Pagina 1 di 1

ubuntu 8.04 funziona tutto ma boot molto lento

Inviato: domenica 20 luglio 2008, 1:30
da lupetto1974
ciao è un pò di giorni che mi rode x la testa questa domanda...
ma il boot di ubuntu sul mio notebook  è ok??
mi spiego meglio il boot dal momento che appare la scritta con il logo ubuntu è + di un minuto, circa 1 e mezzo fino al login. poi dopo il login passano altri 40 sec buoni x avere il pc usabile, cioè prima che carica xbene il desktop. che mi dite, anche a voi i tempi di boot sono questi??
come faccio a vedere se ci sono degli errori al boot? e poi di seguito come li risolvo (beh magari questo dopo  ;D)

ciao e grazie come sempre dell'aiuto  (good)
quasi dimenticavo....il mio notebook è
acer 5512 intel centrino 1,76 grafica ati x700 harddisk 80 gb

Re: ubuntu 8.04 funziona tutto ma boot molto lento

Inviato: domenica 20 luglio 2008, 2:42
da rxvt
Se ci sta tanto come dici, magari è un problema di caricamento dei supporti per l'hw da parte del kernel, di conseguenza sarebbe utile che postassi l'output del comando
dmesg
lspci

Re: ubuntu 8.04 funziona tutto ma boot molto lento

Inviato: domenica 20 luglio 2008, 2:51
da pepeyomat
mi aggiongo al topic perchè mi sa che ho problemi simili!! :-\
ciao

Re: ubuntu 8.04 funziona tutto ma boot molto lento

Inviato: domenica 20 luglio 2008, 11:52
da lupetto1974
ciao

ecco il risultato dei tuoi comandi  :o

Codice: Seleziona tutto

[  134.799050]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[  134.799053]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  134.799061] ata1.01: status: { DRDY ERR }
[   62.488722] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[   62.488729] ata1.01: BMDMA stat 0x25
[   62.488738] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[   62.488739]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[   62.488741]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[   62.488745] ata1.01: status: { DRDY ERR }
[   62.489251] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[   62.490134] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[   62.490143] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[   62.490145]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[   62.490146]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[   62.490150] ata1.01: status: { DRDY ERR }
[  137.140761] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  137.140772] ata1.01: BMDMA stat 0x25
[  137.140789] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[  137.140793]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[  137.140796]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  137.140804] ata1.01: status: { DRDY ERR }
[  137.142326] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[  137.142906] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  137.142925] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[  137.142928]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[  137.142932]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  137.142939] ata1.01: status: { DRDY ERR }
[  137.554542] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  137.554553] ata1.01: BMDMA stat 0x25
[  137.554570] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[  137.554574]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[  137.554577]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  137.554585] ata1.01: status: { DRDY ERR }
[  137.556184] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[  137.556780] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  137.556799] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[  137.556803]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[  137.556806]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  137.556813] ata1.01: status: { DRDY ERR }
[  137.932634] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  137.932645] ata1.01: BMDMA stat 0x25
[  137.932662] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[  137.932666]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[  137.932669]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  137.932677] ata1.01: status: { DRDY ERR }
[  137.934258] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[  137.939487] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  137.939508] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[  137.939512]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[  137.939515]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  137.939523] ata1.01: status: { DRDY ERR }
[  138.054304] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  138.054315] ata1.01: BMDMA stat 0x25
[  138.054332] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[  138.054336]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[  138.054339]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  138.054347] ata1.01: status: { DRDY ERR }
[  138.055887] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[  138.056459] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  138.056478] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[  138.056482]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[  138.056485]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  138.056492] ata1.01: status: { DRDY ERR }
[  138.218923] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  138.218934] ata1.01: BMDMA stat 0x25
[  138.218952] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[  138.218955]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[  138.218959]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  138.218966] ata1.01: status: { DRDY ERR }
[  138.220043] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[  138.221069] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  138.221088] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[  138.221092]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[  138.221095]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  138.221102] ata1.01: status: { DRDY ERR }
[  138.346197] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  138.346208] ata1.01: BMDMA stat 0x25
[  138.346225] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[  138.346229]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[  138.346232]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  138.346240] ata1.01: status: { DRDY ERR }
[  138.347770] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[  138.348393] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  138.348412] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[  138.348415]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[  138.348419]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  138.348426] ata1.01: status: { DRDY ERR }
[  138.449054] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  138.449064] ata1.01: BMDMA stat 0x25
[  138.449082] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[  138.449085]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[  138.449089]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  138.449096] ata1.01: status: { DRDY ERR }
[  138.450624] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[  138.451320] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  138.451339] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[  138.451343]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[  138.451346]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  138.451354] ata1.01: status: { DRDY ERR }
[  138.557390] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  138.557401] ata1.01: BMDMA stat 0x25
[  138.557418] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[  138.557422]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[  138.557425]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  138.557433] ata1.01: status: { DRDY ERR }
[  138.558966] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[  138.559575] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  138.559594] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[  138.559598]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[  138.559601]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  138.559609] ata1.01: status: { DRDY ERR }
[  138.671518] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  138.671529] ata1.01: BMDMA stat 0x25
[  138.671546] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[  138.671549]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[  138.671553]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  138.671561] ata1.01: status: { DRDY ERR }
[  138.673507] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[  138.674139] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  138.674159] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[  138.674162]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[  138.674166]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  138.674173] ata1.01: status: { DRDY ERR }
[  138.845093] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  138.845104] ata1.01: BMDMA stat 0x25
[  138.845121] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[  138.845125]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[  138.845128]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  138.845136] ata1.01: status: { DRDY ERR }
[  138.847177] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[  138.850918] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  138.850940] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[  138.850943]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[  138.850947]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  138.850954] ata1.01: status: { DRDY ERR }
[  139.409750] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  139.409761] ata1.01: BMDMA stat 0x25
[  139.409779] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[  139.409783]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[  139.409786]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  139.409794] ata1.01: status: { DRDY ERR }
[  139.411445] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[  139.412141] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  139.412161] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[  139.412164]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[  139.412168]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  139.412175] ata1.01: status: { DRDY ERR }
[  139.513688] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  139.513698] ata1.01: BMDMA stat 0x25
[  139.513716] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[  139.513719]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[  139.513723]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  139.513730] ata1.01: status: { DRDY ERR }
[  139.515302] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[  139.518496] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  139.518517] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[  139.518521]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[  139.518524]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  139.518531] ata1.01: status: { DRDY ERR }
[  139.617018] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  139.617029] ata1.01: BMDMA stat 0x25
[  139.617046] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[  139.617050]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[  139.617053]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  139.617061] ata1.01: status: { DRDY ERR }
[  139.617153] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[  139.623775] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  139.623798] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[  139.623801]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[  139.623805]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  139.623812] ata1.01: status: { DRDY ERR }
[  139.753519] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  139.753530] ata1.01: BMDMA stat 0x25
[  139.753547] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[  139.753551]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[  139.753554]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  139.753562] ata1.01: status: { DRDY ERR }
[  139.754695] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[  139.760862] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  139.760884] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[  139.760888]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[  139.760891]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  139.760899] ata1.01: status: { DRDY ERR }
[  139.904427] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  139.904438] ata1.01: BMDMA stat 0x25
[  139.904455] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[  139.904459]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[  139.904462]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  139.904470] ata1.01: status: { DRDY ERR }
[  139.905590] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[  139.906894] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  139.906914] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[  139.906917]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[  139.906921]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  139.906933] ata1.01: status: { DRDY ERR }
[  140.109081] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.109092] ata1.01: BMDMA stat 0x25
[  140.109109] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[  140.109113]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[  140.109116]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  140.109124] ata1.01: status: { DRDY ERR }
[  140.110735] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[  140.113457] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.113479] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[  140.113482]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[  140.113486]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  140.113493] ata1.01: status: { DRDY ERR }
[  140.383996] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.384007] ata1.01: BMDMA stat 0x25
[  140.384025] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[  140.384028]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[  140.384032]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  140.384039] ata1.01: status: { DRDY ERR }
[  140.385227] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[  140.388572] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.388593] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[  140.388597]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[  140.388600]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  140.388608] ata1.01: status: { DRDY ERR }
[   64.935570] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[   64.935577] ata1.01: BMDMA stat 0x25
[   64.935586] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[   64.935587]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[   64.935589]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[   64.935593] ata1.01: status: { DRDY ERR }
[   64.936357] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[   64.937149] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[   64.937158] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[   64.937159]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[   64.937161]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[   64.937164] ata1.01: status: { DRDY ERR }
[  141.067302] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.067313] ata1.01: BMDMA stat 0x25
[  141.067330] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[  141.067334]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[  141.067337]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  141.067349] ata1.01: status: { DRDY ERR }
[  141.068471] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[  141.073758] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.073781] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[  141.073784]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[  141.073788]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  141.073795] ata1.01: status: { DRDY ERR }
[   84.733460] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[   84.733467] ata1.01: BMDMA stat 0x25
[   84.733478] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[   84.733480]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[   84.733482]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[   84.733487] ata1.01: status: { DRDY ERR }
[   84.734188] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[   84.735183] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[   84.735195] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[   84.735197]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[   84.735199]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[   84.735203] ata1.01: status: { DRDY ERR }
[  141.646573] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.646583] ata1.01: BMDMA stat 0x25
[  141.646601] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[  141.646604]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[  141.646608]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  141.646615] ata1.01: status: { DRDY ERR }
[  141.647731] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[  141.648708] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.648727] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[  141.648731]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[  141.648734]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  141.648742] ata1.01: status: { DRDY ERR }
[   65.519143] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[   65.519149] ata1.01: BMDMA stat 0x25
[   65.519158] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[   65.519160]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[   65.519161]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[   65.519165] ata1.01: status: { DRDY ERR }
[   65.519992] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[   65.522520] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[   65.522530] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[   65.522532]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[   65.522534]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[   65.522537] ata1.01: status: { DRDY ERR }
[  142.479986] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.479997] ata1.01: BMDMA stat 0x25
[  142.480015] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[  142.480018]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[  142.480022]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  142.480029] ata1.01: status: { DRDY ERR }
[  142.481609] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[  142.482206] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.482225] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[  142.482229]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[  142.482232]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  142.482239] ata1.01: status: { DRDY ERR }
[  142.820805] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.820816] ata1.01: BMDMA stat 0x25
[  142.820834] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[  142.820837]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[  142.820841]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  142.820848] ata1.01: status: { DRDY ERR }
[  142.822358] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[  142.822944] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.822963] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[  142.822967]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[  142.822970]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  142.822978] ata1.01: status: { DRDY ERR }
[  142.911668] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.911680] ata1.01: BMDMA stat 0x25
[  142.911697] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[  142.911701]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[  142.911704]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  142.911712] ata1.01: status: { DRDY ERR }
[  142.912893] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[  142.922778] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.922801] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[  142.922805]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[  142.922808]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  142.922816] ata1.01: status: { DRDY ERR }
[   66.427234] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[   66.427241] ata1.01: BMDMA stat 0x25
[   66.427249] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[   66.427251]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[   66.427252]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[   66.427256] ata1.01: status: { DRDY ERR }
[   66.427935] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[   66.428882] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[   66.428890] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[   66.428892]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[   66.428893]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[   66.428897] ata1.01: status: { DRDY ERR }
[  144.108090] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  144.108102] ata1.01: BMDMA stat 0x25
[  144.108119] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[  144.108123]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[  144.108126]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  144.108134] ata1.01: status: { DRDY ERR }
[  144.109315] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[  144.109947] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  144.109966] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[  144.109970]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[  144.109973]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  144.109980] ata1.01: status: { DRDY ERR }
[  144.230333] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  144.230344] ata1.01: BMDMA stat 0x25
[  144.230361] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[  144.230365]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[  144.230368]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  144.230376] ata1.01: status: { DRDY ERR }
[  144.231957] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[  144.233432] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  144.233451] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[  144.233455]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[  144.233458]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  144.233466] ata1.01: status: { DRDY ERR }
[  144.784680] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  144.784691] ata1.01: BMDMA stat 0x25
[  144.784709] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[  144.784712]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[  144.784716]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  144.784723] ata1.01: status: { DRDY ERR }
[  144.785771] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[  144.786761] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  144.786780] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[  144.786783]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[  144.786787]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  144.786794] ata1.01: status: { DRDY ERR }
[  145.946069] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  145.946080] ata1.01: BMDMA stat 0x25
[  145.946098] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[  145.946101]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[  145.946105]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  145.946112] ata1.01: status: { DRDY ERR }
[  145.947222] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[  145.951947] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  145.951970] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[  145.951973]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[  145.951977]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  145.951985] ata1.01: status: { DRDY ERR }
[  146.090164] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  146.090175] ata1.01: BMDMA stat 0x25
[  146.090192] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[  146.090196]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[  146.090199]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  146.090207] ata1.01: status: { DRDY ERR }
[  146.091755] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[  146.092465] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  146.092485] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[  146.092488]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[  146.092492]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  146.092499] ata1.01: status: { DRDY ERR }
[  146.296101] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  146.296112] ata1.01: BMDMA stat 0x25
[  146.296129] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[  146.296133]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
[  146.296136]          res 51/50:03:00:60:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  146.296144] ata1.01: status: { DRDY ERR }
[  146.297685] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[  146.298293] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  146.298312] ata1.01: cmd a0/00:00:00:24:00/00:00:00:00:00/b0 tag 0 pio 36 in
[  146.298315]          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
[  146.298319]          res 51/50:03:00:24:00/00:00:00:00:00/b0 Emask 0x1 (device error)
[  146.298326] ata1.01: status: { DRDY ERR }
alessandro@alessandro-laptop:~$ 

questo è quello che mi ha dato con dmesg

Codice: Seleziona tutto

alessandro@alessandro-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04)
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04)
00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 04)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X700 (PCIE)
06:01.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
06:01.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
06:01.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
06:02.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
06:03.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
06:08.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
alessandro@alessandro-laptop:~$ 
mentre questo e quello che mi ha dato con lspci

sto messo male vero???  :'( >:(

Re: ubuntu 8.04 funziona tutto ma boot molto lento

Inviato: domenica 20 luglio 2008, 12:53
da rxvt
Pare tu abbia un problema dell'hd, non verra' caricato correttamente il modulo o che altro.
Sara' per questo che ti carica lento, intanto prova a fare l'aggiornamento dei pacchetti del kernel, probabile risolvi il problema, eventualmente facciamo una ricerca piu' specifica al riguardo.

Re: ubuntu 8.04 funziona tutto ma boot molto lento

Inviato: domenica 20 luglio 2008, 13:14
da lupetto1974
rxvt ha scritto: Pare tu abbia un problema dell'hd, non verra' caricato correttamente il modulo o che altro.
Sara' per questo che ti carica lento, intanto prova a fare l'aggiornamento dei pacchetti del kernel, probabile risolvi il problema, eventualmente facciamo una ricerca piu' specifica al riguardo.
scusa la domanda stupida, ma gli aggiornamenti non li da in automatico ubuntu?

altrimenti come faccio?

Re: ubuntu 8.04 funziona tutto ma boot molto lento

Inviato: domenica 20 luglio 2008, 15:01
da rxvt
Per gli aggiornamenti dovresti avere un'icona nell'area di notifica (solitamente in alto a destra del pannello) visualizzante una freccia rossa, se ci clicchi si avvia update-manager che ti mostra tutti gli aggiornamenti disponibili. In alternativa puoi avviare update-manager dando comando Alt+F2 e scrivendo

gksudo update-manager

Questo tool ti mostra tutti gli aggiornamenti per il software attualmente installato nel tuo computer.

Re: ubuntu 8.04 funziona tutto ma boot molto lento

Inviato: domenica 20 luglio 2008, 15:23
da lupetto1974
rxvt ha scritto: Per gli aggiornamenti dovresti avere un'icona nell'area di notifica (solitamente in alto a destra del pannello) visualizzante una freccia rossa, se ci clicchi si avvia update-manager che ti mostra tutti gli aggiornamenti disponibili. In alternativa puoi avviare update-manager dando comando Alt+F2 e scrivendo

gksudo update-manager

Questo tool ti mostra tutti gli aggiornamenti per il software attualmente installato nel tuo computer.
ah ok fatto, ma comunque è lo stesso che sta in sistema>amministrazione
infatti era già tutto aggiornato ed ora?? dato che non so che fare?  :-\

Re: ubuntu 8.04 funziona tutto ma boot molto lento

Inviato: lunedì 21 luglio 2008, 20:40
da lupetto1974
niente? nessuno sa aiutarmi?

Re: ubuntu 8.04 funziona tutto ma boot molto lento

Inviato: sabato 26 luglio 2008, 13:33
da Fr4nc35c070cc1
mi accodo: ho lo stesso problema su un pc che con le due precedenti versioni ubuntu caricava normalmente.....
avvio lentissimo, con errori uguali a quelli sopra citati....

???

Re: ubuntu 8.04 funziona tutto ma boot molto lento

Inviato: sabato 26 luglio 2008, 13:57
da pepeyomat
ciao
Io ho parzialmente risolto.,.. era un problema si inizializzazione della swap
schiacciando alt+F1 durante il caricamento di ubuntu controllate se vedete una frase del tipo
kinit: no resume image
Se avete questo problema ho posstato la soluzione sul mio blog...
http://pepeyomat.blogspot.com/
Ciao fatemi sapere (b2b)

Re: ubuntu 8.04 funziona tutto ma boot molto lento

Inviato: lunedì 11 agosto 2008, 20:29
da Fr4nc35c070cc1
@pepeyomat

ho seguito il tuo post, ma purtroppo l'errore continua a presentarsi  >:(
però in effetti il caricamento è più veloce... è questo che intendevi con 'parzialmente risolto'?