[Usb] Ubuntu non vede proprio il lettore mp3

[kloe]

Ciao a tutti, il mio problema è che ubuntu non vede proprio il lettore mp3 sandisk sansa. Ricordo che i primi giorni me lo vedeva poi nulla.. sarà colpa di qualche aggiornamento? perchè non ho toccato il file fstab, il quale mi riporta

[shadow=red,left]# /etc/fstab: static file system information.
#
#            
proc            /proc          proc    defaults        0      0
# /dev/sda1
UUID=0fa2dcd0-785b-4dec-8749-9593e4442217 /              ext3    relatime,errors=remount-ro 0      1
# /dev/sda5
UUID=27144d95-9322-4387-be22-aab9f61e5f06 none            swap    sw              0      0
/dev/scd0      /media/cdrom0  udf,iso9660 user,noauto,exec,utf8 0      0[/shadow]

Non so che tipo di architettura abbia il lettore (si dice così?) so solo che la marca consiglia come requisiti minimi del sistema win XP o vista, percui non so che riga aggiungere a fstab. Ah, non ve l'ho detto prima, ma sono ai primi passi con Linux.. :-[
Grazie a tutti in anticipo! (good)

[ReMichael]

prova ad inserire il lettore e postare le ultime righe del comando:

Codice: Seleziona tutto

dmesg

almeno vediamo cosa rileva

[mad_dog]

prova a montarlo manualmente...
prima crea un punto di mount

Codice: Seleziona tutto

sudo mkdir /media/USB

e poi montalo in /media/USB

Codice: Seleziona tutto

sudo mount /media/USB /dev/sdb1

okkio potrebbe non essere sdb1 ma 2, 3, 1000 (o mal che ti vada un altra sigla ma mi pare che sia sdb per le memorie usb)

poi per staccarlo fai

Codice: Seleziona tutto

sudo umount /media/USB

se te lo monta e puoi accederci è un qualche problema con l'automount... se non te lo monta il problema è più incasinato...

e nel caso posta il risultato di:

Codice: Seleziona tutto

lsusb

così vediamo almeno se viene visto dal pc

[kloe]

mad_dog ho provato afare come dici e il risultato è questo:

Codice: Seleziona tutto

claudia@claudia-laptop:~$ sudo mkdir /media/USB
[sudo] password for claudia: 
claudia@claudia-laptop:~$ sudo mount /media/USB /dev/sdb1
mount: il mount point /dev/sdb1 non esiste
claudia@claudia-laptop:~$ lsusb
Bus 005 Device 003: ID 0c45:62c0 Microdia 
Bus 005 Device 001: ID 0000:0000  
Bus 004 Device 001: ID 0000:0000  
Bus 003 Device 002: ID 03f0:171d Hewlett-Packard 
Bus 003 Device 001: ID 0000:0000  
Bus 002 Device 004: ID 0461:4d2e Primax Electronics, Ltd 
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 001: ID 0000:0000  
claudia@claudia-laptop:~$ 

ReMichael, ho collegato il lettore (tramite porta usb) e dice questo:

Codice: Seleziona tutto

claudia@claudia-laptop:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Jul 11 23:41:49 UTC 2008 (Ubuntu 2.6.24-19.36-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007fe70000 (usable)
[    0.000000]  BIOS-e820: 000000007fe70000 - 000000007ff00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] 1150MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f7d10
[    0.000000] Entering add_active_range(0, 0, 523888) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   523888
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   523888
[    0.000000] On node 0 totalpages: 523888
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2300 pages used for memmap
[    0.000000]   HighMem zone: 292212 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP signature @ 0xC00F7C60 checksum 0
[    0.000000] ACPI: RSDP 000F7C60, 0024 (r2 HP    )
[    0.000000] ACPI: XSDT 7FE7B369, 0084 (r1 HPQOEM SLIC-MPC  6040000  LTP        0)
[    0.000000] ACPI: FACP 7FE83BF8, 00F4 (r3 INTEL  CALISTGA  6040000 ALAN        1)
[    0.000000] ACPI: DSDT 7FE7C5E7, 759D (r1 HP     30BC      6040000 MSFT  100000E)
[    0.000000] ACPI: FACS 7FE84FC0, 0040
[    0.000000] ACPI: APIC 7FE83CEC, 0068 (r1 HP     30BC      6040000 LOHR       5A)
[    0.000000] ACPI: HPET 7FE83D54, 0038 (r1 HP     30BC      6040000 LOHR       5A)
[    0.000000] ACPI: MCFG 7FE83D8C, 003C (r1 HP     30BC      6040000 LOHR       5A)
[    0.000000] ACPI: TCPA 7FE83DC8, 0032 (r1 HP     30BB      6040000  PTL        1)
[    0.000000] ACPI: APIC 7FE83DFA, 0068 (r1 HP     30BC      6040000  LTP        0)
[    0.000000] ACPI: BOOT 7FE83E62, 0028 (r1 HP     30BC      6040000  LTP        1)
[    0.000000] ACPI: SLIC 7FE83E8A, 0176 (r1 HPQOEM SLIC-MPC  6040000  LTP        1)
[    0.000000] ACPI: SSDT 7FE7C3DD, 020A (r1  HP    30BC         1000 INTL 20050624)
[    0.000000] ACPI: SSDT 7FE7B979, 025F (r1 HP     30BC         3000 INTL 20050624)
[    0.000000] ACPI: SSDT 7FE7B8D3, 00A6 (r1 HP     30BC         3000 INTL 20050624)
[    0.000000] ACPI: SSDT 7FE7B3ED, 04E6 (r1 HP     30BC         3000 INTL 20050624)
[    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[    0.000000] ACPI: DMI detected: Hewlett-Packard
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:15 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 6:15 APIC version 20
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
[    0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519796
[    0.000000] Kernel command line: root=UUID=0fa2dcd0-785b-4dec-8749-9593e4442217 ro quiet splash
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1663.168 MHz processor.
[   10.834788] Console: colour VGA+ 80x25
[   10.834792] console [tty0] enabled
[   10.835063] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   10.835357] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   10.931386] Memory: 2065576k/2095552k available (2177k kernel code, 28692k reserved, 1006k data, 368k init, 1178048k highmem)
[   10.931393] virtual kernel memory layout:
[   10.931394]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   10.931395]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   10.931396]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   10.931397]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   10.931398]       .init : 0xc0421000 - 0xc047d000   ( 368 kB)
[   10.931399]       .data : 0xc0320474 - 0xc041bdc4   (1006 kB)
[   10.931400]       .text : 0xc0100000 - 0xc0320474   (2177 kB)
[   10.931403] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   10.931447] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   10.931600] hpet clockevent registered
[   11.011514] Calibrating delay using timer specific routine.. 3330.15 BogoMIPS (lpj=6660319)
[   11.011538] Security Framework initialized
[   11.011544] SELinux:  Disabled at boot.
[   11.011558] AppArmor: AppArmor initialized
[   11.011562] Failure registering capabilities with primary security module.
[   11.011571] Mount-cache hash table entries: 512
[   11.011699] Initializing cgroup subsys ns
[   11.011704] Initializing cgroup subsys cpuacct
[   11.011714] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
[   11.011722] monitor/mwait feature present.
[   11.011724] using mwait in idle threads.
[   11.011728] CPU: L1 I cache: 32K, L1 D cache: 32K
[   11.011730] CPU: L2 cache: 2048K
[   11.011732] CPU: Physical Processor ID: 0
[   11.011734] CPU: Processor Core ID: 0
[   11.011736] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000
[   11.011745] Compat vDSO mapped to ffffe000.
[   11.011760] Checking 'hlt' instruction... OK.
[   11.027899] SMP alternatives: switching to UP code
[   11.029578] Early unpacking initramfs... done
[   11.373053] ACPI: Core revision 20070126
[   11.373102] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   11.379135] CPU0: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
[   11.379151] SMP alternatives: switching to SMP code
[   11.379878] Booting processor 1/1 eip 3000
[   11.390101] Initializing CPU#1
[   11.466977] Calibrating delay using timer specific routine.. 3326.27 BogoMIPS (lpj=6652552)
[   11.466984] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
[   11.466989] monitor/mwait feature present.
[   11.466992] CPU: L1 I cache: 32K, L1 D cache: 32K
[   11.466993] CPU: L2 cache: 2048K
[   11.466995] CPU: Physical Processor ID: 0
[   11.466997] CPU: Processor Core ID: 1
[   11.466998] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000
[   11.467556] CPU1: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
[   11.467579] Total of 2 processors activated (6656.43 BogoMIPS).
[   11.467775] ENABLING IO-APIC IRQs
[   11.467964] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   11.614917] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[   11.634913] Brought up 2 CPUs
[   11.634937] CPU0 attaching sched-domain:
[   11.634940]  domain 0: span 03
[   11.634942]   groups: 01 02
[   11.634945] CPU1 attaching sched-domain:
[   11.634946]  domain 0: span 03
[   11.634948]   groups: 02 01
[   11.635193] net_namespace: 64 bytes
[   11.635204] Booting paravirtualized kernel on bare hardware
[   11.635674] Time: 18:16:39  Date: 07/27/08
[   11.635701] NET: Registered protocol family 16
[   11.635916] EISA bus registered
[   11.635921] ACPI: bus type pci registered
[   11.636117] PCI: PCI BIOS revision 2.10 entry at 0xfd883, last bus=7
[   11.636119] PCI: Using configuration type 1
[   11.636135] Setting up standard PCI resources
[   11.638674] ACPI: EC: Look up EC in DSDT
[   11.640949] ACPI: BIOS _OSI(Linux) query ignored via DMI
[   11.641390] ACPI: Interpreter enabled
[   11.641393] ACPI: (supports S0 S3 S4 S5)
[   11.641408] ACPI: Using IOAPIC for interrupt routing
[   11.642884] ACPI: EC: non-query interrupt received, switching to interrupt mode
[   11.647457] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[   11.647460] ACPI: EC: driver started in interrupt mode
[   11.647508] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   11.648302] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[   11.648306] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[   11.649843] PCI: Transparent bridge - 0000:00:1e.0
[   11.649891] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   11.650171] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[   11.650301] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[   11.650422] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[   11.650540] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[   11.650671] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[   11.657135] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[   11.657259] ACPI: PCI Interrupt Link [LNKB] (IRQs *3)
[   11.657381] ACPI: PCI Interrupt Link [LNKC] (IRQs *3)
[   11.657501] ACPI: PCI Interrupt Link [LNKD] (IRQs *4)
[   11.657621] ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
[   11.657740] ACPI: PCI Interrupt Link [LNKF] (IRQs 11) *0, disabled.
[   11.657861] ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
[   11.657981] ACPI: PCI Interrupt Link [LNKH] (IRQs *7)
[   11.658133] Linux Plug and Play Support v0.97 (c) Adam Belay
[   11.658167] pnp: PnP ACPI init
[   11.658174] ACPI: bus type pnp registered
[   11.660540] pnp: PnP ACPI: found 11 devices
[   11.660543] ACPI: ACPI bus type pnp unregistered
[   11.660546] PnPBIOS: Disabled by ACPI PNP
[   11.660798] PCI: Using ACPI for IRQ routing
[   11.660800] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   11.706871] NET: Registered protocol family 8
[   11.706874] NET: Registered protocol family 20
[   11.706914] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   11.706918] hpet0: 3 64-bit timers, 14318180 Hz
[   11.707955] AppArmor: AppArmor Filesystem Enabled
[   11.710700] Time: tsc clocksource has been installed.
[   11.710713] Switched to high resolution mode on CPU 0
[   11.710820] Switched to high resolution mode on CPU 1
[   11.734674] system 00:00: iomem range 0xe0000000-0xefffffff could not be reserved
[   11.734681] system 00:02: iomem range 0xe0000000-0xefffffff could not be reserved
[   11.734685] system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
[   11.734687] system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
[   11.734690] system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
[   11.734693] system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[   11.734696] system 00:02: iomem range 0xfed20000-0xfed3ffff could not be reserved
[   11.734699] system 00:02: iomem range 0xfed40000-0xfed44fff could not be reserved
[   11.734702] system 00:02: iomem range 0xfed45000-0xfed8ffff could not be reserved
[   11.734709] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
[   11.734716] system 00:06: ioport range 0x380-0x383 has been reserved
[   11.734719] system 00:06: ioport range 0x680-0x69f has been reserved
[   11.734721] system 00:06: ioport range 0x800-0x80f has been reserved
[   11.734724] system 00:06: ioport range 0x1000-0x107f has been reserved
[   11.734726] system 00:06: ioport range 0x1180-0x11bf has been reserved
[   11.734729] system 00:06: ioport range 0x1640-0x164f has been reserved
[   11.734735] system 00:07: ioport range 0x6a0-0x6af has been reserved
[   11.734737] system 00:07: ioport range 0x6b0-0x6ff has been reserved
[   11.765183] PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
[   11.765185] PCI: Bridge: 0000:00:01.0
[   11.765187]   IO window: disabled.
[   11.765191]   MEM window: dc000000-ddffffff
[   11.765194]   PREFETCH window: c0000000-cfffffff
[   11.765197] PCI: Bridge: 0000:00:1c.0
[   11.765201]   IO window: 2000-2fff
[   11.765206]   MEM window: d8000000-d9ffffff
[   11.765211]   PREFETCH window: d2000000-d3ffffff
[   11.765217] PCI: Bridge: 0000:00:1c.1
[   11.765220]   IO window: 3000-3fff
[   11.765226]   MEM window: d6000000-d7ffffff
[   11.765230]   PREFETCH window: d0000000-d1ffffff
[   11.765237] PCI: Bridge: 0000:00:1c.2
[   11.765240]   IO window: 4000-4fff
[   11.765245]   MEM window: da000000-dbffffff
[   11.765250]   PREFETCH window: d4000000-d5ffffff
[   11.765257] PCI: Bridge: 0000:00:1e.0
[   11.765258]   IO window: disabled.
[   11.765264]   MEM window: de000000-de0fffff
[   11.765268]   PREFETCH window: disabled.
[   11.765286] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   11.765292] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   11.765316] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[   11.765322] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   11.765346] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[   11.765352] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   11.765376] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[   11.765382] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   11.765393] PCI: Enabling device 0000:00:1e.0 (0004 -> 0006)
[   11.765400] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   11.765410] NET: Registered protocol family 2
[   11.802618] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   11.802837] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   11.803295] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   11.803520] TCP: Hash tables configured (established 131072 bind 65536)
[   11.803523] TCP reno registered
[   11.814683] checking if image is initramfs... it is
[   12.489808] Freeing initrd memory: 7308k freed
[   12.489963] Simple Boot Flag at 0x35 set to 0x1
[   12.490670] audit: initializing netlink socket (disabled)
[   12.490684] audit(1217182599.433:1): initialized
[   12.490921] highmem bounce pool size: 64 pages
[   12.493064] VFS: Disk quotas dquot_6.5.1
[   12.493142] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   12.493282] io scheduler noop registered
[   12.493284] io scheduler anticipatory registered
[   12.493286] io scheduler deadline registered
[   12.493297] io scheduler cfq registered (default)
[   12.493410] Boot video device is 0000:01:00.0
[   12.493527] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   12.493566] assign_interrupt_mode Found MSI capability
[   12.493598] Allocate Port Service[0000:00:01.0:pcie00]
[   12.493687] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   12.493746] assign_interrupt_mode Found MSI capability
[   12.493797] Allocate Port Service[0000:00:1c.0:pcie00]
[   12.493835] Allocate Port Service[0000:00:1c.0:pcie02]
[   12.493941] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   12.494001] assign_interrupt_mode Found MSI capability
[   12.494048] Allocate Port Service[0000:00:1c.1:pcie00]
[   12.494083] Allocate Port Service[0000:00:1c.1:pcie02]
[   12.494187] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   12.494246] assign_interrupt_mode Found MSI capability
[   12.494293] Allocate Port Service[0000:00:1c.2:pcie00]
[   12.494333] Allocate Port Service[0000:00:1c.2:pcie02]
[   12.494623] isapnp: Scanning for PnP cards...
[   12.848493] isapnp: No Plug & Play device found
[   12.875735] Real Time Clock Driver v1.12ac
[   12.875973] hpet_resources: 0xfed00000 is busy
[   12.876002] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   12.877275] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   12.877346] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   12.877450] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   12.896592] serio: i8042 KBD port at 0x60,0x64 irq 1
[   12.896598] serio: i8042 AUX port at 0x60,0x64 irq 12
[   12.910349] mice: PS/2 mouse device common for all mice
[   12.910470] EISA: Probing bus 0 at eisa.0
[   12.910477] Cannot allocate resource for EISA slot 1
[   12.910480] Cannot allocate resource for EISA slot 2
[   12.910482] Cannot allocate resource for EISA slot 3
[   12.910484] Cannot allocate resource for EISA slot 4
[   12.910503] EISA: Detected 0 cards.
[   12.910506] cpuidle: using governor ladder
[   12.910508] cpuidle: using governor menu
[   12.910591] NET: Registered protocol family 1
[   12.910618] Using IPI No-Shortcut mode
[   12.910647] registered taskstats version 1
[   12.910762]   Magic number: 0:664:292
[   12.910771]   hash matches device ttyz6
[   12.910821]   hash matches device tty25
[   12.910839] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   12.910841] EDD information not available.
[   12.911022] Freeing unused kernel memory: 368k freed
[   12.922237] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   14.133898] fuse init (API version 7.9)
[   14.152976] ACPI: SSDT 7FE7C11F, 01F6 (r1 HP     30BC         3000 INTL 20050624)
[   14.153197] ACPI: SSDT 7FE7BBD8, 04C2 (r1 HP     30BC         3001 INTL 20050624)
[   14.155031] Monitor-Mwait will be used to enter C-1 state
[   14.155034] Monitor-Mwait will be used to enter C-2 state
[   14.155036] Monitor-Mwait will be used to enter C-3 state
[   14.155185] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   14.155190] ACPI: Processor [CPU0] (supports 8 throttling states)
[   14.155435] ACPI: SSDT 7FE7C315, 00C8 (r1 HP     30BC         3000 INTL 20050624)
[   14.155642] ACPI: SSDT 7FE7C09A, 0085 (r1 HP     30BC         3000 INTL 20050624)
[   14.156569] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[   14.156575] ACPI: Processor [CPU1] (supports 8 throttling states)
[   14.160687] ACPI: Thermal Zone [THR1] (4 C)
[   14.565248] usbcore: registered new interface driver usbfs
[   14.565274] usbcore: registered new interface driver hub
[   14.565435] usbcore: registered new device driver usb
[   14.577485] USB Universal Host Controller Interface driver v3.0
[   14.577548] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[   14.577559] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   14.577564] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   14.577890] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   14.577928] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001800
[   14.578073] usb usb1: configuration #1 chosen from 1 choice
[   14.578097] hub 1-0:1.0: USB hub found
[   14.578102] hub 1-0:1.0: 2 ports detected
[   14.588998] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[   14.589002] Copyright (c) 1999-2006 Intel Corporation.
[   14.653952] SCSI subsystem initialized
[   14.668284] libata version 3.00 loaded.
[   14.679287] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
[   14.679299] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   14.679303] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   14.679329] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   14.679361] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001820
[   14.679473] usb usb2: configuration #1 chosen from 1 choice
[   14.679499] hub 2-0:1.0: USB hub found
[   14.679504] hub 2-0:1.0: 2 ports detected
[   14.783185] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[   14.783199] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   14.783205] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   14.783233] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   14.783269] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[   14.783390] usb usb3: configuration #1 chosen from 1 choice
[   14.783415] hub 3-0:1.0: USB hub found
[   14.783420] hub 3-0:1.0: 2 ports detected
[   14.887054] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[   14.887066] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   14.887071] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   14.887094] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   14.887128] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[   14.887248] usb usb4: configuration #1 chosen from 1 choice
[   14.887275] hub 4-0:1.0: USB hub found
[   14.887280] hub 4-0:1.0: 2 ports detected
[   14.990992] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[   14.991010] PCI: Setting latency timer of device 0000:05:00.0 to 64
[   15.023828] usb 2-1: new low speed USB device using uhci_hcd and address 2
[   15.053151] e1000: 0000:05:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:36:ea:50:87
[   15.112752] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[   15.112813] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[   15.112827] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   15.112831] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   15.112864] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   15.116775] ehci_hcd 0000:00:1d.7: debug port 1
[   15.116782] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   15.116789] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xde304000
[   15.150640] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   15.150780] usb usb5: configuration #1 chosen from 1 choice
[   15.150805] hub 5-0:1.0: USB hub found
[   15.150811] hub 5-0:1.0: 8 ports detected
[   15.254731] ACPI: PCI Interrupt 0000:07:05.0[A] -> GSI 16 (level, low) -> IRQ 16
[   15.254743] PCI: Setting latency timer of device 0000:07:05.0 to 64
[   15.307444] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[de000000-de0007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[   15.311521] ahci 0000:00:1f.2: version 3.0
[   15.311548] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
[   15.311597] ahci 0000:00:1f.2: nr_ports (4) and implemented port map (0x5) don't match, using nr_ports
[   15.311600] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0xf
[   15.550172] Clocksource tsc unstable (delta = -5843638682 ns)
[   15.550191] usb 2-1: device not accepting address 2, error -71
[   15.554332] Time: hpet clocksource has been installed.
[   15.619349] usb 5-4: new high speed USB device using ehci_hcd and address 3
[   15.648287] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
[   15.648294] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
[   15.648301] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   15.648632] scsi0 : ahci
[   15.648841] scsi1 : ahci
[   15.648992] scsi2 : ahci
[   15.649140] scsi3 : ahci
[   15.649225] ata1: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304500 irq 219
[   15.649229] ata2: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304580 irq 219
[   15.649232] ata3: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304600 irq 219
[   15.649235] ata4: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304680 irq 219
[   15.760385] usb 5-4: configuration #1 chosen from 1 choice
[   15.908106] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[009fc0001dffe800]
[   16.190873] usb 2-1: new low speed USB device using uhci_hcd and address 4
[   16.294510] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   16.294950] ata1.00: ATA-7: FUJITSU MHV2120BH PL, 892C, max UDMA/100
[   16.294956] ata1.00: 234441648 sectors, multi 16: LBA48 
[   16.297399] ata1.00: configured for UDMA/100
[   16.307110] usb 2-1: configuration #1 chosen from 1 choice
[   16.350222] usb 3-2: new full speed USB device using uhci_hcd and address 2
[   16.353681] ata2: SATA link down (SStatus 0 SControl 0)
[   16.373500] usb 3-2: configuration #1 chosen from 1 choice
[   16.375363] usbcore: registered new interface driver hiddev
[   16.395145] input: HP Optical USB Mobile Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input2
[   16.407811] input,hidraw0: USB HID v11.10 Mouse [HP Optical USB Mobile Mouse] on usb-0000:00:1d.1-1
[   16.407843] usbcore: registered new interface driver usbhid
[   16.407849] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   16.433740] ata3: SATA link down (SStatus 0 SControl 300)
[   16.455387] ata4: SATA link down (SStatus 0 SControl 0)
[   16.455639] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2120B 892C PQ: 0 ANSI: 5
[   16.456008] ata_piix 0000:00:1f.1: version 2.12
[   16.456026] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[   16.456059] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   16.456118] scsi4 : ata_piix
[   16.456280] scsi5 : ata_piix
[   16.456756] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
[   16.456759] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
[   16.464285] Driver 'sd' needs updating - please use bus_type methods
[   16.466229] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[   16.466273] sd 0:0:0:0: [sda] Write Protect is off
[   16.466279] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   16.466352] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   16.466477] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[   16.466504] sd 0:0:0:0: [sda] Write Protect is off
[   16.466506] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   16.466556] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   16.466560]  sda:<6>ata5.00: ATAPI: Slimtype DVD A  DS8AZH, NH61, max MWDMA2
[   16.814650]  sda1 sda2 < sda5 >
[   16.870012] sd 0:0:0:0: [sda] Attached SCSI disk
[   16.875795] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   16.988900] ata5.00: configured for MWDMA2
[   16.988985] ata6: port disabled. ignoring.
[   16.990890] scsi 4:0:0:0: CD-ROM            Slimtype DVD A  DS8AZH    NH61 PQ: 0 ANSI: 5
[   16.991021] scsi 4:0:0:0: Attached scsi generic sg1 type 5
[   17.003784] Driver 'sr' needs updating - please use bus_type methods
[   17.018557] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   17.018563] Uniform CD-ROM driver Revision: 3.20
[   17.018645] sr 4:0:0:0: Attached scsi CD-ROM sr0
[   17.128388] Attempting manual resume
[   17.128392] swsusp: Resume From Partition 8:5
[   17.128393] PM: Checking swsusp image.
[   17.128590] PM: Resume from disk failed.
[   17.173914] kjournald starting.  Commit interval 5 seconds
[   17.173944] EXT3-fs: mounted filesystem with ordered data mode.
[   26.728600] Linux agpgart interface v0.102
[   26.761647] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   26.796557] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   27.023226] iTCO_vendor_support: vendor-support=0
[   27.068200] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[   27.068346] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[   27.068401] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   27.115263] input: Power Button (FF) as /devices/virtual/input/input3
[   27.135058] ACPI: Power Button (FF) [PWRF]
[   27.135151] input: Power Button (CM) as /devices/virtual/input/input4
[   27.167022] ACPI: Power Button (CM) [PWRB]
[   27.167100] input: Sleep Button (CM) as /devices/virtual/input/input5
[   27.185107] ACPI: Sleep Button (CM) [SLPB]
[   27.185178] input: Lid Switch as /devices/virtual/input/input6
[   27.185461] ACPI: Lid Switch [LID]
[   27.185816] ACPI: AC Adapter [ACAD] (on-line)
[   27.222990] intel_rng: FWH not detected
[   27.366908] ACPI: WMI-Acer: Mapper loaded
[   27.480383] ACPI: Battery Slot [BAT0] (battery present)
[   27.507389] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7
[   27.526585] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   27.528283] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8
[   27.542550] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   28.214778] ricoh-mmc: Ricoh MMC Controller disabling driver
[   28.214782] ricoh-mmc: Copyright(c) Philip Langdale
[   28.214862] ricoh-mmc: Ricoh MMC controller found at 0000:07:05.2 [1180:0843] (rev 1)
[   28.214874] ricoh-mmc: Controller is now disabled.
[   28.258654] nvidia: module license 'NVIDIA' taints kernel.
[   28.652594] sdhci: Secure Digital Host Controller Interface driver
[   28.652598] sdhci: Copyright(c) Pierre Ossman
[   28.652642] sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev 19)
[   28.652661] PCI: Enabling device 0000:07:05.1 (0000 -> 0002)
[   28.652667] ACPI: PCI Interrupt 0000:07:05.1[B] -> GSI 17 (level, low) -> IRQ 17
[   28.652687] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[   28.652695] PCI: Setting latency timer of device 0000:07:05.1 to 64
[   28.652741] mmc0: SDHCI at 0xde000800 irq 17 DMA
[   28.660408] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   28.660415] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   28.660518] NVRM: loading NVIDIA UNIX x86 Kernel Module  169.12  Thu Feb 14 17:53:07 PST 2008
[   28.676303] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0
[   28.676307] iwl3945: Copyright(c) 2003-2007 Intel Corporation
[   28.676417] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   28.676432] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   28.676455] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[   28.746672] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[   28.746701] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   28.817677] Bluetooth: Core ver 2.11
[   28.845078] NET: Registered protocol family 31
[   28.845082] Bluetooth: HCI device and connection manager initialized
[   28.845085] Bluetooth: HCI socket layer initialized
[   28.924903] Bluetooth: HCI USB driver ver 2.9
[   28.927150] usbcore: registered new interface driver hci_usb
[   29.018331] input: PC Speaker as /devices/platform/pcspkr/input/input9
[   29.095800] Linux video capture interface: v2.00
[   29.185471] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
[   29.186827] usbcore: registered new interface driver uvcvideo
[   29.186831] USB Video Class driver (v0.1.0)
[   29.733728] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
[   29.799365] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[   30.311039] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[   30.311433] wmaster0: Selected rate control algorithm 'iwl-3945-rs'
[   30.641231] lp: driver loaded but no devices found
[   30.754508] Adding 4803392k swap on /dev/sda5.  Priority:-1 extents:1 across:4803392k
[   31.295159] EXT3 FS on sda1, internal journal
[   31.723909] NET: Registered protocol family 17
[   32.647546] ip_tables: (C) 2000-2006 Netfilter Core Team
[   33.021249] wlan0: Initial auth_alg=0
[   33.021257] wlan0: authenticate with AP 00:0d:54:f9:45:7b
[   33.154530] No dock devices found.
[   33.219664] wlan0: authenticate with AP 00:0d:54:f9:45:7b
[   33.224685] wlan0: RX authentication from 00:0d:54:f9:45:7b (alg=0 transaction=2 status=0)
[   33.224688] wlan0: authenticated
[   33.224691] wlan0: associate with AP 00:0d:54:f9:45:7b
[   33.229923] wlan0: RX AssocResp from 00:0d:54:f9:45:7b (capab=0x431 status=0 aid=4)
[   33.229928] wlan0: associated
[   34.033415] apm: BIOS not found.
[   34.189007] ppdev: user-space parallel port driver
[   34.353501] audit(1217182628.957:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5328 profile="/usr/sbin/cupsd" namespace="default"
[   35.423271] NET: Registered protocol family 10
[   35.423874] lo: Disabled Privacy Extensions
[   35.906660] Bluetooth: L2CAP ver 2.9
[   35.906667] Bluetooth: L2CAP socket layer initialized
[   35.976175] Bluetooth: RFCOMM socket layer initialized
[   35.976192] Bluetooth: RFCOMM TTY layer initialized
[   35.976195] Bluetooth: RFCOMM ver 1.8
[   46.703234] wlan0: no IPv6 routers present
[   53.600874] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   53.619160] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   54.411671] wlan0: Initial auth_alg=0
[   54.411677] wlan0: authenticate with AP 00:0d:54:f9:45:7b
[   54.416681] wlan0: RX authentication from 00:0d:54:f9:45:7b (alg=0 transaction=2 status=0)
[   54.416684] wlan0: authenticated
[   54.416687] wlan0: associate with AP 00:0d:54:f9:45:7b
[   54.421884] wlan0: RX AssocResp from 00:0d:54:f9:45:7b (capab=0x431 status=0 aid=4)
[   54.421888] wlan0: associated
[   54.423983] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   64.482599] wlan0: no IPv6 routers present
[   70.526509] CPU0 attaching NULL sched-domain.
[   70.526518] CPU1 attaching NULL sched-domain.
[   70.542294] CPU0 attaching sched-domain:
[   70.542303]  domain 0: span 03
[   70.542307]   groups: 01 02
[   70.542312] CPU1 attaching sched-domain:
[   70.542315]  domain 0: span 03
[   70.542318]   groups: 02 01
[ 4127.154588] NVRM: Xid (0001:00): 6, PE0000 0200 05000000 00000054 00ffffff 03200000
[ 4127.172496] NVRM: Xid (0001:00): 36,  L1 -> L0
[ 7768.758201] usb 5-1: new high speed USB device using ehci_hcd and address 5
[ 7771.293995] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[ 7771.294009] hub 5-0:1.0: hub_port_status failed (err = -32)

immagino che il problema sia + di un semplice mount...vero?

[kloe]

ok ora la vede...

Codice: Seleziona tutto

claudia@claudia-laptop:~$ lsusb
Bus 004 Device 001: ID 0000:0000  
Bus 003 Device 002: ID 03f0:171d Hewlett-Packard 
Bus 003 Device 001: ID 0000:0000  
Bus 002 Device 005: ID 0c45:62c0 Microdia 
Bus 002 Device 004: ID 0461:4d2e Primax Electronics, Ltd 
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 002: ID 0781:7432 SanDisk Corp. 
Bus 001 Device 001: ID 0000:0000 

che fare?
con sudo rmmod ehci_hcd la mostra sulla scrivania, inizia a caricarsi e accedo ai file, posso anche aggiungerli..
però è strano perchè tutte le altre 100 canzoni non le vede.. che posso fare? ho cercato io giro ma son riuscita  ad arrivare solo fin qui..