive ... fw-b43-old

tratto da fonte
...
You are using the b43 driver from linux-2.6.24

If you are using the b43 driver from linux-2.6.24, follow these instructions.

Use version 011 of b43-fwcutter.
Download, extract the b43-fwcutter tarball and build it:

• wget http://bu3sch.de/b43/fwcutter/b43-fwcutter-011.tar.bz2
  tar xjf b43-fwcutter-011.tar.bz2
  cd b43-fwcutter-011
  make
  cd ..

Use version 4.80.53.0 of Broadcom's proprietary driver.
Download and extract the firmware from this driver tarball:

• export FIRMWARE_INSTALL_DIR="/lib/firmware"
  wget http://downloads.openwrt.org/sources/br ... .0.tar.bz2
  tar xjf broadcom-wl-4.80.53.0.tar.bz2
  cd broadcom-wl-4.80.53.0/kmod
  sudo ../../b43-fwcutter-011/b43-fwcutter -w "$FIRMWARE_INSTALL_DIR" wl_apsta.o

Note that you must adjust the FIRMWARE_INSTALL_DIR path to your distribution. The standard place where firmware is installed to is /lib/firmware. However some distributions put firmware in a different place.
...

[criceto45]

potresti essere piu' specifico.quali dovrei installare ? e poi non sono driver per il wireless che non uso.influenza il bluetooth?nelle versioni precedenti non li ho mai installati valgono solo per hardy grazie ::)

[saxtro]

potresti essere piu' specifico.quali dovrei installare ?

la versione per il tuo kernel

e poi non sono driver per il wireless che non uso.influenza il bluetooth?

questo dovresti saperlo tu, sul mio portatile (dell latitude 630) l' interruttore del wireless abilita anche il bluetooth

nelle versioni precedenti non li ho mai installati valgono solo per hardy grazie ::)

vale per tutti quelli che usano la nuova versione del driver, nel kernel non trovi i firmware proprietari, se la licenza lo permette credo che verranno integrati in restricted modules su ubuntu

[criceto45]

io non ho nemmeno l'interuttore hp pavilion dv 8000 .comunque via cavo usb mi vede la micro sd,penso lo usero cosi' per trasferire dati,per il resto aspettero' gli aggiornamenti non sono molto pratico in queste cose.se propio mi dovesse servire tornero alla 7.10 li non avevo problemi grazie ciao