Blocco tastiera e mouse dopo login

[Guybrush]

Ciao a tutti!

E' da un bel po' di tempo che con Ubuntu 8.04 subito dopo il login si blocchino contemporaneamente mouse e tastiera. I led sulla tastiera del blocco maiuscole e blocco scorrimento cominciano a lampeggiare mentre il led del mouse rimane fisso. Non ho possibilità di fare nulla se non riavviare con il tasto di reset sul case.

Ora però la situazione comincia a stancarmi visto che lo fa piuttosto spesso.

Mi date una mano?

[- pod -]

sono entrambe usb? Hai provato se con un altro mouse o tastiera il problema si presenta?

posta il risultato di dmesg (con tastiera e mouse collegati)

[Guybrush]

Mouse USE e tastiera PS/2

Codice: Seleziona tutto

[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bfb80000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260001
[    0.000000] Kernel command line: root=UUID=67ff1278-0a7f-4036-9507-7c38638f1952 ro quiet splash
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 3211.507 MHz processor.
[   17.886419] Console: colour VGA+ 80x25
[   17.886423] console [tty0] enabled
[   17.886712] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   17.887035] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   17.909985] Memory: 1027052k/1048192k available (2177k kernel code, 20476k reserved, 1006k data, 368k init, 130688k highmem)
[   17.909992] virtual kernel memory layout:
[   17.909994]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   17.909995]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   17.909996]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   17.909996]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   17.909997]       .init : 0xc0421000 - 0xc047d000   ( 368 kB)
[   17.909998]       .data : 0xc0320434 - 0xc041bdc4   (1006 kB)
[   17.909999]       .text : 0xc0100000 - 0xc0320434   (2177 kB)
[   17.910002] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   17.910033] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   17.910116] hpet clockevent registered
[   17.989904] Calibrating delay using timer specific routine.. 6428.59 BogoMIPS (lpj=12857198)
[   17.989922] Security Framework initialized
[   17.989926] SELinux:  Disabled at boot.
[   17.989937] AppArmor: AppArmor initialized
[   17.989941] Failure registering capabilities with primary security module.
[   17.989949] Mount-cache hash table entries: 512
[   17.990053] Initializing cgroup subsys ns
[   17.990057] Initializing cgroup subsys cpuacct
[   17.990069] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e43d 00000000 00000001 00000000
[   17.990077] monitor/mwait feature present.
[   17.990079] using mwait in idle threads.
[   17.990085] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   17.990087] CPU: L2 cache: 2048K
[   17.990089] CPU: Physical Processor ID: 0
[   17.990091] CPU: Processor Core ID: 0
[   17.990093] CPU: After all inits, caps: bfebfbff 20000000 00000000 0000b180 0000e43d 00000000 00000001 00000000
[   17.990102] Compat vDSO mapped to ffffe000.
[   17.990116] Checking 'hlt' instruction... OK.
[   18.006271] SMP alternatives: switching to UP code
[   18.008013] Early unpacking initramfs... done
[   18.282401] ACPI: Core revision 20070126
[   18.282460] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   18.286622] CPU0: Intel(R) Pentium(R) D CPU 3.20GHz stepping 02
[   18.286642] SMP alternatives: switching to SMP code
[   18.287400] Booting processor 1/1 eip 3000
[   18.297728] Initializing CPU#1
[   18.376841] Calibrating delay using timer specific routine.. 6422.86 BogoMIPS (lpj=12845728)
[   18.376850] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e43d 00000000 00000001 00000000
[   18.376856] monitor/mwait feature present.
[   18.376861] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   18.376862] CPU: L2 cache: 2048K
[   18.376864] CPU: Physical Processor ID: 0
[   18.376866] CPU: Processor Core ID: 1
[   18.376867] CPU: After all inits, caps: bfebfbff 20000000 00000000 0000b180 0000e43d 00000000 00000001 00000000
[   18.377389] CPU1: Intel(R) Pentium(R) D CPU 3.20GHz stepping 02
[   18.377420] Total of 2 processors activated (12851.46 BogoMIPS).
[   18.377565] ENABLING IO-APIC IRQs
[   18.377734] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   18.524531] checking TSC synchronization [CPU#0 -> CPU#1]:
[   18.544484] Measured 16 cycles TSC warp between CPUs, turning off TSC clock.
[   18.544488] Marking TSC unstable due to: check_tsc_sync_source failed.
[   18.544507] Brought up 2 CPUs
[   18.544534] CPU0 attaching sched-domain:
[   18.544537]  domain 0: span 03
[   18.544540]   groups: 01 02
[   18.544544] CPU1 attaching sched-domain:
[   18.544546]  domain 0: span 03
[   18.544548]   groups: 02 01
[   18.544743] net_namespace: 64 bytes
[   18.544753] Booting paravirtualized kernel on bare hardware
[   18.545303] Time: 14:33:15  Date: 06/29/08
[   18.545326] NET: Registered protocol family 16
[   18.545547] EISA bus registered
[   18.545552] ACPI: bus type pci registered
[   18.545879] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4
[   18.545882] PCI: Using configuration type 1
[   18.545896] Setting up standard PCI resources
[   18.557649] ACPI: EC: Look up EC in DSDT
[   18.566649] ACPI: Interpreter enabled
[   18.566652] ACPI: (supports S0 S1 S3 S4 S5)
[   18.566670] ACPI: Using IOAPIC for interrupt routing
[   18.574564] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   18.575173] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[   18.575178] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[   18.575800] PCI: Transparent bridge - 0000:00:1e.0
[   18.575834] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   18.575980] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   18.576066] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[   18.576188] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[   18.576276] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[   18.578788] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   18.578911] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   18.579032] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[   18.579153] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[   18.579274] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   18.579395] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   18.579515] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   18.579636] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   18.579774] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  A4, should be 97 [20070126]
[   18.579783] Linux Plug and Play Support v0.97 (c) Adam Belay
[   18.579819] pnp: PnP ACPI init
[   18.579827] ACPI: bus type pnp registered
[   18.584491] pnp: PnP ACPI: found 16 devices
[   18.584494] ACPI: ACPI bus type pnp unregistered
[   18.584497] PnPBIOS: Disabled by ACPI PNP
[   18.584751] PCI: Using ACPI for IRQ routing
[   18.584754] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   18.612211] NET: Registered protocol family 8
[   18.612213] NET: Registered protocol family 20
[   18.612249] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   18.612255] hpet0: 3 64-bit timers, 14318180 Hz
[   18.613288] AppArmor: AppArmor Filesystem Enabled
[   18.616192] Time: hpet clocksource has been installed.
[   18.616208] Switched to high resolution mode on CPU 0
[   18.616307] Switched to high resolution mode on CPU 1
[   18.624183] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[   18.624193] system 00:08: ioport range 0x290-0x297 has been reserved
[   18.624199] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[   18.624201] system 00:09: ioport range 0x800-0x87f has been reserved
[   18.624203] system 00:09: ioport range 0x480-0x4bf has been reserved
[   18.624206] system 00:09: ioport range 0x900-0x91f has been reserved
[   18.624208] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[   18.624211] system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
[   18.624214] system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
[   18.624216] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[   18.624223] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
[   18.624226] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[   18.624232] system 00:0e: iomem range 0xf0000000-0xf3ffffff has been reserved
[   18.624238] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[   18.624241] system 00:0f: iomem range 0xc0000-0xdffff could not be reserved
[   18.624243] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[   18.624246] system 00:0f: iomem range 0x100000-0x3fffffff could not be reserved
[   18.624249] system 00:0f: iomem range 0x0-0x0 could not be reserved
[   18.654637] PCI: Bridge: 0000:00:01.0
[   18.654640]   IO window: e000-efff
[   18.654644]   MEM window: dc000000-dfffffff
[   18.654647]   PREFETCH window: e0000000-efffffff
[   18.654651] PCI: Bridge: 0000:00:1c.0
[   18.654654]   IO window: d000-dfff
[   18.654658]   MEM window: disabled.
[   18.654662]   PREFETCH window: disabled.
[   18.654667] PCI: Bridge: 0000:00:1c.3
[   18.654669]   IO window: c000-cfff
[   18.654674]   MEM window: dbf00000-dbffffff
[   18.654677]   PREFETCH window: disabled.
[   18.654682] PCI: Bridge: 0000:00:1e.0
[   18.654684]   IO window: b000-bfff
[   18.654689]   MEM window: disabled.
[   18.654692]   PREFETCH window: disabled.
[   18.654710] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   18.654716] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   18.654734] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[   18.654739] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   18.654758] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17
[   18.654764] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[   18.654774] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   18.654786] NET: Registered protocol family 2
[   18.692020] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   18.692293] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   18.692830] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   18.693099] TCP: Hash tables configured (established 131072 bind 65536)
[   18.693102] TCP reno registered
[   18.704059] checking if image is initramfs... it is
[   19.243792] Freeing initrd memory: 7307k freed
[   19.244655] audit: initializing netlink socket (disabled)
[   19.244668] audit(1214749995.212:1): initialized
[   19.244852] highmem bounce pool size: 64 pages
[   19.247126] VFS: Disk quotas dquot_6.5.1
[   19.247208] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   19.247339] io scheduler noop registered
[   19.247341] io scheduler anticipatory registered
[   19.247343] io scheduler deadline registered
[   19.247354] io scheduler cfq registered (default)
[   19.247458] Boot video device is 0000:04:00.0
[   19.247575] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   19.247616] assign_interrupt_mode Found MSI capability
[   19.247649] Allocate Port Service[0000:00:01.0:pcie00]
[   19.247740] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   19.247783] assign_interrupt_mode Found MSI capability
[   19.247819] Allocate Port Service[0000:00:1c.0:pcie00]
[   19.247860] Allocate Port Service[0000:00:1c.0:pcie02]
[   19.247953] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[   19.247995] assign_interrupt_mode Found MSI capability
[   19.248030] Allocate Port Service[0000:00:1c.3:pcie00]
[   19.248319] isapnp: Scanning for PnP cards...
[   19.598996] isapnp: No Plug & Play device found
[   19.633268] Real Time Clock Driver v1.12ac
[   19.633452] hpet_resources: 0xfed00000 is busy
[   19.633480] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   19.633603] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   19.634381] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   19.635272] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   19.635346] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   19.635461] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[   19.635464] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[   19.635993] serio: i8042 KBD port at 0x60,0x64 irq 1
[   19.654383] mice: PS/2 mouse device common for all mice
[   19.654520] EISA: Probing bus 0 at eisa.0
[   19.654547] Cannot allocate resource for EISA slot 8
[   19.654549] EISA: Detected 0 cards.
[   19.654551] cpuidle: using governor ladder
[   19.654553] cpuidle: using governor menu
[   19.654621] NET: Registered protocol family 1
[   19.654647] Using IPI No-Shortcut mode
[   19.654672] registered taskstats version 1
[   19.654755]   Magic number: 12:692:587
[   19.654773]   hash matches device ptyc5
[   19.654795] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   19.654797] EDD information not available.
[   19.655003] Freeing unused kernel memory: 368k freed
[   19.671395] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   20.864609] fuse init (API version 7.9)
[   20.886763] ACPI: Processor [CPU1] (supports 8 throttling states)
[   20.886868] ACPI: Processor [CPU2] (supports 8 throttling states)
[   20.886895] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   20.886909] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   21.185899] usbcore: registered new interface driver usbfs
[   21.185927] usbcore: registered new interface driver hub
[   21.185957] usbcore: registered new device driver usb
[   21.203691] r8169 Gigabit Ethernet driver 2.2LK loaded
[   21.203720] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 17
[   21.203744] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   21.204114] eth0: RTL8168b/8111b at 0xf884e000, 00:17:31:9c:69:6d, XID 30000000 IRQ 220
[   21.205019] USB Universal Host Controller Interface driver v3.0
[   21.205070] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 18
[   21.205082] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   21.205085] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   21.205284] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   21.205312] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00008000
[   21.205443] usb usb1: configuration #1 chosen from 1 choice
[   21.205470] hub 1-0:1.0: USB hub found
[   21.205478] hub 1-0:1.0: 2 ports detected
[   21.280913] SCSI subsystem initialized
[   21.292549] libata version 3.00 loaded.
[   21.308445] Floppy drive(s): fd0 is 1.44M
[   21.309383] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 19
[   21.309397] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   21.309402] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   21.309430] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   21.309458] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008400
[   21.309581] usb usb2: configuration #1 chosen from 1 choice
[   21.309606] hub 2-0:1.0: USB hub found
[   21.309613] hub 2-0:1.0: 2 ports detected
[   21.325388] FDC 0 is a post-1991 82077
[   21.412502] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[   21.412514] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   21.412518] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   21.412542] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   21.412570] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00008800
[   21.412681] usb usb3: configuration #1 chosen from 1 choice
[   21.412709] hub 3-0:1.0: USB hub found
[   21.412716] hub 3-0:1.0: 2 ports detected
[   21.516233] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 17
[   21.516244] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   21.516248] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   21.516272] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   21.516299] uhci_hcd 0000:00:1d.3: irq 17, io base 0x00009000
[   21.516417] usb usb4: configuration #1 chosen from 1 choice
[   21.516442] hub 4-0:1.0: USB hub found
[   21.516448] hub 4-0:1.0: 2 ports detected
[   21.548030] usb 1-2: new full speed USB device using uhci_hcd and address 2
[   21.619964] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 21
[   21.620009] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   21.620023] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[   21.620054] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 22
[   21.620077] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   21.620087] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[   21.621290] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 18
[   21.621301] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   21.621305] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   21.621338] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   21.625235] ehci_hcd 0000:00:1d.7: debug port 1
[   21.625241] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[   21.625248] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xdbeffc00
[   21.672689] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   21.672801] usb usb5: configuration #1 chosen from 1 choice
[   21.672829] hub 5-0:1.0: USB hub found
[   21.672835] hub 5-0:1.0: 8 ports detected
[   21.780282] ata_piix 0000:00:1f.1: version 2.12
[   21.780301] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 21
[   21.780340] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   21.780434] scsi0 : ata_piix
[   21.780483] scsi1 : ata_piix
[   21.781829] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[   21.781833] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[   22.070573] usb 1-2: device not accepting address 2, error -71
[   22.262370] ata1.00: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0L06, max UDMA/33
[   22.262396] ata1.01: ATAPI: _NEC DVD_RW ND-4571A, 1-01, max UDMA/33
[   22.433829] ata1.00: configured for UDMA/33
[   22.605390] ata1.01: configured for UDMA/33
[   22.774059] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5
[   22.775256] scsi 0:0:1:0: CD-ROM            _NEC     DVD_RW ND-4571A  1-01 PQ: 0 ANSI: 5
[   22.775321] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[   22.775341] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 22
[   22.775375] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   22.775434] scsi2 : ata_piix
[   22.775479] scsi3 : ata_piix
[   22.775515] ata3: SATA max UDMA/133 cmd 0xa800 ctl 0xa400 bmdma 0x9400 irq 22
[   22.775518] ata4: SATA max UDMA/133 cmd 0xa000 ctl 0x9800 bmdma 0x9408 irq 22
[   22.980443] ata3.00: ATA-7: MAXTOR STM3320820AS, 3.AAE, max UDMA/133
[   22.980447] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   23.043864] usb 5-7: new high speed USB device using ehci_hcd and address 4
[   23.046905] ata3.00: configured for UDMA/133
[   23.176406] usb 5-7: configuration #1 chosen from 1 choice
[   23.210633] scsi 2:0:0:0: Direct-Access     ATA      MAXTOR STM332082 3.AA PQ: 0 ANSI: 5
[   23.222865] Driver 'sd' needs updating - please use bus_type methods
[   23.224337] sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[   23.224353] sd 2:0:0:0: [sda] Write Protect is off
[   23.224356] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   23.224378] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   23.224430] sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[   23.224443] sd 2:0:0:0: [sda] Write Protect is off
[   23.224446] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   23.224467] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   23.224470]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[   23.238084] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[   23.238088] Uniform CD-ROM driver Revision: 3.20
[   23.238130] sr 0:0:0:0: Attached scsi CD-ROM sr0
[   23.242144] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[   23.242187] sr 0:0:1:0: Attached scsi CD-ROM sr1
[   23.244288]  sda1 < sda5 sda6 sda7 >
[   23.268117] sd 2:0:0:0: [sda] Attached SCSI disk
[   23.274191] sr 0:0:0:0: Attached scsi generic sg0 type 5
[   23.274211] sr 0:0:1:0: Attached scsi generic sg1 type 5
[   23.274230] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   23.418851] usb 1-2: new full speed USB device using uhci_hcd and address 4
[   23.571341] Attempting manual resume
[   23.571345] swsusp: Resume From Partition 8:7
[   23.571347] PM: Checking swsusp image.
[   23.571485] PM: Resume from disk failed.
[   23.602488] EXT3-fs: INFO: recovery required on readonly filesystem.
[   23.602492] EXT3-fs: write access will be enabled during recovery.
[   23.626757] kjournald starting.  Commit interval 5 seconds
[   23.626763] EXT3-fs: recovery complete.
[   23.629209] EXT3-fs: mounted filesystem with ordered data mode.
[   23.648777] usb 1-2: configuration #1 chosen from 1 choice
[   23.889506] usb 2-2: new low speed USB device using uhci_hcd and address 2
[   24.089014] usb 2-2: configuration #1 chosen from 1 choice
[   29.387406] ip_tables: (C) 2000-2006 Netfilter Core Team
[   29.443649] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   29.868938] Linux agpgart interface v0.102
[   29.989607] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   30.012247] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   30.101557] input: Power Button (FF) as /devices/virtual/input/input2
[   30.125138] ACPI: Power Button (FF) [PWRF]
[   30.125226] input: Power Button (CM) as /devices/virtual/input/input3
[   30.157046] ACPI: Power Button (CM) [PWRB]
[   30.775879] nvidia: module license 'NVIDIA' taints kernel.
[   31.094536] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 17
[   31.094555] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   31.146665] Linux video capture interface: v2.00
[   31.247396] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found. (PAC207)
[   31.251991] usbcore: registered new interface driver gspca
[   31.251995] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.20 registered
[   31.252512] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   31.285315] intel_rng: FWH not detected
[   31.299406] usbcore: registered new interface driver hiddev
[   31.340328] input: HID 1241:1166 as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input5
[   31.357797] input,hidraw0: USB HID v1.10 Mouse [HID 1241:1166] on usb-0000:00:1d.1-2
[   31.357814] usbcore: registered new interface driver usbhid
[   31.357818] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   31.365782] ieee80211_crypt: registered algorithm 'NULL'
[   31.435633] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   31.435638] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   31.459431] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   31.459441] PCI: Setting latency timer of device 0000:04:00.0 to 64
[   31.459558] NVRM: loading NVIDIA UNIX x86 Kernel Module  169.12  Thu Feb 14 17:53:07 PST 2008
[   31.505327] iTCO_vendor_support: vendor-support=0
[   31.535386] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[   31.535475] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
[   31.535507] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   31.699028] parport_pc 00:07: reported by Plug and Play ACPI
[   31.699138] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   31.819427] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[   31.953969] zd1211rw 5-7:1.0: eth1
[   31.953989] usbcore: registered new interface driver zd1211rw
[   32.687948] lp0: using parport0 (interrupt-driven).
[   32.751791] Adding 6056464k swap on /dev/sda7.  Priority:-1 extents:1 across:6056464k
[   33.303982] EXT3 FS on sda5, internal journal
[   34.149219] kjournald starting.  Commit interval 5 seconds
[   34.149435] EXT3 FS on sda6, internal journal
[   34.149440] EXT3-fs: mounted filesystem with ordered data mode.
[   34.740345] No dock devices found.
[   35.725230] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   35.725236] apm: disabled - APM is not SMP safe.
[   35.822468] ppdev: user-space parallel port driver
[   35.970078] audit(1214750012.383:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5149 profile="/usr/sbin/cupsd" namespace="default"
[   37.250096] Bluetooth: Core ver 2.11
[   37.250394] NET: Registered protocol family 31
[   37.250398] Bluetooth: HCI device and connection manager initialized
[   37.250401] Bluetooth: HCI socket layer initialized
[   37.269679] Bluetooth: L2CAP ver 2.9
[   37.269685] Bluetooth: L2CAP socket layer initialized
[   37.310371] zd1211rw 5-7:1.0: firmware version 4605
[   37.321813] Bluetooth: RFCOMM socket layer initialized
[   37.321824] Bluetooth: RFCOMM TTY layer initialized
[   37.321826] Bluetooth: RFCOMM ver 1.8
[   37.350267] zd1211rw 5-7:1.0: zd1211 chip 0ace:1211 v4330 high 00-30-95 RF2959_RF pa0 -----
[   37.392987] r8169: eth0: link down
[   56.971777] NET: Registered protocol family 10
[   56.972140] lo: Disabled Privacy Extensions
[   56.972762] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   56.973082] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   66.459392] NET: Registered protocol family 17
[   67.101092] SoftMAC: Open Authentication completed with 00:14:85:21:7e:c5
[   67.122409] SoftMAC: Open Authentication completed with 00:14:85:21:7e:c5
[   67.135163] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   68.733430] ieee80211_crypt: registered algorithm 'TKIP'
[   85.774685] eth1: no IPv6 routers present
[   90.279610] Inbound IN=eth1 OUT= MAC= SRC=192.168.2.21 DST=239.255.255.250 LEN=165 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=UDP SPT=1901 DPT=1900 LEN=145